Can no longer dual boot after upgrade

Hi I used to run mac osx 10.7 dual booting with ubuntu 13.04. I used to press alt at startup to view the different partitions and select the appropriate OS. After upgrading to 10.9 I can no longer see the ubuntu partition when pressing alt. The disk is still there intact, but there is no way I can directly boot to it from startup. I tried creating another partition using disk utility and installing a fresh copy of linux and using the old linux partition as backup but whenever I select the ex-fat (or any other type for that matter) (for linux) I get:
File system resize support required, such as HFS+ with Journaling enabled.
I erased osx 10.9 and reset to factory settings back to 10.8 but the same problem continues.
I am not sure what to do to get dual booting working again. I do have an ubuntu backup on an external drive, but I would prefer not reformatting that partition.

I don't know why you couldn't repartition the disk using Disk Utility. You would have to provide more information about why you can't.
As for OPTION booting Ubuntu I'm not sure how that worked. Typically Ubuntu installs the GRUB bootloader/manager that provides a text menu from which you select which OS to start. GRUB replaces the OS X boot manager.

Similar Messages

HT4818 I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, it wants me to delete it. If I create it in either Windows or Mac OS X afterwards, I can no longer dual boot.

I want to have an exFAT parition in addition to the Mac OS X and Windows partition. If I create it before running BootCamp, BootCamp wants me to delete it before continuing. If I create it in either Windows or Mac OS X after running BootCamp and installing both OSes, I can no longer dual boot. What is the magic sequence to get this to work?

I've got the same quandary.
After upgrading my hard drive to a Momentus XT Hybrid and doing a clean install of Mountain Lion, I was surprised that I couldn't format partitions separately and then restore from my clone of the old Windows 7 Partition. I found that I had to use the BootCamp Assistant to manage it all, which essentially meant getting rid of the partitions and starting again...
I now can't get my Windows / BootCamp partition to boot, after adding a 3rd, ExFat, partition, when it was working perfectly fine before. I just get a lot of dos booting failures and a final message that "No boot device is available, press Enter to continue".
See the attached message, that I get when trying to boot the bootcamp partition, through Parallels 7; which also worked perfectly fine before.
Be good to know if there is a work around this in Mountain Lion as, if not, I'm thinking I might skip Bootcamp altogether and just install a machine drive via Parallels. As suggested here:
http://forums.macrumors.com/showthread.php?t=1420754
I might even keep the virtual windows machine on a separate hard drive and then I'll have no need for the ExFat partitions altogether as that was designated for sharing between Windows and Mac.

Can no longer use pages after upgrade, even after three restorations! Huge inconvenience!!

Can anyone help me with why I can no longer use pages after the latest upgrade to iOS 7.04. I have restored my ipad three times and it still won't work. It s ahuge inconvenience when all my documents are on pages. If you can get back to me as soon as possible that would be great!!

Turn off iCloud for Pages on your mobile device at Settings > Pages > Use iCloud > Off.
Open Pages on your computer and move any documents in iCloud to your desktop for safe keeping.
Navigate to system preferences > iCloud > Manage and check that Pages documents are not taking any space in the cloud, delete them if they are.
Enable iCloud syncing for Pages on your mobile device and launch the App.
If Pages now opens properly, start to add back documents from your desktop one at a time (or in small groups if you have many).

Problem with dual boot after upgrade to Mountain lion

Hello Every One,
I have a Macbook pro from 2009 which had dual boot option Windows 7 + Snow Leopard.
The windows 7 had 2 partitions (C; and D: an extended partition).
I upgraded the OS X to Mountain lion. after upgrade the system showed 3 options at boot time. Mac, Windows and a recovery partition.
when i boot to windows the D: drive is gone...I mean even though i can see the partition in partition software, windows 7 stopped showing D: in "My computer".
So i used testdisk utility to get the D: drive back and now when i boot to mountain Lion i am able to access both C:(BOOTCAMP) and D: drives.
but now the problem is during boot time my Mac Book pro doesn't show the windows option.
Can some suggest a means to boot into windows 7? Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it so that i can go back to my old configuration of 3 primary partitions (1 for windows 7 ...C: bootcamp + MountainLion) + 1 extended partition for D:
any help would be appreciated?
Regards

Ragu79 wrote:
Also what is the purpose of recovery partition that Mountain lion adds to the system? I mean is it going to hurt if i get rid of it
Leave it: http://support.apple.com/kb/HT4718

Dual boot after upgrading to 10.4?

My parents use a summer 2001 slot loading iMac G3 that can boot either into OS 9.2 or OS X. I'd like to upgrade their computer to 10.4.
I know I'll need to add RAM and do the firmware upgrade first.
WIll their computer still be able to boot into 9.2 if they need to for some older software? Or will they lose the dual boot capability?

Hi
Yes, any Mac that has the ability to boot into OS 9 will retain that ability no matter how far you upgrade OS X.
Best,
Matt

Can no longer find printer after upgrade to 10.6.7

I recently upgraded to 10.6.7 and now I can no longer find our network printer.
I am connecting by ethernet to a Konica Minolta IP-432 PS. I have updated the printer driver.
When I go to system pref to add this printer it is no longer being "found" .
Any help would be appreciated.

Hi,
I need to configure a copier konica minolta 7145 with IP-432 on Mac OS X 10.6.7.
the copier has never been used before on this computer, can you tell me how to print with the Konica on mac, which drivers to install, what kind of cables and which procedure.
Thanks a lot!

Can't activate secure boot after upgrading from Win 7 to Win 8 on a Spectre XT

Hi everybody,
my first post here, so please forgive me if the topic has already been discussed
I did search before posting anyway, but I couldn't found anything addressing this specific point.
My (small, I must admit) problem is as follows:
I recently purchased a Spectre XT 13-2005tu (i7 processor, 4Gb RAM, 256Gb SSD) with Windows 7 pre-installed.
After installing my favourite applications and using it for a few weeks without any trouble, I thought to take the opportunity of the $14.99 upgrade to Win 8, so I downloaded Windows 8 Pro and installed it (as an upgrade, rather than a fresh installation, because I didn't want to loose the customizations I already made).
I also installed all the updates available on HP website (sp59158 for updated BIOS, sp58404 for UEFI support, ecc.)
The whole upgrade worked nicely, and the PC is now up and running with Win 8.
Now, I'm trying to use at best all the possibilities Win 8 has to offer, and among them, the UEFI secure boot.
I found the "legacy support" option in the BIOS settings, which as I understand must be disabled to activate the UEFI secure boot, but if I do that the PC tells that there's no operating system on the disk and doesn't boot anymore.
Which was a bit scary by the way, but eventually I could re-enable the legacy support in the BIOS and have the PC working again, but of course with no secure boot.
I suppose there must be some other re-configuration that should be done before changing the BIOS parameter, but I couldn't find any instruction for that anywhere on the web.
On the other hand, it would be indeed weird if the secure boot could not be configured AFTER the OS upgrade, and a new fresh installation would be necessary.
I'd rather part with the secure boot than re-install everything, but that would be a shame... :-(
I hope someone can explain what should be done, many thanks in advance!

Thanks for your feedback, but I don't think your issue is the same as the one I previously explained.
The UEFI/secure boot setting is a basic configuration affecting the way the PC boots, regardless of whether it is connected to a network or not.
By the way, in the meantime I've seen in a shop exactly the same PC model which I'm using, now sold with Win 8 pre-installed, and it was working with the UEFI enabled (= BIOS "legacy support" disabled).
Therefore, the configuration I'm interested in has to be feasible, one way or another...!

Can no longer echo brightness after upgrading intel-dri and libgl

I just upgraded these two packages for my Intel HD 3000:
[2011-11-29 17:13] upgraded libgl (7.11.1-1 -> 7.11.2-1)
[2011-11-29 17:13] upgraded intel-dri (7.11.1-1 -> 7.11.2-1)
And afterwards this file into which I used to echo brigthness values has disappeared:
/sys/class/backlight/acpi_video0/brightness
I failed to find any relevant information on http://dri.freedesktop.org/.

Dear Ernie,
Thanks. Tried this but mail still crashes. I get a bit further, can click on sent mail and can sometimes reach one e-mail before the system crashes (heavy hard disk access, whole system slows, and eventually I get the message - Mail Unexpectedly Shut Down).
Would it make sense to go a few days back on time machine and restore an earlier entire mail folder? (I have a few days of mail on the server even on my normal POP accounts).
Let me know if there is anything else I can try.
Charles

Can no longer send mail after upgrade. Says server needs password. Server says down not support a password. Any thoughts?

After up grade I can not send mail from road runner account. Message says server needs password, server says it won't support a password. Any thoughts?

UPDATE: I was able to set up the account using Eudora, and it worked fine. I guess it means that there's something funny happing with Mail.

For Those Who Can't Boot After Upgrading To 10.5.6

For Those Who Can't Boot After Upgrading To 10.5.6
(and i am one of those)
how is Apple supposed to make them able to install future fixes and updates
once they finally acknowledge and address this horrible bug?
will they send free bootable CDs with the updates to 10.5.6?

What "Boot ROM version" do you have (check in the system profiler under "Hardware")? If it's not MBP31.0070.B07 or MBP21.00A5.B08, then you will need to update your MacBook Pro's firmware. To do this, you might need to connect an external display and mouse/keyboard, and then run the computer with the lid closed to bypass the laptop's monitor. Then apply the firmware patch and reboot the system. This might also be doable via "Screen Sharing" if you have that enabled and have another mac handy.
The firmware update is here: http://www.apple.com/downloads/macosx/apple/firmware_hardware/macbookproefifirmw areupdate151.html
Message was edited by: Topher Kessler

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

I have an older computer and can no longer update. After the latest Apple update I can no longer access my e-mail on my mac. I can view it on my iphone and on icloud. Is there a solution to this problem?

Apple changed MobileMe to iCloud and then restricted iCloud to 10.7 users only unfortunately
If your machine is a 64 bit processor Intel Mac you can upgrade to 10.7 for $29, however a lot of your 10.5/10.6/Rosetta based software could cease to function, especially third party hardware drivers for printers, fax machines, all-in-ones, scanners etc.
http://roaringapps.com/apps:table
Also depending how old the machine is, if it can accept 4GB of RAM (preferred), older video card, may not run 10.7 very well or stable.
My advice is to keep at 10.6.8, get a web based email service that's plaform/hardware neutral, forward your iPhone emails there. Gmail/Yahoo Mail for instance.
When your ready for new hardware and all new software, then buy a new machine.
If your going to go to 10.7 on your present hardware, I advise you clone 10.6.8 to a external drive first, that way you can c boot off the 10.6 disk erase the drive completely (necessary to remove hidden Lion Recovery Partition) and option boot off the 10.6.8 clone and reverse clone.
http://www.bombich.com/get_ready_for_lion.html

Mac pro cannot boot after upgrade to 10.8.3

My Mac Pro cannot boot after upgrade to 10.8.3. Anything firmware I can reset or how should I do.
I am using a early 2008 Mac Pro

Can you boot into safe mode? http://support.apple.com/kb/ht1455
If not, how about Recovery? http://support.apple.com/kb/ht4718
If you can, run Disk Utlity and repair the disk. You can try rebooting normally, but I would just reinstall after quitting Disk Utility.

Can't print in PSE11 after upgrading to windows 8.1

I have just upgraded from Windows8 to 8.1 and now can't print in PSE11. For some reason can in PSE7

I can print from other programs but not PSE. I have updated the drivers. I have attached 3 screen shots with error messages.
Tracy Ferreira 2607 Woodruff Rd.
Suite E-126
Simpsonville, SC 29681(864)350-4724www.onthespotportraits.com
From: hatstead <[email protected]>
To: Tracy Ferreira <[email protected]>
Sent: Tuesday, March 10, 2015 1:58 PM
Subject: can't print in PSE11 after upgrading to windows 8.1
can't print in PSE11 after upgrading to windows 8.1
created by hatstead in Photoshop Elements - View the full discussionWhat happens when you try?Any error messages?Do you have the latest drivers for the printer? If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7274523#7274523 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7274523#7274523 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I can't update my apps after upgrade to iOS 6...?

I can't update my apps after upgrade to iOS 6

Are you sure you have a proper Internet connection? Make sure your iPod is connected to your computer, and you have an Internet connection.
Don't even get me started on the iPod Touch 5G, I actually own an iPod Touch 4G, and I've considered a lot about if I should get the new one. At first look, you might be sold by the features Apple has on their iPod Touch page. It has a taller screen that's a 4-inch Retina Display, has a much better camera with a flash, and comes with iOS 6 preinstalled with Siri. But the real breakthrough comes with the new connector. It's called Lighting, and it's much smaller. But if you have a dock connector that comes with some cars, and maybe a set of speakers or docking stations as alarm clocks, I encourage you not to get the new one. The usage of your old connectors requires a $30 adapter, which is a ridiculous price. And who knows how secure the adapters will be with your docking stations? I personally think Apple has crossed the line. If they are to put a new connector with their new products, they should ship with an adapter in the box, at least at first. This is why I strongly encourage you NOT to get the new 5th generation iPod Touch.
Sorry if I went a little off-topic there, but I wanted to get my point across. For your updating to iOS 6, I reccommend you check out other discussions in the support comunity, and see what other contributors have to say. Or go on Google and search your error messages, possibly someone might've already went through the same problem as you did. I really hope this helped!

Can't to connect WiFi after upgrade to 10.7.1

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

My MBP can't connect to WiFi after upgrade the firmware from 10.7 to 10.7.1 today. How can I solve this problem ?

Can no longer dual boot after upgrade

Similar Messages

Maybe you are looking for