Can multiple transducer be handled by single datalogger

I have 3 presure guages generating 0-20mA analog signal and one differential pressure transducer also generating 0-20 mA signal. I need to maintain a log of all pressure readings. In this regard I need to have a datalogger which can translate my analog signal into digital format so that Labview will display and maintain record.
In this regard I would like to ask that do I need to buy only 1 datalogger or 4 dataloggers for all the pressure devices.
Sorry if I ask very basic question but I am far away from the field of electronics/instrumentaion.

Most NI data acquisition devices are multichannel and you would only need to buy 1. The least expensive is the 6008. With 4 differential inputs, it just meet that need.

Similar Messages

Multiple file links in a single page: A better way to/efficient way to handle ?

Aloha Everyone!
I would like to ask the community how they have handled multiple file links in a single page. Sort of a pseudo database of files.
Here is the webpage I have been working on:http://huichawaii.org/
Here is what I have done to show files so far:
old version:http://huichawaii.org/proceedings---2012-education%2c-math---engineering-technology.html
new version: http://huichawaii.org/ahs2013-proceedings.html
The website works best in Chrom or Firefox, still have to convert the flash header to an edge animate .
Mahalo in advance for everyone's input!

Depending on what other text you might have, you could use the data list component.
To get the text to have underlines, you will need to edit the repeated item. You can also adjust colors and fonts as well. The default rollover and selected states will probably not be the UI that want, so make sure you change those as well.
Now for the interactivity, select the datalist, and use the interactions panel, choose "On Select", then "Go To Url", the trick is to make sure the "When a specific item is selected" is also set. Here are the basic settings to get your links working:
Add new interactions for each item you want to be functional.

Can you have multiple itunes accounts on a single computer? want to open a separate one for our daughter (but we will manage it).

just got our daughter a new iTouch, but want to try and keep hers separate from our iPhone stuff. can you have multiple iTunes accounts on a single computer?

This is all i know but all you can do is just creat a new one for them both and send all the stuff to the one think u can do that i hope it helps

How Can I Use Multiple Weblogic Instances in a Single OS

Hello Everyone,
Actually I have to install Some different applications. Few of them need weblogic 10.3.6 and others need 10.3.4. The OS am using is Oracle Enterprise Linux 5.
Now I am able to install 2 separate(One of 10.3.4 and 10.3.6) instances with two different users,In two different directories.
I have installed the weblogic 10.3.6 version with a user webadmin and installed node manager with port 5556. This is working fine.
The main problem here is :
In the second instance (10.3.4 ) installed with a a different user and gave the port number to NodeManager as 1600 and its not getting started. Its throwing error and also after some errors in the terminal am able to see that its reverting to port number 5556 only.
What might be the issue?
I have to install 2 different versions of weblogic in a single Server. But am failing with NodeManager. What Can I do to have multiple weblogic instances with multiple versions in a single server ?
Can anyone suggest a resolution for this please ?
Thanks in advance.

Pl do not spam these forums with multiple posts - How Can I Use Multiple Weblogic Instances in a Single OS

How can I allow multiple users to edit a single shared iCal calendar?

Is it possible to allow multiple users to edit a single shared iCal calendar? I also want to provide different permissions to those users. Is this possible through .MAC? Is it possible on Mac OSX Server?

I would like 2 agenda synced through .Mac but it does not work.
I have 2 computers and 2 laptops. A very simple agenda with 3 calenders. Myself my partner and the office calender. I want to publish my calender and that of my partner. The office calender I would like to sync so that we can change the office calender at any location.
I set up sync only for iCall and have a .Mac account. When I change anything on any of the calenders in iCall nothing happens on any of my other locations. Even though the locations are registered as synced. I can see the sync wheel turning but at the end of it the calenders are not synced.
At this moment I fully understand the publish and unpublished calenders but have no clue what so ever what syncing does for iCall. There seems to be no functionality to it. It does not transport any calender info over .Mac. There is no visable check to see what is happening and the process of syncing is not transperent. Lots of my friends go to me for advise on Apple issues but as far as sync wether iCall or Addressbook I always tell them sync does not work and I have no clue why others have it working. I haven't met any people here in Holland either that got in working. I suppose with iCall you have to get third party software to share calenders editable calenders. Really hopeless situation, wish Apple would just have a manual stating what sync can do and what it can not. Hours wasted on this issue trying to get it to work.
Hope anyone here can help out.

Can you combine multiple itunes accounts into a single one?

I set up separate itunes accounts for my (2) sons (8 & 10) because one had an iPod and the other had an iTouch.
They just got an iPad for X-mas (that they'll share) ... I want to set up the iCloud and create a "joint" account.
Is it possible to combine their multiple itunes acounts into a single account?

This is all i know but all you can do is just creat a new one for them both and send all the stuff to the one think u can do that i hope it helps

Can I sign in with multiple apple IDs in a single apple device without deleting my previous one?

can I sign in with multiple apple IDs in a single apple device without deleting my previous one?

Hi swagyoloswag,
Welcome to the Apple Support Communities!
There are several different services that require signing into an Apple ID to use on your iOS device. You can sign into different Apple IDs for different services on your iPhone. For example, Apple ID #1 for iCloud and Apple ID #2 for iTunes & App Store. You cannot sign into the same service with two different Apple IDs at the same time. The attached article has a list of services that are accessible with your Apple ID.
Where can I use my Apple ID? - Apple Support
Cheers,
Joe

Can We have multiple SLEDs maintained in a single Batch

Hi all
Can we have multiple SLEDs maintained within a single batch. This SLED would be maintained at Quant level. One batch will have multiple quants and would be maintained in separate bins. However in LX27 i should see both the SLED for the same batch.
Please Help
Thanks & Regards
Jajati

My sources tell me that batch management is not a part of Retail but of logistics and unfortunately I am not able to move your post to a better thread. However, I suggest you please do a search of all forums using "batch management" as your search criteria.You'll see loads of hits. You might find your answer there or a better place to post your question.

Can Windows Server Backup spread a single backup job across multiple disks if they are not set up as a virtual disk?

This may be a dumb question, but I can't seem to find any definitive information after having done many, many searches. Short question is - can Windows Server Backup spread a single backup job across multiple disks if they are not in a storage
pool or some other RAID/JBOD structure?
Background:
I'm running Server 2012 Essentials with all Windows Updates installed. I have been backing up approx 2.8TB of data (Bare Metal Recovery, C:, S: (shared folders), and system reserved) for the past year+ onto a storage pool made up of two-2TB external
USB drives. Backup is slow (takes approx 1.5 days to complete), but generally works. Not surprisingly I was constantly getting capacity low messages so I decided to increase my backup storage pool by adding a 3TB drive and another spare 750GB drive
for a total of 7.75TB. Instead of having four separate external USB enclosures, I bot a 4-bay enclosure - Startech.com model #S3540BU33E to simplify this (or so I thought!).
The first problem I had was adding the two new drives to the existing storage pool. I think that is because the Startech uses a JMicron USB controller that reports identical uniqueid's for all drives so only one shows up in the GUI interface for creating storage
pools. After doing research on this, I set up a new storage pool and virtual disk using all four drives via Powershell and thought I was good. However, when the backup ran, it failed after filling the first drive, saying there was no remaining capacity. In
reality there were three remaining empty drives and there storage pool reported almost 5TB of avail capacity. I assumed this was due to the identical uniqueid issue so I decided to try a different tactic.
Instead of using a storage pool that combines all four disks into one virtual disk, I just added each of them to Windows Server Backup as individual drives thinking it would manage them collectively. I.e., when a drive filled up during a particular backup,
it would just start using the next drive and so on. Apparently this was a foolish assumption because the backup failed again as soon as the first disk filled up.
So now I don't know if this is still an issue with the identical uniqueid's or if Server Backup actually can't spread a single backup across multiple individual drives that aren't in a pool or other virtual disk implementation. Hence, my original question.
My guess is that it does *not* spread them across individual disks, but I just wanted to get confirmation.
Thanks

Mandy,
Thank you for following up on my question.
Unfortunately the article you referenced doesn't address what I am trying to accomplish.
The article focuses on saving the same backup job to multiple disks and rotating the disks between on and offsite for enhanced protection. However, it still requires that an individual backup job fits on a single disk.
What I am trying to determine is if a single backup job can span across more than one physical disk (during the backup process) without those physical disks being in some type of virtual disk implementation (e.g., storage pool, RAID, etc.).
Thanks,
Gerry

Can you have multiple contact forms in a single Muse site?

I have a site created in Muse that needs to use multiple contact forms of a sort. One is a simple contact form. Two others are sign up forms. In two of the three forms I have to separate the First and Last names. Also in those there are multiple Custom fields and Message fields.
The original simple contact form is working fine and has been. However, I modified one of the pages by adding a second form, the first of the two sign-up forms. It looked great in Muse, but when uploaded to the site, all of the fields were gone, leaving only the Labels in a single paragraph.
Does this mean I can't have multiple contact forms in a single site? If I actually, can, then what might have caused the problem? And what could you suggest for me to try to fix it?
Thank you,
Laura

Thank you for the information, but I cannot find anywhere in help where to find the field names (if that is my problem). I changed all the labels and the corresponding text inside the field (remember, Muse does not give access to code as far as I can tell). When I preview the page in a browser (using FireFox as default, but also tried with IE), everything looks good. When I export to html and open the index.html on my computer, everything still looks great. But when I FTP the page to the website, this is what I get:
First Name:RequiredRescuer Email:RequiredOrganization (if any):RequiredSubmitting Form...The server encountered an error.Form received.Geographic Areas Covered:RequiredRescuer Cell Phone:RequiredRescuer Home Phone:RequiredRescuer Home Address:
RequiredRescuer City:RequiredRescuer State:RequiredRescuer Zip code:RequiredRescuer Country:RequiredVeterinarian Name:RequiredVet Address:RequiredVet City & State:RequiredVet Phone:RequiredRequiredServices Offered:RequiredAdditional Info About You:Required Rescuer (available to general public) RequiredVolunteer (available only to Rescuers)RequiredPhoneRequiredEmailRequiredOtherRequiredLast Name:RequiredImage Verification:Required
How would you prefer to be listed?
How would you prefer to be contacted?
However, this is how it looks on the preview:
So, what is my problem? And how can I fix it?
Thank you,
Laura

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book format to see the multiple view, spread view, or single view. I can no longer see my book although I still see the collection with 418 photos

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on. I can no longer see my book although I still see the collection with 418 photos under collections. What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos. It is like the new empty template is somehow covering it up. How do I get back to the book I have been working on?

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

Can I use Visual Basic to covert form user data from multiple .pdf files to a single .csv file?

Can I use Visual Basic to covert form user data from multiple .pdf files to a single .csv file? If so, how?

You can automate Acrobat using IAC (InterApplication Communications), as documented in the Acrobat SDK. Your program could loop through a collection of PDFs, load them in Acrobat, extract the form data from each, and generate a CSV file that contains the data.
Acrobat can also do this with its "Merge Data Files into Spreadsheet" function, but this is a manual process.

Can I have multiple TFS instances use a single SSRS installation

Can I have multiple TFS instances use a single SSRS installation?
Thanks

Hi Kim,
According to your description, you have multiple TFS instances using one Reporting Services instance. Right?
For installing TFS, to use a named instance with Team Foundation Server, you must install SQL Server by using a named instance, or move or restore Team Foundation Server data to a named instance, or create a team project collection on a named instance. Please
refer to the link below:
Work with SQL Server Named Instances
Reference:
Understanding SQL Server and SQL Server Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Can multiple Airport Expresses be connected via ethernet to an Airport Extreme to extend a single WiFi Network?

I am a big fan of both the Airport Extreme and Airport Express. In my work environment, I need to create a good quality single wireless network around 2 large aircraft hangars and some offices at the perimeters. We have a good quality wired Cat5e ethernet network extended between the buildings and offices now. Is this possible and does it seem like a good practical solution? I think that 4 or 5 Airport expresses would easily provide good wireless coverage in the needed areas.

Can multiple AirPort Expresses be connected via ethernet to an AirPort Extreme to extend a single WiFi Network?
Yes, this will work just fine as long as any individual Ethernet cable run will not exceed much over 330 feet or about 100 meters.

Nokia lumia 710 battery can,t handle a single day

Nokia lumia 710 battery can,t handle a single day

You may try using the tabs when you go to IE > (...) as I think it's more convenient.

Can multiple transducer be handled by single datalogger

Similar Messages

Maybe you are looking for