Can nokia e72 connect to PC via wifi and transfer ...

I've been messing around with the sync stuff in home media and other settings, and I can't seem to figure it out.  Does my e72 have the function to be able to connect to my pc or is this only able to be done via bluetooth?  It seems that the function is available but the manual is vague and I can't find anything online.
Any ideas?

Hello,
Today I just found the Home Media app on my phone, can't believe I didn't notice it earlier, after all, I've been toying with it for the past three days :-)
Quoting from the User Guide:
Nokia_E72_UG_en wrote:
You can share and synchronise media files in your mobile
device with other compatible UPnP and DLNA certified
devices using the home network
Looks like we need a UPnP/DLNA compatible device. In order to turn the PC into something like that, you need some specific software to offer this functionality. This is a good start:
http://en.wikipedia.org/wiki/Digital_Living_Network_Alliance and
http://en.wikipedia.org/wiki/UPnP_AV_media_server
I managed to install uShare on my Ubuntu Linux PC and got the phone to browse the files just fine, just didn't manage to get syncronization working yet :-). Phone is on wireless, my PC is not, so as long as they're on the same LAN you're good, no bluetooth or anything else needed (I got my WLAN bridged to my wired LAN).
If I get all of it working I'll post here.
Good luck!
Alex

Similar Messages

  • After ois 7 upgrade i can no longer connect my camera via wifi to upload photos to my iphone, nor ipad

    I have a Canon camera that has wifi.  Before the OIS 7 upgrade, I could upoad phots from my camera to either the iphone, or ipad wirelessly.  Since the upgrade, i cannot.  Anyone found a soluti on.  I have tried resetting the settings on the camera to original, renaming the camera name to remove the apostrophe. 

    Yes I tried this manyfold. But did not work.  Reading on, I took Tesserac's advice. Shut down router and computer.
    Start router after 15 minutes and wait another 10 minutes before starting the computer.
    Et voila.... everything is back in working order,
    Regards form Curacao, Dutch Caribean.
    Pete van Linden

  • I can't get connected to internet via wifi

    This happened once before and I did something in system preferences -> network, and got the connection.  I did not change anything since but It is not working now and I dont remember what I did to fix it last time. 

    I would recommend using a different DNS setting, the ISP the hospital uses may be causing problems with their DNS settings. Please follow:
    1. System preferences
    2. Network
    3. Click Advanced
    4. Click DNS tab
    5. Click + sign
    6. Add 208.67.222.222
    7. Click + sign
    8. Add 208.67.220.220
    9. Click OK.
    10. Exit System Preferences

  • MB Air cannot see TC 1T '09 while connected via WiFi and Ethernet.

    I have a TC 1T 2009 7.4.1 that I have set up successfully with MB Pro and MB White. However I cannot set it up with MB Air v.1 which is connected to TC via WiFi AND Ethernet cable. Internet is fine (Safari) but no TM - when I run APU 5.4.1 it cannot discover the TC it is connected to.
    I tried connecting after hard-reset (poke/power on), it would see the TM but then hang forever reading the configuration. So I set it up with MB Pro and MB White and both are now working fine with TC/TM. Then I tried MB Air and it failed.
    The TC is connected via ethernet to Sagem router (bridged mode) which supplies WAN and DHCP, it has its own WiFi as well.

    And by the way, Hi Everyone, how rude of me not to greet you in the post.
    Thanks for any help!

  • I have a problem in connecting to internet via WiFi.

    I have a problem in connecting to internet via WiFi. This week I received my new "iPhone 6 and 6 plus". Problem is the new phones doesn't connect to internet via my home WiFi  while I don't have any problem on my other devices. The phones connect to WiFi but most of Apps can't connect to internet.

    Hi vpouya,
    If you are having an issue with connecting to the Internet from your iPhones via Wi-Fi, I would suggest that you troubleshoot using the steps in this article - 
    iOS: Troubleshooting Wi-Fi networks and connections - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • I keep getting error message " server stopped responding" when trying to connect to internet via wifi

    My iphone works fine using cellar network, but will not connect to internet via wifi. Ive reset network setting with no diffrence.
    Any ideas?

    And you can turn the WiFi button on and off?
    If yes, then you next need to try to Restore your iPhone from your backup.

  • IPhone no longer connects to iTunes via Wifi

    On July 1,12 my iTunes did an automatic update.  After the computer restarting and I entered iTunes and the following messages appeared:
    Message 1: Must reinstall itunes to connect to ipod or mobile devices.
    Message 2: CD/DVD folder must be located in itunes folder in order to use with itunes
    I have 2 iphones (both 4s, bought at same time, both running iOS 5.1.1)and one will briefly connect to itunes via Wifi (I will identify this one as iphone1) but the other one will not (I will identify this one as iphone2).  I have a PC with Windows 7.
    When iphone1 is connected to itunes via wifi is disconnects randomly.  Under: Summary > Version, it has the message: Connect this iphone using a USB cable in order to update or restore its software.  When I have it connected with the USB cable, there are no problems. The settings selected under: Summary > Options > are: Open iTunes when this iphone is connected, Sync with this iphone over Wi-Fi,  & Manually manage music and videos.  The Setting under Backup > Back up to this computer (where it backs up to; I do not know)
    iphone2 does not connect via Wifi but used to.  It connects without issues with the USB. The Settings in iTunes > Summary are the same as iphone2 except that iphone2 is set as Backup > Back up to iCloud.
    My iphone2 is my primary device.  I use it exclusively; for music, taking photos, syncing photos to my Photo Stream folder on my PC, etc.  The iphone1 is my spouse's secondary phone, so its not used as often (ie: only has 4 songs downloaded, used to take the odd picture, has a mirror image of apps from iphone2).
    I searched Apple Support and tried the following solutions that didn't solve this problem:
    How to restart the Apple Mobile Device Service (AMDS) on Windows (support.apple.com/kb/TS1567) &
    Set the Apple Mobile Device Service Startup type to Automatic
    I have not done this: Remove and reinstall iTunes and AMDS. I did goto the: iTunes for Windows: Device Connectivity Tests > iOS > iPhone - iTunes Troubleshooting Assistantand into iTunes > Help > Run Diagnostics.  The results were: All tests passed. (My iphone2 was plugged in with USB. The iphone1 was connected via WiFi.)
    What do I do now?  Do I need to remove and reinstall iTunes? and if so will I lose all my itunes info (videos, music, apps, settings) or will it just show up after I install iTunes?

    Hi Mitch,
    It sounds like you have already done many of the steps, but I would like you to look at this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    and go over any that you may have missed.
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • My macbook pro cannot connect to internet via wifi

    I have a Macbook Pro 2010 OS X 10.8.3.  I cannot connect to internet via wifi (Air por).  My Macbook Pro does not recognize my network and when I select it from the list of network it asks for my network password.  when I type in my password a dialog box gives me timeout error.  Please could anyone help me.  I am using ethernet for my connection at the moment.  Do I need to reset my macbookpro?  if yes, what will happen to my applications and operating system (mountain lion)?
    Monireh

    When you use the Airport utility what happens?
    What is in the System Preferences control panel for Network settings?
    http://www.apple.com/support/airport - there is a forum just for Airport Community
    Airport Express FAQ
    http://support.apple.com/kb/HT1515
    Wi-Fi Setup Considerations
    Things to consider before you begin
    Start with a plan for the physical layout. Depending on whether you have an existing Wi-Fi network, or if you are using your AirPort Express as a standalone Wi-Fi device, there are several options available for you to choose from.
    When using Ethernet, Cat6 cable is recommended.
    The layout you choose should take into account environmental factors such as physical access, location, range, radio frequency interference, etc.
    You will need to consider what AirPort Utility settings to adopt.
    You will need to know whether you are using an AirPort Express (802.11b/g) or an AirPort Express (802.11a/b/g/n).
    If you will be using more than one Wi-Fi base station, it may be helpful to read the article Extending the range of your wireless network by adding additional Wi-Fi base stations.
    AirPort Discussions
    Discuss your AirPort Base Station, Time Capsule and Wi-Fi questions with fellow community members.
    More
    Direct you to the proper forum for MacBook :
    MacBook Series Forumshttps://discussions.apple.com/community/notebooks?view=discussions
    Mac OS X Forums
    https://discussions.apple.com/community/mac_os?view=discussions 
    http://www.apple.com/support/macbookpro

  • HT1178 i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    i am setting u a new time capsule. i already have a wifi setup in my office. now i want to use this time capsule just as a wireless backup machine. do i still need to attached a DSL cable, or it can connect to my existing wifi and start working ?

    You probably can, but this type of configuration is not recommended or supported by Apple.
    Two cautions if you want to try this:
    1)  The Time Capsule has to be configured to "Join" your existing wireless network in this type of setup...and to do that, you must know the exact type of wireless security that your network is using.
    2)  Backups are likely going to take twice as long. The wireless signal must travel from your computer to the wireless router and then from the wireless router back to the Time Capsule.  Two "hops"......even if the computer is located close to the Time Capsule.
    If you want to try this, we can tell you how....but with no guarantees on your results....since this is not officially supported.

  • Why can't I connect to my home WiFi network with my new iPad Mini?

    Why can't I connect to my home WiFi network with my new iPad Mini when I can connect to free WiFi networks at cafes and public areas?

    Try this:
    1. Turn router off for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

  • Why can't I connect to a new wifi?

    Why can't I connect to a new wifi? When I click on the wifi account it takes me to the IP Address page not the password page.

    Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

  • Can I bridge AEBS to AEBS via WiFi N?

    I've got a problem connecting some equipment located in a basement. I have a Slingbox, a Blu-ray player and an old G5 iMac that I use as a media center all located in my basement. I need all of them to be connected to the Internet.
    My Office, my Intel iMac and my AEBS are all located on the second floor of the house. The house does not have any hardwired Cat5 connections. Cable modem to AEBS to WiFi.
    Currently I am using an Airport Express to connect to the G5 iMac, and this works great. We are able to connect to the iTunes library on the G5 in order to watch Movies on 2 ATVs and 2 different MacBooks.
    The Slingbox and Blu-ray player are connected via an electrical system distribution hub which is now suddenly starting to act unreliably. I figure I could buy two more Airport Expresses to connect the Slingbox and Blu-ray player, but was wondering if I could instead bridge another AEBS to the basement then connect via the provided ethernet connections on the back of the 2nd AEBS to the Slingbox, Blu-ray and iMac.
    I have read that you have to bridge the AEBSs via an ethernet cable, but that's not possible in this case. Is it possible to bridge them via the WiFi N?

    Does anyone know what the settings page by page in Airport Utility (5.5.1) should be to make the above setup work?
    I received my Time Capsule today - the replacement of the old AEBS was incredibly simple.
    I have the AEBS connected to the TC via WiFI - and have a green light on both devices. However, when I connect the AEBS to my iMac via ethernet I get a message in System Preferences/Network that says "Ethernet has a self-assigned IP address and will not be able to connect to the Internet".
    I have search Apple Database looking for instructions on setting up WDS, but only get the same Article HT2044 Dated July 31, 2008 - which does not obviously reference the same screens, selections or wording of Airport Utility 5.5.1
    Any help would be greatly appreciated!

  • Can you do keynote or PPT presentations via wifi and AppleTV?

    Can you do keynote or PPT presentations via wifi and AppleTV?

    Not from your mac/PC, but keynote presentations from an iPad 2 with AirPlay are quite simply brilliant. Not only do you have full control of the keynote in your hands, but besides seeing the slides that everyone else is seeing, right in front of you as you look at your audience, you have your notes too.

  • HT1695 I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

    I am trying to connect to my uni wifi, and when i click on the wifi, it directs me to a log in page. However, the two boxes to enter the username and password do not appear. Can anyone help me with this???

    You didn't say what you have already tried, but if you haven't already done so, power-cycle your router (unplug it for 15 seconds then plug it back in), then on your phone go to Settings>General>Reset and tap Reset Network Settings, then try joining your wifi again.

  • I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, agree pressed but no further??

    I have iphone 4 os 7.04, tried updating to 7.1, but continously shows error that I dont have working internet connection, though I have one and tried via wifi and 3g same error comes. The update has been downloaded, the page shping license agreement comes. As soon as I press agree, it asks me to wait for verification and then this error that there is no working internet connection comes, even though I have one and it works fine

    Try these steps as needed:
    Reset phone: press both the home and power buttons, releasing when the Apple logo appears
    Settings > General > Reset > Reset Network Settings.  You will have to re-enter WiFi passwords
    Connect phone to iTunes on your computer and update using iTunes
    iOS: How to update your iPhone, iPad, or iPod touch

Maybe you are looking for

  • Keeping tracking color

    I was wondering if anyone knew a way to save tracked info when editing a paper in that color? basically I wanted to have a document open and save new information in the different color as i edited it without having to manually change it to the font e

  • Workflow not triggered when called within a Dynamic Trigger of HRMS

    Hello, Requeirment :Whenever any data is updated withing the People workbench of HRMS, a notification should be sent with the following message: Employee Number <Empno> has modified emailid from <old> to <new>. To achieve the same a dynamic trigger h

  • X11.app wont start

    I tried starting the X11.app but it wont start. It actually crashes Xquartz. Below is the crash log from console. I've tried unistalling X11 and reinstalling X11user and X11sdk but it did not change anything. Any help would be greatly appreciated. Co

  • My blackbeyy does not browse

    My black berry torch 2 does not connect with my bis, but it makes call and receive calls. If I put my sim in another fone, it would connect to d bis of d other fone. The only internet application that works is my web browser.. In short words its not

  • After downloading a movie from itunes i get the message MPAV Controller Error Domaine error 3 what can i do ?

    after downloading a movie from itunes i get the message MPAV Controller Error Domaine error 3 what can i do ?