Can my macbook 5.2 take ddr3 memory?
Can my macbook 5.2 early 2009 take ddr3 memory? I have upgraded it to 4gb ddr2, but could I upgrade it further to ddr3 8gb? I have read somewhere you can but just to be sure.
Coxy230 wrote:
Can my macbook 5.2 early 2009 take ddr3 memory? I have upgraded it to 4gb ddr2, but could I upgrade it further to ddr3 8gb? I have read somewhere you can but just to be sure.
This is the RAM information for your MacBook
Built-in Memory
None
Maximum Memory
6.0 GB (Actual) 4.0 GB (Apple)
Memory Slots
2 - 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM
Minimum Speed
Interleaving Support
Yes
So basically you can only use DDR2 which you have in it, but it is upgradable to 6GB instead of just the 4 that you have in it
Similar Messages
-
How much RAM can my MacBook Pro REALLY take?
I want to max out my MacBook Pro. The apple website, and apple representative I spoke with on the phone told me that 8GB is the max. I have read that some people have used 16GB of RAM. The Apple representative refused to say that the MacBook Pro is compatable with 16GB.
Is it true that I can use 8GBx2 in my computer. If so, is it potentially dangerous? Why won't Apple say it supports it if it does?
I'm using a 2012 MBP '15 2.3ghz Intel Core i7 (not retina)
Currently using 4GB 1600mhz DDR3 memory.
Let me know!
GregMost importantly DO NOT PUT IN 1.5volt memory.
Your macbook air mid-2012 and on takes 1.35V memory. Will it work with 1.5V? yes and no, its known to cause issues, some serious.
MOST retail electronics shops DO NOT carry 1.35V memory. Dont try to put in memory from there. Order it online or from the apple store.
Dont make a serious mistake that can cause issues and even cause a warranty issue if you place in the WRONG voltage memory. -
How much memory can my Mac Book take?
Below is the spec:
Model Name: MacBook Pro
Model Identifier: MacBookPro5,4
Processor Name: Intel Core 2 Duo
Processor Speed: 2.53 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Thanks - Sebon a similar note, I have 4GB in my 4.1. I take it that is it's max?
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B03
SMC Version (system): 1.27f3 -
Hi
Is there any difference between DDR3 memory and LPDDR3 memory? As i brought my macbook air 2013 recently and i saw the specifications in the system info that is indicating DDR3, but apple website stated LPDDR3. Anyone can advise on this?Welcome to Apple Support Communities
Read > http://en.wikipedia.org/wiki/Mobile_DDR DDR is the RAM used in computers, and LPDDR is common in mobile computers -
I have a Mid 2009 15 inch MacBook Pro with 2.53 GHz Intel Core 2 Duo and 4 GB 1067 MHz DDR3. Can this MacBook be upgraded to 8GB? If so, what type would you recomended
Awesome! Thank you What about the Corsair brand?
http://www.amazon.com/Corsair-DDR3-Laptop-Memory-CMSO8GX3M2A1333C9/dp/B002YUF8ZG /ref=cm_cr_pr_product_top -
Can my Pavilion 3204tx take ddr3 1666 or 2000 or only 1333 mhz?
Hi, I cannot get any answer from hp as to whether my pavilion 3204tx can take ddr3 1666 or 2000 ram. The machine currently has 4 gb of ddr3 1333 mhz ram and the manual says it can take up to 8 gb of ram. i am running 64 bit win 7 premium and some memory vendors have said this laptop can take 2000 mhz and 1666 mhz memory. I am going to upgrade the memory to 8 gb and would like to use the higher clock speed if I can. Does anyone know what memory this machine can take?
Thanks very Much
hx350chevHi,
Please write your notebook product number (p/n) and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.
Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here. -
How do I find out how much memory can my macbook upgraded?
How do I find out how much memory can my macbook upgraded?
You can use either Everymac http://www.everymac.com/ or the freeware MacTracker http://www.mactracker.ca/
to get the info if you don't want to share the specs of your MacBook here.
Regards
Stefan -
MS-6528LE Can only take one memory module at a time
The paticular board I am posting about can only take one memory chip at a time i.e. I install one memory chip it's 133MHZ chip 128MB boot up my machine goes to windows just fine.
I am using windows xp btw.
Ok when I install a 2nd 128MB PC 133 chip I get the blue screen right before I get into windows and it gives some really weird error.
I take the second chip out leave one chip in and it works just fine I am at a loss of this one.
I tried updating the bios didn't work could use some assistance here by email or a nice reply.Thats the problem. My powersupply maxes out at 300W and goes no higher than that. It seems it needs more power.
I will get a powersupply that is more suitable for this motherboard and post again with the results I get. Thanks for your help I can say that this company has been more helpful than others.
Once again thanks. -
I tried to customize the Envy 15t but I can't proceed on upgrading the following.
Error
24GB SSD Acceleration Cache requires purchase only up to 8GB System Memory.
Why can't I use the 16GB DDR3 System Memory (2 Dimm) with 24GB flash Hard Drive Acceleration Cache?
Can HP explain this to me? or any one? pleaseHi,
The 24Gb cache drive will store manything and normally it will need at least twice the size (capacity) of RAM. Double 16Gb is 32Gb therefore 24Gb is not big enough.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Can I replace the DDR2 Memory in my F730 Laptop with DDR3 Memory?
Can I replace the DDR2 Memory in my F730 Laptop with DDR3 Memory?
Hi,
Unfortunately you can't do this as the modules are physically different.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Can I take a memory card from an iphone 5c and put it in a 4s?
Can I take the memory card from a iphone 5c and use it in a 4s?
Since the memory is not removable from the phone, and the phone does not have user serviceable parts, and it voids the warranty and post-warranty support if you open up the iPhone.....................I would say no. That does not take into account a number of differences in the internals of the phone either.
-
How much RAM can my Macbook Pro hold MAX?
Can my Macbook Pro hold a MAX of 8GB or is it just 4GB? I'm getting different answers online and I'm a little annoyed at this point. My computer specs currently are:
15 inch Laptop
MacBook Pro 2.6 GHz Intel Core 2 Duo
2 GB 667 MHz DDR2 SDRAM.
Got my computer in 2009.
At Crucial.com it says it can hold up to 8GB when I select my computer processor speed from their list, but I noticed it saying DDR3 (and I don't know what that means to be honest). Here's the link:
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=7F3A5584A5CA7304
To the best of my knowledge I selected the correct computer, which I own, from their list.
Under "About This Mac", on my computer, it says DDR2 for the memory, on Crucial.com it says DDR3. As a result I'm confused and will that cause problems?
I'll be getting my RAM kit from Crucial.com, so do I buy the 4BG kit, because that's all my laptop can handle, or is it OK to get the 8GB kit, which says DDR3?
I do a lot of video and audio, so I would like to get my RAM up to 8 GB if it will.
ThanksOne more question friend....You've been so helpful
Will these two sticks work together on my machine?
2GB, 200-pin SODIMM, DDR2 PC2-5300 memory module
http://www.crucial.com/store/mpartspecs.aspx?mtbpoid=B54C51B4A5CA7304
along with a...
4GB 200-pin SODIMM DDR2 PC2-6400 Memory Module
http://www.amazon.com/Crucial-CT51264AC800-200-pin-SODIMM-PC2-6400/dp/B001RB21JE
So these two would add up to 6GB total. Now the ONLY DIFFERENCE that I see is the 2GB stick is PC2-5300(667Mhz)speed and the 4GB stick is PC2-6400(800Mhz)speed. I understand that my machine won't run at the 800Mhz speed that the PC2-6400 stick is designed for, cause my machine says 667 under the memory info. From what I read online, it's ok to put a higher Mhz stick in there, it will just cap at 667Mhz speed? But.......both sticks are DDR2, which is right for my computer, but will the 667 MHz with a 800 Mhz be a huge no-no to run together? At this point I think that is my main concern! If I can't do this, than I think I'll have to go with the 2x2GB kit for 4GB total, but I REALLY would like to run 6GB.
Shew.... :P
Thanks again! -
How much RAM can my MacBook Pro hold?
I've seen a bunch of these type of questions on here, and have gotten mixed answers. Some people say that the max is 6GB and some say the max is 8GB.
Here are my specs:
MacBook Pro 15-inch, Mid 2009
In Memory it says:
Your Mac contains 2 memory slots, each of which accepts
a 1067 MHz DDR3 memory module.
I currently have 2GB of RAM in each slot
Crucial seems to think that I can get an 8GB upgrade kit:
http://www.crucial.com/store/listparts.aspx?model=MacBook%20Pro%20(15-inch%2C%20 Mid%202009)&Cat=RAM
has anyone done this with a similar comp? Is 8GB possible?
Thanks for your help!!A model 5.4 15" 2009 MBP will recognize 8 GB RAM with the following specifications: 204-pin PC3-8500 (1066 MHz) DDR3 SO-DIMM.
The best sources for Mac compatible RAM are OWC and Crucial.
Ciao. -
Can syncing Macbook pro w/ iPad cause slow performance?
Can syncing Macbook Pro, OS 10.9.5, mid-2010 vintage, w/ an iPad slow the performance of the MBPro?
Thanks for the thought. My Macbook Pro is running slow in all ways. I have done all the suggestions given to me in my previous question about "50 second startup" etc. including etrecheck (see below) with nothing helping.I have not reset my directory or typed "purge" in terminal. Should I do them?
Hardware Information: ℹ️
MacBook Pro (15-inch, Mid 2010) (Technical Specifications)
MacBook Pro - model: MacBookPro6,2
1 2.4 GHz Intel Core i5 CPU: 2-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1067 MHz ok
BANK 1/DIMM0
4 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Battery Health: Normal - Cycle count 244
Video Information: ℹ️
Intel HD Graphics - VRAM: 288 MB
Color LCD 1440 x 900
NVIDIA GeForce GT 330M - VRAM: 256 MB
System Software: ℹ️
OS X 10.9.5 (13F34) - Time since boot: 1:21:21
Disk Information: ℹ️
Hitachi HTS545032B9SA02 disk0 : (320.07 GB)
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / : 319.21 GB (248.71 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-ST DVDRW GS23N
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Logitech USB Receiver
Apple Inc. Built-in iSight
Apple Computer, Inc. IR Receiver
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.wacom.kext.wacomtablet (6.3.7 - SDK 10.8) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[running] com.canon.MFManager.plist [Click for support]
[running] com.wacom.wacomtablet.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.adobe.ARM.[...].plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
User Login Items: ℹ️
AirPort Base Station Agent Application (/System/Library/CoreServices/AirPort Base Station Agent.app)
WDSecurityHelper Application (/Applications/WD Security.app/Contents/WDSecurityHelper.app)
Internet Plug-ins: ℹ️
WacomNetscape: Version: 2.1.0-1 - SDK 10.8 [Click for support]
Default Browser: Version: 537 - SDK 10.9
WacomTabletPlugin: Version: WacomTabletPlugin 2.1.0.2 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.296 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.20513.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.296 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.7
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Click for support]
CANONiMAGEGATEWAYDL: Version: 3.2.0.1 - SDK 10.6 [Click for support]
GarminGpsControl: Version: 4.0.3.0 Release - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Move-Media-Player: Version: npmnqmp 071101000050 [Click for support]
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
WacomTablet [Click for support]
Time Machine: ℹ️
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
Macintosh HD: Disk size: 319.21 GB Disk used: 70.50 GB
Destinations:
External HD [Local]
Total size: 999.83 GB
Total number of backups: 3
Oldest backup: 2014-06-10 23:05:50 +0000
Last backup: 2015-01-05 17:41:37 +0000
Size of backup disk: Excellent
Backup size 999.83 GB > (Disk size 319.21 GB X 3)
Top Processes by CPU: ℹ️
6% WindowServer
3% systemstatsd
0% fontd
0% AppleSpell
0% configd
Top Processes by Memory: ℹ️
344 MB com.apple.WebKit.WebContent
172 MB com.apple.IconServicesAgent
146 MB softwareupdated
103 MB mds_stores
77 MB systemstats
Virtual Memory Information: ℹ️
4.78 GB Free RAM
2.16 GB Active RAM
616 MB Inactive RAM
1.04 GB Wired RAM
434 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Feb 4, 2015, 12:17:24 PM Self test - passed
Maybe you are looking for
-
After backing up my photos on a My Passport hard drive I can't open iphoto from the hard drive. It says "You can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of ip
-
I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback. Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found This error is
-
Hi All We are likely to get a RFP from one of our client, i have been asked to ready to respond to the RFP with questions and other related information from MM perspective. I have basic idea about what is RFP but have no experience on reponding on to
-
Can I use this code to self Generate month ? ie Jan, Feb, Mar
Hi can some one tell me is this possible to do. I am making a Date Of Birth using combo box�s this is the code I am using to generate the date. My question is can I use this for the month i.e. Jan, Feb, Mar etc private void DayOfTheMonth(int highNumb
-
Updating multiple workbooks to a new substatus in performance mgmt.
Hi I have a number of employee performance management workbooks that are all at a certain substatus right now, and I would like to be able to update them to a new substatus (basically move them back to an earlier substatus as the documents have been