Can not access a component already placed in Ultiboard, only way to highlight is in spreadsheet view/parts. It is not locked.

Can not access a component already placed in Ultiboard, only way to highlight is in spreadsheet view/parts. It is not locked.
Anyone encountered anything similar?

How is your  selection filter set up?... make sure that you have 'enable selecting parts' checked. In that way you can select the component. Otherwise you can go to Edit >> Selection Filter >> Enable selecting parts.
If that is not the problem, then please attach your project file here so we can check it out.
Nestor
National Instruments

Similar Messages

  • Satellite M30: I can not lock in my wirelesss network

    Hello folks,
    I have a Satellite M30 and since yesterday I can not lock in my wirelesss network. Every now and then I can see the network, but I can not make a connection. Additional the sound and mousepad is stuttering when the wireless is turned on, both is fine when wireless is switched of.
    I recovered the system, but the problem is still there.
    Any help for me out there?
    Stephan

    Hi Stephan
    It is always interesting when someone write since yesterday. Believe me who knows what did you done and now there is some negative influence on to WLAN. In this case I am pretty sure that there is some mistake caused by you. Check WLAN settings on the unit and on your router too.
    I really dont know what is wrong with sound and mouse. Does this issue occur if the unit is connected on to AC adapter or just under battery power supply?

  • Have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .

    have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .

    Apple world-wide support numbers are found at: http://support.apple.com/kb/HE57
    If this is regarding your information line that says a stolen iPhone, Apple can do nothing to help you.  You must track the iPhone yourself using iCloud and must have turned on Settings > iCloud > Find My Phone before it was stolen.  If that was not done, there is no way to track the iPhone.
    Report the theft to the police and the cell service provider and ask if they can blacklist the iPhone so it cannot be used.  Change all passwords associated with acconts on the iPhone.

  • When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer.  It then attempts to install the printer software, which is already installed.  The only way to fix it is to unplug the printer.  Any thoughts?

    When I plug in my IPOD Nano into a USB port, the computer recognizes it as a printer.  It then attempts to install the printer software, which is already installed.  The only way to fix it is to unplug the printer.  Any thoughts?

    Turn the printer off.

  • Can't access PublishingMessageSource component in dyn/admin of ATG10.2 BCC

    Hi,
    I want to use PublishingMessageSource to revert my stuck project in BCC, but When I access /atg/epub/messaging/PublishingMessageSource/ in 10.2 BCC, It throw the following exception.
    It seems cased by permission issue, But I did not hear that the account of dynamo/admin need role to access it before. I found out CRS has the same issue, Is it a new feature in 10.2?
    Thanks.
    javax.ejb.EJBException: QUERY_EXCEPTION_MESSAGE: RQL query: status = ?0 ORDER BY ?3 ASC IGNORECASE RANGE ?1+?2, Args: ?0=Edit ?1=0 ?2=-1 ?3=displayName
         atg.repository.tojava.runtime.RJSupport.executeRqlStatement(RJSupport.java:1045)
         atg.epub.project._ProcessHome_ReposImpl.findProcessesByStatusSort(_ProcessHome_ReposImpl.java:129)
         atg.epub.messaging.PublishingMessageSource$1AdminServlet.printAdmin(PublishingMessageSource.java:250)
         atg.nucleus.ServiceAdminServlet.printService(ServiceAdminServlet.java:343)
         atg.nucleus.ServiceAdminServlet.service(ServiceAdminServlet.java:272)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         atg.nucleus.Nucleus.service(Nucleus.java:2992)
         atg.nucleus.Nucleus.service(Nucleus.java:2892)
         atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.ServletPathPipelineServlet.service(ServletPathPipelineServlet.java:208)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.security.ExpiredPasswordAdminServlet.service(ExpiredPasswordAdminServlet.java:312)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.BasicAuthenticationPipelineServlet.service(BasicAuthenticationPipelineServlet.java:555)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:491)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:249)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.SecurityServlet.service(SecurityServlet.java:196)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1252)
         atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:930)
         atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:272)
         atg.nucleus.servlet.NucleusProxyServlet.service(NucleusProxyServlet.java:237)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
    root cause
    CONTAINER:atg.repository.RepositorySecurityException; SOURCE:atg.security.PermissionDeniedException: You do not have read access to the process item descriptor.
         atg.adapter.secure.GenericSecuredRepository.checkAccess(GenericSecuredRepository.java:451)
         atg.adapter.secure.GenericSecuredRepositoryView.executeQuery(GenericSecuredRepositoryView.java:401)
         atg.repository.rql.RqlStatement.executeQuery(RqlStatement.java:227)
         atg.repository.tojava.runtime.RJSupport.executeRqlStatement(RJSupport.java:1031)
         atg.epub.project._ProcessHome_ReposImpl.findProcessesByStatusSort(_ProcessHome_ReposImpl.java:129)
         atg.epub.messaging.PublishingMessageSource$1AdminServlet.printAdmin(PublishingMessageSource.java:250)
         atg.nucleus.ServiceAdminServlet.printService(ServiceAdminServlet.java:343)
         atg.nucleus.ServiceAdminServlet.service(ServiceAdminServlet.java:272)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         atg.nucleus.Nucleus.service(Nucleus.java:2992)
         atg.nucleus.Nucleus.service(Nucleus.java:2892)
         atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.ServletPathPipelineServlet.service(ServletPathPipelineServlet.java:208)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.security.ExpiredPasswordAdminServlet.service(ExpiredPasswordAdminServlet.java:312)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.BasicAuthenticationPipelineServlet.service(BasicAuthenticationPipelineServlet.java:555)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:491)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:249)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.SecurityServlet.service(SecurityServlet.java:196)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1252)
         atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:930)
         atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:272)
         atg.nucleus.servlet.NucleusProxyServlet.service(NucleusProxyServlet.java:237)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
    root cause
    atg.security.PermissionDeniedException: You do not have read access to the process item descriptor.
         atg.adapter.secure.GenericSecuredRepository.checkAccess(GenericSecuredRepository.java:451)
         atg.adapter.secure.GenericSecuredRepositoryView.executeQuery(GenericSecuredRepositoryView.java:401)
         atg.repository.rql.RqlStatement.executeQuery(RqlStatement.java:227)
         atg.repository.tojava.runtime.RJSupport.executeRqlStatement(RJSupport.java:1031)
         atg.epub.project._ProcessHome_ReposImpl.findProcessesByStatusSort(_ProcessHome_ReposImpl.java:129)
         atg.epub.messaging.PublishingMessageSource$1AdminServlet.printAdmin(PublishingMessageSource.java:250)
         atg.nucleus.ServiceAdminServlet.printService(ServiceAdminServlet.java:343)
         atg.nucleus.ServiceAdminServlet.service(ServiceAdminServlet.java:272)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         atg.nucleus.Nucleus.service(Nucleus.java:2992)
         atg.nucleus.Nucleus.service(Nucleus.java:2892)
         atg.servlet.pipeline.DispatcherPipelineServletImpl.service(DispatcherPipelineServletImpl.java:253)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.ServletPathPipelineServlet.service(ServletPathPipelineServlet.java:208)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.security.ExpiredPasswordAdminServlet.service(ExpiredPasswordAdminServlet.java:312)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.BasicAuthenticationPipelineServlet.service(BasicAuthenticationPipelineServlet.java:555)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.DynamoPipelineServlet.service(DynamoPipelineServlet.java:491)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.dtm.TransactionPipelineServlet.service(TransactionPipelineServlet.java:249)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.SecurityServlet.service(SecurityServlet.java:196)
         atg.servlet.pipeline.PipelineableServletImpl.passRequest(PipelineableServletImpl.java:157)
         atg.servlet.pipeline.HeadPipelineServlet.passRequest(HeadPipelineServlet.java:1252)
         atg.servlet.pipeline.HeadPipelineServlet.service(HeadPipelineServlet.java:930)
         atg.servlet.pipeline.PipelineableServletImpl.service(PipelineableServletImpl.java:272)
         atg.nucleus.servlet.NucleusProxyServlet.service(NucleusProxyServlet.java:237)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:717)
         org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
    帖子经 959284编辑过

    Hi,
    Yeah, I think my db account has the write / read access. That component works fine in ATG10.0.3 and ATG10.1.2, After I upgraded ATG to ATG10.2 and connect the same db, it is faild. this issue also occur in ATG10.2 CRS of my colleague computer.
    Thanks.

  • Can't access ANY HTTPS sites, and problem affects only one user acct !

    My new iMac (arrived yesterday) is driving me nuts, getting me sick. Countless problems ... def. not the experience I was hoping for ... (I'm not a new mac user, own a macbook for 3 years now).
    The last one is that my account, for some unknown reason and all of a sudden (was perfect before), stopped working with ANY HTTPS connection ... banks, whatever ... anything that involves a secure protocol is out. I can't even login to my iTunes store. The message is that it can't estabilish a secure connection to the server. (Oh, the iTunes reports unknown error, wich took me 2 hours to find out that it wasn't iTunes fault, but the whole system was not working with HTTPS).
    I already tried reparing the disk permission, verifying the disk (no errors found), AND reparing the keychain using the keychain aid. Oh, I also reseted Safari ...
    The weirdest part of it all is that another account I had set up on the iMac works just fine. JUST FINE. And my main account is hopeless.
    Does ANYONE have any clue on this ?
    (btw my new iMac just screwed my iPhone on the first sync ... it was supposed to go smooth since it was set up using a time machine backup from the macbook .. but no, it erased half of my apps in the iphone, including my task managing apps with LOTS of scheduled to dos ... this is ridiculous).
    Message was edited by: FelipeRaul

    i have the same problem on an imac for a non-admin user. admin user is working fine. have installed 10.5.5 yesterday without any change. all patches applied. have also removed user and system keychain, because this was mentioned in a forum, did not help either.
    please help

  • Have a problem I can not lock in name and password on a repeat and i have to log in eachtime

    When I use bookmark to bring up a sight I have to loge in each time

    "Remember Me" for automatic website login is usually saved in a cookie for each website.
    Try clearing your Cookies for the affected websites. <br />
    Tools > Options -> Privacy - Cookies = Show Cookies ''button'' <br />
    Enter the domain in the Search bar at the top and all the Cookies for that URL will appear. Unless you can figure out which Cookie is for "remember me", you'll need to delete them all.
    Hold the {Ctrl} key while you click on each Cookie in the small window. When that list is all highlighted, click the Remove Cookie ''button'' in the lower left.
    When you are done click Close.
    Or you can right-click the page, choose View Page Info > Security > "View Cookies" and delete them there, for each different website as you get to it.
    If that problem persists, you might need to delete the '''cookies.sqlite''' file in your Profile folder.
    [http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile]
    ''You might need to unhide your "Hidden files and folders" thru Folder Options in the Windows Control Panel''

  • I was given an older ipod as a gift and want to load the songs into my computer, but it says that I can not access the sync feature.  I registered for an Apple ID and when I tried it won't let me register.

    When I was given the iPod it had a GREAT load of songs already on it. (That was part of the whole "gift" thing.)  I want to sync it and create playlists in my own library and copy the songs to my computer's library too.  I applied for an Apple ID, and find that this is so old that eventhough it was NEVER registered it is listed under a weird username and won't let me register as the new owner to access the music and sync.  What do I do?  It is an older version (I'm assuming) with 80G and only 25 have been used.  I can't access the music already loaded and don't want to lose the mp3 files I have in my existing library now too. 
    Any help is greatly appreciated.

    Not sure if this helps:-
    The music files, were they bought from your iTunes account or did someone gift them to you after buying from the iTunes account? If they are yours you can download them again if you clear or de-authorise the ipod, it has to be done by whoever gave you the ipod to do this (the registered  owner). If they were bought for you on another itunes account I don't think Apple let you use them as they are copyrighted and they don't belong to you, they belong to the person who bought them. If the music files where ripped from music cd's then click and drag them to a new folder on your desktop and have the person who gave you the ipod to de-authorise and unregister it. Then you re register it and put your files back from your desktop folder in your iTunes folder and synch. Hopefully that would work.  Any files which you did not buy, I would not know how get around this, best bet is to take it to you nearest Apple  Store and explain that they were gifted to you and ask how you can use them.  The best way to gift music files is to buy the gift tokens and give these. Hope above helps.

  • Can't Access Router Settings via 192.168.2.1

    I have recently changed modem/routers as my connection speed was increased recently and the old modem wasn't up to the task... The previous modem/router was preconfigured and I did nothing to it, however the new one requires settings be fixed by accessing it via a browser at 192.168.2.1
    When the technician came to check my line and set up the new modem, we encountered a strange situation. Despite being connected by Ethernet cable, my machine could not access the IP address reserved for the router.
    The reply is: "Safari can’t connect to the server.
    Safari can’t open the page “http://192.168.2.1/” because Safari can’t connect to the server “192.168.2.1”."
    We tried Firefox and the same happened.
    I have deactivated my firewall, rebooted, changed cables, restarted the router, got Safari to pretend to be Explorer, got the neighbor's dog to bark at it, everything except make a blood pact with the devil, and the two browsers on my machine think that 192.168.2.1 is an external address- which it isn't, and of course fails to connect.
    The technician used his laptop to configure the thing, so I can access the internet (obviously) but I must find out why I can't access the router/modem's settings, if only to find some logical reason for this illogical behavior.
    I've tried looking this issue up, and I get lots of bad wiring, wireless connection, windows proprietary shenanigans, but none that explain my situation.
    I'd appreciate it if someone could help me make sense of this.
    My setup:
    Computer Model Name: Power Mac G4 (AGP graphics)
    Model Identifier: PowerMac3,1
    Processor Name: PowerPC G4 (3.3)
    Processor Speed: 1.35 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 256 KB
    L3 Cache (per CPU): 2 MB
    Memory: 832 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.2.8f1
    Sales Order Number: M7827LL/A
    Router: "2-Wire Gateway"

    Your advice did the job quite nicely and it seems this is the "natural way of things," but I was totally unaware of it since my previous modems were preconfigured and I never had to muck about with subnets and such things.
    What irks me is that this is basic, bare bones information that the Tech support people should have given me right off the bat. Why do they assume I have all the right numbers input into the Ethernet or PPPoE settings? They seemed totally perplexed that I couldn't connect, and frankly so was I- since my old Mac, as decrepit as it is, is still able to kick it with the modern way of things better than most computers I work with.
    If they had asked me if I had set the right IP's in the right slots, it could have been fixed in 2 minutes.
    Thank you very much for solving my problem, it saves me a lot of stress and confusion.

  • Accessing a component property

    How can a access a component property defined in the portal.xml file
    simulair to this
    <property name="plainDescription" value="Number of messages"/>
    I use a JSPDynPage.
    what I realy want is this.
          <env-entry>
              <env-entry-name>CONFIGURATION_FILE</env-entry-name>
              <env-entry-value><![CDATA[/configuration.properties]]></env-entry-value>
              <env-entry-type>java.lang.String</env-entry-type>
          </env-entry>

    see accessing a property

  • SSM-20 Can not upgrade software on the sensor

    Hi,
    I am trying to upgrade a sensor on IPS-SSM-20 and have "errInUse-An Upgrade is already in progroess" error.
    Can I do anything to fix that or my only way out is to reboot a module ?
    P.S. Two modules are  instaled on ASA-5520 - HA pair with multiple context.
    Thanks,
    Vlad

    Hello,
    I don't have option "debug module". Only debug option is to " debug module-boot"
    This is SSM-20 on ASA 5520.
    I forgot to mention that whole problem started when I acidentaly tried to upgrade sensor on a diferent module with a sign. version that already exist on the sensor. Erros was like"can not upgrade because version already exist on the sensor"
    After that I was not able to "kill" that process.
    Thanks,
    Vladimir

  • I can't access the disk on my time capsule

    I have a mocbook pro and a 2tb time capsule that was bought abut a month and a half ago, it's fully updated and so is my macbook but I can't access the hard disk. Is there a way in which I can access it without having to completely like reformat it?

    Not sure what you mean by access the hard disk.
    Are you asking about Time Machine backups from your Mac to the Time Capsule?
    If yes, click the Time Machine clock icon on the dock and wait a few minutes for the Time Machine "Star Wars" interface to fully load.
    Use the scale at the right of the window to select the date of a recent backup that you want to see
    Then, use the Finder like interface to navigate and find the file(s) that you want to see
    Click Restore at the lower right if you want to Restore the file to the present, otherwise click Cancel to close Time Machine and return to the present time.
    Is there a way in which I can access it without having to completely like reformat it?
    Reformatting the Time Capsule will erase alll fo the data on the drive and wipe it clean.

  • Changed RDP port to bypass University Network restriction on 3389, now can't access server at all.

    I'm new to Windows Server and I recently changed the RDP port from 3389 to 3390, due to University restrictions on Port 3389 and now I can't access the server at all via RDP, the port is not blocked at my end and the server is definitely up as I can still
    access my File server. 
    Is there any way I can fix this blunder, it's a dedicated server so I do not have access to the actual hardware, only via RDP.  Do I have to reinstall? I do still have access to RescueMode SSH. 
    Thanks!

    No, you'll simply need to logon to console and undo the regedit.
    http://support.microsoft.com/kb/306759
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • Can't access previously purchased TV shows from iTunes

    I have purchased several tv series in itunes and can't access SD version to download.  It only gives me option of downloading HD version which would mean I need to repurchase. 
    This issue is a function of itunes not downloading current week show.  I have to do manually each time.  I am logged into account and have most current version of Itunes etc.

    I'm having the same problem.  I purchased a SD season pass for a show and when I tried to download the newest episode I couldn't access the SD version.  When I click on the SD button nothing happens.  The only option it gives me is to download the HD version which means I would have to repurchase the episode.  I haven't had any response from Itunes support.  It hasn't been a problem in previous weeks.

  • After installation of Solaris 10  - CDE can not start

    I have installed Solaris 10 on Sparc Machine but the CDE doesn't start .
    I received the message :
    Suspendind Desktop Login...
    If currently logged out, press [enter] for a console login prompt.
    desktop Login will resume shortly after you exit console session.
    In the file /var/dt/Xerrors I have :
    fbconsole: ioctl SRIOCSREDIR: Device busy
    ioctl(MSIOSRESOLUTION): Invalid argument
    ddxSUNWmouse: couldn't set absolute mouse scaling resolution on /dev/mouse
    Tue Sep 12 11:54:15 2006
    error (pid 2490): Can not lock pid file /var/dt/Xpid, another Dtlogin is running (pid 873)
    I set the resolution of monitor for one supported :
    fbconfig -res 1280x1024x60
    But always I obtain the same thing,
    Can someone help me ?
    May thanks in advance,
    Luz
    Message was edited by:
    166248
    Message was edited by:
    166248
    Message was edited by:
    166248

    Perhaps your hardware / graphics adapter is not supported by Solaris 10.
    Take a look at the Solaris Hardware Compatibility List:
    http://www.sun.com/bigadmin/hcl/
    Now, no need to download any bootable ISO image. Just run this Device Detect tool:
    http://www.sun.com/bigadmin/hcl/hcts/device_detect.jsp

Maybe you are looking for