Can my Powermac G5 use a Hauppauge HDPVR?

I want to buy a new HDPVR to record my xbox 360 with to my Powerman. But before i spend the 200$ on this thing i want to be sure i wont waste my money if it wont work. So will it work? i didint see anyting on their website about using powermacs so im not sure

Well i have seen someone on a imac use one , but not sure on mac
iMac is a Mac.
You mean an Intel vs PPC?
The HDPVRCapture software says OS X 10.4 support has been dropped, but other than that, I would check with the developer on what version supports your machine specs.
Scratch that ast comment:
System Requirements
Mac OSX 10.4 / 10.5 / 10.6
Universal Binary PPC or Intel.
Hauppauge HDPVR 1212 H.264 Hardware Encoder
Spare USB2 Port. USB1 ports on older Macs (G3) will work, but you will need to keep your video capture bitrates below 11Mbps 8Mbps to avoid problems.

Similar Messages

I have moved from a G5 Powermac to an Intel Mac Pro and am porting over Items from a Backup HDD. How can I access and use drawings and documents created on the PC computer on the Intel computer ?

I have moved from a G5 Powermac to an Intel Mac Pro and selectively porting over items from a backup hard drive.
How can I access and use documents and drawings created on the PC based computer ?

Clarisworks, you need Appleworks, which will only work with Mac OS X10.6.8 or earlier. See this tip if you must go newer. Mac Pros with newer hardware configuration than July 20, 2011 can't use Mac OS X 10.6.8 or earlier without this tip and then it would be Mac OS X Server. I'm not sure if the new black Mac Pro supports that configuration or not.
iPhoto, there is an iPhoto for all versions of Mac OS X.
iTunes, there is an iTunes for all versions of Mac OS X. Note with iTunes versions 11 and later, which are needed for syncing with iOS 7 or or later, you will lose coverflow, if you liked that feature. Sadly you can't run an older version of iTunes from within Mac OS X 10.9 or later.
Sketchup: http://help.sketchup.com/en/article/60107 shows the versions that will work with intermediate Mac OS X versions, and this shows the latest version: http://help.sketchup.com/en/article/36208 be sure to click on the operating system you choose to use.
GIF - Viewing GIFs Apple's Preview can do that. Editing them, I like http://www.lemkesoft.com/ Graphicconverter.
DMG is able to be opened by all versions of Mac OS X. This are just "disk images" which store programs on a virtual disk that will open when double clicked. Frequently you'll find the installer of the said program inside. To find out if the program itself is compatible with 10.7 through 10.9, see http://www.roaringapps.com/
Otherwise see the resources on:
https://discussions.apple.com/docs/DOC-2455
If you end up deciding to stick with Snow Leopard.

I have a PowerMac G5 using an Edimax EW-7811Un that is unable to communicate over Bonjour with other systems on our network

I have a PowerMac G5 using an Edimax EW-7811Un that is unable to communicate over Bonjour with other systems on our network. On occassion, I can see it appear on iChat on our Network but it doesn't receive any incoming traffic and will drop off soon after.
The PowerMac G5 does not see any other system over Bonjour.
Any help or solutions for getting my PowerMac G5 to be visible on our network would be greatly appreciated.
Thanks!
-Phil

I do not understand why you are using Bonjour. You should be able to configure the g5 to use your router for network setup.
Do you have all of your devices using the same router? You should.
I'm assuming this is a small configuration with one router.
Robert

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini

How can I send email using two different email address that both link back to my one exchange account on my Ipad mini?
On my PC I simply have a master return email address and use a POP for the secondary address. Both are through the one exchange account without a problem. I need to be able to do the same on my Ipad.

Ah, I should have made that clear. My domain didn't come from google. It was purchased at and is hosted at dreamhost, but I haven't used their email servers in years - I just route everything through gmail. I actually have a bunch of domains (with websites).
Gmail has an option that lets someone with custom domains send (and receive) email through gmail using the custom domain once Google confirms proper ownership of the domain (to prevent spammers and such). Gmail has a setting for "send email as" which allows gmail to be sent using a custom domain as the sender. I'm pretty sure Apple's old mobileme had this feature too, but I didn't use it.

Can my MacBook Pro use boot camp with Windows 7 with BitLocker encryption?

I'm at wit's end with this, and I'm hoping I can get some advice here. I've read so many forum, posts and reviews that I'm not entirely sure what I can trust.
I have an early 2011 MacBook Pro (MacBookPro8,3). I need to run Windows encrypted for work purposes. It needs to be real windows with full-disk encryption (FDE). The business tools run in boot camp, but not in Parallels, because Parallels doesn't support DirectX 11. I would also benefit greatly from an SSD.
I do not want to do anything hacky like removing the Mac reocovery partition, because I've read that just loading Disk Utility in OS X might mess up your patrition boot tables as it tries to "fix" things. I don't want to have to manually reocover to fix stuff or chance losing data.
I have read (and tried) installing BitLocker on Windows 7 Ultimate under boot camp, but ran into the partition limit on my internal HDD. A maximum of 4 partitions are allowed, and between OS X, its recovery, boot camp, and the Windows partition, all 4 are used.
I have considered one of the following, which may work:
Install OWC's Data Doubler Kit with an additional 240GB SSD (http://eshop.macsales.com/item/OWC/DDMBS6E240/). I would replace the internal SuperDrive with the HDD, and install the new SSD on the faster SATA 6G port. Windows would be installed on the SSD and OS X would stay on the HDD.
Replace the internal HDD with a new SSD (keeping the SuperDrive). I would lose OS X altogether and just have Windows installed.
Forget the entire thing and just buy a PC for work.
My thoughts are that with option both options #1 and #2, I don't even know if these setups will allow BitLocker. In both cases, Windows will be the only partition on the drive, so I'm assuming that when BitLocker is installed, there will be room for the new partition it creates. With option #1, I'm pretty sure I'd still be using Boot Camp, but how would that would for option #2? Is boot camp used even though there is no Mac partition? Would I still need to keey the Mac Recovery partition for this to work? I'd probably need to use Boot Camp drivers under Windows, I think.
I'd certainly be interested in using a self-encrypting drive (SED), especially a SSD, but I'm concerned that most of them appear to require TPM or BIOS functions that Mac's EFI does not provide. Such a drive would allow me to drop BitLocker, but I would need to be use the self-encryption actually works on this setup. From what I've read, most of the SED drives will work just fine under EFI, but you won't be able to set or access the encryption password, which pretty much makes these drives unencrypted.
I've read that BitLocker can be configured to use a flash drive as a decryption key, but I haven't been able to test that yet. I'm tried creating bootable flash drives under Windows and OS X, and none of them seem to appear when I access the boot menu (hold option during boot chime). I don't even know if this system supports bootable USB flash drives, or whether they can be used as a BitLocker key under boot camp.
For the record, I have attempted to use an external thunderbolt drive as my Windows partition, but Windows doesn't want to be installed on removable media, and even if it worked, I believe you can only boot OS X from thunderbolt. I do have a second OS X install booting from the thunderbolt drive, so I know that works. Also, FileVault 2 is installed on my OS X partition, and I read something about FV2 using the Recovery partition somehow so you can't remove the recovery partition to make room for BitLocker.
So ... does anyone have any suggestions preferably based on personal experience as to whether options #1 or #2 should work for my needs?
At this point, I'm really thinking I should just bite the bullet and purchase a PC that I will forever look down upon.

Are you using a MacBook Pro? Is everything installed on the same drive?
I would love to know how that install was performed. When I install Windows under boot camp, my MacBook Pro drive ends up with 4 partitions: Mac, Mac Recovery, Windows, and a small partition that I believe is used by boot camp.
Installing BitLocker on Windows requires the creation of a new small partition that Windows will boot off. The small partition is unencrypted, while the primary Windows partition will get encrypted. The following post discusses the maximum partition issue: https://discussions.apple.com/message/22753791#22753791
Has anyone installed Windows through boot camp on it's own drive, and if so, can BitLocker be installed on that without reaching any partition limit? I'm assuming that's possible, but would like to know before I spend hundreds on new hardware.

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id

There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons,

Why can't I just use my debit card for adding my child to family share?!

I want to use my child on family share but can't because I don't need or want a credit card, my bank has fraud protection, who actually just called me about fraud because I purchased the newest iPhone! I don't like credit cards. Why can't I just use my debit card as usual? Kids can get credit cards just as easily as they can debit cards! This is ridiculous. Why isn't there another option to verify I am the parent?! I am so beyond angry right now. Like I am being punished for not owning a credit card!! Otherwise there will be another way to do this. A person should have the freedom to use their chosen form of payment without missing out on all the options available. Honestly even if I wanted a credit card I haven't enough credit because of past mistakes. So this is not making me happy at all.

Mad Parent,
I feel your pain. We refuse to have credit cards, too; yet it's required in order to create a child's apple id. I will most definitely be leaving feedback with Apple. This is absolutely ridiculous that we can't just use our debit cards! Mine is a VISA. I use it to make CREDIT CARD transactions everywhere else, why not be able to use it the same way here!?
I just had to restore my sons phone because he forgot his 4-digit password and got it disabled. I didn't have it already on my itunes so my only option was to restore it. I wanted to create his own apple id so he didn't have to keep using mine. Because every time he downloads a new game it automatically ends up on MY device as well, not just his. Anyway, he needs his own apple id. But, apparently, that won't be happening until Apple gets their heads out of their butts and figures out how to serve ALL of their customers!
Signed,
Equally Mad Parent

All music gone, transferred to 'other', can't enable disk use on iTunes

it seems like there are a lot of people with similar problems but nothing exact..here goes:
-doing research on my macbook and i get a popup from itunes saying that my ipod was disconnected improperly (i didn't touch it and i wasn't even messing around on itunes)
-ipod restarts and reconnects with itunes and i get another pop up saying that "itunes cannot read the contents of the ipod. go to ipod summery and preferences and restore.
-i would just restore it and reload all the music butttttt like an idiot..i dont keep my music in my itunes cause it takes up way too much space and i never used any external hard drive or anything to back my music up (again..idiot..i know)
-so i read though a ton of forums and posts and see that im not the only one that this has happened to and everyone is saying to put it in disc mode, go to removable disk, copy all the music back to my macbook, restore my ipod, and put all the music back on. i also read something about clicking on my ipod icon on my desktop and going under ipod controls and changing some names (i dont konw if that was jsut for windows or what) but i also dont have an option of ipod controls
-the problem with that is that i can put my ipod into disk mode but that does me no good because i can't enable disk use on itunes because literally..my only option when i plug in my ipod is to restore it. under devices on the left hand menu, it just says ipod..not ipod with a bunch of sub categories like music and playlists and stuff..just ipod.
-normally..i would just give up and restore it but when i go to the about section on my actual ipod, it says that i have 50GB of "other" so that means that stuff is definitely still on it.
-so finally..my main question is:
is there ANY way to enable disk use on my iTunes without doing it through my iPod?..like i explained..when i plug my iPod in..that is not an option. and also..would i benefit from just bringing my laptop and ipod into an apple store and asking for help there or will that just be a waste of time?

The library on the iPod will have been damaged - hence the reason it appears empty, but the media files are still there taking up space and reported as "Other". Check out this post from Zevoneer for some iPod recovery options.
http://discussions.apple.com/thread.jspa?messageID=6273675&#6273675
Some of the tools mentioned will require a working library, but I know from experience that you can use the manual recovey method when the library is missing or damaged. If you're struggling for space you probably need to go & buy an external drive before you start. Stick the iPod in disk mode. Hold Menu+Select > 6 seconds (resets iPod) followed immediately by hold Previous & Select > 6 seconds. You can now drag the contents of iPod_Control\Music to your new hard drive. You may need to reveal hidden files & folders. Once they are on your hard drive you can create a new empty library on the drive, then import the files you have reovered and consolidate the imported library so that the files are in a standard artist\album\## track structure rather that the iPod's obscured names.
tt2

I got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does someone has a fix???

i got a macbook pro 2008 and can not back up using time machine. it eject my external hard drive everytime. does anybody has a fix???

Does your external hard drive have it's own power supply? It should.
Is your external hard drive formatted with the NTFS file system? It won't work.
It needs to be formatted either with Mac OS Extended or FAT32.
(There are drivers available to add NTFS support to OS X but their quality is unknown, especially the "free" ones.)

TS3276 I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

I'm now having trouble getting mac mail to work on my mac. The mobile me account works great on iphone and ipad but it won't connect to my mail account. Password is correct. What else can I do? Using OS10.68

HI,
The Apple IDs from @mac.com and @me.com (Older MobileMe and more recent iCloud Names) are also Valid AIM Screen names.
Any other sort of Apple ID is not a Valid AIM Name.
A Google ID that is associated with Google Mail Account (And has "Talk" enable on your Google Settings) can be used in iChat as Jabber Name/ID. (Google Run Jabber server).
Jabber and AIM are different IM Services and it is not easy or straight forward to add Buddies from one Service to the Buddy List of another. (As A Starting point consider it "impossible")
iChat 4 and 5 have links to the registration page of @Mac.com here with a "Get an iChat Account" button in the add (Account) screen (You select @mac.com or MobileMe and then press the Button - Choosing AIM and then pressing the button used to lead to the AIM registration page but AIM moved their page).
Apple IDs can be any valid email (or an @mac.com or iCloud registration)
Therefore you could make a Google ID into an Apple ID.
However this will not be a valid AIM Screen Name the way @mac.com or MobileMe/iCloud ones are.
Valid AIM Screen Names in Table (pic)
7:46 PM Monday; December 5, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Does anyone know how i can view PDF files using Galaxy Note 2?

Does anyone know how i can view PDF files using Galaxy Note 2?
This is what i have been doing;
I click on the file i wish to view (via a portal)
this file goes to notification widget (i drag down screen)
notification/message says download complete
i click on notification/message
nows it says complete action using (here i only have 2 icon options 1= DB Text Editor 2 = HTML Viewer)
I have installed Adobe Reader.

Can you confirm if the downloaded file is a pdf file, that is it ends with .pdf?

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker,

Since the iOS7.0.2 update to my iPhone 4S, I can no longer choose use of my Bluetooth device if using the power cord to listen to MUSIC or answer my phone (choice of powercord as 'dock,' speaker, & phone only). Was this former-feature now an oversight?? I'd really appreciate having my Bluetooth once again listed as a choice of audio option. Especially considering the battery life is not what it was prior to this update, and requires recharging often.

Sorry to tell you but unless you have a Retail Apple Store close by, they are the only ones I have found with all the adapters and accessories. I bought an extra lightning to usb adapter the other day to use in my truck. Good luck....

My iPhone 5s keeps randomly shutting off and restarting. It can either be in use or just sitting there and it will turn off. I can't figure out what is wrong.

My phone randomly shuts off. I will be in the middle of using it and it will completely turn off. I can also not have used it all night and I will pick it up and click the home button and then it will flash the apple restart screen. I'm not sure what is causing this as I have only had the phone for about two weeks. It's a little concerning and just wanted to see if anyone knew what it could be without me having to go into the Apple store.
Thanks!

Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
If the issue persists...
Connect to iTunes on the computer you usually Sync with and Restore
http://support.apple.com/kb/HT1414
Make sure you have the Latest Version of iTunes (v11) Installed on your computer
iTunes free download from www.itunes.com/download

Can't mount database using Oracle 8i on linux

I am not able to mount an Oracle database.
I am new to Oracle and am working on an Oracle8i installation on an
Intel Linux Suse 6.3 platform. I am using only one harddrive and am
not using the 4 mount points as mentioned for efficiecy purposes in
the Oracle documentation..I am using the installation cd from Oracle8i
for Linux Starter Kit by Oracle Press. If anyone has this book they
can refer to pages 41-44 for the examples I followed.
As sysdba in sqplplus using the STARTUP command I can not Mount the
database -step 2 of the 3 stage process (Start, Mount and Open the
database) of opening an Oracle database.
I show the errors I encountered when I did the first 2 of the 3 steps
in the step-by-step mode (STARTUP NOMOUNT pfile=, ALTER DATABASE
MOUNT) in the sqlplus session and alert log respectively with startup
nomount and alter database mount for this sqlplus session.
Additionally I show the init.ora file lines referring to control file
which seem to be referred to by the sqlplus error messages and the
alert.log file. Perhaps some can give me some advice as what I can try
to fix this problem.
At the end of this e-mail I added several questions I had in regard to the control
files. Any help is appreciated.
Well, here are the sqlplus session results and its alert.log file:
Oracle sqlplus session usr/oracle as sysdba
oracle@CHESTNUT:~ > sqlplus
SQL*Plus: Release 8.1.6.0.0 - Production on Mon Mar 19 20:47:49 2001
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter user-name: usr/oracle as sysdba
Connected to an idle instance.
SQL> startup nomount pfile=/usr/oracle/dbs/init.ora ;
ORACLE instance started.
Total System Global Area 24989680 bytes
Fixed Size 69616 bytes
Variable Size 24637440 bytes
Database Buffers 204800 bytes
Redo Buffers 77824 bytes
SQL> alter database mount ;
alter database mount
ERROR at line 1:
ORA-00205: error in identifying controlfile, check alert log for more
info
SQL> shutdown immediate ;
ORA-01507: database not mounted
ORACLE instance shut down.
SQL> exit
Disconnected
oracle@CHESTNUT:~ >
alert.log file for above session
Mon Mar 19 20:48:38 2001
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
LICENSE_MAX_USERS = 0
Starting up ORACLE RDBMS Version: 8.1.6.1.0.
System parameters with non-default values:
processes = 50
shared_pool_size = 3500000
control_files = ora_control1, ora_control2
db_block_buffers = 100
log_buffer = 32768
log_checkpoint_interval = 10000
db_files = 80
db_file_multiblock_read_count= 8
global_names = TRUE
db_name = DEFAULT
parallel_max_servers = 5
max_dump_file_size = 10240
PMON started with pid=2
Load Indicator not supported by OS !
DBW0 started with pid=3
LGWR started with pid=4
CKPT started with pid=5
SMON started with pid=6
RECO started with pid=7
Mon Mar 19 20:48:58 2001
alter database mount
Mon Mar 19 20:48:58 2001
ORA-00202: controlfile: 'ora_control1'
ORA-27037: unable to obtain file status
Linux Error: 2: No such file or directory
Additional information: 3
Mon Mar 19 20:49:01 2001
ORA-205 signalled during: alter database mount
Mon Mar 19 20:49:12 2001
Shutting down instance (immediate)
License high water mark = 1
Mon Mar 19 20:49:12 2001
ALTER DATABASE CLOSE NORMAL
ORA-1507 signalled during: ALTER DATABASE CLOSE NORMAL...
archiving is disabled
init.ora control files
# define two control files by default
control_files = (ora_control1, ora_control2)
Here are my control file questions:
I need to know several points:
1) What are control files susposed to
contain and how would I recognize them?
I used the
unix find /usr/oracle \*ctl* -print
command to locate files with a ctl extension.
This resulted in about a dozen such files in
different directories as shown below:
./bin/lsnrctl
./bin/extractlib
./bin/agtctl
./bin/oidctl
./bin/lsnrctl0
./bin/agtctlO
./rdbms/demo/ulcase1.ctl
./rdbms/demo/ulcase10.ctl
./rdbms/demo/ulcase2.ctl
./rdbms/demo/ulcase3.ctl
./rdbms/demo/ulcase4.ctl
./rdbms/demo/ulcase5.ctl
./rdbms/demo/ulcase6.ctl
./rdbms/demo/ulcase7.ctl
./rdbms/demo/ulcase8.ctl
./rdbms/demo/ulcase9.ctl
./ldap/load/dn.ctl
./ldap/load/attr_store.ctl
./ord/ts/demo/tsquick/tsquick.ctl
./ord/ts/demo/usageutl/utildat.ctl
./ord/ts/demo/usage/stockdat.ctl
./ord/ts/demo/usage/stockinc.ctl
./ord/ts/demo/retrofit/sales.ctl
./ord/ts/demo/retrofit/sales2.ctl
./ord/ts/demo/applet/indexdemo.ctl
./javavm/admin/libjox8com_sun_jndi_ldap_ctl.so
./md/demo/examples/migctl.h
./md/demo/examples/migctl.c
2) On page 100 in the book Oracle 8i A Beginners's
by Oracle Press mention is made of a
CREATE CONTROLFILE command that can under
circumstances be used to re-create a control-file.
but that is all that is said about it. Perhaps
you might know something more about it.
3) Would you recommend any good text for
Oracle DBA's, especially for the problem of the sort
that I am encountering?
null

<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by ():
I am not able to mount an Oracle database.<HR></BLOCKQUOTE>
Hi ()
My problem is accessing the database with sqlplus system/manager @oralin, on page 55 of the Linux starter kit. Do you notice the space here, between system/manager.. and.. @oralin. I think it needs to be there.
Is your database named Chestnut?
And for Startup, why are you using init.ora? the book mentions initoralin.ora on page 43.
Your configurations are different than recommended in the book. I'm not sure if any of this helps, but maybe you can help me. When I try sqlplus system/manager @oralin, the response is: can't connect to oralin.sql.
According to the book, I need to use @oralin at the end of the command in order to see if I have properly configured the server for MTS, a multithreaded server.
Any ideas? I hope I can help further.
gilles56

Can my Powermac G5 use a Hauppauge HDPVR?

Similar Messages

Maybe you are looking for