Can no longer get to internet through Time Capsule

I recently had to give my iMac a static IP address, and no the wifi on my time capsule does not work.
The time capsule is and has been plugged into my LAN, my iMac plugs into the time capsule and can connect to the internet fine.
The time capsule has an IP address, has the correct DNS servers, router and domain.
from my iphone i can connect to the time capsules wifi, but cannot get out to the internet.

You have an iPhone question here, since you know that the Time Capsule is working correctly.  Try the iOS Troubleshooting Guide.
http://support.apple.com/kb/TS1398
If still no luck, I suggest that you post in the iPhone support community so that the iPhone experts over there can help. We are not iPhone experts over here.
Using iPhone

Similar Messages

  • Can't Get Internet Through Time Capsule

    I bought TC 500gb tonight, and went through the paper instructions:
    Plugged everything I'll be running on it into the ports (my tivo network adapter, my g4, a usb hub w/ an external drive & a usb printer).
    installed the disc into my macbook pro
    proceeded to launch the airport utility
    It followed the instructions the best I could, and it said at one point proceeding will cause a flashing amber light, do you wish to ignore it (and I chose to, for lack of any idea of what else to do).
    Long story short: Neither computer is getting any internet in or out. Network seems to be fine, though-- I see time capsule and printing works and I can use my external usb drive, but NO INTERNET!!!
    And there doesn't seem to be any way to go back and start over--- any suggestions?
    I have Roadrunner internet, but the modem doesn't have a name on it. It is connected to the correct stuff on the back of the time capsule.
    If not for the fact my neighbor has an open wireless, I doubt I'd be able to write this.
    Please help. I'm very frustrated.
    ~Patrick

    Hi,
    Here's how we fixed it:
    Push in the little button in the back of the time capsule with a paper clip or something for five seconds until it flashes amber rapidly.
    Then open the airport utility, and also open your web browser--if you have internet working, and it is flashing amber, then click manual set up-- create a password for your wireless-- no need to mess with any of the settings to make them out of the ordinary or anything-- when you click update, it will say you have an incorrect setting regarding smpw, and there's an opportunity to unclick it-- do this, and then the time capsule will reboot, and the amber light will turn green, and your internet should work, if it is indeed the same problem I had-- they had never seen it before!
    Good luck!

  • CAn't connect to Internet Through Time Capsule-Self Assigned IP Adress

    My iBook battery died. After connecting to power source, I can't connect to the internet. I get a message that the iBook is self assigning the IP address. How do I correct this? I've removed the battery & done several restarts with no success.

    Here's 10.4 directions, not to different from 10.5, see if it helps...
    Go to System Preferences
    Click Network
    Highlight AirPort and click Configure...
    Choose “By default, join: Preferred networks”
    Select your access point and Remove your access point with the minus button.
    Launch your keychain access in Utilities and delete your access point keychain entry.
    Reboot
    Go back to the “By default, join:” page and click the plus this time to add your access point. Enter the correct password, save, reboot.

  • Can i parental control all computers through time capsule

    can i set parental control on time capsule to filter all the internet in my house?

    First, you need to define how you want to restrict this boarder's access.
    Do you want to enter a list of websites to prevent him from reaching?
    Do you want to stop internet access at certain times of day?
    Do you want to limit the amount of data they use?
    Something else?
    You might not need to buy anything more. How do you get your Internet? Is your cable or DSL modem also a router? Because if it is, you may be able to accomplish your restriction through your modem, instead of your Time Capsule.
    My DSL router is very well equipped, so I use it for my router and I put my Time Capsule in bridge mode. When I look at the admininstrative page for my router, I see numerous options for access controls, many more than in Time Capsule. There are blocking lists based on MAC (Media Access Control) address, IP address, time of day, domain name, etc. And if you're lucky, your modem may allow you to apply specific restrictions to individual computers (by MAC or IP address).
    So check your cable/DSL modem, study its configuration pages and its manual, to see if it is also a router with extensive blocking capabilities. Unfortunately, as a novice, you might not have a good handle on what to set, where, and how. That's why the first sentence of this post is important: First define exactly what type of restriction you have in mind, then see if you can locate an option in your wireless modem/router that will handle that for you. Then you might have to study the manual and do a little reading on the Web to understand how to do what you're trying to do. You can also ask on the forum for your cable/DSL modem, at dslreports.com.

  • Can a tethered iPhone provide internet to Time Capsule?

    We get 3G at our ranch. In an effort to strengthen the signal throughout the house I am considering whether I can use a tethered iPhone to supply internet service via a Time Capsule or Extreme. Any ideas?

    You won't be able to use the iPhone to provide tc with internet. One solution is to get a 3G USB dongle to provide Internet. That would work. But you would need an additional hardware to share the internet from the USB. I think you can buy routers that can share Internet from USB dongles and then connect the tc to the router to get Internet to the tc.

  • Can I access multiple USB printers through Time Capsule?

    I just bought a Time Capsule, and I'm loving having my USB laser printer available on my Airport Network. In fact, I'm loving it so much that I'd like to have my USB photo printer available as well.
    Is it possible to have multiple printers available through the Time Capsule connected to a USB hub?

    Bingo! It worked, many thanks!
    I wish I could remember which associate at my Apple Store said it wasn't possible; that he'd tried every way he could think of short of hacking the Time Capsule.
    You've really helped increase the utility of my network, and I appreciate it.
    Happy Holidays!

  • Have a 2 year old ipad2 and while speakers work fine I can no longer get sound through headphones, how can I get sound through the headphones?

    I have a two year old ipad2 and while the speakers work ok I can no longer get any sound through the headphones? If any one has any suggestions on how I can get sound to come out of the headphones I would be grateful.

    System Preferences --> Sound --> uncheck the mute button next to the Output volume (assuming it is set).  Or move the Output volume slider.

  • I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I can no longer charge my iPhone5 through either of my macbook pros. I get the error message that a USB device is using too much power. Can anyone help?

    I reconnected the original powered hub that I thought probably caused the problem and this time it shut down the whole computer. When I rebooted everything now works perfectly. The system reset. I tried another powered hub and it didn't have the same effect so the old one is heading for the bin and with fingers crossed all systems are now working perfectly. Trying to reset PRAM or reset the SMC didn't work but causing the same power issue did. Thanks for your input though. It did get me to think what was the original cause.
    Cheers
    Guy

  • I can no longer access Bejeweled Blitz through my facebook account.  I get the message that says, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit".  Help please.

    I can no longer access Bejeweled Blitz through facebook.  I get the message, "your browser sent a request that this server could not understand. Size of a request header field exceeds server limit". I can access Bejeweled through FB using my husband's log in so to me that suggests the problem is with my log in. Help please.

    Contact FB or use another browser. 

  • Can't get onto internet through my airport extreme!!!

    My airport extreme is connected to my network wirelessly. When I open the airport utility it sees the base station and I have it set up for the network. There is a green light on the base station, all seems well.
    Except when I connect my laptop to the base station through an ethernet I can't get onto the internet.
    When I do the network check there is a green light on the ethernet but for the network there is an amber light.
    When I go into the system profiler and check the advance settings for the ethernet using the DHCP this is what I get.
    IP: 169.254.192.90
    Subnet Mask: 255.255.0.0
    Router: nothing
    When I connect to my wireless network on my lap top I get.
    IP: 192.168.2.8
    Subnet Mask: 255.255.255.0
    Router: 192.168.2.1
    I will admit I am no genius when it comes to computers or the internet. How do I get the **** internet through my airport extreme?
    Oh, and how do I find out the DHCP Client ID?

    IP: 169.254.192.90
    IP addresses in the 169.254.x.x range are know as "Self-Assigned" IP addresses. They typically arise when your computer, configured as a DHCP client, is unable to find or negotiate with a DHCP server.
    The fact that you computer can find the 802.11n AirPort Extreme Base Station's (AEBSn) DHCP server wirelessly but not by Ethernet may be one of the following reasons:
    o The Ethernet cable or cable connectors are bad.
    o The Ethernet port on either the computer or the AEBSn is faulty.
    o The Ethernet port on the computer is not configured properly.
    Assuming the fault is the last item above, let's double-check your Mac's Ethernet settings.
    System Preferences > Network > Show > Network Port Configurations
    o Verify that a Built-in Ethernet option exists. If it does not, click "+" to create one. (Note: If you are unable to create a Built-in Ethernet configuration, the Ethernet card in your computer either doesn't exist or it is not recognized.)
    o Verify that Built-in Ethernet is at the top of the list. If it isn't, you can drag it to the top.
    Advanced > TCP/IP tab
    o Configure IPv4: Using DHCP
    o Configure IPv6: Automatically or Off
    Advanced > DNS tab
    o Verify that your ISP's DNS server(s) appear.
    Advanced > Proxies tab
    o Configure Proxies: Manually
    o Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
    o Exclude simple hostnames (unchecked)
    o Bypass proxy settings for these Hosts & Domains: <leave blank>
    o Use Passive FTP Mode (PASV) (checked)
    Ethernet tab
    o Configure: Automatically
    Oh, and how do I find out the DHCP Client ID?
    You would create the DHCP Client ID by entering a value in this field in System Preferences. (ref: System Preferences > Network > Advanced > TCP/IP > DHCP Client ID)

  • Since the latest system update to 10.9.2 I can no longer get a signal on my TV through the HDMi lead from the Macbook Air. Has anyone else had this problem and know how to fix it.

    Since the latest system update to 10.9.2 I can no  longer get a signal from my Macbook Air to my TV. Has this happened to anyone else and how can I fix it.

    1. System Preferences > Flash Player > Advanced > Delete All
        Press “Delete All” button under “Browsing Data and Settings”.
    2. Install Adobe Flash Player.
        System Preferences > Flash Player > Updates
        Press the “Check Now” button.
        http://get.adobe.com/flashplayer/
        Download it and quit Safari from Safari menu in the menu bar.
        Follow the prompts to install Adobe Flash Player.

  • Can no longer connect to internet w/ cell signal - advice?

    Hi, all -
    I can no longer access the internet using a cell signal on my Droid 3. Everything was working fine until about a week ago, but now I get no 3G signal at all and only one or two bars. When I turn on the WiFi, I have no trouble accessing the internet. I can make calls with no problem, but cannot access the internet or my apps.
    I have tried the following, but I am still not getting a usable wireless signal:
    ·        -  Restarted device several times
    ·       -  Turned “airplane” settings on and off
    ·        - Removed battery, replaced it and restarted
    ·        -  Dialed *228, then option 1 to activate service
    ·        - Dialed *228, then option 2 to reprogram service
    Does anybody have any other ideas? I REALLY do not want to use the "nuclear" factory reset option unless absolutely necessary!
    Thanks in advance for any help!

        dmiller28, being without data is very difficult! Your efforts are greatly appreciated and you are on the right track with the troubleshooting steps. Have you tried checking the network settings in the device? To do this you will go to: menu>settings>wireless and networks>network mode and check if it is set to CDMA. Otherwise the next step is to do the factory reset which will be the last resort option. Keep us posted, thanks! 
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • I can no longer get you tube on my i-pod touch?

    I can no longer get you tube on my i-pod touch 16gb?
    When I access you tube I get a message cannot connect.

    - Can you connect to the internet with Safari or another app?
    - Have yu tried resetting your iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.

  • I can no longer get the column view since installing 12.0.1.26.

    I can no longer get the column view since installing 12.0.1.26. The only thing my iTunes for PC will not display the column view of songs any more  The only thing I have access to is the view that displays the album covers. I used the Help function, followed the procedure several times.  When I click on the music icon, the icon flashes, but does not bring up a menu as shown in the "help" file.

    1) reset the iPad. Hold power home button until screen goes black, apple logo appears-release
    2) delete the app, reinstall.
    3) wait for an update to the app

  • Can no longer get 2.5GHz

    I have a Newcastle 3500+ in this system and was able to get a 2.5GHz overclock with BIOS 1.8.
    Today I updated the BIOS to Syar's custom 1.C3 BIOS with all settings open, and can no longer get back to 2.5GHz on the overclock. I can try to set the settings in the Cell Menu, but when I save and reboot the machine it will no longer POST. The d-bracket has red lights on 1 and 4, which the manual indicates is processor initialization.
    I'm using the exact same settings as with BIOS 1.8. VCore set to 1.500v + 5%, memory at 2.80v, AGP frequency at 67, FSB at 250, CPU multiplier at 10, mem divider at 166, HT at 4x.
    Should I just flash back to 1.8?

    vcore & vdimm regulation may change between bioses .
    Also having a PSU that work on the edge can manifest changes in fluctuatuions on especially vdimm (&vcore) with a small
    change in the bios voltage regulation control.
    Only way to make sure to set back the same OC data is to have physically measured on the board level
    the actual vcore and vdimm on your current overclock with the 1.80 bios.
    Then measure it on 1.C3 and try setting voltages in bios to get the exact same real values.
    Other option is to go through the whole OC scaling all over with voltages and all .
    Never heard it's something in the 1.C3 bios that should cut your cpu overclock back.
    But since having nor a venice or sandiego or opteron or X2 , rev.E cpu  (using a newcastle) you really have no need to
    use any newer bios than 1.80 .
    So if that one works best for you , keep it .

Maybe you are looking for