Can my mac book pro get the newest software? its on 10.6.8? I want 10.8.4?
can my mac book pro get the newest software? its on 10.6.8? I want 10.8.4?
Open the Mac App Store and try downloading Mavericks. If you're told the computer's incompatible, no.
(93333)
Similar Messages
-
You can't use this version of the application Logic Pro with this version of Mac OS X. (Logic 9.1.1)But use it in My Imac with same Os.Lion without problems.
any Ideas why?
insane..Thank you blueberry. It just work
I better put down the coffee and get some sleep. Thanks again. -
My mac book pro (not the newest one) will not turn on.
it can be charged and will bring up the loading screen but thats as far as it goes. it freezes on the load screen and never moves. its a little over a year old and iv never had problems with it. can some one please give me an answer??
Go into the recovery partition and use DIsk Utilities:
http://www.apple.com/macosx/recovery/
http://support.apple.com/kb/TS1417
Success? Post here, whether or not - others will be able to learn from this info! -
HT1338 mac book pro gets unusually hot
Mac book pro gets unusually hot. Its only a year old . Anybody out there have s suggestion ?
I have just been to the Genius Bar with this question, among others. They recommended that I download "SMCFancontrol", also recommended above by EyeHeartDesign. It's available free at http://www.versiontracker.com/dyn/moreinfo/macosx/31029. Like iStatPro it monitors temperatures, but it also allows you to set a faster default fan speed and a target max temperature.
At the Genius Bar I was also advised to clean out the vents with compressed air and to make sure that I am not blocking the vents while I use the computer.
We'll see if this all works, as it has been running hotter than usual lately. I was afraid that components were getting fried, but was assured that the other issue this computer has (keyboard and trackpad stop working) is unrelated. Looks good so far - with fans at the new default of 4000 rpm, temp is 40º C. -
what do i need to connect my mac book pro to the tv with the mac's thunderbolt port to hdmi? I have the newest macbook pro. I'm wanting to have the best picture I can get from my 1080p tv. thanks
Thanks Community! I solved the problem. In fact it was not a problem but lack of understanding. These guys at Apple are way ahead in thir thinking. I will try to explain as short as I can.
In Lion, ihe Prefferences/Display show only two choices: 6-7 steps of resolution and some color tab. No two screens, no two display to overlap, nothing for us to do. "That was the problem"! Everything is automatic.
When I connected the HDMI cable to the Miniport into a T-bolt slot, the TV screen showed the "spiral galaxy" how Zyriab is calling it. In fact he gave me the best clue. That shows the connection is good. But where is the Mac Book image?
You have to drag it to the right out of the Mac Book display area, and "voila!" it will continue on the TV screen. The same with the mouse pointer, push it out ofthe Mac Book display area and you see it on the TV sreen. Good image, you can keep the max resolution, etc. The sound is still on the Book's speakers. I have to figure that out.
Thank everybody, especialy Zyriab, ne was the closest.
High regards to everybody -
I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive. I can only get so far throughj the process where its about to start cloing when I get a message " error 254". Any idea what that means and how do I get around this issue so I can use my new hard drive? Thanks for your input.
VinceConnect the HDD to your MBP. Open Disk Utility>Erase and drag the HDD icon inrt the Name field. The format should be Mac OS Extended (Journaled). Click on the Erase button.
Then try the clone process again. You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
Ciao. -
i need to use an hp 6215 printer with my mac book pro. the driver installation disk doesn't work. where can i get a driver that will work?
With the Lion it is essentially unnecessary to resort to external driver disks. What's more, most of those disks are incompatible with the OS and should not be used. The system already carries a wide variety of printer description files (aka PPDs, which is what modern printing systems use as "drivers") for a lot of brands. And there was an HP printer update just two days ago.
Just checked in mine and did indeed find that the HP OfficeJet 6200 Series, with or without Fax, is covered with the latest update.
So just go thru the motions of creating a proper printer instance:
Make sure the Mac "sees" the printer on the network.
System Preferences / Print & Scan
Click on the + button on the left column
Select the appropriate type of printer, will use IP for the rest of this
Select HP Jetdirect - Socket, default for HP network printers
Type the IP address or look it up
Name the printer for easy identification on the print dialog
Let the Mac identify the printer model or manually choose the driver
Click Add.
Once the instance pops up in the list, can click on Options & Supplies for further config. -
I purchased an app for my Mac Book Pro. The app is called djay. Unfortunately it won't download. I get the following error message: Error 1004 please try again later. How can I resolve this issue?
Try contacting the app developer via email here > http://help.algoriddim.com/customer/portal/emails/new
-
Hi- I keep getting an error message show up when I sync my iPhone to my Mac Book Pro. the message is that I can't copy to the Macintosh disc because I don' have enough access privileges. Then when I click ok my phone gets stuck syncing. any thoughts?
Sounds like a possible permissions issue, try repairing the permissions using Disk Utility.
You can open Disk Utility several ways.
1. Use the Spotlight in the Upper Right corner of the screen and search for it, then click it to open it.
2. Open a new finder window (File> New Window)
- Applications>Utilities>Disk Utility
3. Click on the Finder
- Click 'Go' in the menu bar across the top of the screen.
- Click Utilities, then double click on Disk Utility.
Once Disk Utility is open there should be a column on the left side, the name of your hard drive should be listed there.
(By Default it is named Mac HD or Macintosh HD)
Click on it to highlight it.
There should then be a few buttons you can click
- Verify Disk Permissions
- Repair Disk Permissions
- Verify Disk
- Repair Disk
Click Repair Disk Permissions -
My Mac Book Pro changes the saved home page each time I open Safari. I am also getting random tabs opening with various "cleaning up" my computer junk.
How do I get rid of this? I tried some of the fixes listed but they don't seem to work or I am doing something wrong.
THanks
WendiYou may have installed one or more of the common types of ad-injection malware. Follow the instructions on this Apple Support page to remove it. It's been reported that some variants of the "VSearch" malware block access to the page. If that happens, start in safe mode by holding down the shift key at the startup chime, then try again.
Back up all data before making any changes.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those. If Safari crashes on launch, skip that step and come back to it after you've done everything else.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, ask for further instructions.
Make sure you don't repeat the mistake that led you to install the malware. It may have come from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
Malware is also found on websites that traffic in pirated content such as video. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked. -
I have my Mac Book Pro with the OS Yesomite since a month and I am feeling that my mac is getting slower than before a month. I want to install OS Lion on my mac. I think i have a DVD of OS Lion which comes when i bougnt Mac laptop in 2011. Should i install OS Lion? What wil happen if i install OS Lion, do i lost my Applications or ...????
Hi, the last install dvd that came out for mac's was Snow Leopard,10.6.3. Lion is a download from apple. You cannot just install it over Yosemite. You would have to backup your drive to save files you want and do a clean install. You might want to look into getting more memory. You can run 8 Gig"s of memory on your Macbook Pro.If your Macbook Pro is getting really slow you might want to download EtreCheck and then post the results here.http://www.etresoft.com/etrecheck Check out this article. http://support.apple.com/kb/PH19031
-
I am getting no signal to my dj mixer using m-audio firewire audiophile sound card connected to my mac book pro using Traktor Dj software can anyone help?
The firewire port reads the dj software and I can hear music playing through the sound card when I plug my headphones into it but there is no signal to the hardware (my dj mixer).
I have reset the firewire by turning off my mac book pro for a few hours and can see the sound card device in the fire wire section after clicking on the apple icon on the top left corner of my mac.
My dj mixer works on another mac computer with the same soundcard and different firewire cable.
Hope someone can help
Thanks
Waynekmiddlet88,
yes, it could be due to nearly anything listed in your kernel extensions, startup items, launch daemons, launch agents, or user items above. Please check all of your installed third-party software to make sure that the versions which are installed on your MacBook Pro are compatible with Mavericks; uninstall every software package which isn’t Mavericks-compatible. After you’ve done that, boot into Safe mode, and see if you still get the beach ball of doom there. If it doesn’t appear there, restart normally and see if it appears then. -
After updating my mac book pro to the osx yosemite.am getting some issues after starting up.as soon as it gets on the destop the screen start blinking and i cant do anything.Please help me!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
I dropped my mac book pro and the screen has now got a black rectangle and pink and green lines down it. What is it and how do i fix it?
Sounds like the display got damaged. Connect an external display and see if that's OK. If that's OK then the display is probably damaged. You can try reseating the LVDS connector but if that doesn't help the connections on the display body are very difficult to get to. Apple would just replace the entire display and that's what I would do as well.
-
Hi
Please don't make multiple posts, your question has been answered in your other thread.
I have imported my music from my iPhone to my Mac book pro. The problem is that now I can't listen to it. It's stating that my computer is not authorized. How can I authorize??
Maybe you are looking for
-
How do I make an Apple ID without a credit card?
I'm only 14 therefor I have no access to a credit card.
-
I can't drag files from iTunes to my iphone 5, I get an alert that says files can't be copied because I have iTunes Match enabled but I do not have iTunes M
-
Hi, I was just curious as to how a LinkedList would work in the following case: [ A ] -------> [ B ] ---------> [ C ] Say I am currently at position B in the LinkedList and I decide to remove the element at position B, would position C still be the n
-
Dear All SAP SDN Guru's I am settling cost on maintenance ORDER through ko88 with automatic processing type, in some maintenance orders, system is not settling the full cost instead it is settling cost partially. For example, I created a maintenance
-
Why doesn't this program compile?
Compiling this program: public class Foo<T> { private final Class<T> type; public Foo(Class<T> type) { this.type = type; public T cast(Object obj) { return this.type.cast(obj); public void handle(T obj) { static