Can no longer access Netgear Router

We have been using a Netgear MR 314 router for years for both Wireless and Ethernet wired activity on our G4, G5 and MacBooks. We recently upgraded to Safari 4.0.1 on all 3 machines. Internet, file sharing, screen sharing, home networking all work just fine.
What mystifies me is that I can no longer access router data (192.168.0.1 + password) to do whatever on any of the machines with Safari 4.0.1. I click the tabs on the router (Wizard, Advanced, Maintenance) and nothing happens beyond the 'Welcome' screen. In order to get access to the router I have to use a Dell XP machine. Then I can get into the router with no problem. It's not a big deal, but any ideas?
Yes, yes - all of the MAC ID's for all computers and wireless adapters are still in the router configuration table as tested today with the Dell. So, again, any ideas ??
Thanks

From what you describe, it seems that Netgear deliberately chose to make their web-based management system for their routers focused on Windoze and it's browsers, so either they're using non-compliant HTML, or they're browser sniffing and rejecting anything that isn't IE or Firefox on Windoze. You should complaint to them and let them know how upset you are. There's really no excuse for that, especially since they don't disclose it prior to or after you buy it, and it just shows how lazy they really are when designing these systems.
You should open Safari's Preferences>Advanced window and enable the Debug menu, then go to that menu on the menu bar and use the User Agent sub-menu to select a different browser (Firefox for Windoze) and see if that will give you access again.

Similar Messages

  • WRT54G2 - can no longer access router webpage after changing setting

    hello i've started gaming again so i ended up configuring a static IP using the network and sharing centre in the control panel and i'm online with the fixed IP, and i had some ports forwarded in my router web page and everything has been working great the past 2 days. however, earlier this morning i could not join any games all of  a sudden even tho i played 1 when i just got up, so i went to my router home page and changed a setting, i'll link a screen shot, i'm pretty sure i just changed the local IP address from 192.168.1.1 to 192.168.1.10 (which is what i set it as 2 days ago in the control panel network tcp ip4 thing)  it's possible i modified somethin in the dchp server section but i was nearly convinced that was disabled anyways. http://screenshots.portforward.com/routers/Linksys/WRT54G2/Basic_Setup.htm is the link if it helps
    anyways like the thread title says, i can no longer access the router web page which was 192.168.1.1, instead all i see is a sickening  image about something called internet information services!? talk about a weird thing to see when i expected to see my router web page. but it's related to microsoft so it's not malacious at least. any ideas on how i fked up so bad and how to fix it, so i can see the router web page again, and edit the settings back to the way it was this morning

    I can't access either and c ant get a connection plugging in my laptop I got a new modem and I'm trying to configure my modem to my wrt54g2 and lost
    Hi randallel, you may have to do a hard reset before reconfiguring your router with the new modem. To do the proper reset, please press down the reset button for 30 seconds while the power is on. Release the button and unplug the device. Plug it back in and reinstall the settings based on the type of Internet connection that you have. Hope this helps.

  • I can no longer access the web on my IPod Touch through my home wifi network.

    I have an I Pod Touch with operating system 4.2.1.  It has worked fine the past year plus.  Suddenly, I can no longer access webpages on it.  When  try to load a website, looks like it is trying to open the page, but it never fully loads and times out. My I Pod indicates that it recognizes my wifi network and I have tried resetting both my I Pod and my router.  Weirder yet, I can access my Yahoo email on my I Pod and if there is a website link embedded in an email message, i can open it and access the page that way.  Any link on the web page opened through my email however does not work.  My home computer, which is on the same wifi network, is working fine.  The only thing that did occur recently was a power outage. 
    Please help - this is very frustrating.

    LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
    If your Wi-Fi is working, then you should be able to access the internet.
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    * No data is lost due to a reset
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    I was using my wifi last night when I got an error message stating my ip address had been taken over.  Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

    Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

  • Can no longer access home movies from imovie theater on atv. Keep seeing the circle while waiting.

    Can no longer access home movies from imovie theater on atv. Keep seeing the circle while waiting.

    This indicates a network issue.
    Power cycle the ATV and router, reboot the computer.

  • I can no longer access homesharing on my phone since updating to ios6. Is there another step to take?

    I can no longer access home sharing on my phone since updating to ios 6. What else do I need to do?

    I found whats happening at least partialy. My 2 iphones that wouldnt participate in shared library and ipad2 had false logins in music setting.
    I tried log out under music, and log in, and it said it can't log in.
    same time, funny thing happened, app store is also unreachable.
    I only restored in itunes my ipad2 for testing (it was suggested by apple via apple support chatline) and it worked, I can connect to shared lib only with ipad.
    Alas, it partialy downloaded my library???? and it had errors in it.
    I restarted router, itunes server, ipad (resetting network settings and loosing all my 20 or so connections I have for different places!) and ipad works.
    My wife's iphone managed to log on into music settings to home sharing, but it only downloaded partialy itunes library. I am not restoring it since Id loose a lot more!
    My own iphone4 isn't managing to connect into home sharing.
    I have tried to solve this for a week.
    New firmware of asus RT N66U gorgeously capable router and all the things I did came to nothing.
    I think it's n iOS wifi communications problem, and only apple can solve it.
    no idea how to complain to them....
    Needless to say, my iphone and ipad manage to connect everywhere else.
    It looks like the network they use the most, are most affected by this!

  • Can no longer access wifi with ipod touch

    since the most recent upgrade to my ipod touch (4th gen - 8G) i can no longer access any wifi. how do I re-establish those connections?

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Is this the problem?
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Following iTunes update on my computer, I can no longer access or sync my ATV.

    After installing the new version of iTunes, I can no longer access or sync my ATV. Any help would be greatly appreciated.

    Do the following settings for X-Box...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
    Leave Username blank & in Password use admin in lower case...
    On the set-up tab change the MTU Size to 1365 and click Save Settings...
    Click on "Administration" tab and disable UPnP and click Save Settings...
    Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
    1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 3074, leave the protocol as both and under ip address type in 192.168.1.20 and check the enable box, click Save Settings once done...
    2) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
    3) Click on set-up and change the MTU Size to 1452 and click Save Settings...Click on the Status tab and take note of DNS1 and DNS2 Addresses...
    4) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
    IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
    5) Also assign the DNS Addresses on the Xbox
    Use DNS1 and DNS2 Addresses you took note off of the router status tab as Primary DNS & Secondary DNS for the xbox...
    6) Turn off your modem, router, and Xbox...Wait for a minute...
    7) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

  • Time Capsule - can no longer access on MBP Leopard

    For the past 6 or 7 weeks I can no longer access my Time Capsule from my MBP Leopard. However, I do not beleive this is a Time Capsule issue as I am still accessing (and backing up) successfully from a MBP running Snow Leopard. Note, the access and backup were running fine for over a year and suddenly just stopped working. I've done the basics like repair permissions, software update, checked everything. For soem reason, when I try to access, I can see the Time Capsule, I can connect until I get to Data then "mylaptop Sparse Bundle". When I choose that disk image backup - just continues for ever and ever with a dialog box that says "trying to connect" or something like that.
    Any ideas appreciated ...
    thanks

    lumiere wrote:
    "the current volume could not be mounted". Also "The Current Time Machine backup disk can;t be found".
    Has this Mac had any problems since the last successful backup? Such as hardware repairs, especially a new logic board? A full restore?
    Is the +sparse bundle+ currently mounted? If so, eject it and try again.
    If not, or if that doesn't help, try a "full reset" of Time Machine, per #A4 of Troubleshooting.
    Interesting to note that the final backup (7 weeks ago) failed - it looked like hourly backups worked and the final one failed ("says in progress" ?)
    Yes, that's the partial, failed backup. Since it's incomplete, it won't appear in the "Star Wars" display, etc. Once Time Machine gets started, it will "recover" it, and convert it into a normal backup, with a new date & Time.
    After that long without a backup, Time Machine will have a lot of work to do (including recovering the partial backup), so connect via Ethernet if at all possible. It will still take a while, but be 2-3 times faster than WIFI.

  • Color Nook can no longer access library . . How can I resolve this problem?

    I have a Color Nook. Recently it was updated automatically. Since the update I can no longer enjoy reading the library books I once could. I used  Overdrive and Adobe Digital Editions to access my county library in the past but can no longer access it.. I get an error message of E_AUTH_BAD_DEVICE_KEY. Apparently I have lost authorization to the AdobeID server.
    How do I resolve this problem?  

    Well, you could start by asking in the Digital Editions forum,
    http://forums.adobe.com/community/adobe_digital_editions
    This is the Reader one.

  • Since updating my iPhone 4 to ios6 I can no longer access itunes through the itunes app.  I just get a blank white screen.  Is there a fix for this yet?

    Since upgrading my iPhone 4 to the new ios6 software I can no longer access itunes through the itunes app.  I there a fix for this yet?

    Scalesy05 wrote:
    I there a fix for this yet?
    Why would there be a fix?  YOU are having the problem.  I'm not, no one I know is having the problem.  No fix is needed.
    Basic troubleshooting steps clearly outlined in the User Guide are restart, reset, restore from backup, restore as new.  Have you been through any, if not all of these troubleshooting steps yet?

  • HT1918 How can I change my rescue email. I am trying to change my email for my Apple account because I can no longer access the email on the account. My only email I use is my rescue email and it will not allow me to change my Apple ID email to my rescue

    How can I change my rescue email or get rid of it? I need to change my email under my apple ID to the email that is my rescue email. It won't allow me to have the same email. I only have one email address and can no longer access the email address under my apple ID

    Welcome to the Apple community.
    Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

  • Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix.

    Apple changed my Apple ID to the email address associated with my iTunes account. I now can no longer access my account because the old user name is no longer valid and has no password. I have been on the phone with tech support for hours trying to fix this. I can not update any of the apps associated with that user name.

    Is this itunes on the iPad or on my computer? Thank you for the reply.

  • I installed 7.1.2 update for my iphone5 and I have problems.   I can no longer access the internet on my phone.  My wifi is fine, and I've noticed that there is no longer any indication of "LTE" on my phone.

    Against my better judgement, I installed update 7.1.2 on my iphone5, and can no longer access the intenet.  I've dis some searching for a solution, but nothing works.  What has this happened?  And how can I fix it?

    LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
    If your Wi-Fi is working, then you should be able to access the internet.
    Reset the device:
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that doesn't help, tap Settings > General > Reset > Reset All Settings
    If that doesn't help, tap Settings > General > Reset > Reset Network Settings
    You will have to re enter your Wi-Fi password.
    * No data is lost due to a reset
    If nothing above has helped, try here >  iOS: Troubleshooting Wi-Fi networks and connections

  • Following the upgrade to 34.0.5, I can no longer access web pages of our SAN, airco, vSphere Web Clients, etc. How can I correct this?

    Following upgrade to 34.05, can no longer access web pages of the SAN management interface, the airco system, the vSphere Web Client, etc. All still work in Chrome.
    The airco system gives an error:
    Firefox cannot guarantee the safety of your data on 10.32.16.50 because it uses SSLv3, a broken security protocol.
    Advanced info: ssl_error_no_cypher_overlap
    The SAN management interface and vSphere Web Clients display an empty page. Not sure whether these also have problems due to SSLv3.
    I understand you wanting to be cautious, but I seriously doubt I need to face an attack from our SAN. Please, at least give us an option to connect regardless.

    hello, ssl 3.0 is disabled in firefox versions 34 & upwards by default - if you want to re-enable it you can do that like this which will make you vulnerable to the recently published poodle attack though:
    enter '''about:config''' into the firefox address bar (confirm the info message in case it shows up) & search for the preference named '''security.tls.version.min'''. double-click it, change its value to '''0''' and restart the browser.
    https://blog.mozilla.org/security/2014/10/14/the-poodle-attack-and-the-end-of-ssl-3-0/

Maybe you are looking for