Can my 2001 G4 Powerbook have wireless internet?

Hi,
I purchased a G4 Powerbook around Spring of 2001. I am not sure if it is Airport ready. I misplaced all the manuals for it. If I wanted wireless internet (to be used at school, hotspots, etc.), do I just buy an Airport card and pop it inside (I noticed Airport cards are on sale at Fry's for $49)? Are there any other procedures? Thanks.

Hi,
Your PowerBook uses the original (802.11b) AirPort card, not the AirPort Extreme card (802.11b/g). The original card is no longer made but can be found on eBay and some retailers such as L.A. Computer Co. but the price is almost double an AirPort Extreme card. Once you have the card it's plug and play.
John

Similar Messages

  • PLEASE HELP ME GET THE SOFTWARE TO INSTALL ON MY COMPUTER SO I CAN HAVE WIRELESS INTERNET

    Okay i know this is off the tangent but i am losing my mind i have a wireless B broadband router model number befw11s4 and i lost the cd upon a long tideous move so can you please anyone PLEASE HELP ME GET THE SOFTWARE TO INSTALL ON MY COMPUTER SO I CAN HAVE WIRELESS INTERNET i am losing my mind i callled linksys and they were no help telling me i had two option to either buy a 29.99 plan or a 39.99 plan and i couldnt get  the help i needed unless i bought the **bleep** plans so i said kindly thank you for your time ...I figured i would post a thread up asking if someone anyone can please help me get this software or cd so i can install it on my computer !! THANK YOU FOR YOUR TIME !!!!!
    Message Edited by kent07 on 11-20-2009 05:46 PM

    You don't need any software to run the router at all.  Connect with your wired computer to 192.168.1.1 username blank, password admin and configure your router manually like everyone else. 

  • Hi there!  We just got an ipod touch 8G.  We have wireless internet, but can't join the network with the ipod touch!  Very frustrating and we have tried all of the troubleshooting suggestions on the support site.  Help!  The router is a linksys WRT120N.

    Hi everyone!  WE just got an ipod touch 8G.  We do have wireless internet, but can't join the network with the ipod touch.  Message comes up.."unable to join the network".....very frustrating!  We have tried all trouble-shooting suggestions on the site, but nothing is working.  Anyone out there got any ideas for us??  The router is a Linksys WRT120N.
    Thanks for any help any one can give!!!

    Does the iPod connect to other neworks?
    Do other devices connect to the network?
    What encryption are you using?
    How you tried changing the type of encruption? Changing to no encryption?

  • I have an iMac 10.8.3 and want to get wireless speakers to put upstairs so I can listen to sky.fm. What do I need to get? I do not have wireless internet

    i have an iMac 10.8.3 and want to get wireless speakers to put upstairs so I can listen to sky.fm. What do I need to get? I do not have wireless internet. Thanks

    I would think Airport Express would do the job (this is UK store site but it should be available wherever you are):
    http://store.apple.com/uk/product/MC414B/A/airport-express
    It has an audio output socket and air play will stream music from your mac to the device wirelessly.  If you want to listen to the radio will need to do so via iTunes or use a program such as Airfoil (free):
    http://www.rogueamoeba.com/airfoil/mac/

  • Hi everyone!  I turned on my computer the other day and the icon for Safari was missing from my dock.  I looked in the applications folder and it is no longer there.  Does anyone know how I can get safari if I have no internet search engine?

    Hi everyone!  I turned on my computer the other day and the icon for Safari was missing from my dock.  I looked in the applications folder and it is no longer there.  Does anyone know how I can get safari if I have no internet search engine?  I

    Safari 5.0.6 for Leopard can be downloaded from here:
    http://support.apple.com/kb/DL1422
    Does anyone know how I can get safari if I have no internet search engine?
    How did you post here?

  • Message says must connect to the internet to move movies from computer to iphone.  I have wireless internet.  Isn't that "connected to the internet?"

    message says must connect to the internet to move movies from computer to iphone.  I have wireless internet.  Isn't that "connected to the internet?"

    Hi,
    Please install chipset driver including USB:
        http://support.amd.com/en-us/download/chipset?os=W​indows%207
    Wireless driver:
        http://ftp.hp.com/pub/softpaq/sp56501-57000/sp5661​7.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT1695 i just got an ipad 2, 32gb, i have  wireless internet thru my phone carrier for my computer, they say i can use up to 5 devices with it, but i cant get the ipad to connect to it, i have tried everything, i think, can u help me figure this out

    i just recieved an ipad2, 32gb, i cant figure out how to get it to connect to my wireless internet.. it is thru my cell carrier, i am suppose to be able to use up to 5 devices with it at the same time.. can someone tell me what i am missing.

    You can not install it.
    Only apps from the official Apple App Store can be installed.

  • How can I use my Iphone as wireless internet receiver for my MacBook Pro?

    Can anyone tell me how to use my Iphone 4 a wireless internet receiver for my macbook pro? Thanks & greeting from the Netherlands! Matthijs

    Apple!!!! Please listen to your customers!!!!
    http://finance.yahoo.com/news/Smartphone-Fans-Want-FM-iw-1184795842.html?x=0&.v= 1
    Give us or make us pay for FM app already!!!!!
    http://www.tomsguide.com/us/Apple-iPhone-iPod-FM-Receiver,news-4855.html

  • Does the G5 have wireless internet capabilities in it already?

    Hi everyone. I have a G5 that I purchased in 2005. I was wondering if it already has a built in airport or maybe how I could find out. If it doesn't, then what is the process for hooking it up to wireless interent through comcast.
    Thanks for your help!!!

    Hello and Welcome to Apple Discussions. 
    Models sold after May 2005 should have Wireless (called Airport Extreme) built in. If the iMac was purchased before this then the card can be fitted later:
    http://manuals.info.apple.com/en/imacG517inchairport.pdf
    http://www.amazon.com/Apple-M8881LL-AirPort-Extreme-Card/dp/B0000899ZB
    If you're not sure when you got the iMac check in Apple Menu > About this Mac > More Info > Network > Airport. If it is installed go to Apple Menu > System Preferences... > Network > Airport then switch Airport on and select the network name of your Comcast router.
    regards
    mrtotes
    Message was edited by: mrtotes

  • ITunes can't see my NAS on wireless internet

    So I've got this new laptop with a small SSD and I need to put my music on my NAS - I've made it work superb when the Ethernet is in, but as soon as i log onto the wireless Internet the NAS drive disappears. When I plug it back in, it automatically appears.
    I know for a fact that our wireless Internet router is fast enough so it shouldn't be a problem, at all.
    Any solution to this yet? I've been googling for about two hours and I haven't been able to find any topics about this.
    Regards
    Daniel

    I don't know if this will help, but I'd suggest you update to iTunes 6.0.5. That will run on 10.2.8 and is much more current and complete. You'd also want QuickTime 6.5.2. Worth considering, anyway.
    Another thing to try would be to delete the iTunes library and library.xml files in your user -> Music -. iTunes folder to make sure you start clean and then try the Add To Library command again. You might want to use Disk Utility to verify the external drive, just to make sure that there aren't any drive errors (doubtful since you say that the tracks will play through Finder, but worth checking).
    Hope this helps.

  • I have wireless internet...but can't tap into host computer to print

    my macbook is brand new with leopard and my pc (host) has vista. My macbook recognizes the network and i have internet access, but i can't see the pc from the macbook. i would like to be able to print through the pc. What am i doing wrong?

    How to enable your computer software firewall to "trust" the other computers on your network ---  this depends on which firewall you are using.   Check the "Help" in your computer software firewall.   In most firewalls there should be a "Network" or "Trust" tab or option.  Look in there.  To setup trust, most firewalls will need either (1) the "MAC address" of the computer (or router) that you want to trust, or (2) the LAN IP address of the computer or router, or (3) a range of LAN IP addresses to trust.
    For option (1), you will need the MAC address of all computers on your network.
    Option (2) usually works best if you need to specify your router ( at 192.168.1.1 ).  Note that the LAN address of computers can change.
    Option (3) works well if it available because you can specify 192.168.1.0  thru  192.168.1.255 as the range to trust. 
    When you specify the computers and router to trust, specify each device just one way.  That is, do not list the LAN address and the MAC address of the same device, use one way or the other, but not both.
    If you need more help, please specify your computer software firewall. 
    Message Edited by toomanydonuts on 10-19-2009 03:00 AM

  • Can't connect new MacBook to wireless internet

    Just bought a MacBook, but I can't get it to connect to the internet over my wireless network. It picks up the signal, I typed in the password, and Internet Connect says that I am connected. But when I open Safari it just tells me I am not connected. Then it tells me to run Network diagnostics (ISP, INternet, and Server all say 'failed'), then Network Setup assistant. I follow those steps and inevitably it tells me "unable to establish a network connection).
    My router is a 2Wire that came with my DSL subscription. I have never had an issue connecting a PC using the WEP password but I'm clueless on the Mac.
    Any suggestions? Thanks, Steve

    I have been having a slightly different problems with my MB and the built-in wireless. On my home network I have had 4 different Windows laptops connected over the last few years and each and every time they find the network and connect no problem. With the MB it connected first time via WPA and all was well. However after about 2 weeks for no apparent reason it dropped the connection and no matter what I did it would not find the wireless network again.
    Took it to work the next day and via the 802.1X network there it connected automatically as soon as I started it (previously set-up of course). Got home that night and when I started it the WPA connection worked again.
    This has now happened 3 times with it working without a problem for 2-3 weeks and then just losing the connection. Generally if I switch it off and wait until the next day it all works again but as I am going to be travelling soon I need a reliable machine that connects each and every time. Guess it will be a Windows laptop then as I'm totally lost as to what to do with the MB.

  • Can't connect to Powerbook via wireless network......

    I have an iMac and a Powerbook and a wireless router. From the Powerbook, I can connect to the iMac's hard drive wirelessly by going to the network pane then clicking on Jason's iMac G5, entering the password, etc. But, I can't do the oppostite. I would like to access the Powerbook's hard drive from the iMac but everytine I try to do so I get an error message that says "Connection's Failed: The server may not exist or it is not operational at this time. Check the server name or IP address and try again." And yes, in Sys Prefs, I have Personal File Sharing turned on on both computers BUT, everytime time I try to connect to the PB via the iMac, file sharing turns back off on the PB and I have to turn it back on....... any help would be appreciated. Thanks, Jason
    Powerbook G4, iMac G5   Mac OS X (10.4.4)  
    Powerbook G4, iMac G5   Mac OS X (10.4.4)  

    I opened console.app and this is what it said:
    Mac OS X Version 10.4.4 (Build 8G32)
    2006-01-16 01:42:08 -0500
    2006-01-16 01:42:10.906 SystemUIServer[78] lang is:en
    Jan 16 01:43:54 jasons-powerbook-g4-15 crashdump[201]: AppleFileServer crashed
    Jan 16 01:43:55 jasons-powerbook-g4-15 crashdump[201]: crash report written to: /Library/Logs/CrashReporter/AppleFileServer.crash.log
    any suggestions?
    thanks, jason

  • Can't connect to Ethernet or Wireless internet with my MacBook

    Hello.
    I got a problem with my new MacBook. Every time im connecting it to the internet, the status of the internet connection turns yellow. This happens both with Wireless and Ethernet connections. Sometimes its working for like 10 minutes, and then it doesnt. After it's off the internet once again. All the other computers can't connect. Its like it can't get its own IP-adress. It steals the Windows Ip-adresses and then they cant connect to the internet.
    Anyone able to assist me? Or should i call Apple?
    Sorry for my bad english, im not pro at it yet.
    Regards,
    Martin from Denmark.

    Are you using a router? If not then only one computer can be connected at a time.
    If you are using a router, have you added your computers MAC address to the routers Access Control List?
    Does your router have a setting where you can limit how many computers can be connected at one time?
    Are you using an Apple Airport Base Station as your router or some third party router? If it is third party you would need to ask the router manufacturer how to add the macbook to your current network.

  • Is this the product I need to have wireless internet access??

    My question is quite simple, but I've never owned a laptop before so this is new to me!
    I have a MacBook and we have internet, but we'd like to be able to connect wirelessly so we don't have to sit at the desk all the time. (We have a Motorola SURFboard Cable Modem.) What product do I need to buy to do this?
    Thanks so much!!!
    Jessica

    Jessica,
    The cheapest way in is to buy the Airport Express.
    All the base stations do the same basic wireless networking and then expand from there.
    1. Airport Express plus Airtunes = $99
    2. Airport Extreme = $179
    3. Time Capsule plus internal Hard Disk = $299 or $499
       Joseph Kriz

Maybe you are looking for

  • Failed to create MySQL tables. Installation aborted. BOE XI 3.1 Linux

    Tried to do a full install of BOE XI 3.1 Linux on Redhat 5 with at least the mimimum requirements and it goes through fine but then in the end errors out with "Failed to create MySQL tables. Installation aborted." Any ideas on what is causing this an

  • .bat error - "Line too Long"

    Hi , Im need to run my server from a bath file on win NT M/c . My property list and the classpath is really huge , possibly more than 4000 chars . set %JAVA_PROP% =-D Really long set of props set %MY_CLASSPATH% = really long list of jars too! java %J

  • My iMessage on my iPod won't accept my email

    When I try to set up my iMessage, I enter my apple id, then I verify my email that I want to use as a  contact number, but after almost three minutes of waiting, it says that it can't verify my email and says check mail to verify account. I Check my

  • SAP Note 0001590226 mopz

    hi when i execute and reach the step 'download files' it shows me following message, i should just apply this note in snote in solman? it will impact anything? because currently mopz work fine to confirm download basket It is required to implement SA

  • Problem for running Update query with Chinese

    Hi all, I am running a web application in Lotus Domino. I have a Lotus Script Agent which need to update Oracle 8i Database with Chinese Character throught ODBC but i find that all characters become some strange characters. I got the problem only for