Can no longer set Date and Time to Automatic

anyone else having this issue. Initially I turned it off because the iPad always ran about a minute slow.
After I got the 3.2.1 update I thought I'd switch it back on to see if things had improved but the option is totally gone.
Have restarted the device, restored from iTunes but still had no luck.
Any ideas?

Yeah they must've taken it out. I see there are few discussions here about the iPad losing time when set to automatic. I was usually about a minute out from all my other devices. Now that it's set manually it does seem to hold time better.

Similar Messages

Can not set date and time

i can't not set date and time i live in florida and i am visiting hawaii.Brought my apple tv and airport express , created my own network to watch my apple tv but unable to set date and time on my apple tv.Pleas help.

Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

Is there a way to force time can only be set to "Set date and time automatically"?

I am using OS X 10.9 .5 , and here is what I want to do.
When you click "Open Date & Time Preference", you will find an option that states "Set date and time automatically". And of course you can chose not to do that, and adjust the time.
But can you remove that option? So your OS X is forced to chose the mode "Set date and time automatically" no matter what you do? (aka you can't adjust the time by yourself now.)
Is that possible? Is there an app that can achieve this goal or can you do that at Terminal?
Thanks in advance.

There's a similar setting in iPhoto preferences (in iLife '08 versions and later), or in Image Capture preferences (if you're using iLife '06 or earlier). Check those settings as well.

I bought my apple tv in USA and use in Indonesia, but I can't set date and time.

How to set date and time so I can Home sharing with apple tv .

Call the shop in NYC and find out.

Can not set date and time on a new Apple TV

can not set date and time in a new appletv

Hello lfsalas55,
You may need to verify that TCP port 123 on your router is open and available for use by your Apple TV.
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Cheers,
Allen

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

Just updated to new iOS 6 on iPhone 3G. Get 'can't connect to iTunes' message. Tried the setting date and time trick but still no success. Any suggestions for 3G iPhone?

also must mention i have never had trouble that i couldn't fix on itunes but all of this has started since i have been using icloud for basic backups hope this helps solve problem

HT3180 Can't set date and time on apple tv

I cannot set date and time. Help!

It is having trouble connecting to the network. Make sure location is set correctly. DNS should be set to automatic (settings - general - network). If on wifi try ethernet. Reboot ATV and router.

Can Iphoto display the date and time of a pic on the pic?

I know I can get info and see a pics info, but can Iphoto display the date and time of a pic on the pic itself?

Use the Photos->Batch Change menu option to set the Title to Date and Time. That will give you what you want under each thumbnail.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: iPhoto 8's new option in the library rebuild pane, "Rebuild the iPhoto Library Database from automatic backup" may make this tip obsolete. We'll know when users have occasion to use it and see if that's the case.

How do I set date and time on apple tv?

How do I set date and time on apple tv?

Fixed the same problem, STEPS
1. Reset your apple TV
2.It will again stuck on that setting, ignore it by press menu
3. Unplug ethernet wire
4. Try to connect with wifi, it should be work with wifi connection as mine.
5. Then you can switch back Ethernet wire after get fixed.
Thanks. Lemme know dude if it's work.

"RT Set date and time" does not set seconds in UTC mode

Hallo,
I tried to set the time on my cRio 9012 with the function settimeUTC which is used by the "Set Date and Time" vi. But the seconds I enter are ADDED to the current time and not set as new value.
Even the vi shows this behaviour: I set up a vi in which the time is set in a loop (100ms delay) and read again. When I set local time the clock stops (as expected) but when I set the UTC time the seconds keep on running...
Can anybody help me with that problem???
Thanks
Florian
Solved!
Go to Solution.

Hi Andreas,
well it does not matter if I set a time zone in the MAX or not. In my example I was working on UTC + 0 but even when I set it to my local time (UTC + 1) I get the same behaviour modified by one hour.
My LabView Version is 8.5. In in the MAX under Software-> LabView-RealTime it says that I am using 8.5.0.
I suspect that the settime.out which is installed on the cRio is probably the root of the problem as VxWorks itself does not offer a function (at least I did not find one) to convert from broken down system time to system time in seconds. There only exist one to convert from broken down local time to system time in seconds ( mktime() ). The reverse function is available for both cases: gmtime() and localtime(). I also did not find a way to find out the offset of the local time. So I have to use the library function settimeUTC() from settime.out.
As I offered I can send you the settime.out file from my cRio for reference or maybe you can tell me how to find out what the version of the file is. It seems not to be an ELF file as I looked inside it to find some timestamp or version info...
Thanks so far
Florian

How do I change the "Set Date and Time Automatically" server

Is there a way to change System Preferences/Date & Time/Date & Time/Set date and time automatically from "Apple Americas/U.S. (time.apple.com)" to another time server instead?

sig wrote:
The menu has a drop down. But if you know the address of another time server I would think you can type it in.
Yeah, that's not really a menu, but a "combo box", which is a combination of an edit field and pop-up menu. So you can choose from existing items or just type in whatever time server you want.
charlie

Set date and time

I recently updated the apple tv .It was fine after the update although i did not use it as i was on my way out after the update.Days later when i put in on it cant seem to open itunes.reason being network time cannot be updated.i tried sighning out and now i cant sighn in.I tried reset that just brings me to a halt on screen that says activating setting date and time.Does any one know whats going on.Is the time server down ? Or something .Itune store sighn in works well in my pc ,ipad and other devices no problem.
And i tried putting off all firewalls in router but no luck.
Its connected wirelessly to the same router which normally works
Any idea guys

HI
I have tried everything possible such as router firewall settings changing DNS servers using WIFI and ETHERNET nothing works.Waited for more updates nothing so far.The only solution is to down grade the firmware through itunes .Using now 5.0.2 works like a charm .Don't wait any longer just search apple forum for procedure and follow.Use a mac better.It takes only 5 minutes for the process.All you need is a mac or windows pc,usb cable,the type that goes behind the apple tv,(I used a blackberry bold 9900 original cable),software known as ipsw.YOU DONT NEED TO POWER THE APPLE TV WHILE DOING THIS.IT WILL LIGHT THE LED FROM PC POWER.GO TO https://discussions.apple.com/thread/4419016?start=0&tstart=0 Read procedure written by cwlown .JUST MAKE SURE FOR MAC HOLD OPTION KEY DOWN THEN CLICK RESTORE .POINT TO THE DOWNLODED ipsw AND RUN.FOR WINDOWS HOLD SHIFT THEN CLICK RESTORE .POINT TO Ipsw download and run.There is no neen to unzip or extract ipsw.I had a problem when using windows xp ipsw did not show up as an upgradeable firmware therefore could not run it.I did not want to waste time and used the mac instead.I think renaming the ipsw in windows could have cleared the problem.Another thing is after the downgrade itunes will say that your APPLE TV is restored to its factory defaults don't worry the job is done ,check your software on the APPLE TV THROUGH your tv LOCATED at general then about.SETTING up the ATV first connect the wifi or lan cable select location first THEN sign in.

Set Date and Time Automatically...doesn't

We've noticed that the setting to automatically synchronize date and time to Apple's time server doesn't work if the system preference is 'locked'
In other words, if the user that's logged in currently, isn't an admin user, then the machine doesn't set the date and time automatically.
As soon as you unlock the system preference by clicking the padlock at the bottom, the date and time sync as they should.
Anyone else noticed this?

We do want the clock correct. The issue here is that the internal clocks drift - as I understand it, this is the one of the main reasons behind using a network time server.
With the Date and time preferences set to 'Set date and time automatically', the but with the lock at the bottom corner locked- it's as though being locked is preventing the automatic date and time settings from updating.
But the preference is checked on, and so the clock should be 'resetting' itself as necessary.
To give an example- say the machine has been off for a while, and unplugged. This will cause the machine not to know what the Date and Time is. When the machine starts up, the preference should kick in, and the machine should 'Update date and time' automatically.
But it doesn't. So long as that padlock is locked, even though the preference is checked on, the machine will not alter the date and time - until the padlock is unlocked.

The apple tv is stocked at setting date and time

I Updated the Apple TV and now it requested to start the configuratio all over again and is stocked at setting date and time, can somebody help me?

http://appletv2.com/stuck-on-setting-date-and-time-fix/

Geting and setting date and time in oracle using jdbc

can u send me a sample snippet which shows me how to set date and time to a column in oracle database where the column datatype is date.
and also send me the sample code to get the date and time from the above said column
thanks in advance

If you want DATE with time normalized to midnight, use java.sql.Date. If you really want time, with hours/minutes/seconds/millis, use java.sql.Timestamp.
As for the best way to interact with the database, use java.sql.PreparedStatement and its get/setDate and get/setTimestamp methods. Those will escape dates for you properly.
Look for a JDBC tutorial on-line to see how to do this, or http://www.javaalmanac.com for the java.sql package examples.
%

Can no longer set Date and Time to Automatic

Similar Messages

Maybe you are looking for