Can Nokia 6233 say the Caller's Name?

I have a friend who uses N80 and whenever someone calls her, her phone can say the caller's name. I wanted to know wether it works with my one, 6233, too, coz i think its a really cool feature and i love it. Or is it only possible for phones with symbian, like her one?

So far only the newer symbian phones support this feature.

Similar Messages

How to prevent voice over saying the caller number or name automatically in iphone?

hi, i'm a new member of apple world,
i'm using voice over in my iphone 5s, when i receive a call, voice over automatically say the calling number or name with the ring tone, how can i set
voice over to prevent it saying the caller number or name ??

Same problem, which is extremely inconvenient because I like to use my earphones to listen to Pandora while I work. Not every time, but most of the time I plug in my earphones, the iPod software starts playing the last song that was played. Stopping the music via iPod or pressing the Home button for 10 seconds to force quit iPod doesn't stop the music as it will just automatically start playing again. Sometimes if I'm lucky, plugging the earphones in very quickly avoids this problem -- but like I said, it's a cross my fingers and hope I get lucky kind of thing.
I'm using the newer 3G model, which I've had for only about a month. I did not have this problem with my old 2G iPhone.
Someone in another thread said it's a hardware fault and suggested exchanging the phone for a new one. Can anyone confirm this?

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

I updated my Iphone4S this week to the newest IOS 7.1 and now everyone who calls me says the calls are not clear, muffled. Is there something I can do to clear this? 4 people in 4 different states that called me all said the same thing.

Settings > General > Reset > Reset Network Settings
Contact the carrier to troubleshoot.

How to prevent voice over saying the calling number ?

i'm using voice over in my iphone 5s, when i receive a call, voice over autamatically say the calling number or name with the ring tone, how can i set voice over to prevent it saying the caller number or name ?

It appears to be working as Apple intended. The manual says:
Moving recordings to your computer
You can sync voice memos with the iTunes library on your computer, and listen to them on your
computer or sync them with another iPod touch or iPhone.
When you delete a synced voice memo from iTunes, it stays on the device where it was recorded,
but it’s deleted from any other iPod touch or iPhone you synced. If you delete a synced voice
memo on iPod touch, it’s copied back to iPod touch the next time you sync with iTunes, but you
can’t sync that copy back to iTunes a second time.
Sync voice memos with iTunes. Connect iPod touch to your computer. Then in iTunes, select
iPod touch. Select Music at the top of the screen, select Sync Music, select “Include voice memos,”
then click Apply.
Voice memos synced from iPod touch to your computer appear in the Music list and in the Voice
Memos playlist in iTunes. Voice memos synced from your computer appear in the Voice Memos
app on iPod touch (but not in the Music app).
What yo can do is code the Voice Memos on the computer as something besides Voice Memos (Right click>Select Get Info>go to Option tap and change under Media Kind). When yo change it it will move the VM to the library for that kind e.g., Music if you coded it as Music)

When I try to sync my iPod Touch it says, "The iPod "[ipod name here] cannot be synced. An unknown error occurred (13019)." This is a huge problem. its been happening for some time now. Help me please?

Every single time, it'll do the regular sync thing then a little pop up comes up and says "The iPod "[ipod name here]" cannot be synced. An unknown error occurred (13019)." ***? I have searched all over for troubleshooting help. I'm exhauseted. Can anyone help me with this pestering problem? I've lost all the music that I bought on my iPod because it didn't sync up with my computer and when it tried to, it took everything away. Help <3 ?

I have searched all over for troubleshooting help.
Doublechecking. In the course of your troubleshooting to date, have you worked through the following document?
iTunes: Error 13019 during sync

How can i disable/hide the calling form from fnd_function.execute

Hi,
How can i disable/hide the calling form from fnd_function.execute.If so can any one give the syntax.
thanks

Hi Francesco,
Are you talking about that ??? )) It will explain you about to get the name of the web page when you are executing an abap function for determining the values of variables...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20make%20a%20variable%20even%20more%20flexible%20in%20bw-bps.pdf">How to make a variable even more flexible in BW-BPS?</a>
This is weird: I wrote that document a few weeks ago, it is theorically published on SDN but this is not possible to find it by using the research tool... Maybe because it applies only to BPS in 3.5. I did not have enough time to migrate that solution to BI-IP 7.0.
Regards
Laurent

Nokia N70 disconnect the calls and turn on the lou...

Hi Dudes,
I have Nokia N70 now i am facing the problem in N70 that is my Nokia N70 disconnect the calls and turn on the loud speaker automatically. i had gave my phone to nokia care center to fix this Bug. When i gave the phone the IEMI Number was same that is mentioned on the N70 Box, but now i have took my N70 back from the nokia care center i am facing the same problem again and my IEMI Number do not match my actual N70 Box.
I am confused and afraid that something has happened to my phone.
Please tell me what to do know...
Urgent and quick response needed

sounds like you there could of been a mix up or you got a recondintioned unit back try a factory reset and see how you get on did you not get a report from nokia?
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Can I pick up the call without staying on the Skyp...

When my friend call on my skype number from their landline or mobile, can I pick up the call even if:
1) The phone is on lock screen?
2) Skype app is not currently opening?
3) If I miss the call, can they leave a msg for me?
Many Thanks

as above bluetooth headset or hand free system like bluetooth speaker i.e.(jambox)

Iphone4 shows unlooked, but no further reaction. can call this phone but no change, can't pick up the call. sim card out - not change, nothing happend

iphone4 shows unlooked, but no further reaction. can call this phone but no change, can't pick up the call. sim card out - not change, nothing happend

No. Call Apple Care and give them the serial number. They may be able to tell you who it is locked to.

I have a new ipod and when I sign in to Words with Friends it says that user name is already in use. How can I continue using the same user name with a different ipod?

I have a new ipod and added all my apps to it. When I sign in to Words with Friends it says that "user name is already in use" because it is linked to my old ipod. How can I use the same user name with my new ipod?

Was the iPod setup via iTunes on this computer?
Setup via wifi?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method

My iphone 4 will ring but I can not speak to the caller as when I turn the volume up or down my phone says ringer(headphones) on the display

My iphone 4 will ring but when I answer it I can not hear the caller as my phone thinks I have earphones connected and if I receive a message it vibrates but does not give me any alert tone.I have reset my phone but nothing has changed

Most likely faulty battery. Make Genius Appointment and take iPhone to Apple, battery diagnostic test by Genius takes less than 5 minutes.

Nokia 5800 - cannot see caller contact name (one m...

This is a repeat of the question asked and seemingly "solved" here:
I'm starting a new topic cause the label for the topic mentioned above says "solved" in nice big green letters so people might miss this issue being raised again.
I have a 5800 XM (RM-356, software V51.0.006) with 250+ contacts...
The problem appears as in the case above, happens daily: I get a call from a number which is definitely in my contacts (phone memory, not SIM) but I still just get the number displayed and not the name of the caller.
Furthermore, if I then take the callers number as reported by my phone (with the '+' for international and all), and update the contact, nothing improves, same thing.
It gets better : my wife has the same number for her cell phone and home phone, with a different area code (smart, eh?). There Nokia definitely confuses the two, only if I erase one of them then I get her name when she is calling, though the numbers are definitely different, e.g.:
+38111XXXXXXX and +38165XXXXXXX (in the example the +381 is Serbia, and 11 and 65 are two different area codes).
This issue is driving me nuts, and not because I can't recognize my wifes number , but because of the OTHER 250+ business contacts that I get calls from daily!
I have tried everything, including doing a "hard reset" of the whole phone... not to mention it took me hours to get everything else but the contact list back to previous settings....
What is wrong here?
There has also been this advice on the Nokia forum :
unfortunately, tried all of it, and nothing worked.
To further complicate the matter, this problem appears only for a fraction of the numbers in my contact lists = some contacts I see names just fine when they call, and some I cannot get to show up no matter what...
Many thanks for all your help!

It is simply multiple entries, as you have no doubt read about, for example if you entered all your wifes numbers just to your wifes name, but as individual details they would work. So say the contact is Wife, select option edit, add detail, then you can have Mobile , home and work numbers all attached to that one contact, and caller id will work, as long as you don't have several of her work colleagues as contacts with the same works number, the failure of caller id is always due to a conflict, as the phone can only identify the number (the incoming info) and if that is attached to more than one person it just gives out the number.
To resolve the problem you need to find and remove the conflicts !
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Can you refer to the original host name when using a challenge redirect?

I have an authentication scheme that uses a challenge redirect to cause authentication to happen using https instead of http. However, this seems to break some of our monitoring scripts because now the credential challenge is coming from a different host name. Is it possible to refer to the original host name with some type of variable in the challenge redirect parameter? Below is an example:
1. User accesses secured URL at http://appstenv2.company.com/testurl
2. This webserver is hosting several aliases (appstenv2.company.com, appstenv4.company.com, appstenv6.company.com) and has a main name of appsdev.company.com - but is a single apache webserver where there is an application server plugin installed which will route to the desired application server environment based on the original hostname. So if a user accesses it with a name of appstenv2.company.com/testurl they will be routed to the "test 2" environment application server. If they access it as appstenv6.company.com, they would be routed to the "test 6" environment application server.
3. This webserver listens on both http and https.
4. The current challenge redirect can only redirect to a specific URL so it is set to "https://appsdev.company.com" which works fine interactively but the recorded monitoring scripts suddenly see a new hostname doing the prompting for credentials even though it is the same webserver - just a different alias.
5. If possible, I would want to do the redirect in a relative fashion rather than absolute by using the original hostname from the URL being accessed. So, if the user was accessing http://appstenv2.company.com/testurl, I would like to redirect to https://appstenv2.company.com for the basic authentication. but with the same authentication scheme, if the user accesses http://appstenv6.company.com/testurl, I would want the challenge redirect to go to https://appstenv6.company.com. I'm hoping it's possible to use some system variable like SERVER_NAME to do this.
Challenge Redirect: https://$SERVER_NAME
Does anyone know if that is available in OAM 10.1.4.3 or some other way to accomplish the same thing with a single authentication scheme?

No, there are not multiple policies - the host names for all aliases on that single webserver are together in a single host identifier. And I realize I can only have a single challenge redirect, I just want to use a variable to redirect to the host name that was accessed as opposed to a static name.

A prefix can be included in the EJB JNDI name dynamically?

In the Stateless annotation, we can specify the mappedName attribute to the EJB JNDI name bind.
Can we specify a prefix to the mappedName separately?
For example: We have this:
@Stateless(mappedName="myEJB")And don't want to do this:
@Stateless(mappedName="prefix/myEJB")We want to include the prefix in another place in the code dynamically.
Can we do that??

jtahlborn wrote:
eudesf wrote:
Hello! Thanks for reply!
As I can't configure programatically, there is any way to configure in an application descriptor, or in another place of the application server?
The idea is to publish two applications that use the same EJB classes, but in different JNDI namespaces, because we don't want to share the resources. Otherwise, it will result in JNDI name conflicts. The applications works in different contexts and we want to reuse the existing EJB definitions.
Any suggestion?yes you can do this. ejb 3.0 keeps the features from 2.1, namely all the xml based configuration (although it is now optional). and, the annotations are always overriden by the xml configuration. thus, you can create different deployments with different the same compiled class files. you just need to override the annotation configuration with xml configuration (via ejb-jar.xml or whatever).Yes, we can do that. I've tested here, and it works. But, can we do better?
The configuration via XML implies maintenance, and it's not good, because we have so many EJBs to maintain.
And there is another problem... The EJB classes are in JARs, and these JARs are shared across the applications.
Pretend that you have to maintain two versions of each EJB JAR. One with XML configured and other without. If we change one, the another must be changed too. How can it be productive?
I have seen some EJB implementations that are more flexible with JNDI naming.
See:
- [http://openejb.apache.org/jndi-names.html|http://openejb.apache.org/jndi-names.html]
- [http://fixunix.com/weblogic/221782-dynamic-jndi-name-weblogic-ejb-jar-xml.html|http://fixunix.com/weblogic/221782-dynamic-jndi-name-weblogic-ejb-jar-xml.html]
Does it have a better solution in Glassfish?

Why the hell can't i make the call?

i bought a monthly plan with 400 mins to call to hk. after i have finished my minutes, i bought another monthly plan, but i couldn't make the call !!! it keeps telling me not enough credits!!! what the hell is wrong with this ????

Subscriptions minutes are given per month, not per payment.
This means if you purchase 400minutes on the 13th then these minutes are available till next month 13th. You can't add another 400 minutes before 13th.
Your order went through and your minutes will become available from the 13th of December.
If you need more minutes right now then you can purchase a different subscription, for example 120minutes.
Andre
If answer was helpful please mark it with Kudos and if issue is resolved mark it with solution. This will help other users find this answer more easily. Thanks in advance!

Can Nokia 6233 say the Caller's Name?

Similar Messages

Maybe you are looking for