Can no longer see email message content after upgrading to ios 6

Since upgrading to iOS 6, my email loads (from three different email accounts), but when I click on an individual message the content of the message doesn't show, only the Subject line. If I click "reply" the content of the message appears. Anyone else having this issue?

Same issue here. Tried "Reset Network Settings", reboot, Airplane mode on/off, and turned off 3G.
also noticed when I dial someone from iPhone4 it defaults to speaker phone. I did check voice control and Shazam to make sure it wasnt the microphone malfunctioning and both those apps work fine.

Similar Messages

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

On my 2012 MBP I can no longer use dual screens/HDMI after upgrading to 10.8.2. I'm using Moshi Thunderbolt adapter

I think you are sailing in uncharted waters with those kind of modifications.
I am only guessing, but if you have not already done so, do a PRAM reset and then trash your FCP preferences.
Big Poppa Chris wrote:
I've also notice when I start the computer up, it stays on the grey screen longer than it did when I had the original card (512 mb).
My understanding is the Mac is doing a ram/hardware test during the grey screen, if the card you added had additional memory, then it is very likely the test will take longer - but I am no hardware expert.
MtD

After upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to co

after upgrading to ios 8.1.1 my ipad 4 camera doesnt work i just got blank screen, but i still can use it for facetime, i supposed after upgrading to ios 8.1.2 it will fix but it doesnt work. i cannot restore to ios 7. hopefully, any suggestion to correct it? thank you

Hello pichastos,
Thanks for using Apple Support Communities.
To troubleshoot this issue where your camera is displaying a black screen, please follow the information outlined below.
You see a closed lens or black screen
If you see a closed lens or black screen when you open the Camera app, try these steps:
Make sure that there’s nothing blocking the camera lens. If you’re using a case, try removing it.
Force the app to close, then open the Camera app again.
Restart your device, then open the Camera app again.
If your device has a front and rear camera, try both cameras by tapping (camera swap icon). If you see the closed lens or black screen on only one camera, take your device to an Apple Retail Store or Authorized Service Provider for more help.
Get help with the camera on your iPhone, iPad, or iPod touch - Apple Support
Take care,
Alex H.

Can no longer see text messages on iMessage

Hi,
As of this week, I can no longer see my text messages on my laptop (OS 10.10.2). My iPhone (8.1.3) gets texts, and in the settings for Messages, the only forwarding device is my iPad. I can't add a device here for some reason. Any ideas?

Hi,
The Fact the iPad can do it suggests the Apple ID is active on the iPhone.
It hints that the Messages app and the iMessages account on the Mac are not logged in (despite what the app might tell you).
Can you set the iPhone to Send from it's own Number.
Can you then send an iMessages to the Apple ID ?
Does it arrive on the Mac ?
If you deselect the iPhone Number on the Mac can you send from the Apple ID to the iPhone Number ?
I would try using the Sign Out button on the Mac and then Quirt the app before adding back the password and re-enabling the Account on starting it up again.
8:37 pm Monday; March 16, 2015
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Can no longer sync Ipod to Itunes after upgrading to Itunes 7

I can no longer sync Ipod to Itunes since upgrading to Itunes 7. When I try it freezes my Itunes and I have to force quit the application. Anyone else know how to solve this? Anyone else having this problem?
Powerbook G4 Mac OS X (10.4.9)

I have the 3rd generation IPod and I thought it happened when I dropped it, but after thinking about it it did happen the same time I switched to itunes v7.
I have to stop the auto-sync and have the ipod completely restored each time. So when I want to update my ipod I have make it an hour adventure.

I can no longer find the tones menu after upgrade to IOS6

Ever since my upgrade to iOS6.1 I can no longer see my ringtones in iTunes. I still have it and can see it in my computer files but there is no Tones menu in the library of iTunes. I've tried to just readd the folder but it did nothing. I have my phone set to manually add music and videos and so each time I try to check sync tones it tries to erase everything else and remove the manual option. And without the tones menu I can't find the ringtone to manually readd it to the phone.

I found my answer in another posting. There were two options. The first didn't help but the second did but both still good information.
Ringtones library is now called Tones. If you don't see Tones under the Library, go to iTunes menu EDIT>Preferences>check the Tones box under General tab, sources then click ok
iTunes>View>Show Sidebar...Tones should be listed here under Library.

Can't read PDF's in iBooks after upgrade to IOS 5

After upgrading to IOS 5 (and selecting no sync to avoid PDF's disappearing) I can't open any of my PDF's in iBooks. I can't see covers, and if I select any of them, they only change to a "selected color", but they never open. Please help.

I just opened iBooks for the first time since upgrading my iPad to iOS 5. At first, I saw all my PDFs, but the cover pages were rendered in generic text. Then... they suddenly disappeared. I had all sorts of important references, manuals, documents for a trip I'm about to take. All gone.
From what I'm reading here, it looks like I'm not getting them back easily. Even if I can use tools to extract them from a backup (now in iCloud, hmm...) I'll have to get them into another app, so I can use them. If I can't get them back from iCloud, and they're really gone from the iPad, I'm screwed.
So very un-Apple.
I'll submit a report to Apple. I hope they fix this, but I'm surprised that such a big bug got through.

TS3899 I have trouble keeping emails on inbox after upgraded to ios 7.

I have trouble keeping emails on my iphone 4 inbox after upgraded to ios 7.
It kept disappearing every week. Even though "Flagged" shows 7 mails, I can only view 2 of them, and cannot view rest of the 5 emails.
It had never happened on ios 6.
My setting is the POP for incoming/SMTP for outgoing.
Tried to fix the problem, I deleted my e-mail account(Shaw), and recreated with Exchange server, but it didn't work.
So I recreated my e-mail account with POP/SMTP again.
And set on"Never" delete from server.
It's very frustrating and please give me some solutions!

Read https://discussions.apple.com/thread/5327557?tstart=0

Can't see email message content

I was deleting old emails on my MacBook Air and now I can not see the content of my email message old or new.
What have Idone and how can I correct it please

Hello,
this may help:
Stop your Mail application from the menu: "Mail > Quit Mail"
Open the Finder and click: "go > go to folder"
Enter the following into the box, including the ~ (I recommend you simply copy-paste) ~/library/mail/v2/maildata/
Click [go] and in the Finder-window that opens, delete all files starting with the word envelope
Once deleted, restart your OS X via " > Restart"
See this screenshot for visual aid:
When you open your mail next, it will prompt to import mails. Agree with this. Now your mails ought to have their content back.

Can no longer save email messages to my files

Before upgrading to Mavericks, I could open an email message from a client, click Save As, select a folder, then save the message as a text file to the appropriate folder on my hard drive. It seems I can no longer do that. I always get a Mail error message saying "Names longer than 31 characters are not supported on the destination volume."(Even when the name is already shorter than that, I go through the exercise of shortening it.) After doing that, I click Save. Then I get an error saying "Error: Could not save to path...." which, incidentally, goes haywire part of the way through and takes it down a path that is a completely wrong folder for another client. Regardless, it doesn't save.
I've tried completely renaming the file. I've tried everything I can think of.
This used to be SO SIMPLE: Just click Save As, select the appropriate folder, then click Save.
In Mavericks, do I need to convert this email message into a Word document in order to save it to a folder?

Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder—not just its contents—to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window.
This action will delete any custom Mail stationery that you have created. If you want to preserve it, ask for instructions.
If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Can I create an email message content type?

Just want to be able to select me email message from the New Document drop down in the library.
It doesn't work.
So I tried a link content type to an email message in a document library and that doesn't work either.
Has anyone got any ideas for this?
Thanks.
Mel

Hi Cameron
I have a library that I like to put email messages into.
But I would like to create an email message that I use all the time. So, I was hoping I could add the message as a content type and have it available in the dropdown from 'New Document', just like other Word doc content types.
It doesn't seem to like this, gives me a message:
So I was hoping there was a work around somehow.
Mel
Mel

Can no longer connect to certain shares after upgrading to 10.8.4

After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
Can anyone help?
Thanks!
Jon

No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

Can no longer connect to wireless router after upgrading to iTunes 9.2

My wireless connection was fine (using MacBook). After upgrading iTunes, I can not longer connect to router/modem wirelessly - am tethered with an ethernet cable. Spent 1 1/2 hours on phone with AT&T support reseting the passwords, security, etc. A PC laptop accepts password and can connect. My iPhone still can connect. But my MacBook (OS X 10.6) will not recognize my password for the modem/router. Everything has been re-booted and reset to original settings. Also, I received an iPad yesterday and it won't accept the password for our home wireless network. The password is correct because I am using it on other devices that are connecting to the network. Any ideas?

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

Can no longer connect to SMB server after upgrading to Lion

We have a MacBook Pro that was running 10.6.8. The user upgraded to Lion, and can no longer connect to a Windows 2008 file server. (We have two offices connected through a hardware tunnel, but i do not think this is the issue.)
We have tried to connect in the Finder (smb://[email protected]/). It asks for usr / pass, and then just hangs on "Connecting to server"
We can ping, have tested these credentials on other computers, and tried other credentials on this computer, to no avail. Furthermore, we installed a fresh copy of Lion on another computer, and successfully connected, so I don't think the issue is with Lion itself.
There must be something from the previous install that did not "upgrade" properly, but I don't know which file / setting it could be. It is system-wide setting, as we have also tried another user account on this same Mac.
We've also run Onyx to fix permissions, clean out all caches, etc.
Any idea what file i can change, modify, or delete?
Your thoughts would be much appreciated.
Thanks.

Yes, but the issue is not with Lion directly; there seems to be something with the upgraded system, perhaps a legacy setting or pref... I've scoured the system to no avail. I'm actually about to reinstall 10.6 - wasted too much time on this issue.
Thanks for your help.
D

IPad 2 email not working after upgrade to IOS 6

HI, I upgraded my ipad2 to IOS 6 last night and now I am not receiving emails and it is taking a long time to send emails. The app says 'connecting' and then hangs with no email coming in and eventually get an error message... 'Cannot Get Mail" "The Connection to the Server Failed". It did allow me to create a test email and send it however it did not appear to be actually sending the email... it finally sent the test email after 15 min. I did not have any issues with email prior to the upgrade and was not getting any connection failed errors. Thanks Sue

I had a problem connecting to my exchange server. It turns out that Exchange will only allow ten devices to be partnered to your account at a time. Apparently I have a problem with new phone.(Attending the 12 step program now for treatment.) I had this message in my inbox when I logged in to check the server. "You have 10 phone partnerships out of the maximum allowed 10 partnerships. After you reach the maximum, you can't create additional partnerships until you delete existing ones from your account. To do so, sign in to Outlook Web App, click Options > Phone > Mobile Phones, and delete any unused partnerships." I followed the instructions and delted all the old accounts...problem solved.

Can no longer see email message content after upgrading to ios 6

Similar Messages

Maybe you are looking for