Can no longer see my Airport Extream

Have successfully connected to the net, both through wlan and lan. Have also connected a server to Airpor Extream. When I now wanted to install a printer to Airport Extream, suddenly the Aiport Utility wont find neither the Aiport Extream, nore the 2 Airoport Express stations that previously were there !!? I believe this again occured after a Aplle OS software update !? Any helpful ideas ?

Have successfully connected to the net, both through wlan and lan. Have also connected a server to Airpor Extream. When I now wanted to install a printer to Airport Extream, suddenly the Aiport Utility wont find neither the Aiport Extream, nore the 2 Airoport Express stations that previously were there !!? I believe this again occured after a Aplle OS software update !? Any helpful ideas ?

Similar Messages

  • Airport Utility can no longer see my Airport Express Base Station.

    Hi all the problem I have is as follows;
    I've set up my Airport Express Base Station some time ago to print wirelessly from my HP Photosmart C4280 and it was working fine.
    However recently when I've gone to print a document, even though the printer is working fine and the Airport Express Base Station is showing a green light nothing happens. I've gone into the Airport Utility and its say's it can't see the Airport Express Base Station (even though it still has a green light showing). If I unplug the Airport Express and plug it in again, the Airport Utility can suddenly see it again.
    I've successfully gone through the reset process but after a few minutes the Airport Utility can no longer see the Airport Express Base Station which means I can't print a document wirelessly. I've repeated the reset process several times with the same outcome.
    Everything was working fine up until recently, has the Airport Express Base Station developed a fault? or is there something I'm not doing.
    Any advice would be greatly appreciated.

    If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
    Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

  • Anyone have any ideas why i can no longer see my Airport express speaker  in Airtunes?

    for the last couple of days i no longer can see my itunes speaker from an old Airport Express (V 6.3) 802.11g.  Airport Utility 5.6 still lets me set it up, so I can see it there.  but for some reaason i can no longer see that speaker selection in itunes or any of my devices.  Any ideas?  Thanks.

    Hi Murray,
    What version of Acrobat or Acrobat Reader are you using? Are you trying to open the PDF files from the Finder, or in Acrobat/Reader?
    We look forward to hearing back from you.
    Best,
    Sara

  • After port forward, airport utility can no longer see my time capsule

    I tried to forward public port 1025 to private port 80 on a raspberry pi using  airport utility. But after I did that,  the airport utility can no longer see my time capsule. Wifi still works correctly. Are there any conflicts about port 1025? How to fix that other than resetting the time capsule?
    Thanks,
    Michael

    It doesn't sound like a port that is used.
    From the standard google search.. nope.
    Reboot the whole network..
    No luck tell me what OS version you are running the utility on and what model and firmware TC???
    Note with Yosemite, anything can and will happen.

  • Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi.

    Since updating my airport utility app to iOS 8, it can no longer see my base station and will not connect to wifi. My son's 4s with an older version of the app sees it and connects fine, so I know it's working. The internet works fine for everyone else in the house but my

    Please take a look at this Apple support document to see if it help solve your issue:
    iOS: Troubleshooting Wi-Fi networks and connections
    If this does not help, we would recommend that you post in the iPhone community support area, since you have an iPhone / iOS issue. The link is just below.
    Using iPhone

  • I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.

    I can no longer access my Airport Express Base Station. When I plug it in, it keeps flashing orange. I cannot see it in the Airport Utility.
    How do I fix this

    If you're comfortable resetting all settings, unplug it, hold down the reset button and keep holding it in as you plug it back in - keep holding it for another 10-20s until the amber light flashes
    Then, open airport utility, now you should be able to see the device either on-screen or in the upper left under 'other wi-fi devices'

  • Why can I no longer see my Airport Extreme router in AirPort Utility after installing Yosemite?

    After upgrading to Yosemite, I can no longer see my router in the Airport Utility application.  In Finder, my router shows up as an AirPort Time Capsule but when I try to select it, I get message saying it can't connect.  I can, however, connect to the internet through the router. 

    I reset my router and I can now see it.

  • IMac (on Ethernet) Can No Longer Stream to Airport Express (on WiFi)

    After years of reliable service, all of a sudden I cannot stream music from iTunes on my iMac, via my Airport Express, to my stereo system.
    First, a bit about my configuration:
       * iMac connected via Ethernet to a wireless router (D-Link DIR-655).
       * iMac Airport (WiFi) is turned off.
       * D-Link sets up a wireless network, and Airport Express joins the network.
       * Airport Express does not set up its own network, it's simply a client of the existing D-Link wireless network.
       * iTunes "sees" the Airport Express, and can stream audio via AirPlay.
       * iPad also joins the wireless network, and also can stream to the Airport Express via AirPlay.
       * iMac running 10.6.8, with all software updates applied.
       * Airport Express running latest firmware (7.6.1).
    Well, that was a few days ago, when "it just worked". But for some unknown reason iTunes could no longer "see" the Airport Express.
    So I took my Airport Express to the Apple Store and they did a Factory Reset, but it did not solve the problem. I figured my rather old Airport Express was failing, so today I bought a new one. The symptoms have changed a bit, but even after spending an hour on the phone with AppleCare, it doesn't work properly.
    Now, the only way the iMac can stream to the Airport Express is if the iMac also joins the wireless network. In fact, now with Airport turned OFF on the iMac, the Airport Utility cannot see the Airport Express. But here's another weird thing: when I use the IP address of the Airport Express, the Airport Utility CAN connect with and manage the Airport Express, even with Airport turned OFF on the iMac!
    I should also mention, the iPad has no issues whatsoever connecting to the D-Link's wireless network and streaming music to the Airport Express.
    This all seems like something might have changed on the D-Link wireless router. But for the life of me, I cannot figure out what setting(s) on the router might allow the iMac - over Ethernet - to stream audio to the Airport Express.
    Another thing. When I have Airport turned on on the iMac, it can "see" and stream to the Airport Express, but the music has very frequent drop-outs. Could this be related to the fact that the iMac has two IP addresses (one on Ethernet, one on WiFi)?
    My goal is to get things "back to normal", where I can turn off Airport on the iMac, and all LAN and WAN traffic from the iMac goes over Ethernet. I have a few questions (for now :-)
       * Since my iMac has two connections to my LAN using two IP addresses (Ethernet & WiFi), is that likely to cause any issues?
       * When two computers join the same wireless LAN, can they effectively talk directly to one another, or does the wireless router need to be involved every time one computer sends a TCP or UDP packet to the other?
       * Do routers (or the DIR-655 in particular) tend to have any firewalls or policies that control connections on the LAN between Ethernet and WiFi clients?
       * Since AirPlay uses TCP port 3689 and UDP port 5353, would the DIR-655 need any special configuration to "open these ports" so an Ethernet client can connect with a WiFi client?
    So, any help would be most appreciated!
    Thanks!
    Jim

    I am having a very similar issue.  I use my Airport Express (AX) to stream music from the computers on my network to my stereo via Airplay.  I have AX set up to wirelessly join my existing wireless network, which uses a D-Link DIR-655 router hooked to a Time Warner cable modem.  I can succesfully connect all of my wireless devices via Airplay, through iTunes to my AX, including two laptops and an iPhone.  However, my primary desktop PC, which does not have a wireless card is linked directly via ethernet cable to my D-Link router, and it is not able to see my AX.  Similar to your case, I can see the Airport Express from my PC through my Airport Utility by directly typing in the IP address.  Note that the  AX set-up option to allow Ethernet clients is checked.  I also noticed that my laptops will stop detecting AX if I directly connect them to my D-Link router via Ethernet and turn off their wireless cards.  They will resume detecting AX when I turn their wireless connections back on.  I have tried every conceivable setting of my D-Link router to no avail. 

  • ITunes + Vista = my computer can no longer see my DVDrw drive...

    I just downloaded iTunes 7.6.2.9 onto my Dell Inspiron E1705 - and when I restart my computer, the computer can no longer see my Optical drive (DVDrw). I contacted Dell support, and they changed something in the regedit limits or something(I'm not a techy lol), and my optical drive was back.
    But the next day when I opened iTunes I got a message that says:
    "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    So I reinstalled iTunes.
    I restarted my computer, and it could no longer see my optical drive AGAIN. My DVDrw drive gets an error that says "This device cannot start (Code 10)." When I check for solutions it says "Could not load driver software."
    I go back to Dell support and tell them my optical drive isn't working. They do the exact same thing to fix it (deleting some limit with regedit) and it works. I open iTunes, and I get the iTunes Warning (Setup Assistant Error).
    I asked the Dell tech what the deal was, and he said iTunes isn't compatible at all with Vista.
    But according to Mac's website it is...
    Anyone know what's going on?!?!

    I am having the exact same behavior as xhollysue!
    It goes like this:
    1. Install ITunes, lose optical disk drives hardware (they don't even show up in Windows Explorer).
    2. Use RegEdit to disable Upper Filters at HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}, optical drive hardware re-appears.
    3. iTunes requires a re-install to permit CD burning, and your back to square one.
    I got the above fix NOT from a Dell technician, but, instead, from a Microsoft technician, which cost me $70.
    I would strongly urge Apple to research this issue and come up with a more reasonable workaround since (1) the iPhone is being adopted by many traditional MS users and the use of iTunes is an integral part of the iPhone technology architecture; (2) iPhone 3G is just now shipping and will bring even more into the Apple camp; and (3) iTunes is clearly a better media player.
    Come on Apple. Let's get some enthusiam and take advantage of this opportunity!

  • I can no longer see my kobo in the ADE. What do I do?

    I can no longer see my kobo in the ADE. What do I do?
    I was able to transfer my library books by downloading and then transferring them to my kobo through ADE. Now when I open my ADE my Kobo doesn't show up but the kobo is connected to my computer and I can see it in my control panel.
    thanks

    VIEW | Style Rendering > Display Styles
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "YBBD" <[email protected]> wrote in message
    news:gnhkjh$7ap$[email protected]..
    > I'm not sure what I did to make this change, but
    previously when I use the
    > property values as opposed to html code to make changes,
    color,
    > formatting,
    > etc, it could be immediately viewed without out going
    out to the browser.
    >
    > I would view with browser and maybe make a few changes
    here and there to
    > html
    > to finess, but primarily I could do all in the design
    layout.
    >
    > Now, even when I color text, it doesn't show until I
    preview in browser.
    > Changes in font size, color, etc, nothing can be seen
    until I go to
    > preview and
    > save.
    >
    > Can anyone tell me what change I made to cause this?
    >
    > Thanks for your help in advance. Sharon
    >

  • Can No Longer See User Folder in Intrnl Drive after transferring to Ext Drv

    I'm trying very hard not to freak out right now, but I can no longer see my User Folder/Home in the Finder Bar after dragging and dropping it into the my newly formatted Seagate External Drive. I have OS 10.4.11 and am trying to install Snow Leopard, but before I do I wanted to back-up my hard drive. So I plugged in the Seagate, formated it for Macs, and then dragged and dropped he User Folder into the Seagate and now it is gone!
    Would greatly appreciate advice on how to find the User Folder so I can return it to the Internal Drive AND help on how to properly copy it to the Seagate External Drive as I have been unsuccessful.
    Many thanks!

    Not really. I previously tried that already. I added Chinese (Taiwan) and moved up pre-existing English as the phone language. Also set navigation voice in Here Drive+ to Chinese. Result:
    1. Street names still shows in English (it goes with phone language obviously), like "Da Xing Rd." However, some landmarks will show in both languages. 
    2. Navigation voice is in Chinese but all the street names are announced in English, so e.g. "Da Xing Rd." is announced as "Da-Sing-R-D". ("St." will be announced as "S-T"...) (This is the same as in WP8)
    Thank you. 

  • My safari menu bar is missing --the menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc.  I think my husband (pc user) clicked it away.  Any ideas how to retrieve it?

    My safari menu bar is missing.  The menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc.  I think my husband (pc user) clicked it away when borrowing my computer.  Any ideas how to retrieve it?  Thanks. 

    I too was having the same problem However, I could access both the menu bar and the dock by hovering my mouse over them so it wasn't a huge problem but I prefered having it there anyway. I was not in full screen mode and I could still go into full screen mode if I wanted to.  I found the easiest solution was to just quit safai and restart it, but it might not work for you considering you couldn't access you menu bar either way.
    I found this article that allows you to hide/show the menu bar and the dock through TextEdit (didn't work for me) http://www.mactricksandtips.com/2009/07/hide-the-menubar-or-dock-in-specific-app s.html It is pretty old so it might not work for lion and a bit risky if you don't know what you're doing so I wouldn't really recommend doing it this way.
    And KSheppard, I know it's not really any of my buisness, but the way to get answers to a question isn't by insulting others and being quick-tempered. Even if you feel like you were insulted first, don't try snapping at people who aren't obligated to help you. Honestly, it just makes everything easier if everybody is cooperative and polite.

  • My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do

    My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do?

    "bin wide out"?
    If you mean you cannot read the code on the back of the card take it back to the store you purchased it from. If the numbers are not visable because you scratched them out I don't know if the store will replace or refund that. If you can read some of the numbers you could just keep trying a combination of letters and numbers to replace the missing ones. This will take a while depending on how many inputs are missing. You will have to use 0 through 9 and I am guessing A through Z.

  • In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are.  This is a very valuable function and it seems to have disappeared.  Anyone know where it is?

    In the latest verision of ITunes (downloaded yesterday) I can no longer see how large (in GB's) my music library or playlists are.  This is a very valuable function and it seems to have disappeared.  Anyone know where it is?

    Go to the View menu and turn on the Status Bar. If you don't see the menus, go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
    Regards.

  • I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac.  All the music is still available on my ipad.  How can i download the music on my mac?

    I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac.  All the music is still available on my ipad.  How can i download the music on my mac?

    First, are you positive it is really not there?  Have you looked in your iTunes folder in your Music folder, and in the media folders there? Do you see your media files?
    If your media are gone it is a lot easier to restore from a proper computer backup.  Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
    For transferring other items from an i-device to a computer you will have to use third party commercial software.  See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

Maybe you are looking for