Can no longer scan with the HP Envy 4500

I can no longer scan documents with the HP Envy 4500. When I try to scan it times out and I receive the following error message:
"Scanner communiocation cannot be established. Ensure your product is powered on, check the connection, and ensure your network is functioning properly. If these conditions are correct, restart the product and try scanning again." I use a wireles connection to the HP Envy 4500 and it is working fine as I can print documents with no issues. I ran the HP Print and Scan Doctor and it flagged the issue as a potential problem with the device driver. I uninstalled the HP software and downloaded the latest version from the HP site, installed it, and tha did not correct the problem. At this point, I am not sure what else to try and correct the problem. Any suggestion would be much appreciated.

Thanks for getting back to me
If the printer will not make copies, the unit may have a "Scanner Failure", unfortunately, and resetting the router, or computer troubleshooting would not make a difference.
You can try a power reset on the printer, to see if that will help:
Power reset the printer:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
You can also try using a different wall outlet to see if this makes a difference.
If the problem continues, contact HP's Technical Support directly to discuss your printer replacement options, as you would require a new printer if there is a Scanner Failure.
Reach our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Can No Longer Scan With Canon MG5220 But Printing Works Fine

Hello,
I have not had luck with Canon so hoping my Apple community can come through for me Here is my problem. I have a Canon MG5220 "all-in-one" that I am able to print to just fine. I was able to scan a year ago but something has changed and I am no longer able to scan. I have all the Canon software and the error I get is as follows when using MP Navigator 4.0 EX:
"Error 2.10 - Cannot communicate with scanner. Cable may be disconnected or scanner is turned off. Check status."
I have deleted and re-added my printer several times but that has not done anything. I believe there was a time in the past when it was scanning properly that I had a separate printer icon under "Printers" on left of "Print and Scan" sscreen for the scanner but not sure (can someone confirm?). Regardless, I only have one now.
My printer is connected as follows: MG5220 is wireless to my FiOS Actiontec router and then hardwired Ethernet to iMac. I have turned Wi-Fi status on and off o Mac and that has not made a difference.
Any help would be much appreciated.
Thanks,
epie

Open Finder and navigate to Applications > Canon Utilities > IJ Network Scanner Selector EX and open the Canon IJ Network Scanner Selector EX utility. This utility will search your local network for the MG5220 and if found, should show something like below.
If the MG5220 is found, ensure that it is selected - as opposed to "Do Not Use" - and then press the OK button.
Now open MP Navigator and select the Preferences (as shown below)
From the Preferences window, with the General tab selected, ensure you have the MP5200 Series Network set as shown below (which is for my wireless MG6250).
If it is set, press the OK button to close the Preferences window and then see if you can scan.

I can no longer scroll with the button on my touch pad. Have tried everything on Firefox help and still can't scroll....HELP please.

I have just updated to the Firefox 4 Beta and from having no problems at all with the previous version I can now no longer scroll. I have reloaded my touch pad drivers and also been onto "about:config" and altered various things suggested by 'firefox help' and still no luck. The scroll button on the touch pad does still work as I can still scroll in Thunderbird and any of the other programs that I use, just not with Firefox any longer. Any suggestions would be gratefully received. Many thanks.

Since today the scrolling started to work for me. Was there a fix auto installed? I havent updated anything that I know about.
I might have uninstall an old Java JRE, don't remember when I did it, could that have done it?

TS3938 Can no longer scan with my MP800 Canon printer

I've seen lots of posts on this, and it is extremely frustrating that I'm starting to think it's just assumed that the owners of MP800 Canon printer/scanners will just toss out a perfectly good, little-used piece of hardware and buy something new. I've tried going to the HP site, loading the new drivers, etc. I've also tried changing from MP Navigator to Image Capture, but nothing happens when I open the Scanner, except for an empty screen that turns completely white when I click on Show Details.
I am REALLY disappointed in Apple OS update. In the PC world (which I bought a mac to get away from) I would just uninstall the entire printer, then re-install it and count on the correct drivers etc. to be loaded. I've tried to find a way to do this on the forums, but no luck. Is there any way to un-install the printer/scanner completely? And then re-install it to pick up the new drivers/software or whatever, that would work?

Uninstalling and reinstalling the drivers should resolve this issue. Please perform the following to remove the currently installed drivers: (If any items are not listed, move on to the next step.)
1. Open Finder
2. Open the 'Library' folder.
3. Open the 'Printers' folder.
4. Open the 'Canon' folder.
5. Send the 'BJ Printer' folder to the trash.
6. Return to the 'Library' folder.
7. Open the 'Receipts' folder.
8. Locate any items related to your printer and send them to the trash.
Leave the 'Canon Printer Drivers.pkg' file in the folder if it happens to be listed.
9. Return to the 'Library' folder.
10. Open 'Image Capture'.
11. Open the 'Twain Data Sources' folder.
12. Send any Canon files related to your printer to the trash.
13. Open the Applications folder.
14. Open the Canon Utilities folder.
15. Send the MP Navigator to the trash.
16. Restart your computer.
To get your MP800 Canon printer operating , please follow these steps:
Download the following drivers:
mcpd-mac-mp800-10_51_2-ea11.dmg
msd_-mac-mp800-12_13_3-ej7.dmg
mpnosx207ej7.dmg
Once the downloads are completed, open each installer package to begin setup.
Once this process is completed, try scanning and printing with your MP800 Canon printer.

HT4972 What if I can no longer sync with the original computer i sync'd with before because it died. How can I update without losing my media?

My old computer died and will not turn on. Now that i have a new computer I do not know how to sync/update my Ipad/ipod without losing my media

Sync Your iOS Device with a New Computer Without Losing Data
http://www.howtogeek.com/104298/sync-your-ios-device-with-a-new-computer-without -losing-data/
Syncing to a "New" Computer or replacing a "crashed" Hard Drive
https://discussions.apple.com/docs/DOC-3141
 Cheers, Tom

I can no longer print PDF files that were scanned with the very same MX479 on Windows XP, SP3

I can no longer print PDF files that were scanned with the very same MX479 All-in-One.
I have an (obsolete) Windows XP, SP3 computer. Obviously, no updates from Microsoft
have occurred that might have impacted my Canon Pixma MX479.
When I attempt to send 1 or more pages from a PDF file to the printer, I don't even get the
Canon PIXMA popup that would allow me to cancel the print job.
Yet the Print Queue icon appears in the lower right corner of my monitor.
If I view the Print Queue, the print queue shows "spooling" and does nothing more.
If I attempt to CANCEL the print job in the Print Queue, it simply changes to "deleting -
spooling".
I cannot cancel the print job that shows NOT RESPONDING via Task Manager, either.
In fact, the only way the Print Queue icon disappears is if I totally reboot my computer!
"Luckily", I can still print e-mails, Word documents, and even my downloaded PDF of my
bank statement.
So, I was thinking that it was *only* PIXMA'S OWN SCANNED PDFS that could not be
printed ON THE SAME PIXMA 479.
However, I have since realized that I also cannot print USPS Signature Proof of Delivery
PDFs that I received from USPS via e-mail.
So why can I print *some* PDF files, but not *all* PDF files, like I previously could do?
THESE SCANS ARE OF LEGAL DOCUMENTS, SO I WILL LIKELY HAVE TO E-MAIL
THE REQUISITE, PREVIOUSLY SCANNED PDFS TO FEDEX TO PAY FOR *THEM*
TO PRINT THEM.
NOTE: I *have* tried turning the PIXMA off, unplugging it, rebooting the computer, plugging
the PIXM in and restarting the PIXMA - still no ability to print PIXMA-scanned PDFs.
And, I find it very strange that e-mails, Word documents, and some other PDFs print with
no problem "around" "NOT RESPONDING" PIXMA print jobs.
I have owned Canon printers for years, including the MX420, and the MX340.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

After updating to the current versions of Adobe, I can no longer scan and send emails.

After updating to the current versions of adobe, I can no longer scan and send emails nor can I open an attachment upon receiving an email.

Capt Camo wrote:
After updating to the current versions of adobe...
What exactly is "adobe"? Adobe is the name of a company that has hundreds of software products, each with a distinct name.
You are posting in the Flash Player forum; do you really receive emails with Flash attachments?
Flash Player also cannot scan or send emails.
Finally you give no information regarding your operating system, email client, etc.

HT201210 Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?

Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?
Thanks for your help
Pippa

Click here and follow the instructions.
(98708)

I can no longer connect to the available wi fi networks with my ipad 1

For some reason I can no longer connect to the available wi-fi networks with my ipad...help

If no change after powering your iPad off and on and/or after a reset which is done by pressing and holding the home button and the sleep/wake or on/off button simultaneously until you see the Apple logo and then release, try resetting network settings on your iPad at Settings > General > Reset > Reset Network Settings. This will erase all saved wi-fi network settings from your iPad. This will require rejoining every wi-fi network your iPad has access to when returning within range of such a network.
If no change after this, try restoring your iPad with iTunes as a new iPad or not from your iPad's backup.
If no change after restoring as a new iPad, your iPad has a hardware problem.

With verson 12.01.26 my iTunes can no longer connect to the iTunes store or iTunes Match

After downloading iTunes version 12.01.26 on my PC my iTunes can no longer connect to the iTunes store or iTunes Match. My itunes displayed a message at the top that it was connecting to the iTunes Store. After closing my laptop and opening it again after a few hours, there was a message stating that my computer was unable to connect to iTunes because of a problem with my internet connection. My laptop is connecting fine with the internet, yet not through the iTunes program, or at least it seems that way. I'm not positive but feel like the issue may have stemmed when I downloaded the new version, I think maybe I messed up the process somehow by closing my computer or something.

Hello there, gracieflad.
The following Knowledge Base article offers some practical and detailed steps to help resolve issues with not being able to connect to the iTunes Store with iTunes on your Windows computer:
Can't connect to the iTunes Store - Apple Support
Thanks for reachign out to Apple Support Communities.
Cheers,
Pedro.

Can no longer connect to the internet with the 580...

Hi, my PC was able to connect to the internet with my 5800 via a USB cable. Now, I can no longer connect to the internet with the 5800 via a USB cable.
I had never tried connecting the computer to the internet with the 5800 via Bluetooth prior to this incident, so I tried that. Strangely, it works.
My question is how come I can no longer use the 5800 via USB as a modem, but how come the 5800 via Bluetooth still works as a working modem?
Sorry, if my sentences are confusing. I have a terrible headache at the moment. While the Bluetooth connection works, I just feel better using the USB connection and knowing that my 5800 has a clean bill of health.
BTW, my PC is on Windows 7 Professional at the moment. I've tried uninstalling the Ovi Suite and reinstalling it, but that didn't work. I've also tried using PC suite instead of the Ovi Suite but that didn't work either. What other options do I have, beside hard resetting the phone? Thanks in advance.
Edit: BTW, the message shown when I tried to connect to the internet with the 5800 USB modem was "failed to establish a network connection".
Solved!
Go to Solution.

Hi,
I am so much tierd by trying to connect my phone to pc.
I have nokia 5800,and I used to connect my phone to PC by USB cable.
But from last 5 days I could not able to connect it.
The problem is that,
when I connect phone to pc,notification comes up that phone connected via ovi suit,but within a minute or 2,
"porable device" icon disappears from the task bar in the right hand corner,so connection could not proceed further.
Please help me in this asap.
I had tried following already:
1.format my PC
2.Installed new ovi suit
now please give me a proper solution on that.
thank you.

HT5622 When Playing candy crush or dice with friends, I can no longer connect to the apps store

When Playing candy crush or dice with friends, I can no longer connect to the apps store to purchase items like lives, dice etc. This seems to be since the upgrad to IOS7. Thoughts?

Hello there, gracieflad.
The following Knowledge Base article offers some practical and detailed steps to help resolve issues with not being able to connect to the iTunes Store with iTunes on your Windows computer:
Can't connect to the iTunes Store - Apple Support
Thanks for reachign out to Apple Support Communities.
Cheers,
Pedro.

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

I used to be able to see a preview of my scan which i can no longer see only the adobe acrobat symbol I am using Adobe pro 9 can this be changed??

Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way.

I have an iphone 4 and it's not working, if i pay can apple replace it with the same model even though it's no longer for sale?

I have an iphone 4 and it's not working, if i pay can apple replace it with the same model even though it's no longer for sale?

If the iPhone has not been opened or serviced by other than Apple
or authoriized service provider (there are a few other requirements),
you should be eligible for out of warranty replacemement for $149 US.
Apple maintains sufficient stock for replacements even for iPhones that
are no longer available for purchase. You may be better off upgrading to
a newer version than paying $149 to stay with the iPhone 4.
What is no longer working? If you provide more details as to the problem
and what troubleshooting steps you have taken, some one may offer
a solution.

When Firefox last automatically updated, it suggested that Adobe reader needed updating, now, with Adobe Reader 8, I can no longer print from the internet, only to file. Help please.

When Mozilla Firefox last automatically updated, it suggested that Adobe Reader needed updating. After updating to Adobe Reader 8, I can no longer print from the internet, only to a file. I know the printer and its interface must be OK because Word prints normally.

Problem solved, it was my oversight, I had not removed the check from the Print to File box in the print set up.

Can no longer scan with the HP Envy 4500

Similar Messages

Maybe you are looking for