Can multiple TV be used?

Can more than one TV be used on one home network? I'm thinking of buying one for each TV in the house. Thanks.

I believe it's up to 5 TV's per itunes instance, so, you can have as many as you like.
http://www.apple.com/legal/itunes/us/service.html
iii) You shall be authorized to use the Products on five Apple-authorized devices at any time, except in the case of Movie Rentals, as described below.

Similar Messages

Can multiple APEX application use the same parsing schema?

Hi,
I have 4.2 APEX thru pl/sql Gatewat, 11gr2 DB and using theme 24.
Due to the APEX limitation for version control I would be splitting 1 big ERP applications into 24 different APEX applications and each application would be considered as 1 unit for version control.
I have about 800 tables and I would assume that all of these would need to be stored in 1 schema since a lot of these table are linked thru FK.
Can I have multiple APEX APPS using the same parsing schema? or is there a better way to do this?
Thanks in advance!

Hi,
Multiple applications can have same (one) parsing schema.
You can test that on e.g. apex.oracle.com, where normally you have only one schema and you create multiple applications and all use that same schema.
Regards,
Jari
My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
Twitter: http://www.twitter.com/jariolai
Edited by: jarola on Jan 28, 2013 7:15 PM

Can multiple Virtual Devices use the same IVI Driver Sessions?

I am using Switch Executive 2.0 and I'm having problems creating multiple Virtual Devices.
I have created a virtual device on a development computer that has no hardware connected to it. This virtual device uses specific drivers to simulate the devices. The problem I'm having is that when I create a second virtual device and try to add the same IVI Switches as the first Virtual device, I'm getting the following error:
An error has occurred while attempting to access the device deviceA_ivi.
Error -223116 occurred:
Internal Software error occurred in Switches software. Please contact National Instruments Support.
File name: .\source\mxsWrappers\tMXSObject.cpp
Line Number 192:
Status Code: -223116
Can someone please explain why?

Can you please elaborate on how did you create those simulated devices? Namely, what does your IVI configuration look like? What does the driver session for the logical name look like? What's the software module? What's the hardware module? What is the driver setup string, and what is the simulation mode for the device in question?
-Serge
Srdan Zirojevic

How can multiple family members use one account?

My children have iphones, ipads, ipods and mac books, my problem is how do you use home sharing with the devices and not get each others data. My Husband just added his iphone to the account and got all of my daughters contacts. I understand they could have there own accounts but if i buy music on itunes and both children want the same song, I don't feel i should have to pay for it twice. Is there away we can have home sharing on the devices and they can pick and choose what they want? and is this icloud going to make it harder to keep their devices seperate?

My children have iphones, ipads, ipods and mac books, my problem is how do you use home sharing with the devices and not get each others data. My Husband just added his iphone to the account and got all of my daughters contacts. I understand they could have there own accounts but if i buy music on itunes and both children want the same song, I don't feel i should have to pay for it twice. Is there away we can have home sharing on the devices and they can pick and choose what they want? and is this icloud going to make it harder to keep their devices seperate?

How can multiple users simultaneously use 1 library?

We have 3 computers in our home and have our music on a networked drive, with on each computer an itunes library. We would like to have 1 itunes library on the networked drive, that each of the computers can access simultaneously. How can we achieve this?

The Wine Bug wrote:
How can we achieve this?
only one instance of iTunes @ a time can access the same library, sorry.
you should be able to +work around+ the problem using _*Home Sharing*_.
JGG

Can multiple web pages use the same cookie?

I have an applet that will reside in several different web pages. The applet creates a cookie that saves user preferences and loads them when the user next uses the applet. The problem is that I want the same cookie to load when the user views the same applet at a different IP Address. Is this possible? If so, how? I am currently using the netscape JSObject stuff to write and read my cookie.
Thanks,
Derek

Sorry, you cannot access cookie across domains.
If being able to access same cookie from different pages in the same domain satisfies you need, read on.
Let's suppose you have two html files kept on your server as follow::
MyHTML/main.html
MyHTML/subDir/A.html
Now, let say that when you save the cookie, the path is not specified. A.html will not be able to access the cookie set by main.html. However, if you specified PATH=/ (along with other values and expiry date-and-time), both html files will be able to access the same cookie via the document.getMember method.
This is more of a JavaScript question than a Java question and you might want to pay a visit to the link below:
http://forums.internet.com/WebX?[email protected]^[email protected]
you can go to the bottom of that page, click search and type in cookie and you'll see a lot of Q&A on the topic.
Good Luck
V.V.

Can multiple OracleIDs be used to access datatase in a single HTMLDB app?

Hi,
In one of the apps we're looking to put together (w/ HTMLDB), we currently control database access using Fine-Grained-Access (with policies on tables that generate WHERE predicates based on the Oracle UserID in the session context). The way we currently have HTMLDB set up, it seems to be using a single "proxy" ID (HTMLDB_PROXY_USER) as the means of accessing the database, which means FGAC can't work.
Can this be configured to use other UserIDs when accessing/querying the db?
And...if so, can those IDs be specified somehow, either programmatically or at login time?
Thanks,
Jim Carter

Helps some more...tks...
So - is it safe to assume that the "v()" function is an element of HTMLDB that is installed and made public when HTMLDB is installed then?
Reason I ask is because we are thinking we could modify our existing predicate logic to check for the existence of the APP_USER value, and if it exists, use that instead of the SYS_CONTEXT() call, in our predicate generation function. However, seems like we'll also need some check as to whether the "v" function exists (ie. whether HTMLDB is installed), since the policy might be running in an environment where the HTMLDB app wasn't installed. But to even be able to compile Or, even where HTMLDB was installed, the query could be coming from a connection outside of the HTMLDB app. Does that sound reasonable?
Further, whether we use the existing SESSION_USER context var or the APP_USER one is really no big deal. The bigger question seems to come from mgmt of the user accounts used to access the application. Ideally, we want to be able to support access to the tables, either from the HTMLDB app or from external points (SQL*plus, Discoverer, etc). So the least common denominator seems to be Oracle (database level) UserIDs. However, can an HTMLDB app authenticate
using actual Oracle database UserIDs? That is, delegate the authorization to the database itself? And if it does, will the UserID be available via the APP_USER var, or some other...?
Tks,
Jim
BTW - If your willingness to help is any indication of the support on this board, that could well be the final selling point in deciding to use this technology - in other words, thanks a lot!

MapBuilder Base Maps - Can multiple connections be used?

Hi all,
I'm a complete MapViewer and Oracle newbie, and instead have a GIS/cartography background. I am currently looking to design an enterprise wide mapping service using MapViewer middleware.
I have built up a base map using MapBuilder containing various raster and vector layers held within an Oracle DB, but i now need to add an address data layer which is held on a seperate Oracle DB and therefore requires a separate connection with MapBuilder. My first question then is, is it possible to build a single base map in MapBuilder that include's geometry/georaster themes from more than one DB source?
Thanks in advance for any advice provided,
Robin Burchfield

Hi Robin,
no. Basemap definitions use themes that are in the same schema. But you are able to add individual themes based on tables from different schemas.
Joao

How can i create multiple accounts but use the same itunes?

how can i create multiple accounts but use the same itunes?

Hi iCloud is Making Me Go Crazy,
You will need to create a new Apple ID for your GameCenter and iCloud services. You can continue to use the current Apple ID you share with your Mom for access to iTunes Store purchases if you wish.
Using your Apple ID for Apple services
http://support.apple.com/kb/HT4895
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Cheers,
- Judy

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Can multiple computers in one office use the same Adobe ExportPDF subscription?

Hi urinutrioned,
An ExportPDF subscription is tied to a single Adobe ID and password, so it's meant for a single user to access.
Best,
Sara

Can Multiple ipods use the same computer/itunes program

I recently purchased two ipods for different family members. Can both be used on the same computer. I seem to remember seeing a blurb in the user agreement for itunes that said the program was only for one ipod. Can anyone elaborate?

When the iPods belong to different people, there are basically three ways of using multiple iPods on a computer and these involve:
a) Sharing a single iTunes library
b) Creating Multiple Libraries in a single user account
c) Creating multiple user accounts.
Note: When you are sharing an iTunes library, you don't have to set each iPod to update in the same manner, you can mix and match from the options below as each iPod has it's own update settings
Sharing a Library and/or User Account
If you want to share the one library, you can set either or all of the iPods so that they only get updated with only certain playlists (you can update from more than one if you wish): Loading songs onto iPod automatically - Windows
Choosing the update option "Sync Music - Selected playlists" allows you to create a playlist specifically for the iPod and drag the tracks you want into it. If you tire of the list and want to change it, you just add or remove the songs you don't want. The ones you take out out remain in the library to be used some other time if you choose. You can read more about playlists at these links:
iTunes: Creating playlists of your favorite songs
How to create a Smart Playlist with iTunes
Or you can choose to update any or all of the iPods manually and just drag whatever content you want to them: Managing content manually on iPod
Loading the iPod shuffle differs slightly but it can still be used with the others, for details have a look at this page: Loading songs onto iPod shuffle - Windows
Multiple Libraries
It's also possible to have multiple libraries in a single account. To create or access a second (or more) library, hold down the Option key (or Shift key in Windows) when launching iTunes 7. In the resulting dialogue you will get the option to create a new library or navigate to the other Library.
Note: You can only have one Library open at a time and iTunes will default to the last library opened if you don't use the keyboard command to choose one. This can prove tricky when using multiple iPods, if you don't use the keyboard command you can risk syncing to the wrong library: Using multiple iTunes libraries -Windows
*Separate User Accounts*
Another option is to create a separate User account for each person on your PC or Mac. Different accounts by definition would give you completely separate libraries. Each account has it's own iTunes folder, Library and iTunes Music folder and you load it with CDs etc just as you did with your original one. The iPod can be set to update however the owner chooses, sync all, manual or sync specific playlists
I don't use Windows so I can't give you a step by step on that one, however I can point you to another web page which should help you out. You can read about Windows user accounts here: Create A New User Account In Vista

Multiple questions about using iWeb '09 with my Host Excellence, GoDaddy & Storenvy Accounts. Can you Help?

Hello, my name is Luis Diaz and I have always appreciated the help here in the iWeb community. I've been using iWeb for a long time. For some reason my usernames are not working lately - LuisDiazArt or RabidArt)
I updated my domain service with Host Excellence before MobileMe expired and thank you guys for the help with that. So far it's been a flawless service and because of that I'm very happy. I also have all my domains in GoDaddy. They have been very helpful
Okay I'm going to try to explain my current problem. I'm trying to create a subdomain in GoDaddy for my website: LuisDiazArt.com
I went and added a Subdomain in the Control Panel as: store.LuisDiazArt.com The subdomain suppose to mask my store: luisdiaz.storenvy.com
I thought by adding this subdomain it would make all the addresses look similar (and more clean) just in case someone gets lost along the way.
So what's happening after I waited an hour is I'm getting: http://store.luisdiazart.com/LuisDiazArt.com/Art_of_Luis_Diaz_%7C_LuisDiazArt.co m.html
I'm getting the huge and familair long addresses and it is not pointing to my store, but to the homepage.
Did I do something wrong or do I not understand something fully about subdomains? I thought you can make a subdomain point to another site. Perhaps it can't be done the way I'm thinking about this.
So to fix this issue I am thinking about making a duplicate website with a different domain name (RabidArt) and mask it with LuisDiazArt (this is site name I use on business card and everything else). After that make a subdomain with the same: http://store.luisdiazart.com
Perhaps this may fix the problem.
So to do this I may need to add another site onto my account (Basic and not Business) on HostExcellence.
So my other questions are:
Can I have multiple domains or websites using iWeb on a Basic Host Excellence Account? I checked out a few websites, but couldn't really find out if I can have multiple domains/websites using iWeb on Host Excellence with my current account.
I do know how to make a new duplicate site, but do you publish it the same way as you would with the regular site or do I have to so something different?
Hopefully the problem can be fixed not having to do a new site and maybe it was something I did wrong when I added a subdomain.

To add more domains you need to upgrade your account.
To have a sub domain for your store you need to create a separate site in iWeb and upload these files to the store.luisdiazart.com folder.
The files for the main site go in the luisdiazart folder.
Use an external hyperlink to link one to the other.

HT204053 Can multiple people use the same Apple ID for their own devices?

Can multiple people use the same Apple ID for their own devices? I just set up my IPhone 4S (first time user) using the same Apple ID as my daughters and now we receive each others texts, do I need to set up my own Apple ID account?

Yes, you can. In fact it's recommended that you use different IDs for iMessage, FaceTime and iCloud. You can still share the same ID for iTunes without any issues.
You are getting each other's text messages because you're using the same ID for iMessage. To fix this, one of you should go to Settings>Messages>Send & Receive, tap the ID, sign out, then sign in with a different ID. To avoid getting each other's FaceTime calls, do the same thing in Settings>FaceTime.

Export to PDF - Can a single report (rpt file) create multiple PDF files using the export command?

Post Author: markeyjd2
CA Forum: Exporting
Greetings forum members,
My question is, in its entirety: Can a single report (rpt file) create multiple PDF files using the export command, ideally one PDF file per DB record?
In my case; I have a Crystal Report that reads data from a DB table containing ~ 500 records. When I export the report to a PDF file, I get one PDF file, with ~ 500 pages.
What I would like to do is export the report to ~ 500 individual PDF files; One file per DB record. The file names would be based on the table's primary key.
Is this possible?

Post Author: Micha
CA Forum: Exporting
Hi,
you need some lines of code, but its easy. Dependend on how to start the generation of your 500 PDFs, you can write an ASP page and start it via Web Browser, or a Windows Script and start it via scheduled job...
Here's an abstract of the ASP code I use:
First, you create a recordset (here: "rsc") which gives you the list of ID fields you want to export, then you create CrystalRuntime.Application object, then you loop through the recordset, open your report (here: "oRpt") and set login info. Then set the selectionformula, so that the report displays only the data of the current ID, e.g.:
oRpt.RecordSelectionFormula = "(" & oRpt.RecordSelectionFormula & ") AND {myTab.myVal}=" & rsc("myVal")
Then you export the report, move to the next record in recordset, and repeat the loop until recordset.EOF. Then you close recordset and connection.
Micha

Can I broadcast multiple video chats using Adobe flash player and "RED5 flash server"?

Hello...
I've just joined today, and I had a question about RED5 & Adobe... Does anyone know if it is possible to broadcast multiple video chats using Adobe flash player from "RED5 flash server"?
Thanks,
P.delafortune

I am not sure whether any one of us has experience with RED 5 server - it would be best if you can post of RED 5 forums and try to get solution to your query. If you have any related query with respect to FMS - please feel free to post again.

Can multiple TV be used?

Similar Messages

Maybe you are looking for