Can Navigational attributes be used to create aggregates ?

Can Navigational Attributes be used to create aggregates?

Ok. But I am following 'SAP BW A step by step guide by Fu and Fu' (refers 3.5 version of BW ) which states otherwise. Its using the following example.
1. 3 infoobjects defined for Sales Rep, Sales Region, Sales Office.
2. Sales Region and Sales Office are defined as navigational attributes.All 3 are under the same dimension
3. Then its in the book that as Sales Region and Sales Office are hidden inside the Sales Rep Characteristic, we cannot build aggregates on Sales Region and Sales Office.
Is it something to do the way Cube is modelled. Or is just that Navigational Attributes can be used to build aggregates.

Similar Messages

HT201301 Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?

Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?(Have Windows and Mac on same computer)

Since you posted this in the iPod Touch forum and didn't provide enough information to contradict that I am going to say the it can't be done. VMWare does work in iPods.
Allan

Can 10G express be used to create an application for use with a 10G instanc

Hi
Can 10G express be used to create an application for use with a 10G instance? I am new to Oracle 10G. I like the interface for creating applications, maintaining users, etc. Can this tool be pointed at a regular instance of 10G so that applications can be created against a regular 10G database not the express database?
Can PL/SQL proceedures that are created in 10G express also be migrated to a 10G database?
Thanks in advance
Dean-O

Can 10G express be used to create an application for use with a 10G instance?Yeah, that's the whole point from a marketing perspective ;)
Can this tool be pointed at a regular instance of 10G so that applications can be
created against a regular 10G database not the express database?Yes but it's a different version. Check out:
http://www.oracle.com/technology/products/database/application_express/index.html
Can PL/SQL proceedures that are created in 10G express also be migrated to a 10G database?Yes they can!
~Jer

Can Adobe Muse be used to create database driven websites?

Can Adobe Muse be used to create database driven websites, or is it only through "replace image through browse from your computer".

Hi Edgard,
I am afraid that this is not possible in Muse at this stage, I will recommend that you post this on our ideas section over here, Ideas for features in Adobe Muse, and let our devs team know of this requirement.
In muse you can only design static content. For any dynamic content that you need to render via DB, you will need to write custom code and insert it in Muse via 'object -> insert html' option or 'properties -> metadata -> html for head' option.
- Abhishek Maurya

Need help to find out the navigational attribute where used list ?

HI all ,
i have a 0BATCH_0PLANT navigational attribute , i want to find out , where it has been used in the all the queries .
Thanks ,

Nav-attribute will also be see as a attribute in the system search for it and click on where used list of it.
Search for the Info object 0BATCH_0PLANT. double click on it -- click on the where used list of the nav-attribute.
It will display all the dependent objects where its used.
With this you can get the IC,DSO,MP names where this object is used. next with the help of those MP,IC and DSO you can get the list of queries.

Can the AET be used to create a new Z table?.

I understand that new user tables can be created/changed via EEWB, but, I keep reading that in CRM 7 we should now be using the AET tool. Can I create a new user table in AET, and if so, how?.
I only know of one way to launch the AET via the WebUI, and that's via the screen configuration tool. Of course this method would only allow us to ammend an existing structure/table and not create a new one, hence my question.
Anyone.
Jason

As far as I know EEWB never supported Z-tables except for those related to the SAP Business Partner. It's always been next to impossible to use the EEWB to add Z-tables for the business transaction model.
Jason can you please back your rant with some examples what the EEWB did with Z-tables that is not supported by the AET, for specific business object types. EEWB was never used to create stand alone z-tables. Also technically the EEWB was a big failure because it never supported currency and quantity type fields, so you could never automate your work.
I'm just little concerned that if you don't clarify your statement about the EEWB you are going to confuse people who read this thread in the future.
On another note the new tools available in EHP1 for enhancements are great and not hard to figure out. They definitely fill some needed gaps. Now just don't get me started about EHP1 not being in GA.
Take care,
Stephen

Can a selection be used to create an arc without clipping art to the selection size?

I need to arc a rectangular shaped piece of art into an arc.
The art has bleed which can't be calculated into the arc, but needs to remain as a bleed. (Just like a clipping path obscures the view of the extraneous art, yet it's still there)
Is there a way to tell Illustrator to designate a selection to use as the starting area…and then arc it into a shape…without first eliminating the art/photo/type hanging off into the bleed?
In the following example, the orange rectangle is the area of the art I need to warp into the shape of the arc laying on top…yet I need the bleed to remain.
[IMG]http://i69.photobucket.com/albums/i53/Bug_Nuts/Adobe%20Illustrator%20Forum/Screenshot.png[ /IMG]

Katrina,
The question is how can I make illustrator take this
art...and warp it...making the area that equivalent to the yellow trim
box fit to the warp shape...YET...keep the bleed...and warp evenly.
No, unfortunately not: different shapes are warped quite differently.
My
experience has been that because of the irregular things hanging off
the sides, illustrator uses those when it calculates the arc. I need it
to calculate the warp of this art using the yellow box as "from"...and
the warp shape as "to".
To get things to work properly, you can only apply one warp, and the obvious choice is to get everything inside (by getting rid of outlying parts, hence the Clipping Mask with subsequent snipping off) and then inflate the photograph part and get it as nice and even as possible; this has been the basis for the instructions below.
Referring to the AI file (see bold type) and an amended version of post #17 (I can see that both the photograph(s) and the vector artwork are to be clipped):
If you have some vector/raster artwork (this is the cat and the circles) within a rectangle (this is the upper, smaller rectangle) and a woody photograph in the background (I can see that the woody photograph to have bleed is only in the right side), all of which are supposed to be warped using Arc, so that the warped woody photograph extends past the vector artwork to also function as a bleed (the bleed seems to be 18pt, corresponding to the lower, larger rectangle), the bounding rectangle of the vector/raster artwork forming the basis of the Arc, and if you are willing to adjust the woody photograph which may have a slight distortion and live with a non constant bleed, you may:
1) Copy the rectangle (this is the upper path in the first Group), to get a top rectangle and a bottom rectangle (the bottom rectangle replaces the lower path in the second Group which cannot be used here, step 6) is to create a path that can do it);
2) Select the top rectangle and the underlying vector/raster artwork, Group them, and reduce the opacity to 50% (so you can see the woody photograph beneath;
3) Copy the bottom rectangle to the front, to get a middle rectangle;
4) Copy the middle rectangle to the front to and Object>Path>Average, to get an supplementary middle rectangle with W = H = 0;
5) Select 3) and 4) and Object>Compound Path>Make, to get a middle compound path;
6) Scale the bottom rectangle up by a suitable amount, possibly 1.1 times for W and 1.2 times for H so that it covers the desired part of the photograph including the bleed (see more later);
7) Select the scaled bottom rectangle and the underlying photograph and Object>Clipping Mask>Make;
Now   you need to get rid of the outlying parts of the woody photograph (copy before these destructive steps and hide the original set):
8) In the Transparency palette/panel dropdown, click Multiply (or just anything but Normal);
9) Object>Flatten Transparency (just keep the defaults, especially if you have vector artwork along with the image(s));
Now you need to resize the Clipping Mask to match the rectangle/artwork Group:
10)   Scale the Clipping Mask down by the reverse amount of that in 6) (1.1   times for W and 1.2 times for H) so that it has the same size as the rectangle/artwork Group, but with the woody photograph compressed;
The main shaping step:
11) Select everything and Effect>Warp>Arc (this will give the top rectangle the Arc shape, and everything else will be warped correspondingly);
Creating/shaping the woody photgraph/bleed along with the middle compound path:
12)    Select the Clipping Mask and the middle compound path (easy to do by clicking it in the Layers palette/panel), then Object>Expand Appearance, then
12a) Click the uppermost Anchor Point (which corresponds to the inner W = H = 0 path of the middle compound path, and its says Anchor, if you have Smart Guides on), to set a more correct centre for scaling and thereby reduce the additional distortion of the photograph, and then
12b) DoubleClick the Scale Tool and scale up by the same amount as in 6) (1.1 times for W and 1.2 times for H).
Placing the woody photograph:
8)   Move the woody photograph vertically until the bleed is roughly equal on all sides and the photograph is placed correctly behind the   artwork/rectangle Group;
You may need to redo some of the steps to adjust and get them right. In this process, you may move the supplementary middle rectangle 4) upwards before creating the compound path to further reduce the additional distortion of the woody photograph.
When things are right (if they will ever be):
9) Increase the opacity of the artwork/rectangle Group to 100%.
Final note: I believe the exact distortion of the woody photograph is less crucial than it would have been for the cat.

Can one Datafile be used to create 2 tablespaces

Can i use one datafile to create 2 tablespace.
Acutally i am creating new tablespace , i want to use existing datafile already used by one tablespace, but it almost empty..
Need suggestions?

Data file is phisical and tablespace is logical. A tablespace can have one or more data files but one datafile can be part of single tablespace only.
In your case the existing tablespace can be resized and with that space you can create a new tablespace with a new datafile

How can premiere elements be used to create an 80 minute 720p hd video?

I'd like to use Premiere Elements to create a couple 80 minute hd videos that employs image stabilization filters, but I don't know techniques for easily making such large files. Premiere Elements is supposed to be a very stable program, but I have doubts as to whether it will do what I want. Can the blu-ray burning segment of this program reassemable small files into a single blu-ray disc that plays as if it were a single file; or is this even the way to approach this problem?

Welcome to the forum.
Depending on the specs. of your computer, and on the specs. of the HD files that you Import, then yes - that is what PrE does - edit video.
Can you give us the specs. of the files that you will be using? Just knowing which make/model of camera, and its settings, will be very useful.
Then, can you give us the specs. of your computer?
You will want to choose a Project Preset (at New Project), that matches your Source Footage (the files to be Imported) 100%. When you Import those Source Files, and drag them to the Timeline, you will have no red lines above them, until you add Stabilization, or other Effects, or overlays, such as Titles, PiP (Picture in Picture) or Transitions. Then, you will probably want to hit Enter/Return, to Render the Timeline, for smoothest playback.
When done with the editing, just go to Create Menus, and add a BD (Blue-ray Disc) Menu Set, Chapter Markers, Menu Markers, etc., and go to Share, choosing Blu-ray Disc.
Good luck, and happy editing,
Hunt

Can Expression Design be used to create whole website pages???

I have been looking at Design and dont know how to use it, and the help is of no help. Can Design be used to build whole web pages???
Thanks, in advance!

No.
Expression Design is a vector art graphics design program.
Expression Web is a professional-level web site design tool.
A horse walks into a bar. The bartender asks "Why the long face?" "Because I was born into servitude and when I die my hooves will be used to make glue." It was at this point that the bartender realized he would not be getting a tip.

Can Adobe edge be used for creating a short animation in an eBay description

I am writing a description in Adobe Dreamweaver for my eBay auctions and wish to add a short edge animation. would this breach Ebay policies as I know they do not like JavaScript in the descriptions or is it converted to HTML5?
Thanks for the advice
Gordon

Hi,
No I don't think this will work. Edge requires 3 external javascript files minimum to run the stage composition in HTML. I'm not sure if eBay allows you to add external javascript.
I hope this helps.

Disadvantage of having Navigational Attributes

Hi there,
Pl. clarify the disadvantage of having a navigational attributes instead of low performance.
Regards
Sridevi

If a navigation attribute is used in an aggregate, the aggregate has to be adjusted using a change run as soon as new values are loaded for the navigation attribute (when master data for the characteristic belonging to the navigation attribute is loaded).
This change run is usually one of the processes critical to the system performance of a productive BI system.
This is why avoiding using navigation attributes, or not using navigation attributes in aggregates, you can improve the performance of this process. On the other hand, not using navigation attributes in aggregates can lead to poor query response times. The data modeler needs to find the right balance
Regards,
Sergio

Use of navigation attributes in APO DP

I am trying to clarify how navigation attributes compare with full planning characteristics in APO DP (V5).
In general, I know that navigation attributes are used for selection and navigation in APO DP.
But suppose I have a navigation attribute called 'product type' for planning characteristic 'product'. Isn't it also possible to forecast and make adjustments at the 'product type' level.
If the answer is yes, what is the real difference between the use of navigation attributes and planning characteristics?
Thanks for any help with this.
Bob Austin

You do not see difference in Attribute and characteristics in the interactive planning screen. So you should be able to create selections and do general navigation
just a little more detail on the difference between nav attributes and planning char
But creating forecast profiles might be a problem- Selections with navigational attributes do not create forecast assignment table entries. As of SCM4.1, the attribute information can be stripped out of the selection via BADI, allowing an assignment entry to be created.
Maintenance of CVCs also have to be done differently. Navigational attributes are not same as CVCs. Instead they point at the value of another characteristic. We create master data for nav attrib in the Admin workbench. Also If you plan to use navigational attributes on standard characteristics, say in 9AMATNR, then you could have issues in SNP since SNP does not support Nav attrib
Also realignment of Navigational attributes is not a standard process but can be done.

How to use Navigational attributes in BEx

Hi experts,
I have searched many threads regarding navigational attributes in BEX.
But unable to find any info.
How the navigational attributes are used in BEx query designer.
What is the difference between characteristics and Nav attr in Query designer.
Every one n saying Nav attr are used for drill down purpose.
What exactly is this drill down .
Please send me any related documents also.
Please answer me.
Thanks in advance
Sundar

Hi,
Characteristic attributes can be converted into navigation attributes. They can be selected in the query in exactly the same way as the characteristics for an InfoCube. In this case, a new edge/dimension is added to the InfoCube. During the data selection for the query, the data manager connects the InfoProvider and the master data table (u2018joinu2019) in order to fill the Query.
Navigational attribute is like any other master data attribute except that we can navigate (filter, drill down and selection) in reports on this characteristic.
Drilldown means after you executed the query , you want to see further detailed data with particular combination ,
in that case you navigate further or do restiction that is drilldown.
If you restict a navigational attribute in Query , then it behaves like a normal characteristic and not as a navigation attribute.
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a63e7e07211d2acb80000e829fbfe/content.htm
Also check the link:
http://help.sap.com/saphelp_nw70/helpdata/en/43/f234619e3c4c5de10000000a155369/frameset.htm
Regards,
Amit

Issue when using Navigation attributes for filtering in BEX

Hello,
We are encountering an issue when applying filter on Navigation attributes in BEx query built on top of a BW HANA Virtual Provider.
The interface is as below :
HANA Calculation View -> SAP BW 7.4 Virtual InfoCube -> Multiprovider -> BEx Query.
We have directly mapped the base Infoobject from HANA View to BW Virtual Provider and using this in BEx query free characteristics. We also have used the navigational attribute of this Infoobject in our Report variable screen as well as an Auth relevant object.
Eg if ZMATERIAL is the base infoobject and ZMATERIAL__ZXYZ navigational attribute is used in the report variable screen and as Authorization variable.
This is causing the query to fail.
The query also fails if I apply any filter values on any Navigational attribute with error message :
"Termination message sent ERROR DBMAN (305): Error reading the data of InfoProvider"
Using the navigational attribute with authorization variable fails with below :
"Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute ZMATERIAL__ZXYZ [...]"
Appreciate any inputs on this issue and how this can be fixed.
Thanks,
Tintu

Hi Andrey,
Thank you for your input.
Based on the OSS note , it says to import BW7.4 SP7. We are already on BW7.4 SP7
We get error "Termination message sent ERROR DBMAN (099): Invalid query;Failed to find attribute
ZMATERIAL__ZXYZ" whenever we try to apply filters on any of the navigational attribute.
Thanks,
Tintu

Can Navigational attributes be used to create aggregates ?

Similar Messages

Maybe you are looking for