Can my iPad3 use WSP encrypted wi fi?

I am going to visit a friend's house. When I asked for his wi fi key/password he gave me a long, complex multi digit key. I queried this because WPA and WPA2 encryption enables the use of simple self chosen passwords. He explained that in France, where he is, WPS encryption is used (even required) and it is necessary to use the predefined long, complex key to connect to the home wi fi network.
My iPAD settings only list WEP, WOA, WPA2, and WPA Enterprise/WPA2 Enterprise.
Will I be able to connect to his home wi fi. If so, how?

According to his you can:
http://www.ehow.com/how_8785241_sign-wifi-ipad-password-forgotten.html

Similar Messages

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

How do I access my encrypted User Account files from my Back Up hard drive? Time Machine was used to create the back up disk; File Vault was used to encrypt the files.

Thanks. I will try going through TM. Since my Simpletech is on the way out, I'll be plugging in a new external hard drive (other than the back-up drive) and trying to restore the library to the new drive. Any advice or warning if this is NOT the right thing to do?
Meanwhile, that is a great tip to do an alternate back-up using a different means. It's been tough to figure out how to "preserve access" to digital images and files for posterity, knowing the hardware will always fail/obsolesce sooner or later, and that "clouds" are only as good as their consistent and reliable accessibility. Upping the odds with redundancy will help dull the edge of my "access anxiety", though logically, it can never relieve it. Will look into
Carbon Copy Cloner.

How do I import photos from my PC to my iPad3 using the latest version on iTunes?

How do I import photos from my PC to my iPad3 using the latest version on iTunes? The previous version had a 'photos' function in top right of the home screen but this has disappeared from the current version (Dec'12).

If you are on iTunes 11 on your computer then you can re-enable the left-hand sidebar via View > Show Sidebar (control-S), which should make it look similar to how it used to look - if you then select the iPad on that sidebar do you then get a Photos tab on the right-hand side ?

Digital ID used to encrypt a document, I think I lost my ID.

Ill try to keep this short as possible, but I want to include the story as to what I think happened.
We installed a new domain controller in our building and manually recreated all of the users. We used the same login names but the domain name changed. So using ProfWiz we migrated all of the user accounts to the new domain and now nobody can open the purchase order PDF's. Unfortunately I wasn't involved in setting up the digital ID's or setting the permissions on these documents and the person that did it was let go from his job a couple days ago. I still have his user profile and computer so I tried accessing the files from his account, but it is also on the new domain so I cant access the PDF's from the creators computer either.
Is there any way I can re-import these digital ID's or do I have to revert a computer back to the old domain? I'm not sure what are my other options are.
The error message I'm receiving is "A digital ID was used to encrypt this document but no digital ID is present to decrypt it. Make sure your digital ID is properly installed or contact the document author."

Just wondering if anyone has an answer for this? Or if its impossible, I dont want to waste my time with it either. Thanks.

Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

I'm getting the following error message when attempting to invoke "Find My Mac"
Some configurations such as a software or hardware RAID do not support a recovery partition and can't be used with Find My Mac.

You have no recovery partition. This is a normal condition if your boot volume is a software RAID, or if you modified the partition table after running Boot Camp Assistant to create a Windows partition. Otherwise, you need to reinstall OS X in order to add a recovery partition.
If you don't have a current backup, you need to back up before you do anything else.
You have several options for reinstalling.
1. If you have access to a local, unencrypted Time Machine backup volume, and if that volume has a backup of a Mac (not necessarily this one) that was running the same major version of OS X and did have a Recovery partition, then you can boot from the Time Machine volume into Recovery by holding down the option key at the startup chime. Encrypted Time Machine volumes are not bootable, nor are network backups.
2. If your Mac shipped with OS X 10.7 or later preinstalled, or if it's one of the computers that can be upgraded to use OS X Internet Recovery, you may be able to netboot from an Apple server by holding down the key combination option-R at the startup chime. Release the keys when you see a spinning globe.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
3. Use Recovery Disk Assistant (RDA) on another Mac running the same major version of OS X as yours to create a bootable USB device. Boot your Mac from the device by holding down the option key at startup.Warning: All existing data on the USB device will be erased when you use RDA.
Once you've booted into Recovery, the OS X Utilities screen will appear. Follow the prompts to reinstall OS X. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.
If none of the above choices is open to you, then you'll have to start over from an OS X 10.6.8 installation. There's no need to overwrite your existing boot volume; you can use an external drive. Install 10.6 from the DVD you originally used to upgrade, or that came with the machine. Run Software Update and install all available updates. Log into the App Store with the Apple ID you used to buy 10.7 or later, and download the installer. When you run it, be sure to choose the right drive to install on.

PDF Digital Signature using SM2 Encryption

Hi,
Is there any way to use SM2 encryption for digital signature in PDF instead of the default encryption?
Thanks,
Amir Mehmood

Hi Lrosenth,
Could you please help me with the following questions regarding SM2 encryption.
1) Whether Adobe China supports SM2 algorithm inside their Chinese version of Adobe Reader. US version does not support SM2 algorithm so signature validation will fail even if we were to use SM2 algorithm in our PDFs. This will be a key question to ask Adobe China and how they support viewing/validating of signed PDFs.
2) We use iText library to digitally sign the PDF document. iText uses BouncyCastle library (http://bouncycastle.org/specifications.html) to perform the actual encryption. SM2 algorithm is not supported by BouncyCastle out-of-the-box so we will need to extend BouncyCastle by implementing SM2 and modifying iText (open source version) to use SM2 for digitally signing the PDF. This could be a non-trivial task. So, the question is how do the Chinese digitally sign their PDFs using SM2? Do they use a third-party library that we can license?
3) Does Adobe China provide a PDF Java library for programmatically modifying and signing a PDF which is "Chinese"-compliant?
Thank you

June 10 2012 Firefox automatically updated itself (no choice) on my Intel Mac/Tiger 10.4.11. Can no longer use Firefox, so how do I get back the old one?

June 10 2012 Firefox automatically updated itself (no choice) on my Intel Mac/Tiger 10.4.11. I can no longer use Firefox. I have an old version of Firefox on my Mac G4, but am scared to use that machine in case that Firefox also automatically updates itself. How can I transfer a copy of that older version of Firefox (from the G4) to the Intel Mac, and how do I stop both versions from then automatically updating? How do I then remove the updated version of Firefox from the Intel Mac, which I cannot use? Thank you for your help.

esqki FF update to 13 and now you can't open ? sorry about that.
1. Download (with your safari) a copy of the latest (3.6.28) from your 10.4.11 mac
from
ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/3.6.28/mac/
2. '''Trash''' the current Firefox application to do a clean install.
3. Install the version that you have downloaded (3.6.28).
Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac Installing Firefox on Mac]
after install the 3.6.28 version go to: Options > Advanced > Update tab > Firefox updates, check mark '''Never check for updates (not recommended: security risk)''', click Ok to save it, exit firefox and restart it.
https://support.mozilla.org/en-US/kb/settings-network-updates-and-encryption#w_update-tab
thank you

E90 do you use a encryption software ?

there are different softwares which give your E90 a extra encryption for your files. Which software do you use ?

No, I thought about it and decided that a screen protector was not something I needed. The reasons:
* Key marks are generally finger oils, not physical scratches, and are therefore not permanent and can be removed using a damp cloth and gentle pressure. I have had my PowerBook for 2 years and this has held true. Various parts of my PowerBook have deteriorated far faster than the screen.
* I didn't want to have this additional thing to have to remove after opening the lid and to replace before closing the lid. To me that's annoying and complicates the experience. I love being able to get going as soon as I open the lid.
* I transport the PowerBook in such a way to avoid having other items in the bag compress the lid to the keyboard. If you carry a PowerBook in a backpack with 3 classes worth of textbooks and give the bag a hard landing on the library table with the PowerBook on the bottom, well, you might make some permanent marks that way.
* When thinking about all the things I might want/need to buy with the amount of money the screen protector would cost, I decided the screen protector was way far down on the list.
Nothing personal to those who find screen protectors useful, but that's the reasoning I arrived at. My opinion is that screen protectors are one of the many accessories that profit from unfounded consumer anxieties.

WSDL 'portType' can not have child 'wsp:Policy' of

hi experts,
I get this error message. What is wrong can you give me pls. an advice
to solve this problem.
Cannot download WSDL from http://treman:8000/sap/bc/srt/
wsdl/bndg_DDBAF5E4EC01D5F193F7000C29210034/wsdl11/allinone/ws_policy/document?sap-client=100:
WSDL 'portType' can not have child 'wsp:Policy' of namespace 'http://schemas.xmlsoap.org/ws/2004/09/policy' !

Dear SAP User and Developer,
are you saying there is no other possibility to change the the port type besides
the way with using "standard" instead of "ws_policy" in the URL.
I think there must be existing another solution.

Is it enough only use RSA encryption?

Hi all,
I want to know is it enough if we develop Java Card application by using only RSA encryption?..
if on-card application uses RSA, and so off-card application uses RSA, is it mean that we have to use 2 KeyPairs?..
I mean, the off-card shall generate Pub and Priv Key, Keep Priv-Key secret, and the Pub key is distributed to card..
and of course on-card do same thing, it will generate Pub and Priv Key, Keep Priv-Key secret, and the Pub key is distributed to Off-card application..
Please correct me if this wrong..
if this isn't wrong, do i still have to use X509Certificate?..
Thanks in advance,,

Thanks Lexdabear and Shane for your reply..
Actually, i'm a little bit confused how do i can make sure the data is being sent is confidential and valid (it means that the data received by receiver is same with the data sent by sender)..
Hm, i read from the PDF document that i downloaded from the internet, says that :
● Signing
Use private key to sign data
● Verification
Use public key to verify signature
● Encryption
Use public key to encrypt data
● Decryption
Use private key to decrypt data
Can i mix these features together if i only use single RSA Key-Pair (only on the card side)?, assume that the on-card application hold only Private-Key, can on-card do these features together ((encrypt, decrypt, sign, verify) if it has only Private Key? ..
based on that, it means that if we use only single RSA KeyPair, assume that the Card holds the Private Key and the Off-card holds the Public-Key, so the application in the card can only do Sign and Encrypt data before data sent to the off-card, and of course, the off-card can only do Verify signature and Decrypt data received..
So, how the card can decrypt and verify the signature of the data sent by off-card if the card doesn't hold the public key of the off-card ?
i thought the off-card SHOULD send its Public-Key to the on-card application, so the On-Card application can do Decrypt and Verify the signature of data sent by Off-Card..
i thought single RSA keypair isn't enough (My point of view as a less of experience programmer)
Please correct me if i'm wrong..
Thanks in advance..
Edited by: Leonardo_Carreira on Jun 22, 2010 2:22 AM

Does anybody know what encryption technique OIM uses to encrypt password

Hi,
We have a requirement where we need to decrypt the password of xelsysadm and connect to OIM and do the updates on usr.
I need help in decrypting xelsysadm password. Please help of anybody have implemented the same in their project. What encryption method OIM uses to encrypt users password or how can we decrypt xelsysadm password?
We are implementing a webservice which will call OIM API and will do the user updates. Inside the web service, we need to first connect to OIM DB. For that SOA component BPEL is calling the webservice. I need to implement the logic of decryting oim xelsysadm password here so that it can update user attributes in IDM DB table.
I have the code but I dont know what value should I provide here in "DBSecretKey".
com.thortech.xl.crypto.*;
public class DecryptPassword
public static void main(String[] args) throws tcCryptoException
String s1 = tcCryptoUtil.decrypt("ANV/pHAm9zWfcyS0H40REg==","DBSecretKey" );
System.out.println(s1);
Plese help if anybody have implemented the same in their project.
Regards,
Kalpana

Thanks Kuldeep for your quick response.
I got the answer for my question. We just need to give OIM user id like xelsysadm to the code and the below code works fine.
import com.thortech.xl.crypto.*;
public class DecryptPassword
ConfigurationClient.ComplexSetting config = ConfigurationClient.getComplexSettingByPath("Discovery.CoreServer");
Hashtable env = config.getAllSettings();
tcSignatureMessage moSignature = tcCryptoUtil.sign(oimUser,"PrivateKey");
tcUtilityFactory ioUtilityFactory = new tcUtilityFactory(env,moSignature);
Here Private key takes all environment variables including the password from OIM client and makes the connection. So, no issue of password encryption & decryption or specifying password in the code.
Regards,
Kalpana.

Can core system files be encrypted?

Does anyone know what would happen if you took a brand new Windows 7 Pro OS and after installing all critical updates and setting up all customizations, a person used EFS (Encrypting File System) and encrypted core system files? I've read about Windows File
Protection (WFP) which prevents programs from replacing critical Windows system files, but this tool depends on the files sitting in a cache. So why not encrypt the system files as an alternative.
*In this scenario I'm only thinking of a single user who still has access to the internet.

Yes you can encrypt all files and folders along with windows file using a 3rd part application. you can google for specific applications.
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

How can 2 people use itunes in the same household? we both have iphone 4 and separate id but the same itunes? pleasehelp

how can two people use itunes in the same household? i had a iphone before so alreday had an itunes account now me and my husband have upgraded and we now both have them. he has set up a username and i have mine yet when he logs in he seems to just get my account? please help

Decide which iPhone will be keeping the current iCloud account. On the one that will be changing accounts, if you have any photos in photo stream that are not in your camera roll or backed up somewhere else save these to your camera roll by opening the photo stream album in the thumbnail view, tapping Edit, then tap all the photos you want to save, tap Share and tap Save to Camera Roll. If you are syncing Notes with iCloud, you'll also have to email your notes to yourself so they can be recreated in the new account as they cannot be migrated.
Once this is done, go to Settings>iCloud, scroll to the bottom and tap Delete Account. (This will only delete the account from this phone, not from iCloud. The phone that will be keeping the account will not be effected by this.) When prompted about what to do with the iCloud data, be sure to select Keep On My iPhone. Next, set up a new iCloud account using a different Apple ID (if you don't have one, tap Get a Free Apple ID at the bottom). Then turn iCloud data syncing for contacts, etc. back to On, and when prompted about merging with iCloud, choose Merge. This will upload the data to the new account.
Finally, to un-merge the data you will then have to go to icloud.com on your computer and sign into each iCloud account separately and manually delete the data you don't want (such as deleting your wife's data from your account, and vice versa).

How can I stop using my primary Apple ID (Gmail) but leave my secondary Apple ID (icloud) as primary ond only ONE?

Good afternoon friends.
Please help me and tell how can I stop using my primary Apple ID (Gmail) but leave my secondary Apple ID (icloud) as primary ond only ONE?
I started using Apple ID in 2011 when iCloud was not exist and was forced to use non-apple e-mail adress as primary ID.
So I used GMail mailbox.
When iCloud was started I created my account but unfortunatelly can't remove this Gmail address from my Apple ID and replace it with icloud mail address.
I was VERY dissapointed because I don't want to use "outside" mailbox to get letters from Apple and ny ID.
In fact I see the Apple old users and fans discrimination.
When creating new user accounts are free to create a box on the iCloud mail and use it as a primary ID, and the only ONE.
At the same time the old user is obliged to keep third-party mail box like Gmail etc. as the primary and can not get such an opportunity, as a new user
This is extremely inconvenient and a VERY strange logical.
For example, now I want to stop using this mailbox on Gmail but I can not do that because in this case I lose access to my ID, or run the risk that someone in the future will create a box with the same name on Gmail (when name will be free and available) and will automatically get access to my accounts on Apple and to my Apple ID.
Now, to avoid this, your team, I offer the only way out: ID, create anew.
Of course it's possible, but then:
- I lose all my purchases for 3 years and will be forced to make them again and pay money for the second time for my purchases
- Lose access to the familiar iCloud e-mail address who now serves as secondary ID because this e-mail address is almost no longer available and will never be released in future.
And now answer me for ONLY TWO questions:
- WHERE IS LOGIC?
- WHAT ABOUT TO BE FRIENDLY FOR YOUR USERS AND FANS?
Thank you!
Hopefully for your GOOD answers.

You cannot make your @icloud.com address the login address for the ID. However you can change your ID, currently a Gmail one, to any other functioning non-Apple email address. The Gmail address would then no longer access your account, and so even if someone were to obtain posession of it (is that even possible) it wouldn't allow them to get into your account.
If you want to change your ID to another email address please follow the procedure outlined below, particularly noting the first step.
Firstly, if you have 'Find My iPhone/iPad/iMac' enabled on any of your devices, turn it off.
Create a new email address, for example at Yahoo or Gmail, or anywhere convenient (or you can use an existing address as long as it has never been associated with an Apple ID).
Go to http://appleid.apple.com and click 'Manage your Apple ID'. Sign in with the current ID.
Where it says 'Apple ID and primary email address' and gives your current ID email address, click 'edit'.
Enter your new address and click 'Save changes'.
Now you will need to go to each of your devices and sign out in System Preferences (or Settings)>iCloud - 'Sign out' on a Mac, 'Delete this account' on an iOS device (this will not delete the account from the server).
Then sign back in with your new ID. Your iCloud data will disappear from your devices when you sign out, but reappear when you sign back in.
I re-iterate: before you start, turn off 'Find My Mac' (or whatever) or you will need the services of Support.

HT2589 We have purchase 5 apple minis and would like them all on one account. That way we can monitor the use of these units. they will be used strickly for a business application. can I use one account in itunes or must i have multiple.

We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units. They will be used strickly for a business application. Can I use one account in itunes or must i have multiple.

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Can my iPad3 use WSP encrypted wi fi?

Similar Messages

Maybe you are looking for