Can no longer see or access Mac partition

I upgraded my iMac to 10.6.1 and then installed\configured bootcamp. Walked through the XP installation with no problem. My Mac partition\boot drive is not available in the bootcamp control panel and holding the alt\option key does not provide the 2 drives like on my other Mac. I also can not use the Snow Leopard disk. The system only boots to XP now. Any suggestions or ideas on what I can do would be welcome. I am even willing to reload ... If I can get that far.

where you able to solve this problem? I'm now facing a similar issue.

Similar Messages

I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac. All the music is still available on my ipad. How can i download the music on my mac?

I've updated to the most recent version of iTunes and I can no longer see any of my old music on my mac. All the music is still available on my ipad. How can i download the music on my mac?

First, are you positive it is really not there? Have you looked in your iTunes folder in your Music folder, and in the media folders there? Do you see your media files?
If your media are gone it is a lot easier to restore from a proper computer backup. Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself properly backed up against loss. Syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book format to see the multiple view, spread view, or single view. I can no longer see my book although I still see the collection with 418 photos

I have been working on a book and have 418 photos already in my book. All of a sudden I cannot access the book module and clicking on the multiple view, spread view, or single view does not take me back to the book I have been working on. I can no longer see my book although I still see the collection with 418 photos under collections. What I do see is a blank template for a new book and I can't find the unfinished book I started with 418 photos. It is like the new empty template is somehow covering it up. How do I get back to the book I have been working on?

Is it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection.

When I synced my phone with my mac, the music that I had in my phone got transferred to my mac. 140 songs to be exact, however I can no longer see the songs on my phone, only the purchased album I have appears. How can I get the songs I had back?

When I synced my phone with my mac, the music that I had in my phone got transferred to my mac. 140 songs to be exact, however I can no longer see the songs on my phone, only the purchased album I have appears. How can I get the songs I had back?

Connect your phone to computer, and sync like this. Check the boxes for the playlists, artists, albums you want to sync. Then click Apply. If you have enough space on your phone, you can choose Entire music library.

After downloading Mountain Lion, I can no longer print! My MAC see's the printer, even nozzle check works, but cant print anything!!

after downloading Mountain Lion, I can no longer print! My MAC see's the printer, even nozzle check works, but cant print anything!!

sorry!!! It is a Epson Stylus Photo PX810FW.
Have made sure all ML / Apple updates are done. Checked the Epson site and there are no updates for 10.8

Can no longer see Windows PC in Finder

Ok, we have 3 macs and (1) PC on a network. We connect to the printer via the PC. Everything has been smooth up to 2 days ago. We can no longer see the PC in finder, in turn we can no longer access the shared printer. We have made no configuration changes. However, Security Update 2007-09 was installed on 1/15. This is the day we could no longer print to the PC. Any ideas or can I uninstall the update. Thanks

Tom,
you have accidentally posted in the iPhone forum. You might want to try re-posting in the MacBook forum.

ITunes + Vista = my computer can no longer see my DVDrw drive...

I just downloaded iTunes 7.6.2.9 onto my Dell Inspiron E1705 - and when I restart my computer, the computer can no longer see my Optical drive (DVDrw). I contacted Dell support, and they changed something in the regedit limits or something(I'm not a techy lol), and my optical drive was back.
But the next day when I opened iTunes I got a message that says:
"Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
So I reinstalled iTunes.
I restarted my computer, and it could no longer see my optical drive AGAIN. My DVDrw drive gets an error that says "This device cannot start (Code 10)." When I check for solutions it says "Could not load driver software."
I go back to Dell support and tell them my optical drive isn't working. They do the exact same thing to fix it (deleting some limit with regedit) and it works. I open iTunes, and I get the iTunes Warning (Setup Assistant Error).
I asked the Dell tech what the deal was, and he said iTunes isn't compatible at all with Vista.
But according to Mac's website it is...
Anyone know what's going on?!?!

I am having the exact same behavior as xhollysue!
It goes like this:
1. Install ITunes, lose optical disk drives hardware (they don't even show up in Windows Explorer).
2. Use RegEdit to disable Upper Filters at HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}, optical drive hardware re-appears.
3. iTunes requires a re-install to permit CD burning, and your back to square one.
I got the above fix NOT from a Dell technician, but, instead, from a Microsoft technician, which cost me $70.
I would strongly urge Apple to research this issue and come up with a more reasonable workaround since (1) the iPhone is being adopted by many traditional MS users and the use of iTunes is an integral part of the iPhone technology architecture; (2) iPhone 3G is just now shipping and will bring even more into the Apple camp; and (3) iTunes is clearly a better media player.
Come on Apple. Let's get some enthusiam and take advantage of this opportunity!

Can No Longer See User Folder in Intrnl Drive after transferring to Ext Drv

I'm trying very hard not to freak out right now, but I can no longer see my User Folder/Home in the Finder Bar after dragging and dropping it into the my newly formatted Seagate External Drive. I have OS 10.4.11 and am trying to install Snow Leopard, but before I do I wanted to back-up my hard drive. So I plugged in the Seagate, formated it for Macs, and then dragged and dropped he User Folder into the Seagate and now it is gone!
Would greatly appreciate advice on how to find the User Folder so I can return it to the Internal Drive AND help on how to properly copy it to the Seagate External Drive as I have been unsuccessful.
Many thanks!

Not really. I previously tried that already. I added Chinese (Taiwan) and moved up pre-existing English as the phone language. Also set navigation voice in Here Drive+ to Chinese. Result:
1. Street names still shows in English (it goes with phone language obviously), like "Da Xing Rd." However, some landmarks will show in both languages.
2. Navigation voice is in Chinese but all the street names are announced in English, so e.g. "Da Xing Rd." is announced as "Da-Sing-R-D". ("St." will be announced as "S-T"...) (This is the same as in WP8)
Thank you.

My safari menu bar is missing --the menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away. Any ideas how to retrieve it?

My safari menu bar is missing. The menu bar for desktop, HD, and apps appears, but when I click on Safari, it disappears, so I can no longer see my buttons for History, etc. I think my husband (pc user) clicked it away when borrowing my computer. Any ideas how to retrieve it? Thanks.

I too was having the same problem However, I could access both the menu bar and the dock by hovering my mouse over them so it wasn't a huge problem but I prefered having it there anyway. I was not in full screen mode and I could still go into full screen mode if I wanted to. I found the easiest solution was to just quit safai and restart it, but it might not work for you considering you couldn't access you menu bar either way.
I found this article that allows you to hide/show the menu bar and the dock through TextEdit (didn't work for me) http://www.mactricksandtips.com/2009/07/hide-the-menubar-or-dock-in-specific-app s.html It is pretty old so it might not work for lion and a bit risky if you don't know what you're doing so I wouldn't really recommend doing it this way.
And KSheppard, I know it's not really any of my buisness, but the way to get answers to a question isn't by insulting others and being quick-tempered. Even if you feel like you were insulted first, don't try snapping at people who aren't obligated to help you. Honestly, it just makes everything easier if everybody is cooperative and polite.

I can no longer see my account name, but get a Guest user account, I can no longer see my account name, but get a Guest user account

I can no longer see my account name so I can gain access to my information, but now all I get is a Guest user account and it won't let me log into that account. All it lests me do is re-start the computer and use it in restricted mode. Can someone please help me!

Recommendation for your consideration
Hopefully your original user account was an "administrator". I have two admin accts in case one admin. acct gets "trashed.
Lets see what other forum members offer: my solution requires use of terminal and works. CLI (Command Line Interface) might be intimidating for you but we'll see what others possibly offer.
As I say the solution I have works well and will allow you to create new user(s) replacing your former users whatever type they were. I promise to check back today if no solution to you is offered...
Let 'er rip and...
cheers

Since the most recent Firefox updates, I am having trouble with certain features on The New York Times website; I can no longer see certain weblog comments, or post comments, etc.

This question is admittedly a little complicated. The New York Times website has a number of weblog pages which include brief stories followed by space for readers to leave comments. You probably need to be a Times On-Line subscriber to really see what I'm talking about, but some examples would be this City Room blog: http://cityroom.blogs.nytimes.com/2011/09/02/bloomberg-cancels-radio-talk-amid-furor-over-aides-resignation/ or this Arts Beat blog: http://artsbeat.blogs.nytimes.com/2011/09/01/theater-talkback-remembering-jerry-leiber-a-reluctant-pioneer-of-the-jukebox-musical/
Since the most recent Firefox updates, when I view these pages, which traditionally have a number of reader comments at the bottom of the Times' story (or at least a space to leave a comment), I can no longer see the comments. There's simply empty. blank space. I know that the comments are there; if I open Internet Explorer and log on to the same page, the comments are suddenly visible. I don't understand where this problem has come from. I haven't noticed whether I'm missing seeing anything on other websites yet.
I also cannot post comments on other parts of the Times website; while the pages dedicated to story-specific reader comment seem to load correctly and the space to type my comment does appear, I can't actually submit the comment. Repeated pressing of the "submit" icon has no effect. Once again, this works normally in IE.
For the record, in the past week, I have changed my computer's anti-virus software from McAfee to Norton 360. I run Windows XP. If there's any another information I can provide, please advise, as I vastly prefer running Firefox to IE.

If it happens again then try to reload the website or clear the cache and the cookies from that website.
Reload web page(s) and bypass the cache.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
*http://support.mozilla.com/kb/Deleting+cookies
*http://support.mozilla.com/kb/How+to+clear+the+cache

Imac and Macbook pro can no longer see one another

I'm not sure why, but all since I upgraded to Yosemite, I can no longer see my iMac on my Macbook Pro and vice versa. I could always see the computer that I needed to connect to in finder, or I could connect with my iCloud password. As of today, I can no longer access my iMac from my Macbook Pro and that's a problem. If someone could provide directions (dumbed down version) explaining how to connect the computers from scratch, I would greatly appreciate it. I am fine with setting it up again but I can't recall how I did it. Thanks so much. I did upgrade both my iMac and MacBook pro to Yosemite over the weekend.
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 G
SMC Version (system): 1.59f2
Model Name: iMac
Model Identifier: iMac11,3
Processor Name: Intel Core i3
Processor Speed: 3.2 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 4 GB
SMC Version (system): 1.59f2

Ensure Sharing preferences are set correctly for both devices.

Since upgrading to Lion i can no longer see other computers in my network and vice versa. What has gone on?

As the title suggests! I can no longer see any of the computers in my network, Mac or otherwise.
I have checked sharing permissions on all required computers and all seems to be good and have disabled firewalls.
I notice a few people have had similar problems with screen sharing but I am not even seeing another station to pottentialy share a screen with!
MBP 2.4GHz Intel Core 2 Duo
OS X - 10.7

Regarding the printer:
From: sterling r: https://discussions.apple.com/thread/5506493?tstart=0
If that does not help then from braden85:
This first article is about changing or updating printer software in Mountain Lion, and can be found here:
OS X Mountain Lion: Change or update printer software
http://support.apple.com/kb/PH10622
This next article tells you where to find the printer software for your specific printer brand:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669

After update to iPad I can no longer see how I can easily transfer from Auria to PC

After iPad was updated I can no longer see how I can see and work with my Apps in Itunes and I need to do that.
I need to be able to upload files to Goodreader and right now I need to download a file recorded in Auria.
Previously I could easily find my file but now I cannot get access to my iPad/apps
Any suggestions?

Regarding device visibility in iTunes try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
Once the device shows in iTunes you should be able to access the file sharing area from the apps tab of the device when connected.
You may find the apps in question are able to transfer files into Dropbox which might provide an alternate transfer mechanism.
tt2

Can no longer see projects in library viewer in imovie '08 and need to find a different apple editing program

Can no longer see projects in library viewer in imovie ’08 and need to find a different apple editing program
I had approximately 15 projects that I can no longer see in imovie. I have read almost every thread on this community for imovie regarding error messages associated with looking for clips. In each case I have rebuilt the project. However, today I continually received a message to search for a .dv file. I have located the file and even changed the .dv file to .mov file and yet none of my projects will appear. I have rebooted, deleted the plist and nothing works.
I was planning on buying a new Mac in 2014 with new editing, and use my old Mac as a backup for imovie files. Very frustrated that I can’t work with any projects now! I se the files in my Movies/imovies/iprojects folder but they don’t appear in the viewer.
Does anyone have a suggestion on how to get back my projects into the viewer? Or, can someone recommend a basic program compatible with imovie 08 that I can use to import my exiting projects into?

No, Wasn't sure if I could continue to upgrade to 9.0.9 since my Mac is relatively old.
Just don't understand why I have to keep starting a project over and over again. As I type this, the imovie icon is jumping and asking for "clip 135-02-05-05;27:15" cannot be found. Without this file, the movie cannot play properly." I have located this clip and pointed imovie to the clip, and nothing happens. I even try to locate the corresponding clip in the event viewer but it is not there.
Today is the first time I have not been able to see my projects in the viewer.

Can no longer see or access Mac partition

Similar Messages

Maybe you are looking for