Can no longer access the files on my Zen Xtra. Help, plea

I've been using my 60gb zen xtra for over a year now without problems (except for having to replace it twice due to the faulty headphone jacks), but after recently losing one of my hard-dri'ves, I decided to install Creative Mediasource so that I could easily copy all the music on my player to a new hard-dri've. Up until now I'd never used Mediasource - just the regular nomad explorer browser. After I installed Mediasource and rebooted, I can no longer get to the files on the Zen. I know they're still there - I can still play them on the player itself, and I can even access the player - when I click on the Nomad Explorer icon in "my computer" I get into the explorer and the player reacts by going into transfer mode, only when I go into "music library" everything is blank, and when I go into the data library it says 'not connected', even though it's able to show me that I only have 45 gb free, which is accurate. I'm not saying that Mediasource caused this, because I don't know, but I'm desperate to get my music back - having both the hard-dri've fail me and then the player itself would be a catastrophe for me. Any general help, whether with mediasource problems or just general problems accessing the music library would be incredibly appreciated. Thanks!

Geez, what an embarassment. Found all my files right were they were supposed to be. Uh, all's well that ends well? Again, sorry for cluttering up the board.

Similar Messages

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

One of the folders on my external hard drive has transformed into a unix executable file and I can no longer access my files. Is there any way to save the data?

Wow, have seen Files do that, but a whole Folder as I recall!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)

Ever since I installed Safari 5.1 I can no longer access the pdf files on my website. I keep on getting an error with Webkit2webprocess.exe telling me that LogTransport2.dill was not found. Please help..

Ever since I installed Safari 5.1 on my PC (XP) I can no longer access the pdf files on my website. I have no problems with Chrome and Firefox. I keep on getting a message from WebKit2WebProcess.exe that the LogTransport2.dill was not found. (I HATE PCs...) I tried reinstalling Acrobat 9. I tried reinstalling Safari. I even tried an older version of Safari. Nothing Helped. Others have tried it on their machine, and it worked fine. But I do not know what is the matter with mine. I suspect the root cause is the missing LogTransport2.dill file. But I do not know how to go about getting it. Your help is truly appreciated. My website is http://www.hlmartworks.com.

I have also found the article that provides 3 solutions but none of the solutions worked.

Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click

Just updated to itunes 12.1.0.71 - big problem - can no longer access the legacy "Get Info" where you could change multiple files, easily add artwork, add album name for TV show, and much more. In previous iTunes 12 you'd right click and hold shift key and be able to get to it. Anyone figured this out?

The "legacy" metadata editors, for which there was a "back door" in iTunes 12.0, have gone from 12.1. However, the revised editors in 12.1 provide access to (almost) all the metadata elements that were available in iTunes 11, albeit in a different layout and with some additional constraints based on media kind. Some users have / will have an issue with the statement that "Get Info has been completely redesigned in iTunes 12 to focus your attention only on what’s necessary for the selected item" since that removes some metadata elements that people may have been using in creative ways. iTunes 12.1 basically gives you access to the fields that Apple think are necessary ... . Some of the things that have been excluded by this rule:
track and disc number fields for video media kinds
show and episode fields for music
description tab for audiobooks made up of more than one file
Obviously the first two examples can be regarded as "overloading" the metadata elements - i.e., using them in ways that the designers didn't intend - but given that some users do find valid cases for this it's a shame that they've been deprecated in the new UI. There are couple of workarounds:
in songs view (or any of the other columnar views), you can still select any fields to display, independent of media kind, and these can be edited (though only one at a time) by double-clicking in the relevant "cell"
you can (temporarily) change the media kind of an item (or group of items) to get access to metadata elements that would otherwise be inaccessible.
It may be worth submitting an issue via https://www.apple.com/feedback/itunesapp.html - I can't see it as a huge development task to have a user preference to switch between "show all fields" and "filter fields based on media kind".
One other oddity/irritation is that some of the tabs don't, by default, show all the available fields - you need to scroll up/down to access them or to expand the window by dragging on one of its corners. Fortunately, the latter seems to be persistent - once you've done this to make all the fields visible the editor will open at the same (larger) size when opened again.

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed?

On iPhoto, I can no longer access the 'Classic' option which would lay out my photos on the page. It will send them as attachments only. I need the page layout for my work. Any thoughts as to why this has changed? It used to fully lay out the photos so I could add notes and detailed information before I sent them. I am thinking it is something simple that I have just missed...

The "Photos" view has been replaced by the Media Browser.
Most applications will show you the Photos icon in the Sidebar, when you need to select photos in a file chooser dialoge. Mail, Safari, the iWork apps. See Terence Devlin's User Tip: How to Access Files in iPhoto
For example, in the File > Open dialogue in Preview I am seeing this in the sidebar.

Macbook pro can no longer access windows file share. 'This file server is available on your computer'

Hi all,
We have a consultant who uses a macbook pro to access the internet and a windows share within our network. He has been accessing the internet and the windows share fine for over 4 weeks and overnight he can no longer access the internet or this windows share. I have got the error down to a specific windows share which is actually a share on a DC hence the loss of internet. When this user plugs in via ethernet he can view all network locations as expected and can access everyone succesfully bar this specific one. Everytime he tries to access this share he gets the following error: 'This file server is available on your computer. Access the volumes and files locally'. I have another macbook pro that can successfully access this share.
I have tried renewing leases, browsing the network in finder, using 'cmd + k' all produce the same message.
The user is running Mountain Lion
Any ideas?
Adam

Find and delete the ~/Library/Preferences/com.apple.sidebarlists.plist file. This is what keeps track of all your current server share mounts. Maybe the file is corrupt or something. Once you delete it, reboot the machine and then try again. Don't empty the trash until you're sure everything works after the reboot.

HT1918 How can I change my rescue email. I am trying to change my email for my Apple account because I can no longer access the email on the account. My only email I use is my rescue email and it will not allow me to change my Apple ID email to my rescue

How can I change my rescue email or get rid of it? I need to change my email under my apple ID to the email that is my rescue email. It won't allow me to have the same email. I only have one email address and can no longer access the email address under my apple ID

Welcome to the Apple community.
Once you have created a rescue address, you cannot delete it, nor can you change it to the same address as used by your ID. There are numerous providers you can get additional email addresses from, such as Hotmail, Yahoo, Google etc etc.

I installed 7.1.2 update for my iphone5 and I have problems. I can no longer access the internet on my phone. My wifi is fine, and I've noticed that there is no longer any indication of "LTE" on my phone.

Against my better judgement, I installed update 7.1.2 on my iphone5, and can no longer access the intenet. I've dis some searching for a solution, but nothing works. What has this happened? And how can I fix it?

LTE indicates cellular. Tap Settings > Cellular then switch Cellular Data ON.
If your Wi-Fi is working, then you should be able to access the internet.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
* No data is lost due to a reset
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

I was using my wifi last night when I got an error message stating my ip address had been taken over. Then safari stopped working and i can no longer access the internet. I looked at my ip address and it states 000.000.000....can someone please help?

Sounds like a bogus pop up. In any case power down your Mac, your modem, your router. Then power back up in 1 minute sequence; modem, router, Mac.

Problem after updating to iTunes 10.5 on Windows Vista.. I can no longer access the iTunes store..

Hi
After updating to iTunes 10.5 on Windows Vista I have found that I can no longer access the iTunes store... I am left with a blank iTunes screen with the loading bar stuck at halfway..
All other features seem to work... only opening the iTunes store is failing..
I have ran the diagnostics feature and this says everything is ok, so I'm a bit stuck
Please help

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

Can no longer access the iTunes store.

As of a few days ago I can no longer access the iTunes Store. Keep getting the page that urges me to upgrade.
I cannot not upgrade to the current version on my G5 Power PC. Cannot access by using Search either. I am running
iTunes 7.5 because all newer versions required an upgrade of Quicktime which screwed up the performance of Final Cut Studio,
which I can also not upgrade because I don't own an Intel Mac. I am so tired of Apple not supporting their loyal customers
who own older Macs, especially in these hard economic times. Was considering the purchase of an iPhone, but not anymore.
If anyone knows of a work around to the iTunes problem I would appreciate an answer. It not, then Goodbye Apple it was nice
knowing you.

This is what I had to do to access iTunes store with 10.4.11 (took all day for the downloads)
1. download & install iTunes 9.2.1 (101 MB)
2. download & install Quicktime 7.5.5 (61 MB)
3. message 'need to install Safari 4.0.3 or later' (and I never use Safari)
4. download Safari (26 MB)
5. Safari won't install without 'latest security update'
6. download latest security update 2009-005 (Intel) v. 1.0 (172 MB)
7. take a long walk
8. install security update and restart
9. install Safari and restart
And yes, now I can download music again from the iTunes store. I would have given up and gone with Amazon.com but mp3 downloads are only available to folk in USA, and I'm in Australia.

HT3843 I install the Genius for Apps and I can no longer access the Apps Store on my I phone

I installed the Genius for Apps on my new IPhone 5 and I can no longer access the App Store and when I tap App Store I just get a white screen with the heading Genius for Apps with a white screen and no active keys.

You can not merge accounts.
Apps are tied to the Apple ID used to download them, you can not transfer them.

Updated to 10.4.1 on Itunes and now can no longer access the actual Itunes store ...

Now i have a bit more space, i can explain what is really properly wrong. The other day i updated my itunes to the 10.4.1 version and now can no longer access the Itunes store - whenever i try to do so i get the bar at the top gets to about half way then stops and nothing happens - on rare occasions however i am taken into a place that resembles the Itunes store but there is no detail and whenever i click on anything, NOTHING happens.
Now on a SUPER RARE occasion i'll get a notice that the request was timed out?
If ANYBODY can help me i'll be very grateful
Matthew

Purple-Gecko...all that I can say is, "Boom!!!" You are THE man/woman, whichever the case may be.
The "netsh winsock reset" command worked like a charm for my machine (running Windows XP SP3). I have had two weeks of frustration with this issue and finally found your post which got me back online with the iTunes store. My problem accessing the iTunes store began once I downloaded and installed iTunes 10.5 in preparation to upgrade to OS5. Once 10.5 was installed, I could open iTunes and access everything except the store (which prevented any of my devices from being able to sync). I followed all of the suggestions that I could find in Apple Support and the suggestions that I was emailed from Apple's support techs. I unistalled all Apple software and reinstalled iTunes multiple times, and still could not access the store.
Your suggestion is the only "cure" that I have found.
I thank you, my iPod thanks you, and my iPhone 4 thanks you for taking the time to post this fix.

After iPhoto upgrade i can no longer access the photos stored on my external hard drive, after iPhoto upgrade i can no longer access the photos stored on my external hard drive

I was just about to order a photo book, using photos stored on an external hard drive. I organised the book and pressed 'buy'. IPhotos instructed me that I needed to upgrade and so I went on the ASpp store, bought the upgrade and installed as directed. I then used the iPhoto Library upgrader as directed.
After the iPhoto upgrade I can no longer access the photos stored on my external hard drive. I am able to access the photos stored on my internal hard drive - the remainder (including the photo album) seem to have vanished into thin air.
Any suggestions please?

What format is the external drive?

I can no longer access the iTunes store, I get a message saying I need to update iTunes but cannot as I am on Mac OSX 10.4.1

I have an account with the iTunes store but can no longer access the store because I get a message in iTunes store window telling me to update to an iTunes version that will only run on Mac OS 10.5. I am on Mac OSX 10.4.1 and do not plan on upgrading that version.

This is what I had to do to access iTunes store with 10.4.11 (took all day for the downloads)
1. download & install iTunes 9.2.1 (101 MB)
2. download & install Quicktime 7.5.5 (61 MB)
3. message 'need to install Safari 4.0.3 or later' (and I never use Safari)
4. download Safari (26 MB)
5. Safari won't install without 'latest security update'
6. download latest security update 2009-005 (Intel) v. 1.0 (172 MB)
7. take a long walk
8. install security update and restart
9. install Safari and restart
And yes, now I can download music again from the iTunes store. I would have given up and gone with Amazon.com but mp3 downloads are only available to folk in USA, and I'm in Australia.

Can no longer access the files on my Zen Xtra. Help, plea

Similar Messages

Maybe you are looking for