Can my tape be salvaged?

I shot some footage before some repair work was done on my video camera. I tried uploading the footage after I got the camera back (it's a Sony HDR-HC9) but haven't had much luck. When I play the tape, I can see part of it on the camera. Other parts can be seen only when fast forwarding or rewinding. FCP can't capture it. I've tried using different cables and importing to different hard drives, but without any luck. However, when I try importing footage from a different tape, I can capture. I'm assuming something's wrong with the tape itself. Does anyone have any suggestions on how to import the footage? By the way, I tried playing it on my daughter's video camera, which is an older standard Sony video camera but had no luck.
Message was edited by: Sunny's mommy

The mechanism that you place the tape into was replaced. In any event, I took the camera in to the Apple store and they weren't able to salvage anything, even with using imovie 9. However, they suggested going home and plugging the camera into the power brick because they've seen cases where the camera just needed a little bit of extra power to work. I don't know if that's what the project needed or if it was because I used imovie 6, but I was about to get back about half of the tape. Not the greatest, but at least it was something. I'm going to mark this as solved. But thanks to everyone's input.

Similar Messages

  • How can I change my old Apple ID? I have a new one created but can't deleted the old one it's gray and u can't tap on it?

    I'm able to use the new one even tho the old one is there? But can't delete the old one because it's frayed out n can't tap on it to change it to the new one

    You will need to use that old Apple ID and password to update any apps you purchased using that account. So you will either need to recover that Apple ID, which if you forgot the password you should be able to reset here:
    http://iforgot.apple.com
    or you will need to delete all those apps and repurchase them using your current Apple ID.
    Regards.

  • I just updated my 3gs to iOS5 and it keeps on saying cannot activate iphone.. after searching videos how to activate it.. i can't tap my three fingers because there is no clock showing on my screen. how do i go about it? help please.

    i just updated my 3gs to iOS5 and it keeps on saying cannot activate iphone.. after searching videos how to activate it.. i can't tap my three fingers because there is no clock showing on my screen. how do i go about it? help please.

    i have the exact same problem and im still currently trying to figure out how to activate it

  • I have a new MacBook Pro. I changed settings so I can just TAP on the computer, but on iPhoto I must press hard to drag mouse around. Anyway to change iPhoto to TAP?

    I have a new MacBook Pro. I changed settings so I can just TAP on the computer, but on iPhoto I must press hard to drag mouse around. Anyway to change iPhoto to TAP?

    Hugo999 wrote:
    For some reason I can't see Larry's last reply...
    That is an extremely agrevrating "feature" of the JIVE software that Apple choose to drive these discussion forums - and today it is especially bad
    LN

  • My ICloud icon on my 4s is gray so I can´t tap on it. I have an ICloud accont. What do I do?

    My ICloud icon on my 4s is gray so I can´t tap on it. I have an ICloud accont. What do I do?

    Turn off the Restriction to allow changes to Accounts in Settings > General > Restrictions

  • Why i can not tap on add account on my iphone setting?

    I already have two email account on my iphone which is yahoo and mobile me. I want to add more account on my iphone but i can not tap on the add account on my iphone setting. Could some one explain to me how to unable back the add account coloum on my iphone setting.

    Maybe you turned on restrictions to keep people from messing with the account settings? (This is a wise thing to do if you have MobileMe Find my iPhone set up).
    Go into Settings>General>Restrictions and check.

  • I'm in Safari, and can do a search,but the bottom half of my screen won't move and I can't tap on any of the results, it appears to be locked, what do I do to fix?

    I'm in Safari and the ribbon at the top is bright and I can do a search, but the remainder of the screen is highlighted and I can't move around in Safari or select a topic etc, it appears to be locked.  Does anyone know how to fix?

    Tap Settings / Safari. Clear the History, Cookies, & Cache.
    Restart your iPad.

  • HT5621 I changed my apple ID on my laptop and I can no longer sync calendars from my iphone4s to the Macbook.  I went to settings and when I open iCloud account settings, my old apple id is grayed out and I can't tap it to change it.  Any suggestions??

    I changed my apple ID on my Macbook  but I am unable to sync calendar from my iphone 4s.  When I go to settings in the phone, my old ID is there, but it is greyed out and I can't change it. I was able to change the app store ID, but the one in iCloud settings seems stuck.  Any suggestions??

    You need to use the old ID and password to delete the iCloud account. After you delete the old account, you can sign in with the new ID in iCloud.
    Have you seen this.
    http://support.apple.com/kb/HT5796
    iCloud
    iOS 6 and later: Go to Settings > iCloud.
    If you signed out before changing your Apple ID, enter your current Apple ID to sign in. The data from your iCloud account will download to your device.
    If you're still signed in with your previous Apple ID:
    Scroll down and tap Delete Account. Depending on what iCloud options are turned on, you'll be asked to confirm that you want to delete data from your device. To confirm, tap Delete. (If you're using iOS 7 and have Find My iPhone turned on, you'll be asked to enter the password for your previous Apple ID. Enter the password, then tap Turn Off.) The data will be deleted from your device, but not from iCloud.
    Enter your current Apple ID to sign in. The data from your iCloud account will download again to your device.

  • Unable to update my app. I can't tap in my Apple ID doesn't let me only password

    I am trying to update my app after I updated latest update of X Yosemite and now I am not able to update anything as when I want to tap in Apple ID it doesn't let me only password I can see the example apple ID but I can't write over it or not event to tap on it. Why is that or how can I fix it. I tried to resent my password but I did it 2 times and still no progress. Thanks

    Each application has the Apple ID used to download it stored inside it. This can’t be removed without deleting and redownloading it.
    (123829)

  • Can't tap on Camera Roll in Photos

    Camera Roll is hidden and can not be tapped on to access.
    Even trying to scroll it down to touch - it still just bounces back up under the Albums gray area and can not be tapped on.
    The only way I can access the Camera Roll is in the Camera app.
    Does anyone know how to fix this?

    Did a search and found similar problem in "More Like This" right sidebar.
    Double Tapped Home button to show recently opened apps;
    Held Home button down to activate the RED minus buttons on each app;
    Tapped on the Red minus button on the Photos app to quit it;
    Reopened Photos app and the problem was gone.

  • How can I tap into the yellow diskette icon?

    FORMS Builder 10.1.2.0.2
    I have a data block that is updateable / save using F12 or by clicking the yellow diskette (save) icon. However, is there a way I can tap into that? What I mean is, I would like to Insert into table2_log(with details - date, who on the update) when I click save or F12 in addition to updating table2.

    Thanks for your suggestion, MLBrown.
    I created POST-UPDATE trigger on the the data block and it works as well.

  • Can't tap links on web pages... Help please!!!

    This problem only started about 3 weeks ago, after having my phone for about a month.. After browsing on safari for a little while, I will load a page and all of a sudden it will not allow me to 'click' any of the links. I can still scroll up and down and zoom in and out but cannot tap links. The only thing that works is to power off and on my phone. Any thoughts? Thanks!
    P.S. My phone just quit safari and went back to the main screen, just like what is talked about in a post below... And I am typing like a word a min thanks to the keyboard lag... Also talked about in another post!

    Hi - I just had the can't click problem the other day. I powered down the phone, and when it restarted all was fine. Sounds like the same problem. It started when I visited a certain site that wanted and tried to download flash to the iPhone (hah). I haven't gone back there to try to duplicate the problem. Can you attribute your problem to anything?
    The Safari quitting is/was a known problem.
    Now - I also just upgraded to 1.1.2, and that is supposed to fix the Safari crashing. I'm not sure about the other two since this is the first reference I have seen to them. What version are you running on yours?

  • Can you tape a basketball game with the ipad

    I want to tape a basketball game, can I use the ipad or do I need a special app

    The app you use to view the game would need to provide recording capability. Most likely you'll need to do this on a computer where you can capture the screen, unless you're willing to just use a video camera to film your iPad's screen.
    Regards.

  • Can someone tap into video onli

    Can someone, if they know enough about the technology, tap into a video that is being sent through a Web cam? Can web cam video be captured by the receiver to use and play back later?

    Hi,
    It is possible and I have heard of one or two Trojan (malicious programs) software that can activate a persons webcam without their knowledge. Any up to date spyware/anti virus program will be able to spot these application. To intercept a webcam video while streaming over the internet would be technically very difficult. It would be far easier for a party to hide their own wireless camera(s) in the area and therefore not rely on the PC being on and the installed webcam operating.
    Hope this helps,
    John

  • I am trying to download whatsapp on my iphone 4  when I hit the redeem button it shows I have $14.73 in my account, but asks for a code.  I tried my itunes card code but it says it was already used. How can I tap into my account to pay for the app?

    I am trying to download whatsapp on my iphone 4.  It asks for my apple id and password and when I sign in , it gets me to a page that says redeem ...when I hit redeem it shows I have a $14 balance in my account and asks for a code  -  I tried entering the itunes card number...it says it has already been used.  How do I tap into my account to pay for the app? 

    It says   at the top      under Redeem after I touched that:
              $14.73
    Account: [email protected]   (my account name)
    Enter your Gift Card or Download Coad

Maybe you are looking for

  • How do I determine what Cert Template is used by a Cert?

    Hi, The objective here is to understand what Certificate templates are used to issue certificates. We have a 2003 Sub Issuing CA which issues Certs to servers.  Im thinking the best way to see what template was used to issue this Cert is to go the De

  • Quake live connection error

    Hi fellow archers, I have a problem with quake live (www.quakelive.com). When I login, the plugin loads and then I get a connection error. We're sorry, but it appears you are having problems connecting to the QUAKE LIVE network. If you are behind a f

  • Image across 2 page spread?

    Is it possible to get an image to spread across 2 pages wide without having to split it in half manually and import two seperate images? I can not for the life of my find any way to do this thanks for any tips

  • How can I scroll through my playlists under "music" when synching my phone?  Using a mac book air and can't scroll.

    I keep synching my phone to remove playlists and I can't scroll through my options under "music" in the synch.  I actually can't scroll through the landing page fro synch either.  Is there something special I need to be doing?

  • Why does he search in the user settings for the printer?

    Hi, I created a smartform and added output and control options when the form is called. I read that if I assign tddest and tdprinter, and leave user_settings blank, that SAP would not go to the user settings to see if a standard printer was declared.