Can no longer get into BIOS, always goes to system diagnostics

After changing some settings in BIOS the system won't boot anymore.
But the real problem is that I can not get into the BIOS anymore. When started the system goes straight to System Diagnostics.
When I continue I get the message:
BootDevice Not Found
Please install an operating system on your hard disk.
Hard Disk - (3F0)
When I go to the startup menu and try to enter Boot Device Options(F9) or Bios Setup(F10) it still takes me to System Diagnostics.
The system passes all system diagnostic tests.
I don't understand why I can't get into the BIOS anymore, this should always be possible right? How can I fix this?
Any help is greatly appreciated.

@WB__ 
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Similar Messages

  • I can no longer get into my WRT150N1.1 router any longer since I switched to Clear

    I switched to Clear wireless a few weeks ago and I can no longer get into my router to change the settings. This is a bummer because I now no longer have a secure connection. 192.168.1.1 no longer accesses the router, and I checked my IP address and it is (for clear I assume) 192.168.15.3. So I tried using 192.168.15.1 and it took me to Motorola WIMX CPE, (which I am assuming is the Clear webpage)
    I am on a Mac running Intel chip. Any help would be appreciated.
    Have tried getting in from my Ipad without any luck.
    Thanks

    The trick to make this work is
    hold down the reset button for about 30 seconds, then unplug the device, while you are still holding down the reset button.
    leave unplugged for about 5 seconds, while you are still holding down the reset button.
    plug the unit back in, while you are still holding down the reset button.
    after about 5 seconds, let go off the reset button.
    go to the webpage of the router.
    Now you can try to access the setup page of your Router, i think this should work and you should be able to access the setup page of your router and able to make the changes on your Router.

  • I can no longer get into my Hotmail.

    I can no longer get into my Hotmail. I am using OS 10.8.4 with Safari as a browser. I get an error message saying Safari cannot find the server. My Hotmail account is very important to me. Please help.

    PerCarolyn's suggestion I deleted all cookies but this did not solve the problem
    The error message is "Safari can't find the server. The server is
    http://by172w.bay172.mail.live.com

  • I think I updated to a newer version of firefox, I can no longer get into my gmail account . I can get onto google however. I deleted all cookies also. What have I done wrong? I didn't have this problem before.

    I can no longer get into my e-mail account on Google. I tried to update my version of Firefox. I also deleted all cookies in Google. When I click on Firefox, it opens to my Google home page. Then when I click on "gmail" it keeps repeating "redirecting" and does no more. What did I do wrong or forget? Help!

    check this
    https://support.mozilla.com/en-US/questions/835441#answer-200175
    Now try this solution
    https://support.mozilla.com/en-US/questions/836263#answer-201266
    Check and tell if its working.

  • How do I know what version of firefox I am using? Versions higher than 3.6 are incompatible with k12 online school and I can no longer get into Elluminate Live sessions.

    Ever since I updated Mozilla Firefox on my computer,my address bar disappeared. Also, I can no longer log into Elluminate Live sessions.

    Check your PM '''Inbox''' at the top of this thread.

  • Laptop Booting issue (can't even get into Bios)

    Hello all, I had a problem in my laptop from past week... My laptop does'nt booting properly even to bios. When i switch it on just a black screen for awhile and later its automatically switching off after heavy heat up. Sometimes i could able to boot it correct and thats the problem,Can't able to find exact problem though sometimes its working fine and most of the times not booting up. Please help me with it.Hard disk is fine have check it by connecting in someother system.

    Thank you for your reply... Whenever i press the power button their is no sign in display and if i let it go after 5 minutes i feel heat in fan side and middle portion of the keyboard and switches off automatically..but for surprise sometimes it works well boots up normally as before and starts working but most of the time i am struggling to get booted .. I tried all combination of power button tricks like removing battery and holding power , press power 5 times and even i removed RAM and cleaned and placed it again but still got the same problem...Please help me with this...

  • Can no longer get into ITUNES

    Getting message "The Itunes folder cannot be found or created and is required. The default location is inside My Music folder." I have unistalled and reinstalled Itunes and get the same message. Any suggestions?

    Your library is safe from the process, but you ought to be routinely backing up anyway.
    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • My ipad will not connect to App Store plus I can no longer get into my bingo app.  Do I need to restore my ipad, and if so, if I back it up, will I still keep all my levels completed on my apps or will they start from the beginning?

    Please help, I an unable to update any apps on my ipad through the App Store. It will not connect. Also, I am no longer able to log in to bingo bash app and my towers app will not connect either. If I restore my ipad will that fix the problem and if so, will my apps return to levels I am currently on? Ex. Level 346 in candy crush or will I have to start it all over?  It worked fine until we left a week ago for vacation and would not work on hotel wifi. Did not work when we returned home.

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows
    It still could be cable or contacts in the iPod since different contacts/conductor are used for charging and data

  • I can no longer get into my msn account through Firefox; this happened yesterday after I was advised to delete all cookies. I now see "you have chosen to open default.aspx" and can't go further.

    I have very little computer knowledge, so need step by step instruction of how to get back to msn through Firefox. Also, what version of Firefox do I have? I don't see where this info is, and am not sure if I need to update my version. Thank you.

    check this
    https://support.mozilla.com/en-US/questions/835441#answer-200175
    Now try this solution
    https://support.mozilla.com/en-US/questions/836263#answer-201266
    Check and tell if its working.

  • Help, I can no longer get into my network settings!

    There's a message on the screen that says: "Your network settings have been changed by another application." And an "OK" button. Every time I click the button it just pops up on the screen again. I ca close the window if I do everything just right and press the "Enter" key and click the < arrow really fast. But every time I come back and click on my Network settings that message pops up again. Does anyone know what I need to do to fix this?

    Of course, the problem is still there. Now that I've gone back in to the Network Settings the message is back. I've tried deleting the Network setting and making another one and I'm still getting the same message that something has changed my settings.

  • I have been trying to download the itunes update.  1.  I keep getting a runtime error.  i have researched and tried to the errors but can no long get into itunes

    I have been trying to update itunes but i keep getting a runtime error.  i have been working on this for 2 hours and cannot find anything in the community to help

    Solving MSVCR80 issue and Windows iTunes install issues.

  • Cannot get into BIOS using F1 or Enter

    I'm at a complete loss here. Brand new T430. I changed the settings in BIOS to UEFI and installed Windows 7 x64 successfully. But I can no longer get into the BIOS. F1, F12, Enter nothing works.
    Please help!
    Thanks much!!
    Solved!
    Go to Solution.

    Hi someotherguy,
    Can you help me with this problem?
    I hit enter to stop the normal boot and then appear a window to select different options:
    - F1: Enter BIOS
    - Another one I don't remember
    - F12: Select bootable device
    Any of the menus I've tryied to enter I got a message afterwards saying:
    "Intel Boot Agent GE v1.3.81
    PXE 2.1 Build 091 WfM 2.0)"
    And just stays there. Nothing happens.
    After pressing F1 or F12 or other, I got a small message saying press CTRL+S to enter the setup menu. If I press it, I enter in a menu just to change the amount of time that message appear and if I want it or not.
    Can you help me?
    I need to activate the virtualization on the BIOS in order to setup virtual machines!

  • Can't get into BIOS mode

    ** i also put this question in O.P. topic, because i think that was the wrong one**
    1. Type of computer - HP ENVY dv7-7250nr 
    2. opporating system- windows 8 64bit
    I recently got this computer. It's amazing the only thing that could use a change is the keyboard. I got this as a gaming PC but the function keys can only be accesed when pressing FN. In most computer games the f# keys are your shortcuts. When i go to press mine i have windows changed and the control panal pops up.
    So i was looking around and they say you can go into BIOS mode and turn off the hotkeys. Only issue is i can't get into BIOS mode. 
    I would really appreciate some help on this, i don't want to go out and key a whole-nother keyboard.
    Thank you in advance. 

    Princess.
    Turn on the laptop then tap f10.
    That should get you into the BIOS.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

  • Z68A-GD55 can't get into BIOS anymore

    Just built new Z68 computer gradually over 3 days. Then loaded applications and everything worked great for 2 days. Decided it was done and time to change boot priority in BIOS. Couldn’t get into BIOS. Got splash screen but no further.
    Found forum message recommending CMOS reset. Tried button, jumper, remove battery methods. Still can’t get into BIOS. Get BIOS Prompt ("...press DELETE"), but nothing after that except flashing cursor top left of screen. Back to barebones; same result.  Screen messages before BIOS prompt: 98, 99, A3. Will not boot MS DOS (Win98 version) from USB drive (would before). I’d appreciate any suggestions. Thx.
    Key build steps:
    • Ran Memtest  barebones 48 hrs.
    • Added SSD (ACHI) and Installed Windows 7 Pro. SSD was new.
    • Added, formatted HDD
    • Enabled multi-monitor in BIOS; added Radeon HD6870; 2 monitors on Radeon, none on internal; installed Radeon drivers.
    • Enabled Virtu in BIOS, d-mode; Installed Virtu
    Not overclocked.

    After replacing the PSU with a Corsair TX650M (650w, 3.3v30A, 5v30A, 12V54A), the barebones config could access the BIOS. Installed everything except boot SSD; still OK.
    Before letting the computer boot back into Win7, I connected two old 19" LCD monitors (Microtek C997SD). For setup and testing, I had been using a  24" widescreen. But Win7 had never seen anything but the Microteks, which I intend to use with this computer. Tried to enter BIOS to verify settings were still correct for SSD. Got splash screen -- regular BIOS background, but no Icons (Green Power, Utilities, Overclocking, etc.). Computer locks: PS/2 keyboard (incl. Ctrl-Alt-Del) and USB mouse, do nothing.
    Connected widescreen, verified BIOS OK. Shut down and reconnected Microteks, attempted boot into Win7, and all was OK. I just can't use a Microtek to access BIOS.
    I hope MSI recognizes how valuable the volunteers here are. Your advice solved the problem at least a couple of days earlier than I would have done on my own. Thank you.

  • I can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.

    i can no longer log into my ichat linked to my gmail.  right after opening up ichat, receive the following message:  lost connection with jabber.  the server has unexpectedly disconnected.  how to troubleshoot?  thanks.

    Hi,
    There can be many reasons why the Login is "up the creek".
    Any break in the network at your end whilst logged in will cause  an issue.
    A sort of discrepancy between what iChat thinks the state should be and what the server thinks.
    If they don't agree the server will refuse to accept.
    A Crash at the server end which does not log you out properly will also do it.
    Any file at any time can be come corrupted.
    Luckily with the iChat .plists they are recreated if removed with an iChat Restart.
    If it were AIM you can also get your Account Suspended  and this will not log you in.
    (It tends to happen from Chat rooms where people notify AIM about bad behaviour (as they see it) and you have to apply to get Un-suspended).
    Most of the big IM services use multiple servers.
    Sometimes these go out of Sync.
    In the case of AIM this happens when they remove Old unused Screen Names from people's Buddy List prior to making them available for re-registration.  I am not sure if this happens at Google.
    You seem to be talking about an account that has worked at Work and having new computer at home.
    As I mentioned the Priority thing you have not said that it has coincided with the new computer logging in  (this will kick the work Computer out of Google whether you are logged in  on the Web Mail page or in iChat)
    IN addition to that iChat stays partially logged in for Off Line IMs
    This is done in the background by a support app called iChatAgent
    If your Computer is ON but ichat is not started people can still send you Messages.
    Instead of saving these on the server until you login iChat will start up.
    Depending if the home Mac is effecting the Work Login it may be holding sway over your Login.
    Using your girlfriend's login may have booted her Off Line where she normally uses the name/login.
    The AIM Side can be specifically set to allow Multiple Logins and therefore NOT allow them.  If this happens you get a warning and messages to do something about it.
    You do not get these in any Jabber or Google Login as the Priority setting is supposed to take care of it.
    If the Login works at the Web Mail Login and on one computer then the .plist on the work computer is the most likely issue.
    There is a small chance that a Corrupt Buddy Pic (Home Folder/Library/Caches/com.apple.iChat/Pictures) may be the cause.
    Set this folder to icon view and also use the Finder's View Menu > Show View Options and select icon view.
    This should show all pics as their icon.
    Check that all display properly.
    At this point I would try a COMBO version update install of the last Update you did over what you have.
    This often corrects hard to trace things
    The 10.5.8 COMBO is here
    11:28 PM      Monday; June 20, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.7)
     Mac OS X (10.6.7),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

Maybe you are looking for