Can Nokia Lumia 630 toggle between 2G and 3 G manu...

Is this easily done guys? regardless of what network I might be on.
Thanks

Yes this could vary by region and operator and if device is locked,but go to settings-mobile and sim-turn on data there then go to sim settings,you will see the screen below
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Similar Messages

Nokia Lumia 630/635 shell.

Can Nokia lumia 630/635 shell support lumia 638??????
Moderator's note: The subject was edited. A more appropriate title was provided.

deep0271 wrote:
Can Nokia lumia 630/635 shell support lumia 638??????
Moderator's note: The subject was edited. A more appropriate title was provided.
The measurements and dimensions of the aforementioned phones are basically the same, so I'd believe it should fit. Although I strongly advise to look for a Microsoft / Nokia Store or a physical mobile retail shop to confirm and to possibly test if it does fit.
Good luck

Over what frequency range can nokia lumia 820 receive sound?

Hello, over what frequency range can nokia lumia 820 receive sound?
And if I connect a microphone in the 3.5mm connection what is the badwidth then?
In addition I have to know what is the bandwidth of the speakerphone?

Hi Alon,
For this question, I would suggest you reading the instruction of your device.
Because this form is discussion windows phone development issues, so The
Windows Phone Answers forum is a better place for product issues:
http://answers.microsoft.com/en-us/winphone
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Nokia Lumia 630 phone connection with USB cable an...

Kindly be advised that I have been able to easily connect my Nokia E6 in the past to my Lenovo Thinkpad T530 running Windows 7 (64 bit) via Nokia Suite and Windows Explorer by both Bluetooth and the USB cable and was able to see the D and E drives (e.g. mass storage and phone memory) of such Nokia phones.
Since I connected my new Nokia Lumia 630 to the same notebook computer, the bluetooth phone appear under Bluetooth devices and music and sound can be relayed between the computer and the phone, however, no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection. During a USB Cable connection at least the documents and photos folders appear in Windows Explorer but nothing else on the D or E drives are displayed.
Even the Zune (the Nokia PC Suite replacement) does not want to even connect with the phone device from the notebook!
Kindly advise why I am unable to access the Nokia Lumia 630's full mass store and phone memory via BlueTooth or USB Cable from my Lenovo Thinkpad T530 running Windows 7 (64 bit) ?

Jonkie wrote:
Zune […] does not want to even connect with the phone device […]
Zune was targeted towards Windows Phone 7. It got replaced by the Windows Phone app for desktop – which does not give any more feature than you have already.
Jonkie wrote:
no files structures are being displayed under such phone connection in Windows Explorer during a Bluetooth connection.
Windows Phone 8.1 does not support the Bluetooth profile OBEX File Transfer (FTP) as Symbian did, yet. Because this is a feature request, there you go …
Jonkie wrote:
D or E drives are [not] displayed.
What files are missing, what do you expect exactly? Then, I look-up the corresponding feature request.

E72 - How to toggle between portrait and landscape...

Some games refuse to run by displaying "This game is not supported in landscape mode. Please turn your handset to portrait mode".
How can I toggle between landscape and portrait modes in Nokia E72?

You can't do that because of the screen orientation which is landscape only in case of E72, E71, E5.
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Sim 02 apn disappears in nokia lumia 630 dual sim

I have Nokia Lumia 630 Dual Sim. I purchased in Sept 2014.
Right Now I have two sim cards. Sim 01 : BSNL and Sim 02 : Tata Docomo (microsim)
I can access Sim 01 internet only. Whenever I want to use Sim 02.
I type APN address in APN Text box "TATA.DOCOMO.INTERNET" then add IP type in text box "IPv4"
and save. It disappears when I back to confirm in add Internet APN. This happens only with Sim 02.
I have tried so much time finaly i called to Nokia care. Executive told me to simple shut down process holding down volume minus and off button for 10 to 15 seconds and restart mobile. but all in vein.

Is this related? There is a software bug, until this is fixed, you can have a custom APN for one SIM only. Therefore, did you create a custom APN for both SIM? Do you really need that? BSNL and Tata DOCOMO are not offered as ‘profile’?

Error Code 80070490 in Nokia Lumia 630

Kod błędu 80070490 w Nokia Lumia 630 kod błędu pojawia się na probie instalowania aplikacji.

Hi
If you hard reset the phone does it fix the error?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Does nokia Lumia 630 support denim update

respected sir myself Amol I want to know that does Nokia Lumia 630 support denim update I am from India if not then when it will be available.
thank you.
best regards,
amol

Hello,
you can check here ([1]) which release is available for your device. For the Lumia 630 in India that is the Cyan release.
[2] reads "For all other Lumia Windows Phone 8 smartphones, the update will start rolling out during Q4 2014, following partner testing and approvals", so I think
it is only a matter of time when the update is deployed to the Lumia 630 in India.
[1]
http://www.microsoft.com/en/mobile/support/software-update/wp8-software-update/wp8-availability-in-asia-pacific/
[2]
http://lumiaconversations.microsoft.com/2014/09/04/lumia-denim-update/
Regards,
Henning Dieterichs
Developer-Hotline for MSDN Online Germany
Disclaimer:
Please take into consideration, that further inquiries cannot or will be answered with delay.
For further information please contact us per telephone through the MSDN-Entwickler-Hotline:
http://www.msdn-online.de/Hotline
For this post by the MSDN-Entwickler-Hotline the following terms and conditions
apply: Trademarks,
Privacy
as well as the separate
terms of use for the MSDN-Entwickler-Hotline .

Nokia Lumia 630 - Dual SIM / One SIM network diffe...

I was just about to buy a Nokia Lumia 630 Dual SIM here in Thailand , my mobile SIM card only works of the 3G band - 850Hhz , I was told by the sales person that the Nokia Lumia 630 Dual SIM only has the 3g frequencys of
HSDPA 900 / 2100
but the One SIM version has the 3g frequencys of WCDMA/HSDPA Quad Band 850/900/1900/2100 MHz
I know that mobile phones can be different 3 g frequencies in different countries , but I wondered what you guys thought .
Solved!
Go to Solution.

I saw the details here
http://www.siamphone.com/spec/en/nokia/lumia_630.htm
and here ( in Thai , but easy to read )
http://www.jaymart.co.th/ViewPro.asp?8328
Attachments:
6303G.jpg ‏162 KB
JM3G.jpg ‏140 KB

How do I print from my Nokia Lumia 630 phone

How do I print from my Nokia Lumia 630 phone

Hello, and Welcome to the HP Support Community!
To get good answers, we need good questions!
1. What kind of printer are you asking about? (Hopefully it's made by HP).
2. How is the printer connected to the phone? Wireless network? Wireless direct?
3. Have you tried asking in a Nokia forum?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Ios8 toggle between 2G and 3G

I come form India, where the 3G coverage is not that good. So to save on battery I would always keep my phone on 2G and only use 3G when for example I wanted to see a video on youtube.
But looks like the toggle between 2G and 3G has been removed in IOS8. This is a deal breaker for users like me.
I travel a lot and charging a battery often is not really a viable option .
Is there a way to revert back to IOS 7 again. I get a feeling, apple does not seem to care about users from developing countries, this is sheer arrogance to go ahead and remove the toggle between 2G and 3G.
If apple does not include this feature soon, I may be left with no option but to migrate to Android, where you can toggle between 2G and 3G easily.

dulan1086 wrote:
But doesnt all the other phones (Nokia, Samsung, HTC etc) have it as a device update? It would be easier for the users. We pay for the phone not the carriers
You pay the carriers to use their network. They set the terms for that. If an iPhone does not meet your needs sell it and buy a phone that does.

Getting remote context to "s1" is toggling between "s1" and "s2"

I'm on WLS8.1SP4.
I have an app that runs on my admin server, which communicates to a custom mbean hosted on my cluster (managed servers "s1" and "s2"). Some of the operations in the app send the same message to both "s1" and "s2", and some of the operations target either "s1" or "s2".
Each time the app needs to connect to the mbean on a specific server, it gets the remote context to the server, using the Environment object, setting the provider URL to the URL for that server (I've watched this in the debugger). From that remote context, it does the JNDI lookup, gets the RemoteMBeanServer object, builds the ObjectName for the attribute (most of the calls are just attribute get/set calls), and then calls "getAttribute()" on the remoteMBeanServer. This all seems ok.
Here's where something goes wrong. What I see happening is very odd. When the application first starts, it makes a set of calls specifically to "s1" and "s2". This first set of calls appears to be ok. However, when I make it go through the same set of calls again, all the calls that specifically build a URL for "s1" actually end up calling "s2". I can verify this by monitoring the debug output in the "get" methods in the mbean code. When I make it go through the calls again, it does them correctly. It very consistently toggles back and forth between "s1" calling "s1" and "s1" calling "s2".
I'm at a loss to understand why this is happening.
My admin server (where the main app is running) is Win2k Server, and the managed servers are Solaris 8.
I've managed to repeat this on a different domain, but hosted on the same distribution and set of servers.
I filed a ticket for this, and the engineer is working on building a test case to see if they can repeat this.
I tried one experiment they wanted me to try, by adding the admin server to the cluster, effectively making the main app communicate to "s1", "s2", and "adminServer". What I saw happen with this configuration is that calls to "adminServer" always went to "adminServer", and the same with "s2". The calls to "s1" continued to toggle between "s1" and "s2".

Minor clarification: I realized that the domain this is on is actually running 8.1SP2 (not SP4).

Toggle between Rosetta and Universal

I just installed Flip4mac wmv, in the post is suggested that I select Rosetta in the Get info panel that all went well and I was able to watch the wmv file, no problem.
My question is how do I get out of or toggle out of Rosetta back into Universal. I have looked on different sites, I must have missed something, I can't seem to figue out how to do this.
Please excuse my lack on knowledge, this is my second week on a Mac.
Many thanks.

I went into Quicktime and was able to select Get Info to change to Rosetta, yet there is no option to go back to universal. What I m reading on the posts that suggested that you can toggle between Rosetta and Universal, or am I misreading that.?
My Mac Pro is Intel chipped.

Agent Desktop's agent state toggles between "ready" and "reserved

Hello and thanks for all of your past help. I have a user whos'e Agent Desktop's agent state toggles between "ready" and "reserved when no calls are coming in to he IP Phone 7941 or 7961. Can anyone help?
Thanks, Chet

Is the agent's phone actually ringing at all? If not I suspect the IP IVR ports are unable to call the agent. UCCX tries to send a call to the agent so it sends the reserve event to the agent and then tries to send the call to the agent but is failing so it cancels the event flicking the agent back into ready. Perhaps check to make sure that the ports have an appropriate calling search space to call the agent extension. Maybe configure a phone the same as the IVR port and check to see if you can call the agent extension?
Cheers,
Nathan

PLMD_AUDIT - Toggle between Display and Change - Important!!

Hello all,
I've a problem when I work on PLMD_AUDIT.
Pre-requisite for replicating the issue.
1> Change the settings in PLMD_AUDIT (a face like icon) to Display mode
When I run PLMD_AUDIT for an Audit with Action, it displays me the "Grouping" field and the "Involved Persons" tab values correctly.
But when I toggle from Display to Change, the value in "Grouping" and the "Involved Persons" tab vanishes.
Can you please check in your system and let me know if you also face this issue?
Thank you in advance,
Vaishnavi

Hello Keerthi,
Thanks for your reply.
Please follow the below mentioned steps.
1) Change your time zone to a different time zone other than the created time zone of the action.
say if action has been created in London time zone, change system zone to some other than London.
2) Change the Settings in PLMD_AUDIT tcode (face like icon) to Display
3) Open any audit WITH ACTION.
4) When you double click on Action inside the audit, the action will be opened in Display mode.
5) Now toggle between Display and Change.
6) Kindly check if the values in the "Grouping field" and BUPA roles in "Involved Persons" tab are present now after toggling?
Please let me know at the earliest.
Your assistance is highly appreciated in this regard.
Thanks in advance,
Vaishnavi

Can Nokia Lumia 630 toggle between 2G and 3 G manu...

Similar Messages

Maybe you are looking for