Can my Combo-drive read Dual-Layer DVDs?

I have a Combo drive in a PBG4 12" 1.33GHz with a combo drive. Can I read DL DVDs burned from one of the new Macs? I couldn't find any litterature on this.
Thank you!
PowerBook G4 12"   Mac OS X (10.4.6)   1.33GHz 768MB RAM Combo-drive

Welcome to Apple Discussions, humain.
I have been burning DL DVDs from another Mac for quite some time now. Never had any problems with the DVDs being unreadable on my PowerBooks except when there was a bad batch of discs, which then meant only the Mac that burned the disc could read it.
15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4,   Mac OS X (10.4.5)   Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Similar Messages

  • Can 2005 iBook G4 1.33Ghz combo drive read dual layer DVDs?

    Hi. Can my 2005 iBook G4 1.33Ghz 1.5G ram OS X 10.4.11 with combo drive read double layer or dual layer DVDs? I couldn't find any definite info anywhere. Thanks a lot!!!
    Mack

    Welcome to Apple Discussions, humain.
    I have been burning DL DVDs from another Mac for quite some time now. Never had any problems with the DVDs being unreadable on my PowerBooks except when there was a bad batch of discs, which then meant only the Mac that burned the disc could read it.
    15" 1.25GHz/12" 1GHz PBs, PPC Mac minis, 12" iBooks G3/G4,   Mac OS X (10.4.5)   Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

  • Combo Drive reading Dual Layer / booting from external DVD USB

    I am helping a friend with an iMac G5. He has the combo drive which is not able to read the dual layer Leopard DVD. I have looked to see if there is a firmware update for the drive however no luck. I am able to put an external usb DVD and it reads the disk however I was not able to boot from the disk using keyboard commands I tried AppleOption+ShiftDelete, C, and also tried Option but no luck.
    I have been reading that booting from usb external drive is a no no on older G5 iMac's unless you are using fire wire. If any one can give me some help with getting the USB drive to boot, or figuring out why the combo drive spits out the DVD every time I would appreciate it. I am also willing to make a bootable usb leopard thumb drive, but I don't want to waste my time if it's not going to boot from USB.
    Thanks,
    jtadmin

    Do you happen to have a more recent Mac that can read the Leopard installation DVD?
    If so, you may be able to start up your Mac in FireWire Target Disk Mode,
    http://support.apple.com/kb/HT1661
    and let the iMac G5 use your Mac's optical drive to boot from the Leopard DVD.
    Also, it is true that PowerPC Macs can generally only boot from external drives that are FireWire.

  • I have a DVD-RAM Drive(ATAPI DVD A DH16AYH) It Can't read dual layer DVD's.

    Hello Sir,
    I have a DVD-RAM Drive(ATAPI DVD A DH16AYH) which can't read dual layer DVD's also has problem in writing DVD's.
    When i burn a single layer DVD at last i.e, at 100% or just before finishing i get error DVD writes Fail "Disc write fails to write Disc-at-Once".
    What Should I do? 

    i have the exact same disc drive,it has Never worked.nobody at hp would talk to me about a warrenty replacement unit.ever

  • Read Dual Layer DVDs in Mac Mini 2005

    My brother has a Mac Mini that he bought in late 2005.
    Can he read dual layer DVDs in this optical drive? More specifically, can he use Handbrake to rip dual layer DVDs on this Mac Mini?

    Might be my ignorance speaking here, but this is the first I've ever heard of a drive that won't read a dual-layer disc. The vast majority of commercial DVD movies are in DVD9 (DL) format, and I'd be beyond surprised if your iBook wasn't able to play any of them...
    I don't have my iBook yet, but I'd guess the combo drive in my Mini is the same, and I've yet to find any DVDs that won't play...

  • Problem with reading Dual Layer DVDs.

    I've a normal iBook G4 with a combo drive (it's the 1 Ghz model) and when I insert a dual layer dvd which I've made on another computer at school, the drive in my iBook won't read it (as in it spits it out). I was wondering if this problem extends to everyone else with a similar model/drive.
    The media I used is a TDK DVD+R dual layer disc. The drive has had a problem reading a dual layered DVD-R; the problem being that it could only read (possibly) only one layer of the disc.
    Is there a firmware update that can applied to rectify the problem?

    Hi and thanks for your reply.
    I'm actually not sure if I can read commerical dual layer DVDs, but the fact that the DVD was pressed and not burnt, and that the DVD is released for commercial purchase has lead me to believe that my drive can read the DVDs.
    Also backing up my drive's ability to read dual layer DVDs, as mentioned in my previous post, is that it could read parts of a DVD-R dual layer DVD. What I meant by parts, or, just one of the two layers, is that the dvd contains a folder which houses 4 gigabytes of data, or about half the DVD. The contents within this folder can be copied to the hard drive, whereas the content on the root of the DVD can not, causing the drive to continually spin the disc, making the "trying really hard to read" noise, forcing me to restart the computer whilst holding the mouse button in order to get the dvd out.

  • Can my Intel iMac read double-layer DVDs?

    What are double-layer DVDs as opposed to regular ones, anyways?
    A friend wants to send me several DVDs worth of files on "double-layer DVDs". Can I read them?
    I have a Intel iMac (dual processor) with a MATSHITA DVD-R UJ-846 CD/DVD Drive.
    I don't want my friend to go through this and then I can't read them. Especially since he makes it out like double-layer DVDs are maybe new or advanced?
    Huh? Anyone?

    Can my Intel iMac read double-layer DVDs?
    Yes.
    What are double-layer DVDs as opposed to regular ones, anyways?
    These DVDs contain a second writable layer, which doubles the DVD's capacity.
    (32795)

  • IBook read dual-layer DVDs?

    Does anyone know if the iBook G4 1ghz or higher can read dual-layer DVDs? Thanks.

    Do you mean home made dual later DVD-Rs or commercially pressed DVD movies that are dual layered? The answer to both should be "yes". However, the software used to burn a home made dual layer DVD-R may or may not be compatible with a Mac...
    -Doug

  • Can iMac read Dual Layer DVD+R???

    If I use Toast to backup my G5 tower data onto a Dual Layer DVD+R disc, will my iMac Flat Panel be able to read it? I've heard that some older drives can't recognize the Dual Layer DVD+Rs.
    Anyone tried a home made dual layer disc on this model iMac yet?

    These are the formats supported in the iMac G4.

  • Can the LightScrib​e 16X max. DVD+/-R/RW SuperMulti drive burn dual-layer dvds?

    It's a LightScribe 16X max. DVD+/-R/RW SuperMulti drive, I think it's part number is 575781-501. It came in my HP Pavilion Elite HPE-380t. I was customizable up to blue ray but I stuck with the standard. Now I'm not sure whether I should invest in Dual Layer DVDs, because I don't know if my drive is capable of writing to them. Does anyone know?

    According to these two sources, yes the drive is capable of writing to dual layer DVDs.
    http://lethbridge.kijiji.ca/c-buy-and-sell-compute​r-accessories-Dual-Layer-DVD-RW-internal-drive-W0Q​...
    https://www.serversupply.com/HP-COMPAQ/MULTIMEDIA/​DVD-RW/SATA-INTERNAL/575781-501.htm
    Hope this helps,
    GeorgeFN
    GeorgeFN
    I work on behalf of HP.

  • Macbook Pro doesn't seem to read Dual Layer DVDs

    I was trying to restore my laptop using the original restore/install dvds that came with it. When I slip the installation discs into the optical drive, my Mac doesn't seem to read them; it just ejects them.
    But I tried inserting audio CDs, data DVDs (4GB max in size) and they seem to work and recognized by my mac. My mac doesn't recognize the installation discs only. I have even went the extra mile of purchasing another Snow Leopard installation disc and the disc, which is sealed, new and fresh from the store also got ejected by the machine. I have read somewhere that the installation discs are Dual Layer DVDs. Seems like my optical drive is not reading dual layers discs anymore.
    Any advice how I can mitigate this? Are there any firmware updates that I can upgrade or downgrade to? How will I know which firmware my optical drive is running on?
    Thanks!

    You can reset the SMC and see if that helps. If it's a unibody or Retina, follow the method for "a battery you should not remove yourself."
    http://support.apple.com/kb/ht3964

  • Can HP 15-d103tx play dual layer dvd or Blueray discs

    I would like to know if my HP 15 d103tx notebook can play dual layer dvd's and blueray discs. 

    Hi:
    Below is the link to the product specs page.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04206739&tmp_task=prodinfoCategory&cc=us&dlc=en...
    All it states is it comes with a SuperMulti DVD burner.
    It will play dual layer disks if you see a small DL on the DVD bezel.
    It will definitely not play blu-ray disks.

  • MB Combo drive reads no original DVDs but burned ones

    hello, i need advice: my macbook 1.83 with combo drive reads only self burned dvds, it rejects all original dvds; no mac os reinstall possible, no movies nothing...
    help....
    what is the problem here ?
    thanks
    michael

    Details of MBP Disc Drive:
    MATSHITA DVD-R UJ-857:
    Firmware Revision: HAEA
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipping Drive)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    Media: Insert media and refresh to show available burn speeds

  • Combo Drive Reading nothing but DVDs

    I am trying to install a printer on a Macbook, which has a combo drive. When I insert the installation CD the drive doesn't start up and after about one minute it ejects the CD. The same thing happened with a pre-recorded music CD, a blank CD-RW and a blank DVD+R. However, when I inserted a DVD movie it worked properly. On my Macbook with a superdrive everything is working fine.
    Any help is very much appreciated.

    In case anyone wants to know the outcome.... I reset PRAM and SMC (as suggested by Apple in another user's post), but it did not work. I then phoned Apple and she straight away told me to take it in. She didn't even suggest any measures to try out first, just take it in. This Macbook is 7 weeks old. I was trying to use a printer installation disc and came across the problem. My daughter is leaving for university tomorrow and obviously needs to take her computer. Perfect timing. I am not impressed.

  • Matshita UJ-825 - Unable to read dual layer DVD+R

    Haven't had any issues with my Matshita UJ-825 until now. Have a DVD+R DL full of photos, but the Matshita will not mount it. When I insert the DVD it sounds like the drive is working to mount it and then just spits the DVD back out. What's really strange, a co-worker has the same UJ-825 in a 12" Powerbook and he can mount the DVD, no problem. The only difference is his UJ-825 has firmware revision DAM5. Here's the specs under "System Profiler" for my drive:
    Firmware Revision: DBN7
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2048 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, DVD-DAO
    I've read through A LOT of discussions similar to my problem, but none seem to have any answer. Thought I might try my luck. Any help is appreciated!
    iMac G5   Mac OS X (10.4.4)  

    I understand some people think "googling" is the end-all solution to finding resolution on certain issues. But, I wouldn't have posted here if I hadn't tried searching on Google to begin with.
    On that note, does anybody have other ideas beside searching Google?
    I know that Matshita is a part of Panasonic, but a search there turned up nil, as well.
    Anybody know if it's possible to copy the firmware from one Matshita and then somehow flash another Matshita with that firmware?
    iMac G5 Mac OS X (10.4.4)

Maybe you are looking for

  • How to change host name and domain name in installed Cisco Meeting Place Express 2.0?

    Hi I have  Cisco Meeting Place Express 2.0 installed on server. Meting Place uses Linux (Red Hat) as base operation system. Please tell me how I can change host name and domain name for Meeting Place Express application to integrate it into corporate

  • Is there a means to resend 'approval' emails again if not actioned:?

    We are using SRM server 5.0, Classic Scenario.  When approval emails are sent to users,we have many who don't process the carts in a timely manner. Is there a way to automatically trigger a resend the email or possibly some notification to indicate t

  • Project Billing - 1 time holds (how does it work)

    Can someone tell me how does the 1-time hold works in Project Billing? We thought it puts the items on hold until the invoice have been released to AR and it automatically releases the hold. However, our users have been reporting some inconsistency i

  • My MacBook Pro won't start. What do I do?

    I press The power on button and The screen Lights  up and the Apple logo appears. The little circle at th center of the screen begins to rotate. I wait and wait and nothing else happening. What's wrong?

  • SXMB_MONI results

    Hi all, 1. Can we view both the source and target messages under the SXMB_MONI   transactions. 2. What all steps of the execution pipeline do we skip, when we testing a interface     from RWB, i.e Pasting the payload in Test message screen. Thanks, Y