Can ni-daq 6.9.3 nbe used with labview 4

can ni-daq 6.9.3 nbe used with labview 4

Greetings,
The earliest version of LabVIEW supported by NI-DAQ 6.9.3 is LabVIEW
5.0. The newest version of NI-DAQ to support LabVIEW 4 is NI-DAQ 6.6.
So, you will either have to upgrade LabVIEW or use NI-DAQ 6.6. You
can download NI-DAQ 6.6 from the link below.
NI-DAQ Driver Downloads
http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C1293?opendocument&node=132070_US
I hope this helps.
Regards,
Todd D.
NI Applications Engineer

Similar Messages

  • Can Adobe Photoshop Elements 5.0 be used with Windows 8?

    Can Adobe Photoshop Elements 5.0 be used with Windows 8?

    Hi,
    As far as i can tell pse 5 does work on windows 8, but after installing you need to apply the 5.02 update.
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=3569
    Since you posted in the forum for beginners help with the full version of photoshop, you might post over on the photoshop elements forum:
    http://forums.adobe.com/community/photoshop_elements

  • Can an older IPod (click wheel) be used with a wireless/bluetooth speaker? If so, how?

    Can an older IPod (click wheel) be used with a wireless/bluetooth speaker? If so, how?

    There is no doubt you can.
    When you say photos stored on it.. in what form are these photos?? Is this your iphoto library?
    If so using iphoto library on the TC has risks.. not necessarily viewing photos .. that should be fine. But if you have photos you are editing and wireless comms drop out leaving the library with a file open, it is likely to corrupt your library. Please check with the iphoto people on the discussion board if you want to go ahead for the dangers of using iphoto on any network drive.
    The TC is not designed as a NAS .. in particular it cannot back itself up, nor can Time Machine backup the TC. So any files on the TC are at risk. If you manage to corrupt the iphoto library without a current backup... does that worry you??

  • Can a Dell Photo 926 printer be used with a Macbook?

    Can a Dell Photo 926 printer be used with a Macbook?

    Ask Dell for the driver, or check here:
    Printer and Scanner software available for download:
    http://support.apple.com/kb/HT3669?viewlocale=en_US

  • Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?

    Can the Canon Pixma iP 5000 be used with Mac OS X Version 10.5.8 ?    Thank you

    Mail updates are usually part of OSX System Updates and no stand-alone updates.
    Try downloading and installing the 10.6.8 Combo Updater from here http://support.apple.com/kb/DL1399
    Stefan

  • I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

    I need to connect a Micro SD Card to my MacBook (10.6.8) 2011 so I can switch my Magellan RoadMate GPS for use with the new Mac Content Manager from Magellan. Can I do this? from

    Hi Robert and welcome to Apple Discussions,
    There are adapters available that convert micro cards into fullsize ones.
    You will also need a USB card reader if you do not have one.
    Good luck,
    Alan

  • Can the iSight built in camera be used with msn messenger?

    if so. how can i make it work?!?!

    Hello jellosaladE
    can the iSight built in camera be used with msn messenger?
    An iNtel Mac can use its built-in iSight "with" MSN Messenger.
    For how, see this thread:
      http://discussions.apple.com/thread.jspa?messageID=5087786&#5087786
    (Also at your other post of this same question:
      http://discussions.apple.com/thread.jspa?threadID=1134579)
    EZ Jim
    PowerBook 1.67 GHz   Mac OS X (10.4.10)    G5 DP 1.8  External iSight

  • Can the Gigabit Ethernet LAN Port be used with a Thunderbolt to Gigabit Ethernet adaptor and then to a Thunderbolt Hard Drive as a back up drive?

    Can the Gigabit Ethernet LAN Port be used with a Thunderbolt to Gigabit Ethernet adaptor and then to a Thunderbolt Hard Drive as a back up drive?

    If you use ethernet to connect the two AirPort Extremes together, you'll have Gigabit speeds available at all of the ethernet ports on both routers.
    If you connect the second AirPort Extreme using wireless only and configure the Extreme to "extend a wireless network", then the maximum speeds that the second router can attain will be limited to the capability of the wireless connection. So, if you connect at normal "n" wireless speeds of say 130 Mbps, that will be the maximum speed available at the ethernet ports on the second AirPort Extreme.
    I think you can easily see the difference between Gigabit ethernet, which is 1000 Mbps compared to "n" wireless at 130 Mbps. Even if you can manage to connect at 5 GHz speeds for wireless, the max speed will be in the 300 Mbps range, more than 3 times slower than Gigabit ethernet. Normal "n" speeds will be about 7 times slower than ethernet.
    For streaming high definition video and other demanding sources, you'll need as much bandwidth (speed) as you can get. Ethernet is always the best choice if you can possibly use it. And...there's no wireless interference on an ethernet connection.
    Message was edited by: Bob Timmons

  • Can iPad 2 model MC775LL/A be used with Verizon?

    Can iPad 2 model MC775LL/A be used with Verizon?

    Nope......AT&T and Verizon do not use the same LTE technology. 

  • Poll - Which Version Control Software Do You Use With LabVIEW?

    I wish the forums had a poll feature. I created a poll in the developer community - Which Version Control Software Do You Use With LabVIEW?
    http://decibel.ni.com/content/polls/1818
    Edit: I just saw that there already is a poll for that
    http://decibel.ni.com/content/polls/1050
    =====================
    LabVIEW 2012

    julieann wrote:
    You can use a source control provider to share files among multiple users, improve security and quality, and track changes to shared projects. Use LabVIEW with third-party source control providers so you can check out files and track changes from within LabVIEW. See info. here.
    Looks suspiciously like someone trying to increase hits on their blog. A coincidence that it was posted the same day as the blog post?
    Message has been reported to the moderator. Laura can decide whether or not it's appropriate.

  • Can i download google map and then interface with labview?

    i intend to interface labview with google map and indicate my required position on it.i need help on how to accomplish this?can i download google map and then interface with labview?

    Hi,
         The Example avalable on following link (C:\Program Files\National Instruments\LabVIEW 2009\examples\comm\axevent.llb\ActiveX Event Callback for IE.vi) on your PC, and using of Googlr map API u can indicate your position.document are avalable on following link (http://code.google.com/apis/maps/documentation/staticmaps/)
    I hope this is help for u..
    Siva
    Sivaraj M.S
    CLD

  • Who can i make a set-reset flip-flop with labview interacting with for cycle outputs

    Who can i make a set-reset flip-flop with labview interacting with for cycle outputs

    Are you wanting a VI that emulates a RS filp flop, or do you have a question about using an actual one?
    You can make a RS flip flop by knowing the 4 states:
    R=0, S=0, Q=no change
    R=0, S=1, Q=1
    R=1, S=0, Q=0
    R=1, S=1, Q=?(invalid condition)
    I have attached a RS flip flop VI in LV version 6.0
    dhuff
    Attachments:
    RS_Flip_Flop.vi ‏34 KB

  • What is the newest version of NI DAQ i can use with LABVIEW 5.0

    Can Labview 5.0 be used with NI DAQ 6.8.9.
    The Cards I am using are IMAQ PCI 1411, 6013 and PCI DIO 96. Should this combination work together ?

    The most recent version of hte NI IMAQ software is version 2.5.5. You may want to replace version 2.2 with that and see if it helps. This link will take you to the download page.
    J.R. Allen

  • I would like to know: what sort of DAQ card, I have to use with LabWindows, to have datas from 3 sensors?

    If you have some references or internet sites, please, answer me.
    A French guy.

    Most any of National Instrument's DAQ boards will do this. We provide a tool to help you pick which DAQ card is best for your application called DAQ Designer. You can access DAQ Designer online at: http://www.ni.com/daq/ddonline.htm.
    Best Regards,
    Chris Matthews
    Measurement Studio Support Manager

  • Can you configure a static port to use with certsrv.msc?

    I am trying to use certsrv.msc to connect from my workstation to the CA for administration purposes.  Workstation is Win7, CA is 2008 R2 Enterprise running Enterprise Subordinate on a dedicated box.
    I configured a static DCOM port for certsvc by following this article, including bouncing the service and also rebooting the CA box:
    http://social.technet.microsoft.com/wiki/contents/articles/1559.how-to-configure-a-static-dcom-port-for-ad-cs.aspx
    The static port was opened in the firewall from my workstation to the CA.  We also found that TCP 445 was required, so that has been opened as well, port 135 & other ports normally needed for autoenrollment should be open.  Sniffing the firewall
    showed that a random high numbered port that is not the static dcom port is being attempted - this is the only port showing dropped packets & no traffic on the static port.
    I am wondering if there is a way to configure a static port for this high-level random port to use with certsrv.msc as I was able to do with the certsvc dcom port?  I am trying to avoid having tens of thousands of network ports wide open going to my
    CA...  Thanks in advance!

    Hi Steve,
    I am sorry that I wasn’t able to find references about restricting certificate services only use one port in the random port range.
    However, we can configure RPC dynamic ports allocation to restrict port range. In the meantime, we should keep at least 100 ports open to keep necessary system services running.
    More information for you:
    How to configure RPC dynamic port allocation to work with firewalls
    http://support.microsoft.com/kb/154596/en-us
    Service overview and network port requirements for Windows
    http://support.microsoft.com/kb/832017/en-au
    Firewall Rules for Active Directory Certificate Services
    http://blogs.technet.com/b/pki/archive/2010/06/25/firewall-roles-for-active-directory-certificate-services.aspx
    Best Regards,
    Amy Wang

Maybe you are looking for

  • Error while creating transformation from DSO to InfoCube

    Hi Gurus,    When i am creating tranformation from DSO to InfoCube getting an error,        " The unit/currency 'Source Currency 0CURRENCY ' with the value 'space' is  assigned to the key figure 'Source Key Fig. ZAMT_PLC ' with the value    '8.50 ' "

  • Adobe Media Encoder ruins the quality of mi video

    Hello, I have a motion graphics video made in After Effects, I've rendered PNGs and import them to AE again to add final touches and when I render ir with AME with the Android Tablet 720p preset and  it always make a specific section look terrible pi

  • IPhoto Image Properties

    Im totally confused about image properties and the effect on images when downloaded into iPhoto of different releases: I have Canon digital camera. I always shoot at max image and file size...not Raw. I had my MacBook on a vacation in Europe and pull

  • Artwork in Itunes music library but not on my Ipod

    Only got my Ipod at the weekend so don't know if I'm doing something wrong but I've enabled the option for album artwork and click on get artwork for each album I have transferred into my library. The artwork appears in my library but on my Ipod many

  • Calling Customer code in java application

    Hi, in my java application running on WAS 6.40 I want to call some customer code. Basically I create a data structure (DOM XML tree) and want to pass this to customer code to be able to modify it as needed. My idea would be to define an interface whi