Can MultiProviders , Remote Cubes Support Datamarts Concept?

Hi..
Can some body tell me if we can generate export datasource on a Multi Provider? also, can we include one multiprovider or remote cube in another multiprovider as one of the objects?
thanks..
kishore

Kishore,
No we cant create DataMarts on Multiproviders and Remote cubes, because these are the pipeline, they will have only the structure not the data.
Question 2.
can we include one multiprovider or remote cube in another multiprovider as one of the objects?
No, you will not get any option,because same what I mentioned above.
Thanks
Ramu
Message was edited by: Pidugu Ramu

Similar Messages

Remote Cube on top of Multicube - possible?

Hello
Scenario 1:
Quick question: I have two BW systems (System "A" and System "B").
In BW System "A" I have Multicubes. In System "B" I have basic Cubes.
Is it possible to link MultiCubes from System "A" with basic Cubes from System "B"?
Scenario 2:
Is it possible to select in a RemoteCube (Connected with two BW systems) in which Cube the BW should select data (I know that in a MultiCube I can restrict to an InfoProvider).
Thanks for feedback.
Cheers!

You can create Multi Provider only on the objects:
Base Cube,ODS,InfoSet, Remote-Cubes and InfoObjects. NOT on Multi Providers.
You can create Remote Cube on BW "A" based on Data Source of a Base-Cube in BW System "B". You can use this Remote cube to create Multi Provider.
Pankaj

Can you Broadcast from a remote cube?

Can you Broadcast from a remote cube?

No idea what this means... is this question related to NetWeaver BI/BW ? In that case, your post is in the wrong forum... this forum is about the SAP BusinessObjects Information Management products (Data Services, Data Integrator, Data Quality, Metadata Management, Data Federator, Text Analysis, ...)

Can we use remote cubes for real time data

Hi Gurus,
Can you please explain, can remote cubes be used for sales item and billing item ,data sources, if it, can i extract the data as of normal cube running on these DataSource, if so then i want to make multicube on normal cube and remote cube and make a real time sales data on BW, please explain the possibilities of this, we are on version 3.1c
Thanks in advance

Hi,
Remote cubes are special InfoCubes. A Remote cube represents a logical view.
Unlike with BasisCubes however, no data is physically stored in SAP BW. The
data is taken from the source systems only after a query has been executed.
There are three types of remote cube. They can be distinguished by the way
in which they retrieve data.
Overview: Virtual Cube Types
-SAP RemoteCube
A SAP RemoteCube allows you to define queries with direct access to transaction data in other SAP systems.
-General RemoteCube:
A general Remote Cube allows reporting using data from non-SAP systems. The external system transfers the requested data to the OLAP processor via the BAPI.
-Virtual InfoCube with Services:
For a virtual InfoCube with services, a user-defined function module is used as the data source.
Regards
Pavan Prakhya

Remote cube on Data Source 0FI_GL_4

HI,
I have a requirement of reconciling the Line Items from R/3 to BW.
So i tried to create Remote cube with Direct access, but coudnt due to 0FI_GL_4 data source doesnt support Direct access and reconciliation.
I can see that Data Source 0FI_GL_4 is being fetched by Function module BWFID_GET_FIGL_ITEM and the base table is DTFIGL_4.
My question is can I create the Generic data source based on the function module by taking the copy of existing FM BWFID_GET_FIGL_ITEM and change Direct access option to 2(Supports Preaggregation).
Do i need to change any settings at table level and parameters to get the required solution.
Please sugget me how to proceed the development to reconcile the Line Items from R3 to BW.
Regards,
Siva..
Edited by: Siv Kishore on Apr 7, 2011 4:59 PM

HI Banerjee,
Thanks for the update.
As you said i cant use the data source 0FI_GL_1, Because we need to reconcile many fields from R/3 to BW, but those fields are not available in this data source and it will be complicated to enhance such fields.
can I create View based generic data source on BSEK and BSEG tables, Will it work? if yes do i need to follow any criteria to get the Correct Line Items.
Please suggest me is there any SAP suggested solution or if you worked on such kind of development.
Regards,
Siva Thottempudi..
Edited by: Siv Kishore on Apr 12, 2011 4:06 PM

Report is not getting data from Remote cube thru Multi Provider

Hi SAPians
I ve strucked up with a Problem in The Reconciliation Report in BW3.5
The Report was built on a Multi Provider, which was created on Basic and Remote Cubes .
Both cubes have same Data Source and all the Objects were in Active version and found good.
When I m executing the Report ,I m only getting the data from the Basic cube and no data is coming from Remote Cube.
I ve checked the char " 0Infoprov " in Multi Provider and It was assigned with the both the cubes.
What might be the problem
Please help me in this regard
Thanks in advance
Regards
Arjun

Hi
In the Reconciliation multiprovider, include 0INFOPROVIDER = Remote cube.
If data still not coming, you can be sure connectivity with Source system of the Remote cube is the issue
Check with basis to solve the connectivity issue.
Ensure Remote cube is consistent
Bye

Effects of R3 DS enhancement on remote cube

Hi All,
Is there a direct effect while running queries against a remote cube when its underlying R3 DS has been enhanced?
An example is, I'm running queries on a remote cube copied from OL_PCA_1. Now I enhanced R3 DS 0EC_PCA_1_9 (which feeds IS 0EC_PCA_1, which in turn in the basis of my remote cube). I did not include the new characteristics in the remote cube itself, but rather included it in the enhanced standard OL_PCA_1 where more granular reporting will be performed.
Will there be query performance effects on the remote cube using this approach? How can I measure the performance impact (if any) on the remote cube's queries?
Thanks.

Hi All,
Is there a direct effect while running queries against a remote cube when its underlying R3 DS has been enhanced?
An example is, I'm running queries on a remote cube copied from OL_PCA_1. Now I enhanced R3 DS 0EC_PCA_1_9 (which feeds IS 0EC_PCA_1, which in turn in the basis of my remote cube). I did not include the new characteristics in the remote cube itself, but rather included it in the enhanced standard OL_PCA_1 where more granular reporting will be performed.
Will there be query performance effects on the remote cube using this approach? How can I measure the performance impact (if any) on the remote cube's queries?
Thanks.

Adding new field to Remote Cube

Hello,
We have an existing remote cube that we are trying to add a new field to in 7.0. I've already added the field to the datasource, unhidden it, and tested it in RSA3. Now i'm trying to bring it into BW and add it to the remote cube. I right clicked on the source system under the data target and chose Replicate Metadata however the new field does not show up anywhere. What am i doing wrong? Does a remote cube work differently? How do i get my new field over from R3?
Regards,
TMS

That's the problem. The R3 field does not show up in the datasource in BW so it can be moved over to the transfer structure. As you know when you replicate metadata, the new datasource fields appear and can be mapped into the transfer structure. That is not the case for this remote cube. The new field is not there.

Deleting DTP based on Open Hub and Remote Cube

Hi All,
i have created a DTP delta for my Open Hub to load a flat file from a remote cube.
i have done some load test request but it doesn't work (no data in my file .csv), i have created another full DTP with others parameters and it works successfully.
now i want to delete my Delta DTP but the system return me a message like this:
DTP_4IDT4BXV29E1N0MWINKCWO60B cannot be deleted at the moment (see long text)
and in the long text i have:
Message no. RSBK037
Diagnosis
You want to delete a delta DTP that has been successfully used to load requests from the source into the target. If you delete the DTP, you will also delete the information on the source data that was successfully transferred. As a result the source data would be transferred again, if you create a new delta DTP that links the same source with the same target.
System Response
The system terminated the delete operation.
Procedure
You have two options:
1. Delete all the requests loaded with this DTP from the target and then delete the DTP.
2. Do not delete the DTP and continue to load deltas using this DTP.
i tried to see the requests loaded with the delta dtp and i have deleted one but there are another requests that i can't deleted.
i have deleted the delta dtp from my transport request.
how should i do to delete definitivily my delta dtp?
thanks for your help
Bilal

Do not delete entries out of table RSBKREQUEST.
To delete your DTP, you may use program RSBKDTPDELETE. Give the technical id of the DTP as the input parameter.

Problem with a query on Remote Cube

Hi,
We are working on Remote cube, which has a source from a view built on R/3 base table. I need to extract the data to BW based on a current date due to huge volume of data(performance reasons) in the table. I have used an exit on R/3 to restrict to current date but the extract checker was showing the valid data ie only for current date when i had built a query on Remote cube, the Report was showing complete data(restriction not working). We have even tried using an inversion routine in transfer rules to pass the selections to the Source system even then it doesn't work. Could you help if you have come across same kind of situation or you can suggest an alternate solution on the same but we have to use Remote cube.
Any suggestions asap would be highly appreciated and rewarded with full points.
Regards,
Raj

Could you check the BLOB really contains UTF-8 encoded XML?
What's your database character set?The BLOB contains UTF-8 Encoded
and the database where i am connectes have AL32UTF8 character set, but my internal instance have "AMERICAN_AMERICA.WE8ISO8859P1"
that is a problem?
How could I change the character set of the oracle local client to the character set of the remote oracle data base?

Help required for a Remote cube query

Hi,
We are working on Remote cube, which has a source from a view built on R/3 base table. I need to extract the data to BW based on a current date due to huge volume of data(performance reasons) in the table. I have used an exit on R/3 to restrict to current date but the extract checker was showing the valid data ie only for current date. When i had built a query on Remote cube, the Report was showing complete data(restriction not working). We have even tried using an inversion routine in transfer rules to pass the selections to the Source system even then it doesn't work. Could you help if you have come across same kind of situation or you can suggest an alternate solution on the same but we have to use Remote cube.
Any suggestions asap would be highly appreciated and rewarded with full points.
Regards,
Raj

I can think of two ways to do it
Simple with no ABAP coding is a view
Create a view between a timestamp table and your big table
Put an entry into your timestamp table of the current date - then use a selection of this inside the view
Unforutunately you cannot use SY fields inside database views (otherwise you could have used these as a selection condition in the view)
The best way to do it is using a function module and passing the data from the query into the SQL statement
I prefer to do it the last way and also pass data through a generic structure - thus you manipulate the data inside the intial loop in the function module and don;t utilise further loops downstream in transfer rules
(to try and keep the reponse time down)

Remote Cube Performance

Hello BW Experts,
1) Is it advisibe to use remote cubes ( not for the user purpose, but for internal data reconciliation purpose). ?
2) tables we are looking at are the vbak, vbap, vbrk, vbrp from SAP and comparing them to the base Sales and billing ODS. And produce a reconciliaiton report. Since the data in the source tables vbap, vbrp is huge, it gives memory dumps. Is there any better way of using this. Any suggestion to get solve the memory dump?
3) Are there any measures to improe remote cube performance
4) Other than the remote cube is there any other way of doing the reconciliation for the above data
Any suggestions appreciated.
Thanks,
BWer

Hi BWer,
Remote cube performance is really an issue.
Instead, you can load data upto PSA and compare them.
There is a "How to... Validate InfoCube Data By Comparing it with PSA Data":
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how to validate infocube data by comparing it with psa data
You can also quickly build in R/3 a query upon those tables using SQ01 tcode and Quick Viewer button for comparison.
Best regards,
Eugene

I don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp.

i don't have a wireless keyboard or mouse for my 2007 iMac, is there any way that can use remote desktop and access it from my 2010mbp

Hi champrider,
You can use an application such as Apple Remote Desktop to control your iMac remotely. See this article -
OS X Mavericks: Allow access using Apple Remote Desktop
This help page will provide you with some other useful resources for Apple Remote Desktop -
Remote Desktop Help
Thanks for using Apple Support Communities.
Best,
Brett L

Error while assigning source system to SAP Remote cube

I need to do a query using remote cube and the source sys is flat file.
it wont let me assign the source system to the remote cube.
the r/3 system icon is seen next to the remote cube technical name...
I can't see my flatfile source system
can somebody help me.

Hello Kiran,
I don't think its possible to use Remote cubes for PC_FILE or FLAT FILE as Source system.
You can use Virtual Providers in these different scenarios
Virtual Providers based on DTP => used for SAP source systems
Virtual Providers based on BAPI => used for non-SAP or external systems
Virtual Providers bsaed on Function modules => You use this VirtualProvider if you want to display data from non-BI data sources in BI without having to copy the dataset into the BI structures. The data can be local or remote. You can also use your own calculations to change the data before it is passed to the OLAP processor. This function is used primarily in the SAP Strategic Enterprise Management (SEM) application.
Use InfoObects as Virtual Providers
Your case is none of these.
More details can be found under this link:
http://help.sap.com/saphelp_nw70/helpdata/EN/84/497e4ec079584ca36b8edba0ea9495/frameset.htm

Variable on Remote Cube

Hi,
I am trying to generate a report on BW using Remote Cubes have source as SQL server using UD Connect. I am using this process to re-consile some of the values. I am getting a date from source and I want it to display as Fiscal Period.
Creating variable is not of much use because the code will execute at the first point and is passes as selection criteria to UD Connect , This may impact the performance. I want the variable/formula to execute after the data comes to BEx.
I tried of creating the Text variable with replacement variable on Characterstic (Date) so that I can pick on mmyyyy. The text variable is not working.
Can any one suggest me on this.
Regards
Sudheer

hi
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f05d0b81-076a-2c10-44ab-f00b0b90ce38?QuickLink=index&overridelayout=true
this may help you

Can MultiProviders , Remote Cubes Support Datamarts Concept?

Similar Messages

Maybe you are looking for