Can no longer telnet to my Cisco 2924 xl

Hi,
I have a Cisco 2924 XL where port 24 is trunked to another port on Cisco 3750. Both interfaces are up, but I can no longer telnet til the switch. I get this error message "VLAN-4-VTP_INTERNAL_ERROR: VLAN manager received an internal error 26 from vtp function vtp_download_info: Inconsistant TLB (translational bridge) VLAN IDs". Tanks in Advance

Hi,
This is typically indicative of a corrupt vlan database.
Try this:
Rename the file on flash called vlan.dat to something different like vlan.old, then reboot the switch and rebuild your vlan database and see if the errors come back. If the errors do not come back you can delete vlan.old (or whatever you named it) and run off of the new vlan database file in flash.
HTH,
Bobby

Similar Messages

  • Can no longer connect via serial port

    Hi all,
    I am an administrator for forty-eight Solaris servers scattered around the world, I have remote console connectivty via Cisco 2821 terminal servers. Recently all the devices were moved to new terminal servers but I can no longer get remote console connectivity to fourteen of them. Most of the servers just give a blank line. I have had the port and cable changed on two of them with no joy. One of the servers was local so I risked a reboot (didn't fancy rebooting one of the distant ones as hands-and-eyes support staff are difficult to get hold of and these are production boxes.). While connected via IP I attempted a reboot, after 20minutes of waiting I decided I'd have to connect directly with my laptop, when I connected the machine was waiting for an ilom login. After logging in and completing the boot the server was working fine and I could connect via the terminal server.
    The boxes are Sun 5220's and I am running Solaris 10.
    Any help would be greatfully received as I really don't fancy trying to reboot the other thirteen boxes with nobody onsite...
    Cheers,
    Mark T.

    Answered my own question:
    opened another terminal window and used the command killall ssh to abort the previous session.
    Still don't know why it won't login to my server.

  • Can no longer connect wirelessly with other computers

    I have an iMac and a Macbook Air.  For some reason I can no longer connect wirelessly between the two. They don't show up in Finder.  Therefore I can't use "Remote Disk" on my Macbook Air to install programs.
    Recently I switched from using an Airport router to a Cisco router. Could this be the problem? I can still connect to the internet through my wireless network, but can't find my computers.

    Hello,
    All the information you need is printed on the back of the Hub. There are two passwords, one for the Wireless setting (WPA password) and one for access to the hub (Admin password).
    (Taken from http://www.jarviser.co.uk/jarviser/images3/newhubpswd.jpg  ).
    If you have forgotten what you changed the admin password to, then I'm afraid you're lost and you should factory reset your Hub:
    http://bt.custhelp.com/app/answers/detail/a_id/11386/~/how-do-i-reset-my-bt-home-hub-to-its-factory-...
    Hope this helps

  • After Mavericks OS upgrade, can no longer make any HTTP requests with the OPTIONS verb

    My machine can no longer make any HTTP requests with the OPTIONS verb. This happens whether I try it curl, postman, or ajax.
    curl -i -X OPTIONS http://www.google.com returns curl: (52) Empty reply from server
    It should return a long string containing a 405 error code.
    I suspect that this is related to the Mavericks upgrade I did earlier this week. I only have one mac (my dev machine) with Mavericks. Other macs are Mountain Lion and they don't have this problem.
    Can anyone else with Mavericks confirm whether or not they have this problem too?
    If this is Mavericks related, anyone know of a fix or workaround?

    Turns out that it wasn't Mavericks related at all. Cisco AnyConnect has a security module running behind the scenes even when you're not VPNed into anything. It was blocking my OPTIONS verb requests. I was able to make these calls after uninstalling.
    Re-installing with Web Security turned off should prevent it from happening. While I was uninstalling I did notice that there was a web security uninstall script in /opt/cisco/vpn/bin but I already committed to taking the whole app off my machine. Simply running that script could have done it too.
    I must give credit to Ben Nadel. It was his blog post that helped me fix this issue.
    http://www.bennadel.com/blog/2559-Cisco-AnyConnect-VPN-Client-May-Block-CORS-AJA X-OPTIONS-Requests.htm?&_=0.10495476494543254#comments_44093

  • Can WAE be integrated with non-cisco devices?

    So far, all documentation that I read, WAE is used in conjunction with Cisco devices.  Can WAE be integrated with non-cisco devices? 
    I guess, In-line mode should work ok, but how about off-path mode?  An example or link will be appreciated.
    Thanks!
    Joe

    Hi Joe,
    It should be possible to use WAAS with non-cisco routers, as long as they support WCCP.
    There are no documents on this because, the configuration from WAAS point of view would be the same, and the router configuration would depend on the vendor.
    Regards
    Daniel

  • Ever since the guide update, when I pause a recorded show, I can no longer unpause. Very frustrated​!

    I've had nothing but problems since the guide update. Besides my recorded shows constantly freezing, I can no longer pause anything I DVR. If I try, the picture just gets stuck. I can no longer unpause, fastforward, rewind, anything! If this doesn't get fixed soon, I'm going to be forced to switch to Cablevision. Is this happening to anyone else?

    I have been told if you power off and power on, it will allow you to resume and unfreeze the issue. I have Cisco CHS435 and have only had it happen on occasion, but yes frustrating, and will be fixed in img 1.9.1. That should not be as major a roll out as 1.9. We hope. I hope SOON, but that became a bad word.

  • ITunes + Vista = my computer can no longer see my DVDrw drive...

    I just downloaded iTunes 7.6.2.9 onto my Dell Inspiron E1705 - and when I restart my computer, the computer can no longer see my Optical drive (DVDrw). I contacted Dell support, and they changed something in the regedit limits or something(I'm not a techy lol), and my optical drive was back.
    But the next day when I opened iTunes I got a message that says:
    "Warning! The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
    So I reinstalled iTunes.
    I restarted my computer, and it could no longer see my optical drive AGAIN. My DVDrw drive gets an error that says "This device cannot start (Code 10)." When I check for solutions it says "Could not load driver software."
    I go back to Dell support and tell them my optical drive isn't working. They do the exact same thing to fix it (deleting some limit with regedit) and it works. I open iTunes, and I get the iTunes Warning (Setup Assistant Error).
    I asked the Dell tech what the deal was, and he said iTunes isn't compatible at all with Vista.
    But according to Mac's website it is...
    Anyone know what's going on?!?!

    I am having the exact same behavior as xhollysue!
    It goes like this:
    1. Install ITunes, lose optical disk drives hardware (they don't even show up in Windows Explorer).
    2. Use RegEdit to disable Upper Filters at HKEYLOCALMACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE1 0318}, optical drive hardware re-appears.
    3. iTunes requires a re-install to permit CD burning, and your back to square one.
    I got the above fix NOT from a Dell technician, but, instead, from a Microsoft technician, which cost me $70.
    I would strongly urge Apple to research this issue and come up with a more reasonable workaround since (1) the iPhone is being adopted by many traditional MS users and the use of iTunes is an integral part of the iPhone technology architecture; (2) iPhone 3G is just now shipping and will bring even more into the Apple camp; and (3) iTunes is clearly a better media player.
    Come on Apple. Let's get some enthusiam and take advantage of this opportunity!

  • Since upgrading my phone to the iOS7, I can no longer download music or apps via my phone or computer - on my phone, it wont let me accept the 'terms

    Since upgrading my phone to the iOS7, I can no longer download music or apps on neither my iphone or through itunes on my computer.  On my phone, it won't let me accept the terms & conditions.  On my computer, an error message keeps flashing up: 'Error (-50)'.  Please help?...

    Sounds like the device is in recovery mode. You will need to restore the phone. See this support document for instructions. http://support.apple.com/kb/HT1808

  • Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything

    Since reinstalling itunes i can no longer sync. Error message says already synced with another itunes library. I get a blank sync - no songs, photos ect as it comes up with this error whenever try to select what is to be synced. Help - lost everything. Complete nightmare - Apple sort a fix NOW, but will take any help

    Plawexki wrote:
    ...  do you know if the contacts, photos, messages etc will be wiped?
    Yes... Everything will be Wiped and Replaced with what is currently on Your Mac.
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/
    You may find this information of interest...
    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • After upgrade to 10.7.1 users can no longer connect to shares

    Ok , im not an admin to start off, but after upgrading the OSX lion server to 10.7.1 i can no longer connect to the sharepoints on my mac mini server.
    Through SMB or AFP .. i tried using the connect to server on one of my clients and when i attempt to log in , it shakes the login window as if my password were not accepted.
    Heres where it gets a little confusing to me, i have 2 mac mini servers both running OSX LION SERVER 10.7.1 .... The one that I CAN NOT LOG INTO is my OD Master... the second one is just used for file sharing...
    WHEN i attempt to login into the file share server (which is connected to the OD Master which is rejecting my user logins) i can connect JUST FINE and access the sharepoiints on that server...
    A couple more weird things... on the OD MASTER (again the server which is rejecting all user logins) I CAN login with my admin credentials and access the sharepoints... ??
    -- when i am locally logged into the OD MASTER server, if i add a new sharepoint from scratch and edit the ACL , NONE OF MY USERS SHOW UP nor any of my user groups... it only allows me to add the Administrator access to that share..
    Have i done something very wrong somehwere? this server that is having a problem is only used as a OD master and File share nothing else..
    I did not change any settings besides add a new mac mini server to the OD and performa the 10.7.1 upgrade.
    ANY HELP WOULD BE HUGE as i have spent a 12 hours trying to figure this out before i resort to a re install.

    I've only one hint to you, cause I've mot on Mac-Server.
    With 10.7 Apple have switched from Samba (maybe due to licence problems with GPL based stuff) to a own protocol called "XSMB"
    This had caused problems with some NAS systems too.
    Eventually someone have a glue to solve that, as several users have problems with SMB shares since that.
    Lupunus

  • After upgrade can no longer connect to Mac from Windows

    I have a wireless network (Linksys) with 2 iMacs, Ubuntu Linux and Windows XP workstations. I have file sharing between the Windows and Mac computers. After upgrading I can no longer see the shared folders on the upgraded iMac from the Windows box. I cannot even ping the iMac by node name, but I can ping it by IP address so it is recognizable on the network. I cannot connect by IP address, however.
    I have file and printer sharing enabled on the Leopard iMac. What can I do to restore the former connection?

    Thank you! That partially solved the problem. I can now see the Leopard Mac and can open my user folder on it. However, the subfolders give an error saying they are not accessible - permission denied. I have gone through the folders and set all of them to Shared, but this did not make them accessible.

  • Can no longer connect to internet w/ cell signal - advice?

    Hi, all -
    I can no longer access the internet using a cell signal on my Droid 3. Everything was working fine until about a week ago, but now I get no 3G signal at all and only one or two bars. When I turn on the WiFi, I have no trouble accessing the internet. I can make calls with no problem, but cannot access the internet or my apps.
    I have tried the following, but I am still not getting a usable wireless signal:
    ·        -  Restarted device several times
    ·       -  Turned “airplane” settings on and off
    ·        - Removed battery, replaced it and restarted
    ·        -  Dialed *228, then option 1 to activate service
    ·        - Dialed *228, then option 2 to reprogram service
    Does anybody have any other ideas? I REALLY do not want to use the "nuclear" factory reset option unless absolutely necessary!
    Thanks in advance for any help!

        dmiller28, being without data is very difficult! Your efforts are greatly appreciated and you are on the right track with the troubleshooting steps. Have you tried checking the network settings in the device? To do this you will go to: menu>settings>wireless and networks>network mode and check if it is set to CDMA. Otherwise the next step is to do the factory reset which will be the last resort option. Keep us posted, thanks! 
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • Can no longer connect to certain shares after upgrading to 10.8.4

    After upgrading to the latest version of Mountain Lion, I can no longer access certain shared volumes. I have one machine running 10.4.11 and I can connect to its hard drive. Another machine on my network runs 10.5.8, and I can now only connect to the built-in hard drive. There are also 2 Firewire drives connected to that (10.5.8) machine that I can no longer connect to.
    When I use "Connect to Server" and enter the AFP address of the 10.5.8 machine, I get a full list of "available" shares, but if I select one of the FireWire volumes, I just get a spinning "rosette" for several minutes and then a failure message. I also have an OS 9 machine that I can no longer connect to on the same network.
    I already read the "Connecting to Legacy Systems" notice and still no joy after following the instructions.
    Can anyone help?
    Thanks!
    Jon

    No NAS other than an Apple one includes native support for AFP. They all use an open source package called Netatalk that is junk. Many years ago Apple deprecated the old security modules that Netatalk uses.
    The easiest solution is to hack up Lion so that it will connect with the old security protocol. Do a search for "lion dhx2" or something like that. Another option is to update your NAS to a version of Netatalk that includes support for DHX2. That is easier said than done. Netatlk isn't as "open" as other open source packages.

  • Can no longer connect to my network and 'forget network' option has disappeared??

    Can no longer connect to my network and "forget network" option has disappeared???  (Ipod touch 5th generation). This happened on both my children's ipods. We have reset network settings but it doesn't help.

    JEM24 , your suggestion is included in:
    - iOS: Troubleshooting Wi-Fi networks and connections
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    JEM24 wrote:
    Sorry Mindi, also have your tried rebooting your router? That's all. Try that before you attempt to Restore. Cheers.

  • Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

    following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

    Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

Maybe you are looking for