Can no longer sync iPad2 after updating to ios7

When I looked for upgrades for my apps there was the ios7, asking me if I wanted to upgrade and I wish I hadn't. I lost all email function on my ipad, and it erased all previous emails stored on there. I can no longer sync my iPad, since my computer is an older iMac with version 10.5.8 OSX and is not linked to iCloud so now I cannot backup NOR sync my iPad. I am very ******. Does anyone know how to dump ios7 off the ipad and go back to ios6? OR how to fix any of these problems without me buying a new iMac? I cannot upgrade my iMac to the latest OS, it's too old. Thanks for ANY help. ANYTHING would be appreciated.

All,
When I navigate to the U310T (touch) on the support site, I'm not finding a BIOS update.
It may be that we have removed it.  The U310 (non-touch) does still show BIOS 65 available here for Windows 8/8.1 and BIOS 21 on the same page for Windows 7.
Is it possible that you have a touch model and applied the non-touch BIOS?
Mark
ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
Mark Hopkins
Program Manager, Lenovo Social Media (Services)
twitter @lenovoforums
English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

Similar Messages

  • Can no longer browse network after updates

    I finally got the Migration from SBS 2003 to Server 2012R2 standard finished but after updates I can no longer browse network from the server, it was working fine before the 52 updates went on.
    I have checked computer browser is running, DNS is working, check FDRP is running.
    Have Googled many articles regarding this and tried a lot of the solutions to no avail. 

    Hi,
    On current situation, please also refer to following steps and check something more.
    1. Please check if NetBIOS over TCP/IP is enabled.
    2. Please temporarily disable Firewall and monitor the result.
    3.
    àI have checked computer browser is running
    Please temporarily stop Computer Browser service and then re-start it. Any difference?
    4. Please follow the path: Control Panel-> Network and Sharing Center-> Change advanced sharing settings, then check if turn on
    Network discovery and File and printer sharing.
    Meanwhile, would you please run
    net view command and let me know the result? (Please hide all protected or private information.)
    If any update, please feel free to let me know.
    Hope this helps.
    Best regards,
    Justin Gu

  • How can I get the apps store on my iPad2 after updating to ios7

    My App Store icon disappeared after updating to the latest iOS version. how do I get it back?

    Check: Settings - General - Restrictions - Installing Apps = ???

  • Can not open itunes app after updating to ios7

    i updated to ios7 and now i can not open the itunes app.  it keeps crashing.  anyone else having this issue?  need help

    Hi,
    Close the App Store app and the iTunes app by pressing the Home button twice, and swiping them up.
    Then go to Settings > Safari > Clear Cookies and Data
    Open the apps again.
    I'd recommend as well to sign out and in using Settings > iTunes & App Store
    Hope that helps.

  • IPhone 4 will not sync movies after updating to ios7???

    I have not been able to sync my movies and videos on to my iphone since i updated to ios7. Also been having problems syncing music, the process never starts adding the files....

    This is almost embarassing. For some totally unexplainable reason all the songs in iTunes were unchecked. I was considering syncing the whole iTunes library to my iPnone, tut even with the 32 Gb version it would not hold it all. I restarted my MBP, and the message about the unchecked songs came up. It obviously is not enough to have songs checked for the iPhone. Thanks anyway.

  • Can no longer use SMS after update to IOS 8.2

    what at happened with the update to SMS messages on the iPad?
    I was able to use SMS as well as iMessage on my iPad until I updated it to 8.2. Now I cannot use SMS at all. In settings -messages, there is no longer a toggle for "send as SMS" on/off as there used to be and as there still is on my iPhone after the update. There is also no longer a toggle for "MMS" Messaging nor Group messaging.
    As I said, my iPhone is fine after the update.

    IN your iPhone go to settings-messages-text mmessage forwarding. Tap on that and tap on the green toggle to turn it off.
    THen go go back out of setting and then go back in and repeat the steps again and turn that option to forward text messages back on.
    you will then get a message to put in a code that appears on your iPad. Look at your iPad and the message will be there with the code that you need to put in your phone.
    ENter er that code in your phone and it should work.
    THe he only thing is that I don't remember if I turned my phone off and then back on after I turned the setting off and then back on again before I turned that text forward setting back to on. So if the above does not work then try turning your phone off and then back on in between.
    I Hope this fixes it for you. Let me know!

  • IdeaPad U310 touch: Can no longer enter bios after updating to latest version

    I flashed to the latest U310 bios (http://download.lenovo.com/consumer/mobiles/65cn99ww.exe). I switched to "legacy boot mode" (from UEFI), in an attempt to workaround a driver issue. Now, I'm no longer able to enter BIOS whatsoever. There are plenty of forum posts by many users hitting the same or similar issues on U310/U410/U330 and similar ideapad products. But the resolutions where they exists are either invalid, or involve flashing to 65cn99ww.exe, which is not possible.
    [Environment]
    Lenovo IdeaPad U310 touch, Windows 8 (also tried Windows 8.1)
    [What I did]
    Flashed BIOS using official Lenovo bits (65cn99ww.exe). No errors occured
    Enter BIOS afterwards and change to legacy boot mode (from UEFI)
    [Problem]
    Cannot enter BIOS to view or change any settings.
    [Debugging]
    Try to enter BIOS by key button sequence.
    1. Tried the following combinations during bootup: F2, Fn+Fn, F10, Fn+F10, F1, Fn+F1, 'B', 'N', Fn+'B', Fn+'N', Delete, Esc.
    ==> No change in behaviour. I tried each many times in case the timing is important.
    2. Boot by Novo button. This brings up a menu, which includes an entry to enter BIOS. However, choosing that menu entry boots to Windows
    3. Reboot to UEFI firmware settings from Windows (Settings/General/Advanced/UEFI). I can choose to boot to UEFI settings, but ultimately, just boots to Windows 8.
    4. Try to reflash BIOS. Fails with error 182: Version less than or equal. So reflash fails
    5. Try to reflash old BIOS. Flashing fails
    6. Unplug battery from motherboard for 1 minute. No difference in behavior
    7. Boot with SATA disconnected.
    8. Try various flashing options and alternate ways to flash. Not successful
    [Conclusion - BIOS is faulty] 
    I think this problem can be solved easily with a slightly newer variant of the BIOS being officially released by Lenovo. If someone from Lenovo is reading, can you please open an internal case on this.
    Otherwise, I'm open to suggestions from the community. Does anyone know how I can hex edit the bios version #.
    Thanks
    Solved!
    Go to Solution.

    All,
    When I navigate to the U310T (touch) on the support site, I'm not finding a BIOS update.
    It may be that we have removed it.  The U310 (non-touch) does still show BIOS 65 available here for Windows 8/8.1 and BIOS 21 on the same page for Windows 7.
    Is it possible that you have a touch model and applied the non-touch BIOS?
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Applications can no longer play audio after update | VAIO VPCCW21FX

    I'll make this as quick, clean, and to the point as possible. Also, please forgive me because I haven't used Arch in over 3 years, so a lot of things are different.
    - I am on a Sony VAIO VPCCW21FX.
    - I installed using the AUI script (which is absolutely wonderful, I might add).
    - I am using Gnome 3 as my desktop environment.
    - I can hear system sounds out of my speakers and headphones, but no applications appear to produce sound.
    - This started a couple of days ago after a system update.
    - ALSA and Pulse seem to be set up properly.
    - Alsamixer shows my sound card and allows me to configure output/input.
    - PulseAudio Volume Control also shows my card, and allows me to configure output/input.
    - Gstreamer and it's dependencies and codecs are installed.
    - Mplayer and it's dependencies and codecs are installed.
    Here is the output of lspci -v | grep -A7 -i "audio":
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
    Subsystem: Sony Corporation Device 9072
    Flags: bus master, fast devsel, latency 0, IRQ 42
    Memory at e8e00000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: [50] Power Management version 2
    Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
    Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
    Capabilities: [100] Virtual Channel
    01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
    Subsystem: Sony Corporation Device 9072
    Flags: bus master, fast devsel, latency 0, IRQ 16
    Memory at e3080000 (32-bit, non-prefetchable) [size=16K]
    Capabilities: [60] Power Management version 3
    Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
    Capabilities: [78] Express Endpoint, MSI 00
    Kernel driver in use: snd_hda_intel
    And yes, the CLI speaker test that plays white noise works.
    It seems to be a codec issue to me, but I have no idea what codecs would be conflicting with each other. If anyone knows of a remedy, or can point me in a general direction, I would be very grateful. Thank you.
    Last edited by mikeycriggz (2013-12-19 13:11:28)

    Try a new cable.

  • Cannot sync Ipad after updating to ios7! Please help!

    I just updated my family's Ipad, called "Soy's iPad" to ios7. I created a backup on my iTunes account just before I updated. Now, when trying to sync my Ipad after downloading ios7 iTunes gives me the error:
         "The iPad "Soy's iPad" could not be synched because this computer is no longer authorized for purchased items that are on this iPad.
           To authorize this computer for items purchased from the iTunes Store choose Store > Authorize this Computer."
    So I authorize the computer and iTunes gives me the message "This computer has already been authroized." So, naturally, I try to sync the iPad again. It gives me the same "computer is no longer authorized" error message. It's an infinite loop. Please help me get my data back on my iPad.
    Signing out and then back in to iTunes does not help either. Also, under my iTunes account under manage devices, Soy's iPad does not even show up as one of my devices anymore. How to I add my iPad back as an authroized device on my Apple ID?
    Is anybody else having this error?
    Any help would be greatly appreciated since there are many cherished memories along with important data on my family's iPad. Please help me get my iPad working again! 

    Your iPad is not syncing with iTunes now and before it does start to sync and before you create a backup that overwrites the current backup that holds all of your data and camera roll photos, you should probably turn off autosync. I should have thought of that before, but if the iPad isn't syncing, no damage has been done.
    Launch iTunes and go to Edit>Preferences>Devices. Check the box at the bottom that says - Prevent iPods, iPhones and iPads from automatically syncing. Click OK.
    If it doesn't make that much difference to anybody, you could try deleting the app and see if that will let you sync after you delete it. You will lose all of your progress in the game if you delete it, but - if you did create a backup before you updated - then your game progress should be included in that backup.
    BTW, did you try restoring from the backup that you created before you updated, and then try to sync with iTunes? Restoring form that backup should restore the old settings that were on the iPad and the iPad was syncing properly while using those settings.

  • Can't open my ipad after updating to ios7. Touch screen not working, can't swipe to unlock.

    I just updated to ios 7. Upon rebooting after the update, I can't swipe the screen to unlock the ipad. I tried to hard reset but it still doesn't work.

    See Get iPhoto 9.6.1 if you didn't update before OS X 10.10.3, a user tip by Barney-15E

  • Sync issues after updating with ios7

    I downloaded ios7 to my iphone and after performing the usual sync with my PC, my tasks and calendar appts from Outlook have now all been wiped.  Sure, there all there now on my iphone and in iCloud, but how do I get them back on my PC - Outlook, since that was the original source?

    I am having the same issue.  I use it for my business so that all the employees have the appointments both on their computer and on their iPhones.  System worked great until ios7 messed everything up.

  • Itunes can't find my iphone after updating to ios7 !

    iphone 5
    last update of itunes !
    i tried to update to ios 7
    Now , my iphone just can't connect  with the itunes !
    and it show the picture of the caple and itunes !!
    what should i do !!!!!!!!!!
    i don't know what's wrong !
    please help i feel bad

    make sure you have itunes 11.1 installed

  • Can I get ios6 back, after update to ios7?

    It's to hard to see My calender and the Keyes on the Keyboard, My background photo's docent fit, my headset do not work in TomTom, only when I have a call, but then, I can't stop the app, to stop guidens to interfeair. I believe "Steve" would not let ios7 pass like this!

    The colors look like tacky, out of date, 1970's pastel tennis clothes. The keyboard is very hard to see, and the borderless everything is the poorest man/gadget interface I've ever seen. This has go to be somebody's idea of a joke.
    Tell me there's a way to fix this ****.

  • I can't sync my ipad2 after updating to ios5. Says 'waiting for changes to be made'. Any ideas?

    I can't sync my ipad2 after updating to ios5. Message is 'waiting for changes to be applied'. Any ideas?

    Have you tried doing a Restore?
    For some problems the solution is to download & reinstall iTunes.
     Cheers, Tom

  • TS4062 After installing the lastest update to my ipod touch I can no longer sync my ipodto my computer no matter what I do.  I believe it has to do with the password for my ipod and the possibly the password for my itune account.  If anybody has any sugge

    After installing the latest update to itunes, and my ipod, I can no longer sync my computer and my ipod nomatter what I do.  I have tried everything I know and can read.  I am beginning to think it has something to do with the password that I changed, but I tried to change it back and nothing happens.  Does anybody have any suggestions.  I have been working on this for three hours and I can't figure it out?  Apple is no help and it was their updates that messed the whole thing up.
    Kathy295

    http://kb.mozillazine.org/New_messages_do_not_appear

Maybe you are looking for

  • Error using XSLt Transformation

    Hi, I am using a servlet to get some results from the web which will be a XML file pass it to a XSLT Processor to covert it into a html doc .The code is compiling but when I run the servlet,i am getting following error. Can anybody tell me how to sol

  • Raw files in aperture photo books

    Hi, I'm creating my first aperture photo book. I uploaded raw files to aperture, made adjustments, and then placed the versions into the book. It is these versions (with all crops, adjustments, etc.) that will show up in my photo book, correct? (That

  • Facebook log out

    How do I log out from Facebook on an N97? I'd like to sign in as another user but I can't seem to figure out how to log out. Solved! Go to Solution.

  • MR11- no range

    Hi, When we use MR11 transaction and try to clear a document we get Error: "The interval of the number ranges 04 for the object RE_BELEG does not exist." I have checked in OMR4,Document type is KP and 04 mumber range is not assigned in this compnay c

  • Unable to complete this operation error

    Hi, I installed Firefox 4 and when I go to my HP printer properties and click on Printer Services I get "Unable to complete this Operation" error. If I uninstall Firefox it works fine. When I reinstall Firefox I get the same error. Any help would be