Can my AE handle this?!

My ISP have recently starting offering a broadband service of 25000 Kbit/s down and 2500 Kbit/s up.
In theory this sounds great, but I have also been reading of problems that some customers have had with their routers - it seems that some routers simply cannot handle this speed, and don't deliver anywhere near this speed to devices on the wireless network.
Does anyone know if the latest Airport Extreme can handle this speed, or will it max out somewhere below this? I know that all these speeds are "best efforts" from the ISP, but the point is can the router cope with anything close to that?
I'm currently running 10000 Kbit/s down and 1000 Kbits/up with no problems.
Thanks

25000 Kbits/s == 25 Mbps
2500 Kbits/s == 2.5 Mbps
Every AirPort Extreme base station (AEBS) is faster than that. You shouldn't have any problem.

Similar Messages

Can my lap handle this project?

Hi
I am very new to FCP. I hope someone can answer this question or point me in the right direction:
I just installed FCP 6 onto my PowerBook G4 17". I am shooting videos and plan to use this lap to edit in FCP. I am worried about whether this lap can handle it. I will hold footage on external harddrive. I will produce over 100 - 1 minute golf video clips and I am shooting in HDV
CPU Type: PowerPC G4 (1.1)
Number Of CPUs: 1
CPU Speed: 1.5 GHz
L2 Cache (per CPU): 512 KB
Memory: 1.5 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.8.6f0
ATI Mobility Radeon 9700
thanks!

Christina:
I'm a four handicap.
So, I am qualified to discuss golf.
One hundred one minute videos will work well, bit I strongly urge a Cardbus FW card if you are capturing using a HDV cam.
Attach the cam to the Cardbus FW card, and solid 7200 rpm FW drive to the laptop.
good luck.

Can a PowerBook G4 handle this game?

These are the system requirements of a game I want to get. But can my computer handle this game? I have a standard PowerBook G4 12" running Tiger.
Operating System: Mac OS X 10.3.9 or later
CPU Processor: PowerPC G5 or Intel chipset
CPU Speed: 1.8 GHz or faster
Memory: 512 MB or higher
Hard Disk Space: 3.5 GB free disk space
Video Card (NVidia): GeForce FX 5200 or better
Video Memory (VRam): 64 MB or higher
Recommended System Requirements:
Operating System: Mac OS X 10.4.6 or later
CPU Processor: PowerPC G5 or Intel chipset
CPU Speed: 2.0 GHz or faster
Video RAM: 128 MB
Do you think the standard PowerBook G4 12" could handle this game? The only things my computer doesn't meet are the CPU speed and the CPU chip set (I'm a G4 at 1.5 GHz). Thanks.
PowerBook G4 12.1 1.5 GHz 512 MB RAM Mac OS X (10.4.6)

Hi College Caleb,
I think the game will run on your system, although it might be slow sometimes:
http://forums.civfanatics.com/archive/index.php/t-176229.html
There's a patch out now from the makers of the game that apparently fixed the sound issues on all systems. Furthermore, even people running Civ IV on dual 2.5 GHz G5s have been experiencing performance issues. Probably they will come up with another patch to make it run more smoothly on all systems. I think I'll give it a try on my PB G4 soon.
Good luck.

Can my system handle DVCProHD

I am quoting on an new project, it might be shot on DVCProHD and they would like to finish in HD, the end result being a Blueray disc. I am hoping to use DVCProHD codec throughout the process.
My main question is: Can my system handle this format?
CPU: Dual 1.8 GHz PowerPC G5
2 GB RDDR SDRAM
Media Drives: SATA RAID (drives striped in pairs)
I/O: AJA KONA LS
I am hoping I don't need to upgrade to do this job, but I have not used DVCProHD with out down converting to SD. I have been using uncompressed SD 10 bit with out any problem.

EVERYTHING is fine, but the I/O LS. That is a standard def card. If you want to view HD externally then you need an HD card and HD monitor.
But the system specs are fine for DVCPRO HD. The requirements for that format aren't too bad.
Shane

How can I get FireFox 4 to be able to handle a number of videos open in a number of tabs. FireFox 3.6 could handle this but Fire Fox 4 , no chance. Please advise. Kind Regards.

On Windows XP.
I watch videos on CNBC and on FireFox 3.6 I use to right click and open up videos in new tabs and there was no problem, they also only started when I clicked on the tab to view the video which was good because it meant I did not have to go through and pause them. But FFox 4 can not handle multi vids in multi tabs, or at least mine can not . Please advise what I can do to fix this. Kind Regards.
It was a job to get the trouble shoot info as FFox all woking very slow and jumpy.

Firefox tarballs from Mozilla Org use prefs within Firefox for updates. The "toggle" for not automatically updating - '''app.update.enabled''' and where to look for updates - '''app.update.url'''. The first needs to be '''''false''''' and the second could be a '''''null''''' string, do an update can't be found.
''I use both prefs to keep Firefox from updating by itself. I install each new version of Firefox as it is released, and keep the older versions around for reference purposes. Those prefs are the same since Firefox 1.5 came out.''
The versions of Firefox that are part of an operating system installation usually are that OS's own build of Firefox, and don't use the same update setup as Mozilla uses, in most cases. I am not familiar with Cent OS, but Ubuntu and Debian look for Firefox updates and from their own program repository servers outside of Firefox - as with the tarballs from Mozilla.

Have started to get info window from iTune telling "This computer is already associated with an Apple ID. "You can download past purchases on this computer with just one Apple ID every 90 days......" How to handle this situation

"You can download past purchases on this computer with just one Apple ID every 90 days. This computer can be used with a different Apple ID in 63 days." How to handle this situation

https://discussions.apple.com/message/16567363#16567363
From the More Like This section on the right

Can After Effects CC handle this many Illustrator layers?

I designed a world map in Adobe Illustrator with many layers for a documentary about interwar Europe (1919-1939). The Illustrator map actually has 80 layers. Would this be a map with too many layers to animate in After Effects?
In AE I plan to add a camera to zoom in on parts of the map like Europe and the Middle East. But I'll also need to animate the opacity of individual layers to show territorial changes and invasions in Europe before and after 1919 Versailles Treaty and the 1938 Munich Agreement. The reason I have so many layers is that I thought I could use this one map in multiple different map animations for my film.
Can AE handle this many layers? Or is it wiser to keep the layers to a minimum number?
Also, is there no way in After Effects to group the layers other than pre-comping them? It would be great to be able to have sub-layers in AE like you can in Illustrator. I could then reduce the number of layers in my map from 80 to less than 20, by grouping all European states as sub-layers into a Europe layer, as so on for Africa, Asia, etc.
Unless I'm mistaken, Illustrator sub-layers are not visible in After Effects, are they?

Rick and Mylenium,
Thank you both for your feedback. Much appreciated. Mylenium, I'm sure you're right. I probably was trying to do too much in one map. I'll follow your suggestion and use the minimum number of layers for each scenario. I'm spending too much time as it is looking for particular layers among the 80.
I do wish it were possible in AE to simply group layers without pre-comping them though. Or that Illustrator sub-layers could be visible. It would really help to streamline the workflow. I suppose I could precomp all layers and then simply add a camera to the pre-comp.
Rick I'll try the expression controls and parenting, but can you elaborate a little further regarding your suggestion of pre-planning in Illustrator?
Thank you both again for your helpful suggestions.

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this?

While installing a program (MediaCenter.exe) to handle audiobooks from the library, I erroneously associated the download site with Windows Media Player instead of the actual application (NetLibrary Media Center). How can I reverse/change this? Reinstalling the application does not clear the error, so I'm assuming the association is somewhere in Firefox.

Never mind -- I just found it under Tools/Options.../Applications, where I changed the incorrect association of "nlmcp" from Windows Media Player to the correct one, NetLibrary Media Center. Done!

I want to rent an unit For Items How Can I Handle This cycle ??

i want to rent an unit For Items How Can I Handle This Cycle ??

If you type :
<p>some text here <img src="some_image.jpg">and more text here</p>
then it will be displayed as in :
some text here
<some_image.jpg>
and more text here
It splits all the sentence !.. no need to give you an URL example... it's logic ! please try...

Can OSX Server, et al, handle this website's load?

I looked through this forum and the one on Xserve and couldn't find a topic like this.
The site is being converted from an obscure programming language to PHP/MySQL. In functionality, it will resemble a Craig's List for college students. Lots of database interaction. Very few graphics except for multiple small banner ad deliveries on each page. Lots of email interaction generated by a form at the site.
We're planning on picking up a new Xserve, dropping a couple of those 15k rpm drives the Apple Store sells into it, and boosting the RAM to 4gb (?).
What I'd like to know is the following:
1. Can someone give any real world numbers on the performance of OSX/Apache 2.2/MySQL and said hardware? Can the database handle 100k, 500k, 1M records? Are there general rules for how many page views per day that can be served? (Bandwidth should not be an issue...I believe we are allocated 1TB per month, and as I indicated, graphic content is low.)
2. If the server and software can handle X, would is the next logical step beyond X? I realize that this may never happen, but I do need to ask the question for my own peace of mind. In other words, how does one expand beyond the fastest hardware and what I perceive to be as the best software solution?
Right now the site is at zero, and everyone dreams of building the next MySpace or YouTube. If it flops or just never generates tons of traffic, I can figure out how to handle that. My concern is if it does go in the other direction, so, any tips/suggestions would certainly be welcomed. Thank you in advance.
Rob

> Can someone give any real world numbers on the performance of OSX/Apache 2.2/MySQL and said hardware
In most cases bandwidth will be your limiting factor more than CPU resource.
1TB might sound like a lot - and it is if you're doing mostly text-based content - but on a typical traffic sine-curve it equates to about 300kbps. Your server is more than capable of handling that without breaking a sweat (database schema notwithstanding).
All my servers are running multi-megabits per second and I still have room to grow.
1 million rows in a MySQL database is not large. I have MySQL databases using hundreds of millions of rows. Beware of your database schema (query optimization and indexes will make a BIG difference to performance).
The next logical step as far as scaling would be multiple front-end web servers talking to the database server. There are numerous solutions for load balancing traffic across multiple servers, depending on $$s and flexibility needs.
The biggest factor is going to be in choosing the language to write the site in. PHP isn't necessarily the best choice. You need to be very careful (and not an 'average' PHP programmer) to be able to eke the best performance out of a busy site (esp. when it comes to database interactions - you need to cache the data in the app rather than hitting the database for every single page hit).
There's nothing wrong with PHP - just be aware of its limitations and be prepared to deal with it (whether through code optimization or another language switch).

What's the best way to handle this?

I'm not sure what APIs/setup to use for this situation:
A company wants to store data projects they do for clients. Each year, the data fields are set (as a result of gov't requirements) and they won't change for any client project for that year. however, the fields required can (and usually do) change every year. So things they require this year, might not be needed the next year and new fields might be introduced.
While there are likely to be many common fields from year to year, there's no way to guarantee which ones will remain consistent. They also want to be able to do searches on the data and fields, for projects within a year and across years.
What's the best framework/API/configuration to handle this? EJB? Simple JDBC? If so, how should the database be handled? Won't it have to constantly create new fields in a table? Or is there another way to handle this?
What's the best way from a "clean architecture" standpoint?

dang, I really have to start over? I finally got all this stuff working again. well, hopefully it won't be as big a pain this time since the data won't be coming from a different machine. After completing the Migration Assistant process, I had to reinput a bunch of serial numbers for apps, reinstall print and mouse drivers, etc... I've finally got the new machine up and running smoothly and now I gotta start over? Sigh.
I was hoping that either I could rename the current account after deleting the other one, or just move everything from one account to the other and then delete the 'RJM' account.
ok, so it sounds like here are the steps I need to take:
- make another full cloned backup of this current machine in Super Duper
- reboot this machine using the advice in the first post, wipe everything clean and reinstall the OS
- create a new account like 'user1' and re-do software update (which is like 2.5 gig worth of stuff) and takes like an hour even on a high speed connection
- then re-do the migration assistant process to the properly named account
- then delete the 'user1' account
does that sound right?

HT1365 Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

Hi can anyone help with this issue regarding my wireless magic mouse? When im on google chrome and scrolling down the page i always have youtube running in the background but the audio cuts/spits/pops can anyone help me with this?

The figures you mention only make sense on your intranet. Are you still using the same wireless router. The verizon one is somewhat limited as far as max wireless-n performace. For one thing it only has a 2.4 radio. I like many people who wanted wireless-n performance before they even added a wireless-n gigabit router, have my own handling my wireless-n network.

How to handle this scenario in selection screen?

hi friends...i have 2 radio-buttons (2 parameter fields below each) in one group..the need when one radio button is checked, i need two parameter fields below it to be input enabled and the other to be disabled, if another radio button is checked, then the former two will be disabled and the other two parameter fields to be input enabled..no problems with this..i have written this functionality in at selection-screen output..i want to make each 1 parameter in the two groups to be mandatory..as using obligatory gives problems during at selection-screen output event, i want to achieve this functionality in some other event...i have tried the same in At selection screen on para_1 and at selection screen on para_2 fields, but am not able to achieve the desired functionality..by default the first radio button is checked, if the user wants to click the second radio button, At selection screen on para_1 event gets triggered and it throws the error msg. for the first one & vice versa...can't handle this in start-of-selection event also, as it gives the error msg. in a blank new screen..how to achieve it??
i have checked quite a few SDN threads, but doesn't answer my question
regards,
Sathish R

Hi,
I think you cannot proceed with obligatory statement as it will be triggered before theselection screen events.
You may check the code below.
PARAMETERS: r1 RADIOBUTTON GROUP rad1 USER-COMMAND abc.
PARAMETERS p1(5).    ( maintained as obligatory)
PARAMETERS p2(5).
PARAMETERS r2 RADIOBUTTON GROUP rad1.
PARAMETERS p3(5).       ( maintained as obligatory)
PARAMETERS p4(5).
INITIALIZATION.
r1 = 'X'.
AT SELECTION-SCREEN OUTPUT.
IF r1 = 'X'.
    LOOP AT SCREEN.
      IF screen-name = 'P4'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ELSEIF r2 = 'X'.
    LOOP AT SCREEN.
      IF screen-name = 'P2'.
        screen-active = 0.
        MODIFY SCREEN.
      ENDIF.
    ENDLOOP.
ENDIF.
AT SELECTION-SCREEN .
IF p1 IS INITIAL AND sy-ucomm NE 'ABC'.
    MESSAGE 'Enter the obligatory value' TYPE 'S' DISPLAY LIKE 'E'.
ENDIF.
IF p3 IS INITIAL AND sy-ucomm NE 'ABC'.
    MESSAGE 'Enter the obligatory value' TYPE 'S' DISPLAY LIKE 'E'.
ENDIF.
Hope this will help you.
Regards,
Smart Varghese

TS3694 Please how do I handle this. I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an error message that it cannot be downloaded with code1015.

Please how do I handle this?
I downloaded a higher version of my Iphone 3 but during the installation it always hangs and show an unknown error message that it cannot be downloaded and the code of the message 1015.

This is usually a result of the iPhone being hacked with the cutsie term for that "jailbroken".
http://support.apple.com/kb/TS3694#error1015
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Can I get handle to Database Row before an entity is deleted

Hi,
We are using stored procedure to list, insert , update and delete entity objects.To use the stored procedure I override the default queries generated by Toplink and make use of the stored procedure query.The issue here is that my Stored Procedure requires more arguments (like name of the user doing the insert) than there are fields in the entity.I need to provide these argument values to the call.For this I do something like
session.getDescriptor(MyClass.class).getEventManager().addListener(new DescriptorEventAdapter(){
public void aboutToInsert(DescriptorEvent evt) {
evt.getRow().put("USER",evt.getSession().getProperty("username"));
I set the username in the unitOfWork out of which I can grab the value in the eventHandler and put it inside the row just before insert.I do the same for modify too.But I dont see a similar methods for "delete".Do we have a aboutToDelete() method where I can get a handle to the row.The preDelete() does not provide a handle to the row.How can I insert additional arg values to the delete query?
Thanks,
Harini

Hello Harini,
Wow, you are correct there is no aboutToDelete, I guess manipulating the row before deletetion is not that common for our TopLink clients as this is the first request I have heard for it. I will add this request to our enhancement database. You might want to follow it up with support if it is a priority for you.
As a workaround you could use the preDelete event to change the stored procedure call with the user name argument (i.e. build the procedure call dynamically in preDelete and set it into the query. The query will have been cloned at this point so there should be no concurrency issues. Make sure when doing this that you do not set the deleteQuery in the descriptor query manager as this will override the original query if set.
Example:
descriptor.getEventManager().addListener(new DescriptorEventAdapter() {
public void preDelete(DescriptorEvent event) {
StoredProcedureCall call = new StoredProcedureCall();
call.setProcedureName("Delete_proc");
call.addNamedArgument("P_ID", "ID");
call.addNamedArgumentValue("USER", "scott");
call.addNamedArgumentValue("TIME", new java.util.Date());
event.getQuery().setCall(call);
});

Can my AE handle this?!

Similar Messages

Maybe you are looking for