Can no longer boot to MacOSX after bootcamp install

Hello all, I have an issue to where I can no longer boot into the Mac OSX partition after what appears to be a failed Windows bootcamp install. As I was running the bootcamp assistant process, a reboot occurred and I was greeted with the "No bootable device -- insert boot disk and press any key". I have no idea how to get past this and boot back to OSX.
Things I have tried:
Holding down the "option" key does nothing, even using a USB keyboard
Resetting PRAM (CMD + OPT + P + R) does nothing, even with USB keyboard
I have put in a MAC OSX 10.7 Disk and cannot boot to disk using CMD + C on startup
I also pulled the hard drive out and connected it to another PC and wiped the drive completely. I put it back in the macbook and I am still presented with this error. It seems, even though I get the Mac startup tone, that it is stuck in which ever OS it tried to run previously, that being Windows. Not sure why I am still receiving this error even after wiping the drive completely clean.
As far as hardware goes, I am pretty sure its a late 2010 Alumn. Macbook Pro. I cant get the current model number since I cant boot the OS. Any help is appreciated.

Please reset SMC as well.
You can get the serial number from the back cover and use https://selfsolve.apple.com/agreementWarrantyDynamic.do to find the model.

Similar Messages

  • IMac won't boot OsX Partition after Bootcamp install/uninstall.

    Hello,
    I have bought 2 late 2012 21.5 iMacs last year and have used both the same way. Here is what happened with one of them recently.
    Fisrt af all I've installed bootcamp 1 year ago in both iMacs without issues and was ok so far, and was using exclusively Windows 7 partition. The trouble iMac started with some startup issues during boot/reboot (screen was frozen with green/grey horizontal lines), but worked fine after following manual start up.
    Lately I've been trying to boot from OsX partition and it freezes in the apple logo every time.
    I have already done the SMC / PRAM procedures, without success.
    I have tried to download and do a fresh OsX install (Mountain Lion, Mavericks and Yosemite). Can't boot from Mavericks / Yosemite flash drive install (both freeze at apple logo - horizontal lines), and only had partial success with one Mountain Lion 10.8.5 flash drive install that booted all right and the first part of the installation process was ok, but after the initial reboot, it happened to freeze the same way before.
    The iMac failed to boot in safe mode (stops booting at 25% and then freezes on apple logo), and show no issues with AHT tests.
    I can boot in single user mode, but it reboots after a few seconds. I noticed some errors messages during this boot.
    It fails to boot in verbose mode, showing a few lines of errors (images attached), and then freezes in a green horizontal line screen.
    I can still boot from Bootcamp flash drive and Ubuntu Flash drive, and install both OS. The only issue is with OsX itself. I have used Gparted in Ubuntu to Format the hole partition to HFS+, and can't find any errors in hard drive tests.
    I thought about buying a thunderbolt cable and try to do a Clone of my other iMac, but don't know if it will work.
    Any other tests/suggestions about this issue?
    Regards,

    Fixed the problem with this setup
    Of course this means i just lost 4GB.
    Let me tell the full story.
    In the beginning, long ago, once upon a time. My iMac had 2x2GB ram sticks which were in the two DIMM1 Banks. I then told myself "I WANT MORE RAM BECAUSE LOLZ". So i bought 2x4GB ram sticks. The two empty slots were Bank 0/DIMM0 and Bank 1/DIMM 0. and I added them in there. having done that, I booted OS X up, worked great, had 12GB, everything was shiny and beautiful. Soon after I wanted to try it out on windows. I restarted my computer and BAM the blinking cursor just sits there, being stubborn and all. I then told myself "holy balls, this new ram i got is bonkers" (them words, I blame the language filter). Then after giving it a little thought, i just asked myself if it was because I had ram from two different manufacturers. I removed my old ram, which has nice Samsung stickers on them, and booted it up on windows. Still had the same problem, I then decided that maybe this is all really mentally challenged so to win I had to think like a retard. I took my new ram and inserted it in the same slots where my old ram sticks were (DIMM1 Banks), booted windows up and IT WORKED.
    I still hold all of my WHYs on this subject but I will keep messing around to see if I find a better solution than just leaving both DIMM0 banks empty

  • Can't long in to iWeb after clean install of Leopard and upgrade to Snow

    I just recently did a clean install of Leopard and then upgraded to Snow Leopard. Everything is working ok except for iWeb. At first, I thought I had just forgotten my password but then I reset it. I logged on here with it and on iTunes. I can't edit my page at all. How do I get into iWeb now? The template I created through iWeb of course is not on my computer- it's just on my iWeb site. Can I call to get someone th help me or do I need to start all over. How do I do that because I have a subscription?
    Thanks
    Daniel Arnold

    heatharnold wrote:
    ...do I need to start all over.
    Daniel ~ Welcome to the discussions. If you didn't backup iWeb's key Domain file before the clean install, you'll probably need to start over. I say "probably" because even though you didn't deliberately back up the Domain file, perhaps you were running Time Machine — in which case, there's still hope:
    Recovering items using Time Machine and Spotlight
    Only iWeb's Domain file can be opened in iWeb. See this Apple doc on How to back up MobileMe data. It says:
    Any websites you have published with iWeb should still be available within iWeb. iWeb stores everything in a Domain file, normally located in the ~/Library/Application Support/iWeb folder (although it can be moved). If you no longer have this file, you can view your currently published pages and manually recreate them within iWeb, but there is no way to import published pages back into iWeb.
    You can manually back up the Domain file, or use Backup to back it up.
    Paragraph 2.3 of this FAQ page gives some tips on how to use published files, graphics, photos, etc., to help rebuild the site from scratch:
    http://iwebfaq.org/site/iWebBackupretrieve.html
    And in future:
    _iWeb ’08: Backing up your Domain file_

  • Can no longer boot into Mavericks 10.9.5

    My problem is that I can no longer boot into Mavericks 10.9.5 on my mid-2012 Macbook Pro.  The problem arose suddenly without any known major changes to my software or hardware.  The booting process freezes with the apple visible and the circle below it spinning endlessly.  Every several seconds, the display very briefly gets brighter, then the circle starts spinning again and the process repeats itself.  It never gets to the user login screen.
    Other than keeping various apps up to date, I don't recall any recent major operating system or other major software updates, nor have I made any recent hardware changes.  I've searched a multitude of threads and and tried any number of fixes without success.  Here's what I've tried so far (and probably a few more that I can't remember): (1) Repaired the startup disk with both Recovery HD -> Disk Utility and single-user mode -> /sbin/fsck -fy; (2) Repaired the startup disk permissions with Recovery HD -> Disk Utility; (3) Reloaded the Mavericks 10.9.5 operating system twice; (4) deleted /Library/Preferences/com.apple.loginwindow.plist; (5) reset PRAM and NVRAM; (6) booted with "D" pressed and ran the Apple hardware test, which ran for about 40 minutes and reported no problems; (7) tried booting from a bootable clone of Mavericks 10.9.5 on an external hard drive, which also failed at the same place with the apple showing and the circle below it spinning endlessly.  ***Oddly, I am able to boot from a bootable clone of Mountain Lion on an external hard drive.  It's Mavericks that won't boot.***
    Here is the part of the system log the repeats itself over and over and seems to correlate with the repeated failed attempts to complete the booting process.  Any help would be appreciated beyond words:
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Server is starting up
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 retained (2 references)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: init_page_flip: page flip mode is on
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
    May  2 12:49:01 --- last message repeated 1 time ---
    May  2 12:49:01 SCH-MacBookPro kernel[0]: IOHIDSystem::registerScreenGated: Screen 0 recycled from pid 343
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: mux_initialize: Mode is dynamic
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 54 modes for display 0x00000000 [54, 0]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 51 modes for display 0x00000000 [51, 0]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Found 1 modes for display 0x00000000 [1, 0]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSMachineUsesNewStyleMirroring: true
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: MPServiceForDisplayDevice: Invalid device alias (0)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
      Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
      UUID 0x3ef17c2fc9ab601507ec022fbd95576c
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (0, 0)[4096 x 2160], 2 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (0, 0)[0 x 0], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (0, 0)[0 x 0], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (2560, 0)[1680 x 1050], 54 modes available
      Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
      UUID 0xde23f9c1cf7b915b2afe83aecee77b54
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: WSSetWindowTransform: Singular matrix
    May  2 12:49:01 --- last message repeated 1 time ---
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: GL mask 0x10; bounds (0, 0)[2560 x 1440], 51 modes available
      Main, Active, on-line, enabled, Vendor 610, Model 9227, S/N 162f0ab5, Unit 4, Rotation 0
      UUID 0x3ef17c2fc9ab601507ec022fbd95576c
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003d: GL mask 0x2; bounds (3584, 0)[1 x 1], 2 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 1, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f0041: GL mask 0x20; bounds (3585, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 5, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x003f003f: GL mask 0x8; bounds (3586, 0)[1 x 1], 1 modes available
      off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 3, Rotation 0
      UUID 0xffffffffffffffffffffffffffffffff
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: GL mask 0x5; bounds (435, -1050)[1680 x 1050], 54 modes available
      Active, on-line, enabled, built-in, boot, Vendor 610, Model a005, S/N 0, Unit 2, Rotation 0
      UUID 0xde23f9c1cf7b915b2afe83aecee77b54
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXPerformInitialDisplayConfiguration
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04248378: Unit 4; Vendor 0x610 Model 0x9227 S/N 372181685 Dimensions 23.50 x 13.23; online enabled, Bounds (0,0)[2560 x 1440], Rotation 0, Resolution 1
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003d: Unit 1; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3584,0)[1 x 1], Rotation 0, Resolution 1
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f0041: Unit 5; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3585,0)[1 x 1], Rotation 0, Resolution 1
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x003f003f: Unit 3; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (3586,0)[1 x 1], Rotation 0, Resolution 1
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]:   Display 0x04280142: Unit 2; Alias(2, 0x5); Vendor 0x610 Model 0xa005 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (435,-1050)[1680 x 1050], Rotation 0, Resolution 1
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXMuxBoot: Boot normal
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, accelerator 0x00004f2f, unit 0, caps QEX|MIPMAP, vram 1024 MB
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01024400, GL mask 0x00000003, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, accelerator 0x00004907, unit 2, caps QEX|MIPMAP, vram 1024 MB
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor: GL renderer id 0x01022727, GL mask 0x0000003c, texture max 16384, viewport max {16384, 16384}, extensions FPRG|NPOT|GLSL|FLOAT
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: GLCompositor enabled for tile size [256 x 256]
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXGLInitMipMap: mip map mode is on
    May  2 12:49:01 SCH-MacBookPro.local loginwindow[353]: **DMPROXY** Found `/System/Library/CoreServices/DMProxy'.
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04248378: Unit 4; ColorProfile { 2, "Thunderbolt Display"}; TransferFormula (1.000000, 1.000000, 1.000000)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Display 0x04280142: Unit 2; ColorProfile { 3, "Color LCD"}; TransferTable (256, 12)
    May  2 12:49:01 SCH-MacBookPro.local launchctl[356]: launchctl: Dubious permissions on file (skipping): /Library/LaunchAgents/com.adobe.AAM.Updater-1.0.plist
    May  2 12:49:01 SCH-MacBookPro.local launchctl[356]: com.apple.findmymacmessenger: Already loaded
    May  2 12:49:01 SCH-MacBookPro.local com.apple.SecurityServer[23]: Session 100021 created
    May  2 12:49:01 SCH-MacBookPro.local UserEventAgent[357]: Failed to copy info dictionary for bundle /System/Library/UserEventPlugins/alfUIplugin.plugin
    May  2 12:49:01 SCH-MacBookPro.local airportd[71]: _doAutoJoin: Already associated to “schuyler”. Bailing on auto-join.
    May  2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Setting the initial value of the magsave brightness level 1
    May  2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window Started Security Agent
    May  2 12:49:01 SCH-MacBookPro.local ManagedClient[362]: ApplePersistence=YES
    May  2 12:49:01 SCH-MacBookPro.local SecurityAgent[363]: Failed to create agent mechanism, failing authentication!
    May  2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: error creating mechanism agent
    May  2 12:49:01 SCH-MacBookPro.local com.apple.authd[84]: engine[353]: evaluate returned -60008 returning errAuthorizationInternal
    May  2 12:49:01 SCH-MacBookPro.local loginwindow[353]: Login Window - Returned from Security Agent
    May  2 12:49:01 SCH-MacBookPro.local loginwindow[353]: ERROR | -[LoginApp performAuthPluginRequest:] | AuthorizationRef doesn't have a username. Exiting.
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: CGXRestartSessionWorkspace: session workspace exited for session 256 (on console)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (1 references)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: Session 256 released (0 references)
    May  2 12:49:01 SCH-MacBookPro.local WindowServer[354]: loginwindow connection closed; closing server.
    May  2 12:49:03 SCH-MacBookPro com.apple.launchd[1] (com.apple.loginwindow): Throttling respawn: Will start in 1 seconds
    May  2 12:49:04 SCH-MacBookPro.local loginwindow[364]: Login Window Application Started
    May  2 12:49:04 SCH-MacBookPro com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 7 seconds

    Hi
    You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR.  But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
    Hope you don't need the info on disks.  If you do, I would install another HDD, load XP, then copy original Disk to save place.
    Good luck
    Jocko

  • HT4623 my ipad can no longer acces itunes store after iso 7 was installed... can i go back to ixo6

    i can no longer access itunes store after iso 7 was installed... can i go back to iso 6

    No you can't.
    Reboot your iPad:  Press and hold BOTH the power and home buttons at the SAME for up to 30 seconds, until the Apple Logo appears, then let go of both buttons and your iPad will restart.  You won't lose any data settings.  When your iPad restarts see if you can access iTunes.

  • I can no longer open any PDF after my trial of Acrobat XI Pro finished...Help

    I can no longer open any PDF after my trial of Acrobat XI Pro finished...Help

    I would try using this tool to first remove all traces of Acrobat from your computer:
    http://labs.adobe.com/downloads/acrobatcleaner.html
    Then, you can download the full offline Reader installer from
    http://get.adobe.com/reader/enterprise/
    After downloading, restart your computer and run the installer before doing anything else.

  • , I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive. Still syncing with i-Pod but playlists lost , podcasts no longer syncing, Can't play music .. how to restore back to original state .

    I-tunes can no longer 'locate' my library , after a botched cut & paste attempt to back-up onto an external drive.Cant play any music as it "can't find" the library  Still syncing with i-Pod but playlists lost , podcasts no longer syncing.   How to restore back to original state . I have tried re-installing  - with no change

    I do the same thing as you do...
    My music is on an external drive as to not use up gigabytes of storage that need not be used for media.
    There are a couple basic principles to iTunes that I believe you should know.
    1. iTunes is not a media storage program. It does not store your media "in iTunes". It simply is an organization tool for your media already on a hard disk.
    2. As iTunes is not a storage mechanism, it has no way to "know" whether or not the media that is listed is actually there. This is where the "design" of iTunes comes into play.
    I like to think of iTunes as a bread-crumb trail. The "music" in iTunes, isn't actually there. The bread crumb is the location on the external hard drive.
    If that bread crumb trail disappears (in this case the external drive you use). If said external drive is not plugged in, that bread crumb trail is not able to be followed. iTunes is "lost" and unable to find the media. The only way to remedy this is to place the media on your local drive.
    To address your issue of the library. If you hold down shift, you can select your library on your external drive. It will be a file with an .itl extension. The folder name will be your external drive.
    I go into edit > preferences > advanced and set my library to the correct location. Make sure you check the box "Copy to iTunes Folder when importing" (or whatever it says).
    You can't fix the issue of iTunes not seeing the media if your drive is unplugged unless you physically move the content to your OS HDD...Or any other HDD you use.

  • FreeBSD didn't install, i can no longer boot into Windows

    I unsuccessfully installed FreeBSD and I can no longer boot into an OS from the HD.  I attempted to install BSD onto the "G" drive below however the the install gave me some kind of storage error and I can no longer boot into Windows.  While going through the BSD installation process I opted to NOT install a boot manager (I incorrectly assumed that this would leave my existing boot manager intact).
    Here's how I was partitioned pre-FreeBSD (these are all partitions on the same SATA 80GB drive):
    C:\ Windows ME
    D:\ Windows XP sp1a
    E:\ Windows XP-64 beta
    F:\ Longhorn 64 preview
    [G]:\ unpartitioned 4GB
    [F]:\ uformatted 4GB
    H:\ NTFS Storage
    I:\ FAT32 Storage
    Before I attempted to install BSD, I used c:\boot.ini as my boot manager.  
    Now when I try to boot it says:
    Code: [Select]
    Invalid Partition
    Invalid Partition
    No /boot/loader
    FreeBSD/i386 boot
    Default: 0:ad(0,a)/kernel
    boot:
    Invalid Partition
    No /kernel
    FreeBSD/i386 boot
    Default: 0:ad(0,a)/kernel
    boot: _ 
    Has anyone else ever had this happen to them?  If so how can I reenable booting into Windows?

    Hi
    You got a prob I think, if you can boot a windows, MSconfig, startup options might restore the boot files.Only other thing is to try and either load a new windows and let it setup a boot file, or perhaps a win98 startup disk, and fdisk, then set active partiton, which will set an MBR.  But that would leave a load of work to do, I think I'd opt for an install of XP, and let it repair existing installation, and make a new boot file.
    Hope you don't need the info on disks.  If you do, I would install another HDD, load XP, then copy original Disk to save place.
    Good luck
    Jocko

  • My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    My ipod nano is no longer recognized by itunes after I installed windows 8.1.  The ipod nano still is recognized and works with a Windows 7 computer

    Hello, Pete. 
    Here is an article I would recommend going through when an iPod is not recognized by iTunes or the computer.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    Usually the resolution is updating the Apple Mobile Device Driver.  See the section labeled Verify that the Apple Mobile Device USB Driver is installed > For Windows Vista, Windows 7, and Windows 8 > Update the Apple Mobile Device Driver.
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Cheers,
    Jason H. 

  • I can no longer get the column view since installing 12.0.1.26.

    I can no longer get the column view since installing 12.0.1.26. The only thing my iTunes for PC will not display the column view of songs any more  The only thing I have access to is the view that displays the album covers. I used the Help function, followed the procedure several times.  When I click on the music icon, the icon flashes, but does not bring up a menu as shown in the "help" file.

    1) reset the iPad. Hold power home button until screen goes black, apple logo appears-release
    2) delete the app, reinstall.
    3) wait for an update to the app

  • Can not  start/stop fullfilment server after fresh install

    Can not start/stop fullfilment server after fresh install
    Product: e-business suite (11.5.9)
    Platform: Win XP 5.1 (SP2)
    We have performed a new installation of ebusiness suite in our windows platform.
    Installtion went with out any problem.
    But we can not start/stop the fullfilment server. While trying to start/stop the server we are getting follwing error message:
    c:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih\jtffmctl.cmd start
    script returned:
    C:\oracle11i\prodcomn\admin\scripts\PROD_03274019ih>echo off
    You are running jtffmctl.cmd
    Mon 13/09/2004
    01:46 PM
    "Starting Fulfillment Server for "PROD" on port "9300" ...\n"
    "Error returned while running OUI"
    ERRORCODE = 1 ERRORCODE_END
    .end std out.
    Class not found: oracle.apps.jtf.fm.engine.processor.Processor
    Please let us know how to fix this issue.
    Regards, Kunal

    edit the jtffmctl.cmd and make sure that it point to the correct java path, alse try to use java 1.4.1

  • HT5639 On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

    On my iMAC using Mountain Lion v. 10.8.3, is there a way to increase the size of my Boot Camp Partition after I installed Windows 8? Thanks.

    Yes, purchase Paragon Camp Tune for the job.

  • Firefox Mobile Version currently Rolls itself up. you can no longer view the web page re installed mobile version still firefox rolls it self up even in full screen mode

    Firefox Mobile Version currently Rolls itself up. you can no longer view the web page re installed mobile version still firefox rolls it self up even in full screen mode.
    "Firefox mobile and Firefox installed on my PC both do exactly the same thing BTW."

    That is a legitimate Mozilla newsletter. As it says in the email:
    You're receiving this email because you subscribed to receive email newsletters and information from Mozilla. If you do not wish to receive these newsletters, please click the Unsubscribe link below.
    Unsubscribe https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/
    Modify your preferences https://www.mozilla.org/en-US/newsletter/existing/ad9febcf-65ac-41fd-810b-798945f448f3/ "

  • Can't get iWork 09 functional after clean install...

    Can't get iWork 09 functional after clean install.  Could use migration assistant and restore from TM, but don't want to bring all apps...just iWork suite.  Original purchased iWork via a trial download, then paid for license.  Here is my error message when trying to open Pages: 
    Process:         Pages [2838]
    Path:            /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
    Identifier:      com.apple.iWork.Pages
    Version:         4.3 (1048)
    Build Info:      Pages-10480000~1
    Code Type:       X86 (Native)
    Parent Process:  launchd [173]
    Date/Time:       2013-01-18 19:59:57.810 -0600
    OS Version:      Mac OS X 10.7.5 (11G63)
    Report Version:  9
    Interval Since Last Report:          62361 sec
    Crashes Since Last Report:           13
    Per-App Crashes Since Last Report:   4
    Anonymous UUID:                      33AE1986-2E77-4022-B824-C159014BAFF2
    Crashed Thread:  0
    Exception Type:  EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000002, 0x0000000000000000
    Application Specific Information:
    dyld: launch, loading dependent libraries
    Dyld Error Message:
      Library not loaded: @rpath/Inventor.framework/Versions/C/Inventor
      Referenced from: /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      Reason: image not found
    Binary Images:
        0x1000 -   0x354fe3  com.apple.iWork.Pages (4.3 - 1048) <3F2BE397-E81E-3355-C0DE-8B0F014E897B> /Applications/iWork '09/Pages.app/Contents/MacOS/Pages
      0x3ec000 -   0xefdffb  com.apple.sfcompatibility (1.0 - 0.0.1d1) <2237C99F-3144-0918-47A2-403A125BA9D0> /Library/Application Support/iWork '09/*/SFCompatibility.framework/Versions/A/SFCompatibility
    0x15e6000 -  0x15ffff7  com.apple.Keynote.sfstyles (1.0 - 1.0) <25A20E06-8C1E-1BD9-7F0C-8B4027676DFD> /Library/Application Support/iWork '09/*/SFStyles.framework/Versions/A/SFStyles
    0x1610000 -  0x1acbfeb  com.apple.SFTabular (1.0 - 1.0) <BB41B4DC-2F8E-B7E3-6274-7A92437B8FF4> /Library/Application Support/iWork '09/*/SFTabular.framework/Versions/A/SFTabular
    0x1c8b000 -  0x1d45ff3  com.apple.Keynote.sfutility (1.0 - 0.0.1d1) <ED93C91F-C30E-541E-BDD3-04A25579EAFB> /Library/Application Support/iWork '09/*/SFUtility.framework/Versions/A/SFUtility
    0x1db7000 -  0x1f48ff3  com.apple.Keynote.sfdrawables (2.0 - 2.0) <7D531D66-A640-D293-817E-6D5C8D15E26D> /Library/Application Support/iWork '09/*/SFDrawables.framework/Versions/A/SFDrawables
    0x2005000 -  0x2278fef  com.apple.Keynote.SFWordProcessing (1.0 - 20030221_1) <F7952C77-8CF1-30F4-7FA7-A3A45FA2E184> /Library/Application Support/iWork '09/*/SFWordProcessing.framework/Versions/A/SFWordProcessing
    0x2397000 -  0x23e2ff7  com.apple.Keynote.SFControls (1.0 - 20030306_1) <37F86C48-E752-688E-9A75-3F4D3BA5C054> /Library/Application Support/iWork '09/*/SFControls.framework/Versions/A/SFControls
    0x240f000 -  0x2468ff7  com.apple.Keynote.sfarchiving (1.0 - 0.0.1d1) <E489EE3A-D0D0-749C-E38B-C9E87AA2BEE3> /Library/Application Support/iWork '09/*/SFArchiving.framework/Versions/A/SFArchiving
    0x249a000 -  0x25a8fef  com.apple.Keynote.sfrendering (1.0 - 1.0) <A817A67F-149D-85C4-4625-5DB753E8A4FF> /Library/Application Support/iWork '09/*/SFRendering.framework/Versions/A/SFRendering
    0x260a000 -  0x2692fff  com.apple.Keynote.proofreader (0 - 1) <6442D80E-854E-F13A-0C69-AFF7F7D927F7> /Library/Application Support/iWork '09/*/SFProofReader.framework/Versions/A/SFProofReader
    0x26a0000 -  0x275afef  com.apple.Keynote.sfinspectors (1.0 - 1.0) <B9BB5F5B-F7CE-8F1A-F308-43A11E6617A5> /Library/Application Support/iWork '09/*/SFInspectors.framework/Versions/A/SFInspectors
    0x27b6000 -  0x2b20ff7  com.apple.Keynote.sfcharts (2.0 - 2.0) <0A1A116C-2AE2-7C65-E93B-1A54B1153626> /Library/Application Support/iWork '09/*/SFCharts.framework/Versions/A/SFCharts
    0x2d52000 -  0x2d97fe7  com.apple.Keynote.SFAnimation (1.0 - 0.0.1d1) <057D09D4-072E-995E-D3D0-42D1E0AAC07C> /Library/Application Support/iWork '09/*/SFAnimation.framework/Versions/A/SFAnimation
    0x2dc2000 -  0x2decfe3  com.apple.Keynote.sflicense (1.0 - 0.0.1d1) <6399F656-7AD7-1357-F477-CB6128248032> /Library/Application Support/iWork '09/*/SFLicense.framework/Versions/A/SFLicense
    0x8fe6e000 - 0x8fea0aa7  dyld (195.6 - ???) <60FD3471-A1D7-342E-99A7-3EDECDAEC6EC> /usr/lib/dyld
    0x91f32000 - 0x921e4ff7  com.apple.AddressBook.framework (6.1.3 - 1091) <B8CC707C-6368-3CDD-BE38-D2335B7CC2DE> /System/Library/Frameworks/AddressBook.framework/Versions/A/AddressBook
    0x928f0000 - 0x928f0ff0  com.apple.ApplicationServices (41 - 41) <C48EF6B2-ABF9-35BD-A07A-A38EC0008294> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x95317000 - 0x95396ff7  com.apple.iLifeMediaBrowser (2.6.4 - 502.4.5) <5C10CC72-586E-3497-9873-A0ACFB6156C3> /System/Library/PrivateFrameworks/iLifeMediaBrowser.framework/Versions/A/iLifeM ediaBrowser
    0x95fe4000 - 0x96a79ff6  com.apple.AppKit (6.7.5 - 1138.51) <B9D3DCA0-9765-354E-9730-75A45A97DDFD> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x972ab000 - 0x972f3ff7  com.apple.SystemConfiguration (1.11.3 - 1.11) <C8DE66D7-0880-3F5F-A4BA-215B52DEFC74> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
    0x97c14000 - 0x97debfe7  com.apple.CoreFoundation (6.7.2 - 635.21) <4D1D2BAF-1332-32DF-A81B-7E79D4F0A6CB> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
    0x98162000 - 0x9846cff3  com.apple.Foundation (6.7.2 - 833.25) <4C52ED74-A1FD-3087-A2E1-035AB3CF9610> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
    0x999db000 - 0x999dbfff  com.apple.Carbon (153 - 153) <6CB9BB2F-2707-3B9D-8F3F-0BFEEDE96494> /System/Library/Frameworks/Carbon.framework/Versions/A/Carbon
    0x9a61b000 - 0x9a629fff  com.apple.opengl (1.8.1 - 1.8.1) <766AFB12-A2CB-3A55-B662-FC9FFCAE0008> /System/Library/Frameworks/OpenGL.framework/Versions/A/OpenGL
    Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.06 GHz, 4 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 4670, ATI Radeon HD 4670, PCIe, 256 MB
    Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.67.5-P2P
    Bluetooth: Version 4.0.8f17, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Wi-Fi, AirPort, en1
    Serial ATA Device: WDC WD5000AAKS-40V6A0, 500.11 GB
    Serial ATA Device: OPTIARC DVD RW AD-5680H
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: USB 2.0 Hub [MTT], 0x1a40  (TERMINUS TECHNOLOGY INC.), 0x0201, 0xfd130000 / 5
    USB Device: Mass Storage Device, 0x058f  (Alcor Micro, Corp.), 0x6361, 0xfd133000 / 10
    USB Device: DYMO LabelWriter 400 Turbo, 0x0922  (Dymo Corporation), 0x001a, 0xfd131000 / 9
    USB Device: USB 2.0 Hub, 0x1a40  (TERMINUS TECHNOLOGY INC.), 0x0101, 0xfd137000 / 8
    USB Device: PTZ-431W, 0x056a  (WACOM Co., Ltd.), 0x00b7, 0xfd132000 / 7
    USB Device: composite_device, 0x04f9  (Brother International Corporation), 0x01e5, 0xfd134000 / 6
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: UPS CP1000AVRLCD, 0x0764  (Cyber Power Systems, Inc.), 0x0501, 0xfa140000 / 6
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfa130000 / 5
    USB Device: Apple Keyboard, apple_vendor_id, 0x0220, 0xfa132000 / 7
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 9
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
    FireWire Device: OneTouch III, Maxtor, 400mbit_speed
    FireWire Device: HDD, Iomega, 400mbit_speed
    FireWire Device: My Book 111D, WD, 800mbit_speed

    You didn't save the iWork trial.dmg  somewhere by any chance?
    You have not move enough parts of iWork over to the new computer. There are files in
    Users > your name > Library > Application support > iWork. Get the iWork folder
    MacHD > Library > Application Support > iWork '09. Get the folder
    To get into the users Library you have to on Mountain Lion in the Finder click on Go in the menu while pressing down the Option key.

  • Can't restore to 1 partition after bootcamp

    Ok so I ran into a weird problem, and after searching for a while I can't seem to find a solution.
    Can't find anyone else who has had the same problem either.
    I'm currently running a 2012 RMBP. I had bootcamp installed running Windows 7.
    Today I wanted to remove the Bootcamp partition to free up some space on my HD.
    So I went to Bootcamp Utility and selected the option to restore Mac to 1 partition and remove bootcamp
    After a while it gives me an error message, something like "cannot remove bootcamp partition or restore mac to single partition"
    Ok...
    But not the bootcamp partition is gone from the bootcamp utility. It's also gone from Disk utility and the Finder.
    But the space that the partition was occupying (about 20+ gigs) did not change.
    So it's like it's still there but I cannot erase it or get that space back for some reason.
    I've tried everything. I tried rebooting using CMD+R and going to disk utilities from there also. But the bootcamp partition
    doesn't show up at all. But the space it was taking is still there.
    Also in Disk Utility I cannot "erase free space", it's greyed out. I can't do anything. It's like the bootcamp partition is gone, but
    the space is still being taken up. So it was never really removed.
    I don't know what else to do. Any ideas? Has this happened to anyone else?

    I encountered the same, or very similar problem with my 2012 15" rMBP.  Upon trying to uninstall Windows 7 and its associated 60GB Partition via Boot Camp Assistant (BCA), some sort of error (dialog disappeared too quickly to recall specifics) apparently prevented completetion.  During my second attempt, the process appeared to stall at about 25-30% completion.  After the "progress bar" hadn't moved for 10 minutes, I quit BCA.
    My third attempt ended at the second BCA screen, as the initial three options (for installing Windows) were again available.  I thought perhaps I had actually erased the Windows Partition, but Disk Utility still displayed an unnamed 60GB Partition.  Unfortunately, resizing my boot volume to 768GB triggered a file system verification error, as did Mende1's thoughtful solution.
    Finally, after highlighting my SSD (not my boot volume Partition) and selecting "Verify Disk", the "Repair disk in Recovery Mode" error suspended Verification.  After rebooting in Recovery Mode (command + R after chime), repairing the drive in Disk Utility did just that, and I was able to simply resize my boot volume Partition, removing the empty partition.  I guess BCA had uninstalled Windows 7, but failed to remove the partition.
    Sorry for the longwinded post, but since the OP's solution didn't work for me, I thought I would share the process that worked for me.
    Michael Henk

Maybe you are looking for