Can no longer connect to internet wirelessly with Linksys WRT54G...

Hi, all...
I'm at my father-in-law's house. His home network setup is as follows:
* Compaq desktop connected via Ethernet cable to
* Linksys WRT54G, v3 (IP 192.168.2.1) connected via Ethernet cable to
* Westell DSL modem provided by SouthEast Telephone (his ISP - IP 192.168.1.1)
I set this equipment up for him about 18 months ago. His Compaq desktop connects perfectly to the internet, using the setup I described above, which I set up for him about 18 months ago. I *used* to be able to connect to the internet wirelessly (with both my IBM ThinkPad and my MacBook; my bro-in-law *used* to be able to connect to the internet wireless (with his Dell laptop).
For reasons we don't yet understand, neither of us can connect wirelessly to the internet any longer. I have called Linksys, posted to their board, and read other threads here, so I am aware that MacBooks have some issues with Linksys routers. I'm getting ready to phone my father-in-law's ISP, to see if they can help.
But... I don't understand why this used to work, but doesn't any longer. I would be very grateful for any help any of you great folks could provide, and I will gladly post here any detailed info on the setup that might be of help!
Many thanks,
Bill J.
MacBook 2.0 Mac OS X (10.4.8) iMac 17in Core 2 Duo 2.0, AirPort Extreme, AirPort Express, IBM NetVista M42

Thanks for your reply.
Actually the Linksys 2Wire modem works fine in OSX and when connecting via a Compaq PC I also have in the house. It is just on the MacBook running XP that it fails to "connect". XP see's the network but cannot connect.
Also, I downloaded again bootcamp and created a fresh driver CD, reinstalled the driver and received the same error: 1706 No valid source could be found for product Macintoish Drivers foir Windows XP.msi.
I looked at the directory on the CD and it appears that there are no driver files, only documentation.
I called Apple, got no help, called Microsoft, spent 1.5 hours talking to them
they were no help either.
I sent a messge to the bootcamp beta mail address informing them that it seems the drivers are not being downloaded with bootcamp.
Thx again.

Similar Messages

I can no longer connect to Xbox Live with my WRT54G

A few days ago I had to exchange my xbox for a new one. For some reason I can not get this new xbox to connect to Live at all. The error message I'm getting is saying that port 3074 isn't open. The fact of the matter is that port is open. I've tried every everything that I could think trying to get my 360 to connect to live. For some reason my new Xbox is showing up under the Other Devices tab in the ELA program (see picture below). Could that be the problem? My old 360 that I had to take back to Best Buy (RRoD'd on me 3 days after owning it) connected just fine to my WRT54G.
So, yeah. I have the needed ports opened, tried DMZ, tried all types of things that I found searching these forums and google. I'm at lose as what to do. Any help will be appreciatied.
http://img90.imageshack.us/img90/6883/xboxpj0.jpg

For X-Box :
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on "Applications and Gaming" tab and then click on "Port Range Forwarding" subtab...
1) On the first line in Application box type in ABC, in the start box type in 53 and End box type in 53, leave the protocol as both and under ip address type in
192.168.1.20 and check the enable box...
2) On the second line in Application box type in PQR, in the start box type in 88 and End box type in 88, leave the protocol as both and under ip address type in
192.168.1.20 and check the enable box...
3) On the third line in Application box type in XYZ, in the start box type in 3074 and End box type in 3074, leave the protocol as both and under ip address type in
192.168.1.20 and check the enable box and click on Save Settings...
4) Once you return to the set up page click on the Security tab and uncheck Block Anonymous Internet Requests and click on Save Settings...
5) Click on set-up and change the MTU Size to 1452 and click Save Settings...
6) Goto the XBox Network Settings and IP Address Settings and select manual IP Settings and assign the following on your Xbox
IP Address :- 192.168.1.20, Subnet Mask :- 255.255.255.0, Default Gateway :- 192.168.1.1...
7) Also assign the DNS Addresses on the Xbox
Primary dns :- 4.2.2.2...Secondary dns :- 192.168.1.1
8) Turn off your modem, router, and Xbox...Wait for a minute...
9) Plug the modem power first, wait for another minute and plug the router power cable, wait another minute and turn on the Xbox and test it...it will connect...

Since downloading iSO 5 i can no longer connect to a wireless network.

since downloading iSO 5 i can no longer connect to a wireless network. I have tried both at home and at other wireless hotspots. it would appear that none of the previous wireless connections work either? i just get the error "unable to connect to "x"
i have tried to "forget" and rejoin but that has not worked either.
what to do pleeeease?

Did you already try to reset the phone by holding the sleep and home button until the Apple logo comes back again?
Did you try to reset the network settings on your device?

Can no longer connect to internet w/ cell signal - advice?

Hi, all -
I can no longer access the internet using a cell signal on my Droid 3. Everything was working fine until about a week ago, but now I get no 3G signal at all and only one or two bars. When I turn on the WiFi, I have no trouble accessing the internet. I can make calls with no problem, but cannot access the internet or my apps.
I have tried the following, but I am still not getting a usable wireless signal:
·        - Restarted device several times
·       - Turned “airplane” settings on and off
·        - Removed battery, replaced it and restarted
·        - Dialed *228, then option 1 to activate service
·        - Dialed *228, then option 2 to reprogram service
Does anybody have any other ideas? I REALLY do not want to use the "nuclear" factory reset option unless absolutely necessary!
Thanks in advance for any help!

    dmiller28, being without data is very difficult! Your efforts are greatly appreciated and you are on the right track with the troubleshooting steps. Have you tried checking the network settings in the device? To do this you will go to: menu>settings>wireless and networks>network mode and check if it is set to CDMA. Otherwise the next step is to do the factory reset which will be the last resort option. Keep us posted, thanks!
WiltonA_VZW
VZW Support
Follow us on twitter @VZWSupport

Can no longer connect to encripted wireless.

Hello,
I am running a wired and WPA TKIP Encripted wireless network through a WRT350N and Netopia DSL modem. I have a Western Digital Mybook Premium 500GB hard drive connected for storage.
The system had included 2 XP Home PCs one using a Linksys WMP54GS Wireless PCI adapter and the other using a Netgear “G” USB adapter configured through Windows since the Netgear software would only do WEP. There are also 2 laptops one being an older model with the Linksys “G” PCMCIA and a newer Core2Duo using Intel Proset.
February I built a New PC which I connected via CAT5 which required moving the WRT350N, modem and 500GB MyBook into the computer room. In this room we also have our Dual mode 2.4 Ghz Linksys CIT300 Skype phone and our 2.4Ghz main phone. The new PC also has a Logitech G7 mouse using 2.4Ghz wireless. Everything ran smoothly for just over a month.
Around the same time as the start of the network connection Issues I swapped the Motherboard in the New PC with an SLI version and set the machine back up still using CAT5 and no wireless.
I cannot say for certain that we didn’t have any issues before the time of the swap but it did become very noticeable around the same time and I just want to cover all the bases.
What happened is the wireless PCs slowed down a bit and then the Netgear connected PC started to have disconnect issues that were very noticeable since it was the machine that pulls our e-mail. We then noticed the Linksys G Desktop having connection speed issues and then finally all the wireless machines will no longer connect via encrypted wireless at all. If I reset the Router they connect without a problem. I can change the SSID and turn off the SSID Broadcast without a problem but the moment I turn on WPA Personal, TKIP, and set a password they all lose connection and will refuse to connect. I have sat down at each machine and deleted the wireless profiles and set them up with all the same SSID, Security, and keys but they will not connect.
I even ran Net Stumbler on my Laptop to look for other wireless networks but only find one on Channel 11. Mine shows up too but at Channel 1 using the 40Mhz channel. Network mode is set to Mixed, Radio band is auto, Wide Channel is auto, Standard channel is also Auto.
Is there anything else I may be missing? I have reset the router many times and have tried restoring from saved configurations but nothing works at all. The only thing that works now is the wired connection. L
I sure hope Linksys reads these forums because they sure do not read their tech support e-mails!
I look forward to any help.
Thanks,
Martin

First of all, re-download and re-install the latest firmware for your router. After installing the latest firmware, make sure you reset the router to factory defaults, then set up the router from scratch.
Next, make sure you have a unique SSID (don't use "linksys" ), and turn on SSID broadcast. Turning on SSID broadcast makes it easier for your computers to find and stay connected to your router. I used to recommend that SSID broadcast be turned off for security reasons, but this is no longer required because new "cracking" techniques have made this old trick useless.
As a test, turn off all your 2.4 GHz devices and unplug them from the wall. This would include your phones, wireless mouse, and any Bluetooth, wireless baby monitors, microwave ovens, wireless keyboards, etc. Also, turn off any 5+ GHz phones, as some of these also use the 2.4 GHz band. See if this makes a difference.
Since your Netgear "would only do WEP", I don't understand how you ever got it to work before with WPA encryption. Please explain. Are you saying that the Windows software was doing the WPA for you?
Update you computers with the latest drivers for your wireless adapters.
As infinityx mentioned, update Windows XP to at least SP2.
It sounds like you may have the Intel Pro Wireless 2200bg card. If so, this card is known to have connection problems. The problems with this card worsened with a recent Windows update, but were fixed with the latest driver. Go to the Intel web site and download and install the latest drivers.
Also, you can try another channel on your router. Since you have a neighbor on 11, try any channel 1 thru 6. (Always try to stay at least +5 or -5 channels from your strongest neighbors.).
Message Edited by toomanydonuts on 03-16-200704:01 AM

IMac G5 isight Can No longer connect to internet over Airport

I have an iMac G5 that has been working fine on my Airport Extreme wireless network for 3 years. Suddenly, I can no longer access the internet over my Airport connection. The computer is on my local Airport network wirelessly (I can access it from my laptop and share files). I can connect to the internet from 4 other computers connected to the same wireless Airport network (2 MacBook Pro's, 1 Powermac G4). In addition, if I connect my iMac to my laptop via a twisted pair ethernet cable and turn on internet sharing on my laptop, my iMac can connect to the internet. All systems are running 10.5.5 and no firewalls in place. I checked my internet preferences and they have not been changed from what they were before when it was working. DOES ANYONE HAVE ANY IDEA WHY SUDDENLY IT STOPPED CONNECTING TO THE INTERNET OVER MY WIRELESS AIRPORT CONNECTION?

I have just experienced the same situation. Everything was working fine and now I can't connect to my airport from my macbook pro. I also have an iMac G5 working perfectly well on the same airport.
Could it be a latest update that has caused the problem?

Can no longer connect to Airport Express with upgrade to iTunes 10.1

Since I upgraded to iTunes 10.1 I can no longer connect to my Airport Express (unknown error-15000). Another computer on my betwork running an older version of iTunes still works on the Airport Express.
Any ideas? I have tried to uninstall and reinstall airport express with no success.

Rather than disabling the firewall, try making sure you've got exceptions in it for BonJour. Although the following document is about a different error message, the instructions in there are worth trying. (At step 7, make sure there's an exception for BonJour as well.)
[iTunes for Windows: Bonjour alert due to firewall, security, or proxy software|http://support.apple.com/kb/TS3448]

Can no longer connect to my wireless router in my home

Can no longer connect my ipad to my wireless router in my home

Have you tried rebooting the router? Unplug it for about 30 seconds and then plug it in again.
Turn Wifi off and on on the iPad? Reset the network settings? Forget the Network?

Can no longer connect to internet with wireless router.

For almost a year I've had a wrt54g ver 6 connected on my computer with my cable modem and my sons computer with the compatible pci card. Everything worked fine until a few days ago, I came home and could not get on the internet with my computer. My son could, but not me. I didn't change anything at all. So I reinstalled the router drivers and I still can't connect to the internet, but now neither can the other computer. What could be the problem?
michele

it sounds like you might have to clone the mac address of the computer that was originally connected to the cable modem. clone mac address can be found on setup tab after log into router.

Can't connect to internet wirelessly with WRT120N router

ok, it's nearly 4am and i've been trouble shooting this problem since 11pm... love the technology, but it completely evil...
let me start off by saying i'm not too tech savy. took a couple computer courses in high school and thought it was my passion but they got way above my head in college, so i settled for art (those classes are much easier to pass as long as you draw your homerwork, don't blow up your sculpture etc etc)
anywho, i bought a brand new computer today since i play wow and my old computer was nearing on a decade old and had nearly a dozen manufactury resets from all the viruses from downloaded music. i don't know the make of the new computer (just spent like five minutes looking over the box and it doesn't seem to say) and i literally walked into best buy and walked right up to the computer department store head and said, "which computer should i buy to play wow on for less than $600." he thought for like thirty seconds and pointed to an ASUS and i immediately bought it. took it home, watched tv for a couple hours, then went to set it up since i had a raid in like two hours, thinking, "brand new computer, nothing's gonna go wrong!..."
well it did. my router gives me grief from time to time, so i spent the first hour unplugging, resetting, refreshing (i think that's what the button by the blue lights that has the circling arrows does) and nothing. so then off to the interweb since... oh! this might be important! the one computer i'm on now that has a hardwired connection is running normally, not great, normally. and i just checked my mom's ipad, it's on the network too. my phone, a samsung galaxy s 4 had been connected since i had it, and decided to stop connecting when at least until i noticed i couldn't connect my new desktop and my gf's phone, an iphone 4 wouldn't connect either... in total, i think there's one wired desktop connection, my fail wireless desktop connection, wireless laptop that hasn't been opened in months, an at&t signal booster, an ipad, and 4 phones that connect when they feel up to it. my old iphone 4 i ran on 3g because it was more reliable than my wireless. there's never more than 3 devices running at once. i've seen a few threads mentioning too many devices on one network. could that be it? i hope not. we have comcast as a provider too, if that helps.
oh, and maybe i should describe my problem more clearly. on my phone, when i go to the wifi settings, it still list my network as one i'm linked too, it's just "not in range" and my new desktop can't see it at all. pretty sure it's not a hidden ssid because i connected my phone to it recently and had no probs. also, i'm fairly, but by no means 100%, certain that it's not the wireless card in the computer because i can see a few other networks and my phone had already been on it without giving me problems until earlier today.
if you know how to help, please be thorough in explaining it, and if i need to give more info, i'll try my damnest. please please please!!! help me, i spent all my money on this **bleep** computer and don't have anymore to buy another new router.

Hi there. To start, that blue button that you have been pressing on the router is the Wifi Protected Setup button. You press that button when you want to connect a new wireless device that supports Wifi-Protected Setup to connect to the wireless internet via your wireless router without having to enter anything on the new wireless device. So it means, you did not reset the router. I would like to verify with you though because it is not clear to me (sorry), how do you want your new desktop computer to work? Wirelessly or with Ethernet cable plugged-in? If it is for wireless, you will only need to connect the computer’s wireless connection to the router wireless network and to enter the wireless password if you have wireless security enabled on the router. Also, the router should be able to provide simultaneously internet connection to multiple devices – be it wired or wireless. Sometimes the reason why the wireless would not work is when there is wireless interference in the area that you will need to change its wireless channel to something else. To have wireless security enabled on the router is helpful as well in making sure that the router will provide a better connection speed.
You might find the articles below helpful:
Title: Troubleshooting iPhone® and iPod® wireless connectivity to a Linksys router Article ID: 22078
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=379d252f42cf4f14acff14214efc6f5a_Troubleshooting_i...
Title: Setting up wireless security on a Linksys router Article ID: 4024
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ae7725e2224549b7ac82a8a00df3cdc7_4024.xml&pid=80&r...
Title: Top causes of dropping wireless connection on a Linksys router Article ID: 22110
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=efc03a44a5bb47bd804cf4d0eb3015c8_Top_Causes_of_Int...

Can no longer connect to internet on my iTouch

I have had my iTouch for just over a year and had no problems connecting to the internet at home and elsewhere. I had to purchase a new router recently and now my Touch no longer connects. It finds the network with no problem but when I enter my password it still says "unable to join the network..." It works everywhere else just fine and my laptop at home connects to my wi-fi with no problem as well. I have tried to input my network under "Other networks" with no success either. My settings and password are the same as before but it still won't connect. Has anyone else had this problem and any ideas on how to fix it? I went to the Apple store and they said they had no idea why it no longer connects. Thanks for any help you can send me.

Are you running WEP encryption? Chances are the new router interprets your password in a form that the touch can't deal with. You can either using the hex code in place of the password you created or reset your encryption to WPA2-psk and create a new 10-12 character password.
If you don't want to change encryption, you can reconfigure your WEP passwords - 5 characters only with 48bit or 13 characters only with 128 bit.

Can no longer connect to my wireless network started today

every time i try to connect to my network it says connection timed out. i can connect using cable... and my windows laptop is connecting to the network wirelessly. Any sugestions

Be careful…
There are two pieces to connecting to a wireless router, getting connected to the network itself and getting an IP address.
If the AirPort icon shows you as connected that means you are connected to the network (and any passwords required have been accepted); the self-assigned address means you haven't been able to get an IP address from the DHCP server on your network.
If that's the case, the next question is why, and to figure that out you need to know who normally assigns IP addresses on your network - a cable or DSL modem, some other machine, a wired router or your wireless router - and try and debug things from that end.
I've mentioned before cable modems as an example; they typically only assign one to three IP addresses and often need to be power cycled before they will assign any more. This is cable companies' way of having multiple hosts slam the modem with data; if you have to have another router in the path the router to modem link becomes the bottleneck, not the modem itself.
So the next question is who is responsible for assigning IP addresses (via DHCP) on your network?

Guest Ipod touches and husband's iphone can no longer connect to internet with airport. But Ipad2 works and so does hard wire computer. where is the problem and how do we remedy

WiFi connections no longer working on Iphone and guest's Ipod Touches. How do we remedy this problem. The Ipad2 and hardwired computer are working with no problem

I had the same problem -- only iphones couldn't access wifi all of a sudden. I solved it this morning by uploading a previous firmware version to my Time Capsule. The solution was offered in a different discussion in the iphone section, which I found at https://discussions.apple.com/message/15180888#15180888 :
Eureka thats the problem
The iOS 4.3.2 and 4.3.3 for iphone is not compatible with the firmware 7.5.2 for apple airport extreme and time capsule. If the WiFi router is an apple airport with firmware 7.5.2 an iphone with the updated firmware will not be able to detect and connect to the WiFi network.
Solution The iphone firmware can not be downgraded, the airport firmware has to be downgraded
1) Make sure that the settings of your Airport Extreme are in mixed a/b/n mode
2) Open Airport Utility
3) Select Upload Firmware from the BaseStation menu
4) If you current version is 7.5.2, click Upload Firmware
5) Select 7.5.1 from the pop up menu
6) Restore Firmware
Now the WiFi network is detected and connected perfectly as before upgrading the iphone to 4.3.3.
The solution was found herehttps://discussions.apple.com/message/15170990#15170990

TS1398 I changed my password on my wireless home router. Now I can not connect to internet on iPAD. I know I have to change the password on the iPad but I do not know how to do that. I can know longer connect to my wireless.

I am new at using an Ipad. My Ipad was connected to my home wireless. I changed the password on my home router and now I do not know how to change that password on my I Pad. Can someone help me?

Tap settings on your iPad
then tap Wi-Fi
click on the blue arrow which is next to the network
a new section will be opened
it will display the router settings and all ( you dont have to deal with it)
then tap forget network at the top
go back and tap your network
iPad will ask the password of the network just enter the new password and you are good to go
if a message appears unable to connect just go back turn Wi-Fi off then start it again
and try connecting to it again
i hope this will help you if not reply me and ask me for more questions.......do reply if it worked

Can no longer connect to internet since express intalled!

Hi
Been trying to configure my AE for iTunes and seem to have buggered up my general wifi settings. My router has not changed (since all my other mac's can connect OK), but the machine I was configuring AE on just says:
"Airport is connected to the network xxxx. Airport has a self-assigned IP address and may not be able to connect to the internet"
It is set to DHCP, but keeps getting one of those useless 169.x.x.x addresses instead of the 192.x.x.x ones. I have no changed the router at all.
How do I reset my airport connection?
Shaun

To set up AirTunes on the AirPort Express Base Station (AX), connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, use the AirPort Admin Utility to check these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select the existing wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

Can no longer connect to internet wirelessly with Linksys WRT54G...

Similar Messages

Maybe you are looking for