Can no longer play .mpg files

I just noticed this. iTunes will not play any .mpg files on my Intel Mini runing SnowLeopard. I don't know if this is confined to video files or not. I have iTunes 9. whatever, it's the latest. The same files play fine in Leopard on my G5 Tower in the same version of iTunes. When I try to watch them in FrontRow (which we all know about by now) it get the error message "Not a recognized file format." Once again I can watch these on the G5 in FrontRow with no trouble. Anybody have any ideas?
I'm really thinking of getting a bunch of used PPC Macs for my home entertainment network, ok i can't blame the poor Intel based models can I, it's just the Snow Leopard droppings all over my house.
Thanks
J.

I should add that these are mpgs of a television series. They were made with QuickTime Pro 7.6.2 or .3 just before the new iTunes and Snow Leopard came out. I can open them with either QT X or QTPro7 on the Mini and they play fine. I don't know where to point the finger since they play through iTunes fine on the PPC Leopard Mac and not the Intel Snow Leopard Mac. It could be how the new tunes works with the OS but those kind of hooks are harder to find than they were back in the old OS7,8,9 days. I'm not meaning to be an old bloke longing for the old days cause i love the magic of technology.

Similar Messages

  • Can no longer play audio files embedded in a PDF

    I can no longer play embedded audio files in PDFs in version 11 for Windows XP (though I could on an older version). The audio will not play on my Mac either. How do I fix this?

    I should add that these are mpgs of a television series. They were made with QuickTime Pro 7.6.2 or .3 just before the new iTunes and Snow Leopard came out. I can open them with either QT X or QTPro7 on the Mini and they play fine. I don't know where to point the finger since they play through iTunes fine on the PPC Leopard Mac and not the Intel Snow Leopard Mac. It could be how the new tunes works with the OS but those kind of hooks are harder to find than they were back in the old OS7,8,9 days. I'm not meaning to be an old bloke longing for the old days cause i love the magic of technology.

  • After upgrading iTunes I can no longer play my songs.  It says that "The song  ________ could not be used because the original file could not be found.  Would you like to locate it?"   I have NO clue where to look.

    After I recently Upgraded iTunes I can no longer play any movies or songs.  It says that "The song ______ can no longer be playe because the original file cannot be found.  Would you like to locate it?"   I have no clue where to look as I'm not tech savvy.  I did look in previous itunes libraries file and it's empty.  Any and all help is appreciated. 

    The links below illustrate how your iTunes should look if you use default settings in preferences.  If you don't use those settings then you have to know what you're doing.
    Image of folder structure and explanation of different iTunes versions (turingtest2 post) - https://discussions.apple.com/message/13025536 and https://discussions.apple.com/message/17457605
    The above links also illustrate the Media folder and its subfolders.  Look for a file in there in the logical structure by folder artist and album.  If you're lucky, linking one file will get an offer to link others and it iwll all come together again.
    I see you are running OSX 10.5.8  it would help to know which version of iTunes you use now and which one you used before.

  • I can no longer play quicktime mov files from a canon firestore

    I can no longer play quicktime mov files from a canon firestore from an HDV camera that play on other macs and play in vlc. It happened all of a sudden. Files that I could play before no longer play. It seems to be something wrong with the quicktime codec management because the files do not play in premiere and final cut pro. In FCP it says: File Error: 1 File(s) recognized, 0 access denied, 1 unknown. These files work on other computers. I have four drives and it doesnt matter which file i attempt to open on each drive, these files are unreadable on this system. Please help. Possible issues might be a corrupted index, but i dont understand how that can go across four different drives.
    Model Name:          Mac Pro
      Model Identifier:          MacPro4,1
      Processor Name:          Quad-Core Intel Xeon
      Processor Speed:          2.66 GHz
      Number Of Processors:          1
      Total Number Of Cores:          4
      L2 Cache (per core):          256 KB
      L3 Cache:          8 MB
      Memory:          8 GB
      4 SATA drives

    Apple kindly updated Quicktime and rendered Firestore files unplayable. I think a recent update of iTunes was the culprit.
    Solutions: What I did. Wipe the system disc. Re-install Snow Leopard. Re-install FCP7. Don't update Quicktime or iTunes to anything after Jun 2011. QT v7.6.6 is the last good version. That'll get your files back.
    A colleague tried a different approach. For this you need a pre-July 2011 version of the file QuickTimeComponents.component.  It is in the system/library/QuickTime folder. Delete your current one and drop in an old one.
    However if you're working with Final Cut X, I think you screwed until Focus and Apple work something out. My address is on my contacts page at teevideousadotcom if you need any further help.

  • I get an error message: "The file you are trying to play has failed to finish downloading and can no longer play." What

    I get an error message for all the Apple tutorial videos:  The file you are trying to play has failed to finish downloading and can no longer play."  What is wrong and how can I fix it?

    This means that you have downloadd the file from the internet, and the file did not download completely so the computer can't play it. To fix this, just re-download the file and make sure it finishes.

  • Can no longer play windows media files

    I recently upgraded to version 10.6.8 of Mac OS X and I can no longer play embedded Windows Media files using Flip4Mac (version 2.3.8.1) on Safari or FireFox. Any suggestions on a workaround?

    You might need to reinstall it, have you tried that?
    http://windows.microsoft.com/en-US/windows/products/windows-media-player/wmcompo nents

  • S. can't play mpg files

    Hi,
    Safari can't play mpg files any more. (I have to download them and play them with QT Player.) Instead, there is a vertical black stripe with little white dots in it.
    Any idea would be much appreciated!
    Thanks a lot
    Peter

    Don't trash the original Quicktime (10) app, you'll be sorry if you do. Quicktime 7 Pro does not add playback capability to videos. Right click on a video and pick Quicktime Pro 7 from the open with menu.
    If you wish to use Quicktime Pro 7 to playback all videos when clicking on a video, get info in the finder for the video... scroll to open with... pick the open with drop down menu... pick Quicktime 7.... and hit the change all button.
    If your still having problems playing  back your videos please post back. We need to find out what kind of mpg video files you have...

  • Can no longer play iTunes-purchased TV shows in QuickTime Pro 7

    Had to reformat hard drive due to nasty virus/spyware I couldn't locate and delete (AVG, AOL spyware protector, SpyBot Resident, Kerio Firewall, Windows Firewall all failed to stop it from entering and those plus AdAware all could not get rid of it). Upon redownloading and installing software (iTunes with QuickTime) I can no longer play the TV shows I purchased at iTunes. Is it because I had to copy them to another drive/disk . . . and then copy them back to my hard drive? I've scanned the files with AVG, SpyBot, and AdAware and came up clean. I've changed the file association from iTunes to QuickTime and from m4v to mpg or something . . . and back again.
    With every change and attempt I get a pink hazy video, but when I fiddle with QuickTime preferences and save the defaults that it keeps automatically resetting itself to, I can see clear video . . . until I reopen the file.
    Help! I am tearing my hair out. I am not tech savvy and cannot find a solution on the discussion boards or elsewhere.
    Thanx bunches.
      Windows XP  

    Nevermind, I changed the metadata of the video file to "music video" instead of "TV show" and I am now able to add it to a playlist X amount of times under the video app.

  • Can no longer play music that I previously purchased

    After performing the iTunes and Quicktime upgrades last night, I discovered today that I can no longer play songs that I previously downloaded from the music store. I also cannot preview any songs in the music store, and I'm assuming that if I actually tried to purchase a song that it also wouldn't work. When I try to play a song from my iTunes library that I previously purchased, a window comes up saying that "this computer is not authorized to play this song" and requires me to enter my password. After I do that, it generally comes up with a message saying that machine authorization is successful, and that I have 2 machines authorized, although it requires me to do this every time I try a different song. After the supposed successful authorization, it starts "accessing the music store" (which makes no sense to me since these songs have been in my own library for over a year) and ultimately comes back with different error messages, including "We couldn't complete your music store request...The music store is temporarily unavailable" or just simply "there was an error in the music store" or "an unknown error occurred." The error numbers vary - 5555, 403, etc. Why is it even trying to access the music store when these are songs that are sitting in my own library?! Now iTunes is simply closing unexpectedly. I know I'm not the only one (to say the least) having problems, and I hope someone figures it out soon since we all have hundreds of dollars worth of music on our computers that we can't listen to. Unfortunately, I plugged my iPod in today to update it, and I'm scared to even find out what's been erased from it.

    Alli hello,
    Quit iTunes...
    Download Cocktail and start the program... click on the 'interface' Icon and tick 'Show Invisible Items' then click the Restart button...
    In a finder window click on the Icon that is your Boot Volume in the Side Bar ... select users ... select shared folder ... select the folder named 'SC info' and put it in the trash and empty it ... Do Not touch any other file.
    Pathway looks like this HD > users > shared > SC info > SC Info.sidb
    Go back to the Cocktail 'interface' window and untick Show Invisible Items and click restart .. quit Cocktail.
    Start iTunes after deletinng this folder and it will prompt you to enter your authorization information again ... see now if your problem still exists...
    Let's know how you get on Alli ... take care ... TP

  • Can No Longer Play .M2V In QT

    Hello,
    I have been having trouble with a Dual 2.7 Powermac lately (freezing). I did an archive and install from my OSX 10.4 CD. I also ran disk repair from the startup cd, and repaired permissions, then ran Yasu (the correct version for tiger) to clean cache files. The mac has been running solid now for 2 days!
    However, I have just realized today that I can no longer playback .M2V files in QT 7. I am not sure when this problem started but I do know that I used to be able to do this. I have FCS Installed (FCP5, DVDSP4, Motion 2, STP) and am running OSX 10.4.4 and QT 7.0.4.
    My .M2V files (encoded with BitVice 1.6) import and play fine in DVDSP4. Any help would be appreciated as I usually do rough previewing of Encoding settings in QT.
    Thanks,
    Matt

    I had this problem a while ago and somebody worked out a solution. If my memory serves me while you have to find your .m2v files and Command click on more than 1 file, so they do not try to open. Then control click on one a .m2v file and go to the "open with" submenu. Tell it to open with Quicktime 7 and tell it to always do so. See how you go.
    Hello,
    I have been having trouble with a Dual 2.7 Powermac
    lately (freezing). I did an archive and install from
    my OSX 10.4 CD. I also ran disk repair from the
    startup cd, and repaired permissions, then ran Yasu
    (the correct version for tiger) to clean cache files.
    The mac has been running solid now for 2 days!
    However, I have just realized today that I can no
    longer playback .M2V files in QT 7. I am not sure
    when this problem started but I do know that I used
    to be able to do this. I have FCS Installed (FCP5,
    DVDSP4, Motion 2, STP) and am running OSX 10.4.4 and
    QT 7.0.4.
    My .M2V files (encoded with BitVice 1.6) import and
    play fine in DVDSP4. Any help would be appreciated as
    I usually do rough previewing of Encoding settings in
    QT.
    Thanks,
    Matt

  • After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The  requested URL was not found on this server"

    After uprading to iOS 5.1 I can no longer play videos in my camera roll. I just get the following error "The  requested URL was not found on this server".
    Anyone have any ideas?

    You have two choices to try & fix this: 1. Backup your phone, then restore as a new device, then restore from the backup you first created, or 2. Follow the advise from this poster:
    I had the same problem with the black blocks after upgrading to iOS4 on my iPhone. The reason for the black blocks is that the thumbnail images for those particular images have not been created when the Photo Library has been updated to iOS4. I followed the advice on a couple of blogs and fixed the problem.
    1. I downloaded iPhone Explorer free software (http://www.macroplant.com/iphoneexplorer/) so I could view the photo data folders on my phone. I could see that the thumbnail images were missing.
    2. I followed a slight variation on the instructions on this blog. (http://blog.mbentley.net/2010/06/iphone-ios-4-upgrade-restore-lost-pictures-in-c amera-roll/)
    3. First I copied the Photo Data folder by dragging it from the iPhone Explorer window to my Mac desktop.
    4. Through iPhone Explorer I deleted the info.plist file in the Media/PhotoData/MISC folder.
    5. I also deleted the Photos.sqlite and PhotosAux.sqlite files in Media/PhotoData.
    6. I then rebooted the phone and launched the Photo Library.
    7. The Library rebuilt it's self again and recreated the thumbnails.
    8. The problem was fixed!!! Thank you M Bentley!
    I hope this helps - this has been bugging me for 2 weeks.
    Regards
    Alijm23

  • Quicktime Wont Play MPG Files

    Hi,
    Just bought my first Mac - loving it. Only issue I have so far is that I have a load of video camera clips with an .mpg extension, which I copied onto an external drive when I had my PC. Now when I come to play these files, it comes up with "The movie xxxxxx.mpg can't be opened. You may need to install additional software to open this type of file.
    Wherever I look, it says Quicktime will play .mpg files, so I can't understand why they wont work. All the photo's on the same drive have gone into iPhoto no problem. When I go onto "tell me more" it starts going on about downloading additional media support. Not sure if I'm missing something simple!
    Please help!
    Thanks,
    Darran.

    Yea...I did this when I got my Mac for Christmas 2009. I can watch the videos no problem...WITHOUT SOUND! If I use VLC everything works right, but I want to be able to burn the videos to DVD to watch somewhere else too. I bought a Mac because this was supposed to be easier...NOT!
    Thinking of going back to a PC. At least everyone knows they have issues.

  • Play MPG file

    Hi all,
    i've 2 problems: the first one is that i cannot play mpg files with totem, usually the codec i needed to install to play them was gstreamer0.10-ugly (that ofc is installed together with many others codecs ), but i can only hear audio from those files on the properties it shows "MPEG-1 video" codec, what package i need to install?
    Thank you.

    yes, but it didn't help, with some files i get this error too:
    GstCDXAParse: The stream is of a different type from than handled by this element
    Caranthir
    EDIT: i installed mplayer and i can play mpg with it, still not working with totem...
    Last edited by Caranthir (2007-10-21 19:24:26)

  • After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - whihc has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5.

    After ios 8 update I can no longer play music through my car. I have a 2012 Nissan Rogue - which has its own cable made to use with iPhone 4 - I use a apple adapter to converst to use with 5. Has been working fine up until update. Is there a fix for this? The car does not have usb

    Here I come to save the daaaaaaaaaay!!!
    Had the same issue with my Nissan Rogue 2011.
    This listed below will fix it...
    Go to General > Restrictions > CarPlay -- Make sure Carplay is DISABLED. (The new IOS 8 enables this on default)
    Go to General > Reset > Reset Network Settings
    The Nissan Rogue radio system was never designed to work with CarPlay. By default, CarPlay feature comes enabled when you install IOS 8. Suckz, right?
    You're very welcome! Have a great day!
    Sincerely,
    The Superhero

  • I can no longer print PDF files that were scanned with the very same MX479 on Windows XP, SP3

    I can no longer print PDF files that were scanned with the very same MX479 All-in-One.
    I have an (obsolete) Windows XP, SP3 computer.  Obviously, no updates from Microsoft
    have occurred that might have impacted my Canon Pixma MX479.
    When I attempt to send 1 or more pages from a PDF file to the printer, I don't even get the
    Canon PIXMA popup that would allow me to cancel the print job.
    Yet the Print Queue icon appears in the lower right corner of my monitor.
    If I view the Print Queue, the print queue shows "spooling" and does nothing more.
    If I attempt to CANCEL the print job in the Print Queue, it simply changes to "deleting -
    spooling".
    I cannot cancel the print job that shows NOT RESPONDING via Task Manager, either.
    In fact, the only way the Print Queue icon disappears is if I totally reboot my computer!
    "Luckily", I can still print e-mails, Word documents, and even my downloaded PDF of my
    bank statement.
    So, I was thinking that it was *only* PIXMA'S OWN SCANNED PDFS that could not be
    printed ON THE SAME PIXMA 479.
    However, I have since realized that I also cannot print USPS Signature Proof of Delivery
    PDFs that I received from USPS via e-mail.
    So why can I print *some* PDF files, but not *all* PDF files, like I previously could do?
    THESE SCANS ARE OF LEGAL DOCUMENTS, SO I WILL LIKELY HAVE TO E-MAIL
    THE REQUISITE, PREVIOUSLY SCANNED PDFS TO FEDEX TO PAY FOR *THEM*
    TO PRINT THEM.
    NOTE: I *have* tried turning the PIXMA off, unplugging it, rebooting the computer, plugging
    the PIXM in and restarting the PIXMA - still no ability to print PIXMA-scanned PDFs.
    And, I find it very strange that e-mails, Word documents, and some other PDFs print with
    no problem "around" "NOT RESPONDING" PIXMA print jobs.
    I have owned Canon printers for years, including the MX420, and the MX340.

    There may be some security issues related to the USPS PDFs.
    http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
    I can't help with the scan/print problem. You seem to have done everything I would try.
    I don't know if maybe using a registry cleaner would help.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

Maybe you are looking for