Can no longer save edited images in version set with PS 10.
I've been using PS 10 for many months and have been able to save my edited raw images as jpgs in version sets. I can no longer do this. The edited images save on the hard drive but not in the PS organizer...thank you for any help you can offer....
Ok, you need to know what you want to do with your image. For example if it's for the web the best way to save to jpg is.. File-Save for Web, then you will see a Box with four pages,, you can choose: Original which is going to be your original image,... Optimized which is a Lower quality version. 2-Up and 4-Up.
when you click on 4-Up Tab you see your original image in the top left, Also you have your image in 3 different windows with different file size and speed. You can click on each window and inside the Preset in Top right choose JPEG. and you can change the quality from Low to High or Drag the Quality Slider for different quality.
NOTE: when you do File-Save For Web,, you are going to have a flatten Image.. you will loose your Layers.
It is always better if you shoot your images In higher Res, such as 240, or 300 dpi, and later Down-sample the image to a lower quality for the web. If you have the original image at Higher Res, First you should Go to Image Image-size For Example Height 1200 Pixel. If you go ahead and save the file for the web then you don't need to change the Resolution. don't forget to Sharpen your image when you Down-sample
Similar Messages
-
Why I can no longer save edited images as jpeg file in CS6?
When the save dialog box appears, under Save Options and next to Layers there is a yellow triangle with an exclamation mark showing the Layers are not saved. My images are 72 dpi, I have changed screen resolution and no result.I have the image set to RGB colors and 8 bits/channel. Anybody else has experienced this?(It saves it fine in psd, though).Help!!
Ok, you need to know what you want to do with your image. For example if it's for the web the best way to save to jpg is.. File-Save for Web, then you will see a Box with four pages,, you can choose: Original which is going to be your original image,... Optimized which is a Lower quality version. 2-Up and 4-Up.
when you click on 4-Up Tab you see your original image in the top left, Also you have your image in 3 different windows with different file size and speed. You can click on each window and inside the Preset in Top right choose JPEG. and you can change the quality from Low to High or Drag the Quality Slider for different quality.
NOTE: when you do File-Save For Web,, you are going to have a flatten Image.. you will loose your Layers.
It is always better if you shoot your images In higher Res, such as 240, or 300 dpi, and later Down-sample the image to a lower quality for the web. If you have the original image at Higher Res, First you should Go to Image Image-size For Example Height 1200 Pixel. If you go ahead and save the file for the web then you don't need to change the Resolution. don't forget to Sharpen your image when you Down-sample -
Can someone help. I use Photoshop Elements 13. I can no longer save edited photos. get messages - "Nothing was imported" "The file or folders selected to import did not contain supported file type. It started this a couple of weeks ago and I had a friend come fix it just 2 days ago. It took him several hours and I lost all tags I had on over 10,000 pictures. Now it has done it again. I'm so upset. I lost a lot of stuff. I don't want to keep bothering him with this. Please Help.
How did you import the files to your computer?
What model number camera? -
I'm using a Mac / Leopard. Beginning about a month ago, I can no longer "save as" an image. The "Save Image As" menue comes up -- but then nothing. I can drag images onto the desktop, but that's it. I tossed out Firefox, and then downloaded it and reinstalled it, but have the same problem. (I couldn't figure out how to get rid of profiles and bookmarks -- so they remained). As I type this question on the Firefox website, I don't see the forum in front of me -- just a window to type a question. So, if you answer this question, I'm not sure I'll be able to find the answer. Thus, if you'd be so kind as to also email me the answer, that would be greatly appreciated: davidfreeman11 AT gmail.com Thanks
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r124
Update the [[Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/ -
I have a Mac OSX 10.6.8 and I can no longer "save to iphoto" when photos come by email.
I have a Mac OSX 10.6.8 and I can no longer "save to iPhoto " when I get photos on email.
What changed, before you could no longer save image attachments to iPhoto?
Did you install new software or upgrade to newer versions? Which version of iPhoto are you using?
The "Save to iPhoto" feature has been missing for some iPhoto versions. I do not remember exactly when it vanished, but it is back with iPhoto 9,6 and MacOS X 10.10.2.
As a work-around - you can drag photo attacuments from your mail to the iPhoto icon in the Dock to save them to iPhoto. -
After I installed the recent Apple security patch, I can no longer save PDFs when using Safari. And Firefox no longer can open website PDFs. Any suggestions?
Dansyacht wrote:
If the previous Safari suggestion doesn't work try the following:
In Finder, go to Macintosh HD/Library/Internet Plug-ins and move AdobePDFViewerNPAPI.plugin to the Disabled Plug-ins Folder. Restart Safari. If this works you may just want to delete that FUBAR plug-in.
Thanks. This was the solution for me.
Message was edited by: tvdowntown -
After installing Mavericks I can no longer save a new word document or pdf by typing the name of the destination folder in the Finder window. The save button greys out. Solutions anyone?
Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
I can no longer save a Numbers spreadsheet. Why?
I can no longer save a Numbers spreadsheet.. Why?
Rodeo,
I received the file you emailed. Without opening the file:
I can tell you that you were NEVER able to save the file. This is a Microsoft excel file (which we know because the extension is ".xls"). Numbers can open excel files then you can save the file as a Numbers file OR you can export the file back to excel using the menu item "File > Export To > Excel..."
Did you create the file in Excel? If so you can continue to edit the file in excel. If you double clicked the file and it opened in Numbers then you need to answer the question which application do you want to use (Numbers or Excel)? -
Photoshop CS6 - can no longer save file
Hello, can save 6 out of file, program crashes in Photoshop CS.
Error Message in Windows protocol:
Name of misapplication: Photoshop.exe, Version: 13.0.1.34, time stamp: 0x5269b25c
Name of the faulty module: cooltype.dll, Version: 5.10.33.20743, time stamp: 0x4fce9787
Exception code: 0xc0000005
Fault offset: 0x000000000006fa62
ID of the faulty process: 0x1320
Start time of misapplication: 0x01d01305b7c1c696
Path of incorrect application: C: \ PROGRAM FILES \ ADOBE \ ADOBE PHOTOSHOP CS6 (64 BIT) \ Photoshop.exe
Path of the faulty module C: \ PROGRAM FILES \ ADOBE \ ADOBE PHOTOSHOP CS6 (64 BIT) \ cooltype.dllI understand what you are saying,but, how do I get it back to what it
was???
In a message dated 4/14/2015 9:18:23 P.M. Eastern Daylight Time,
[email protected] writes:
CAN NO LONGER SAVE A JPEG FILE IN NORMAL FASHION
created by Chris Cox (https://forums.adobe.com/people/Chris+Cox) in
Photoshop General Discussion - View the full discussion (https://forum
s.adobe.com/message/7439127#7439127) -
In the new iphoto app, why can't i save multiple images to camera roll at once?
why can't i save multiple images to camera roll at once? it seems i can only save one at a time and its very frustrating..
the options seem to be there, they are just greyed out and i cant click on them.
at first i thought its because the images were too big, so i tried it with smaller images but same thing.
APPLE HELP!I can confirm @khaniff's original post the option in iPhoto for iOS is greyed out in conflict with the referenced article that follows:
Save to the Camera Roll
Tap a photo, album, or event and tap .
Tap Camera Roll.
Confirm or change the photos you want to share by tapping an option.
Select all the photos in an album or event: Tap All.
Select a range of photos: Tap Choose, tap Range, tap the first and last photos in the range, and tap Next.
To use your photo in another app, open the app and select the Camera Roll album. -
How can I export an edited image to a file?
I can't seem to find a way in iPhoto 09 do this. Can I export an edited image to a file, keeping the edits intact, or do I have to use a 3rd party editing app when I edit from inside iPhoto 09?
I would prefer to use iPhoto's editing tools so should I import previously cropped images into iPhoto? If yes, what file should I use? I was wondering if anyone does this on a regular basis and if there issues doing this.
I like the editing tools in iPhoto very much. In other apps I have always cropped, resized, corrected levels and a bit of color. I am not a power user by any means and I am close to doing this all in iPhoto if I could only export the edited image to a file.
The reason I want to do this is because the printing portion of my work flow is to upload files to my merchant who prints them and are ready for nearby pickup within an hour. This is all done at a very reasonable price and the color accuracy is very close.
Any advice would be greatly appreciated.
Regards,
JimYou can edit from iPhoto by dragging to the desktop or exporting using the File -> Export command, setting the Kind to anything except original.
But you probably don’t need to:
There are many, many ways to access your files in iPhoto:
*For Users of 10.5 Only*
You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Apple-Click for selecting multiple pics.
Uploaded with plasq's Skitch!
You can access the Library from the New Message Window in Mail:
Uploaded with plasq's Skitch!
*For users of 10.4 and 10.5* ...
Many internet sites such as Flickr and SmugMug have plug-ins for accessing the iPhoto Library. If the site you want to use doesn’t then some, one or any of these will also work:
To upload to a site that does not have an iPhoto Export Plug-in the recommended way is to Select the Pic in the iPhoto Window and go File -> Export and export the pic to the desktop, then upload from there. After the upload you can trash the pic on the desktop. It's only a copy and your original is safe in iPhoto.
This is also true for emailing with Web-based services. However, if you're using Gmail you can use iPhoto2GMail
If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
*If you want to access the files with iPhoto not running*:
Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
1. *Drag and Drop*: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
2. *File -> Export*: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
3. *Show File*: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected.
Regards
TD -
I have purchases under an expired AOL account and very old Mac that I can no longer listen to on current versions of iTunes. Previous version of iTunes accepted the music. Now, I have a group of songs that will not sync to my iPod because it is associated with the old AOL account. What do I do?
If you have an iBook G4, (PPC) you can't do much.
But if that is a MacBook (intel) you may be able to
upgrade the OS X, if the hardware is up to it...
Since there were about nine different build models
of MacBook (not powerpc iBook) to identify what
one you have would be the first step to knowing
what OS X and RAM upgrades it could use.
If the computer is not already at OS X 10.6.8,
it can't go online to get or use OS X 10.7.5. So,
when you more accurately describe the 'Book,
detailed information is available.
When you find the serial number, there is a web
page that can be used to identify by serial no.
http://www.powerbookmedic.com/identify-mac-serial.php
That'd be a first step. Or even the Model number
which should be visible on the outer case by hinge.
Good luck & happy computing! -
How do I transfer a project from someone else's FCPX, version 10.0.9, which I can no longer open, to my FCPX, version 10.1.4?
You need all the project and event folders associated with the production. They need to be in explicit locations or they will not be seen my the application.
Start reading here
http://www.fcpxbook.com/updates/101/
You use the Upgrade Project and Events function in the File menu when you have the correct folders in the correct location to update the volume you want. -
I use firefox 9, why can not I save as image on google image?
I use firefox 9, why can not I save as image on google image?
Try the Firefox SafeMode to see how it works there. <br />
''A troubleshooting mode, which disables most Add-ons.'' <br />
''(If you're not using it, switch to the Default Theme.)''
* You can open the Firefox 4/5/6/7 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
''Don't select anything right now, just use "Continue in SafeMode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
'''''If it is good in the Firefox SafeMode''''', your problem is probably caused by an extension, and you need to figure out which one. <br />
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
''When you figure out what is causing that, please let us know. It might help other user's who have that problem.'' -
I bought an Adobe writer program a few years ago,and have have had no problem saving information I've added to pdf forms. For some reason, I can no longer save the information that I've entered. In fact, I get a message that the information will NOT be saved. How can I correct this? Thanks!
Hey louiseg45826294,
Thank you for posting on Adobe forums.
Could you please let me know what Adobe Writer program you are talking about. Is it Adobe Acrobat or Reader?
Could you please share the screenshot of the exact error message that appears.
Are the PDF forms saved on your computer's local drive?
Hope to hear from you.
Regards,
Anubha
Maybe you are looking for
-
I have to delete a request in a cube. Unfortunately it isn't possible. I get a error message "Data target has already got request 25.445; deletion not permitted". Do you have an idea what is wrong? Thanks!
-
Things we all want in the MacMini!!!
Howdy everyone, I am very excited about the new MacIntel Mini! Some great enhancements Apple made was the addition of two extra USB 2.0 ports! Yea! They also added Front Row and the Apple IR Remote too! However, when they did this, lets go all the wa
-
Urgent : Is there any c++ parsers available for reading tnsnames.ora
I have to parse the tnsnames.ora and get the connection string , host name , instance name , port etc .. and store it in my local memory structure . Is there any c++ parsers available , which parses and gives the desired output or do i have write my
-
Hi, When I put raise form_trigger_failure in post-update Or Post Update the form builder go throw normal behviour and insert or update the record. Regards,
-
How to change z-value in specific region in intensity graph
Hi! I have an intensity graph and I want to mark a specific region which is dark and then change the z-value(autoscale) so I can see what in this region, of course the rest of the intensity graph will be very bright but it's not a problem. How do I