Can not access existing iWeb 3.1.1 on MBP

I created a web page using iWeb on MacPro (repeat MacPro) and it is now in storage. Sad, huh?
So I start using a MacBook Pro, iWeb 3.1.1 (latest version) and cannot access old webpage.
I read info on using different computers and different versions of iWeb.
Am I just stuck and unable to update my old webpage?
This is the old page and I can not access or update it. Can you give workaround or help, please?
Message was edited by: Host

Well, if you don't have the domain.sites file for your old website and did not save it from your other Mac before using the new one, then unfortunately, there are no workarounds.
You will have to re-build your site from scratch - iWeb has no import facility so cannot open published pages.
This question is asked almost daily on this forum, so do a search and you will find the answers - which is re-build from scratch if you can't access the old domain file.

Similar Messages

  • I can not access existing library folder when editing a previously saved book, please help

    Hi
    I am a 3rd year University student, brand new to lightroom and am creating (trying to) create 3 books for my final university assignment.
    I have created and saved "RABBET FINAL", and then carried on with the next 2 books, I now would like to go back and add more images to "RABBET FINAL", but when i select the the library folder I used previously called "All that i have", it automatically opens a new unsaved book. I then try to click on my saved book "RABBET FINAL", and it changes a library folder to a folder which only the images which are already in "RABBET FINAL"
    When I hover the cursor over the library folder at the bottom, it says "ALL that i have + unsaved book. Is this the issue?
    The BOOK also has a "+" next to it, is this causing it not to allow me to select from a different library?
    I hope this makes sense.
    [email protected]

    A saved book behaves like an ordinary collection.
    In the book module click on RABBET FINAL in the left hand panel. It will have a double page book icon if it’s a saved book. Now right click on that saved book and choose Set As target Collection. A plus sign will indicate it is the target.
    Now return to the Library and the folder with the images you wish to add. Use shift-click to select (highlight) the images you want or Ctrl+Click for individual non-consecutive images. With all of them selected press the B key and you should see confirmation that they have been added to RABBET FINAL.
    Return to the book module and click on RABBET FINAL and you should see your extra images in the film strip. Click on add page and drag each image from the film strip up on to the new page. Be careful to click in the center of each filmstrip image and not one of the thumbnail icons.

  • Can not access sample & admin tools after configuring Oracle8.1.7

    Hi all,
    I am using WLS6.1(sp2) and WLPortal4.0(sp1).
    I changed the default database(i.e. Cloudscape) to Oracle by following the doc
    http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
    But, after setting up the Oracle8.1.7, when i try to access the sample stock portal
    from the homepage, i am getting the following exception
    PortalPersistenceManager: portal 'portal/stockportal' not found
    <Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP> <[WebAppServletContext(1467076,stockportal,/stockportal)]
    Servlet failed with S
    ervletException
    javax.servlet.ServletException: Received a null Portal object from the PortalManager.
    at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalRequest(PortalWebflowServlet.java:194)
    at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
    at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    even i can not access the admin tools.....i get the follwing error when i try
    to access the portalTools/index.jsp
    <Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could not resolve
    a destination given: appname [tools], namespace
    [admin_main], origin [begin], event [defaultEvent] with request id [3121877];
    Attempting to load Configuration-error-page.>
    <Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsing uri /portalTools/application,
    path null, query string n
    amespace=admin_main - Webflow XML does not exist, is not loaded properly, or you
    do not have a configuration-error-page defin
    ed.
    Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
    node was not found in the webfl
    ow xml file. for webapp [tools], namespace [admin_main]. While trying to display
    CONFIGURATION ERROR: [Exception[com.bea.p13n
    .appflow.exception.ConfigurationException: Bad Namespace - namespace [admin_main]
    is not available for webflow execution. Mak
    e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
    at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurationError(WebflowExecutorImpl.java:786)
    at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:484)
    at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:419)
    at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:132)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
    at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    Am i missing any step here???
    can anybody help me????
    thanks
    Vijay

    oops...i missed step5.
    it is working now after doing the sync.
    thanks
    Vijay
    "Daniel Selman" <[email protected]> wrote:
    Did you sync the applications and load the sample data?
    Sincerely,
    Daniel Selman
    "vijay bujula" <[email protected]> wrote in message
    news:[email protected]...
    Hi all,
    I am using WLS6.1(sp2) and WLPortal4.0(sp1).
    I changed the default database(i.e. Cloudscape) to Oracle by followingthe
    doc
    http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
    But, after setting up the Oracle8.1.7, when i try to access the samplestock portal
    from the homepage, i am getting the following exception
    PortalPersistenceManager: portal 'portal/stockportal' not found
    <Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP><[WebAppServletContext(1467076,stockportal,/stockportal)]
    Servlet failed with S
    ervletException
    javax.servlet.ServletException: Received a null Portal object fromthe
    PortalManager.
    atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalReq
    uest(PortalWebflowServlet.java:194)
    atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWe
    bflowServlet.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
    l.java:241)
    atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2495)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    even i can not access the admin tools.....i get the follwing errorwhen i
    try
    to access the portalTools/index.jsp
    <Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could notresolve
    a destination given: appname [tools], namespace
    [admin_main], origin [begin], event [defaultEvent] with request id[3121877];
    Attempting to load Configuration-error-page.>
    <Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsinguri
    /portalTools/application,
    path null, query string n
    amespace=admin_main - Webflow XML does not exist, is not loaded properly,or you
    do not have a configuration-error-page defin
    ed.
    Exception[com.bea.p13n.appflow.exception.ConfigurationException: The
    configuration-error-page>> node was not found in the webfl>> ow xml file. for webapp [tools, namespace [admin_main]. While tryingto
    display
    CONFIGURATION ERROR: [Exception[com.bea.p13n
    appflow.exception.ConfigurationException: Bad Namespace - namespace[admin_main]
    is not available for webflow execution. Mak
    e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
    atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurati
    onError(WebflowExecutorImpl.java:786)
    atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
    est(WebflowExecutorImpl.java:484)
    atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
    est(WebflowExecutorImpl.java:419)
    atcom.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowS
    ervlet.java:132)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
    l.java:241)
    atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2495)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    Am i missing any step here???
    can anybody help me????
    thanks
    Vijay

  • I recently upgraded my Mackbook Pro ma operating system from OSX lion to Maverick, but in the process I can not access my iphoto 9.1.5. How do I access it?

    I recently upgraded my Mackbook Pro ma operating system from OSX lion to Maverick, but in the process I can not access my iphoto 9.1.5. How do I access it?

    Download the Mavericks version from the App Store.
    The iWork apps are free with a new iOS device since 1 SEP 2013. They are free with a new Mac since 1 OCT 2013. They are also free with the upgrade to OS X Mavericks 10.9 if you had the previous version installed when you upgraded.
    iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform.

  • On my iPhone 4s settings I can not access iCloud

    on my iPhone 4s settings I can not access iCloud (and not Face Time settings either). All the time I get an error message saying I have not acceptet the new iCloud "roules" (text about use from Apple) and I get two option; show ("vis" in Norwegian) or don't show. If I press show/"vis" the settings app will start at once but I can still not accsess the iCloud settings to accept whatever text needs to be accepted and I am just as far as I was stating out. Suggestions?
    As long as this exists my phone will not make a copy/security uppload to iCloud.

    If you are not able to accept the iCloud terms and conditions, try one of the solutions mentioned in this discussion: https://discussions.apple.com/thread/5321627?start=0&tstart=0.
    In the meantime, you can always manually back up to your computer using iTunes by connecting  your phone to your computer, opening iTunes, clicking on the name of your phone in iTunes, then going to the Summary tab of your iTunes sync settings and clicking Back Up Now.

  • When I plug in my Ipod touch to my computer a warning appears "The program cant start because MSVCR80.dll is missing."  I can not access my Itunes library.  Also, an "error 7 Windows error 126" appears as well.  Any ideas?

    When I plug in my Ipod Touch to my computer I can not access my Itunes library.  The following message appears "The program cant start because MSVCR80.dll is missing."  Also, another message appears as well - "Error 7  Windows error 126" as well as APSDaemon.exe.
    I have NO IDEA what the heck to do.
    Any ideas?
    Thanks!

    Issues installing iTunes or QuickTime for Windows
    solving MSVCR80
    iTunes 11.1.4 for Windows: Unable to install or open
    Troubleshooting issues with iTunes for Windows updates

  • TS4002 I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password I want a solution to the problem, because in this way I

    I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password
    I want a solution to the problem, because in this way I will not benefit from the iPad

    There is no solution.  You have to provide the ID and password.  There is no way around it.  If the person you bought it from can't provide it, return it and get your money back.

  • Can not access server's on public ip's

    Guys,
    We have a core switch with two fibre lines connecting us through two different ISP's to the internet. These ISP's have provided us with a range of public ip's each. We have a few routers on some of these ip's and they are working fine and we can access them externally (telnet and ssh).
    I am now busy setting up two servers, one on each ISP with their respective public ip's. I can ping the core switch and the isp gateways from the servers and from the core. I have triple checked that there are no active firewalls and I can see that the http ports are open and accessible (TcpView). But for the life of me I can not access those servers externally. I am now completely stumped. I do suspect though that it is a routing problem through the core.
    And herewith the relevant parts from my Core switch's config:
    version 12.2
    service tcp-keepalives-in
    service tcp-keepalives-out
    hostname SMS-CORE
    no aaa new-model
    clock timezone ZAR 2
    no ip source-route
    mls netflow interface
    mls cef error action reset
    spanning-tree mode pvst
    spanning-tree portfast edge default
    vlan internal allocation policy ascending
    interface FastEthernet3/25
     switchport
     switchport access vlan 153
     switchport mode access
    interface FastEthernet3/31
     switchport
     switchport access vlan 153
     switchport mode access
    interface FastEthernet3/35
     switchport
     switchport access vlan 153
     switchport mode access
    interface FastEthernet3/37
     switchport
     switchport access vlan 20
     switchport mode access
    interface FastEthernet3/47
     switchport
     switchport access vlan 20
     switchport mode access
    interface FastEthernet3/48
     ip address 192.168.2.2 255.255.255.252
    interface Vlan1
     no ip address
    interface Vlan20
     ip address PUBLIC_IP1 255.255.255.240
    interface Vlan153
     ip address PUBLIC_IP2 255.255.255.248
    ip classless
    ip route 0.0.0.0 0.0.0.0 192.168.2.1
    ip local policy route-map PUBLIC
    access-list 100 permit ip ISP2_NETWORK 0.0.0.7 any
    access-list 101 permit ip ISP1_NETWORK 0.0.0.15 any
    route-map PUBLIC permit 10
     match ip address 100
     set ip default next-hop PUBLIC_GW2
    route-map PUBLIC permit 20
     match ip address 101
     set ip default next-hop 192.168.2.1
    Any  ideas guys, I am at my wits end here ....
    Thanks as always !

    Hi Oliver , 
           Have you got IP Address assigned to your server from the same segment ?? like for server 1 
    ip address PUBLIC_IP1 255.255.255.240
    and for server 2 
    ip address PUBLIC_IP2 255.255.255.248
    What is the gateway IP address assigned for both servers .
    HTH
    Sandy

  • Can not access Server admin site

    I can not access http://MYSERVER1:50000 site. I get error "The page cannot be displayed. The page you are looking for is currently unavailable.".
    But I was able to access even yesterday. Could you tell me any possible problems and how to fix the error?
    Thanks!
    Mike

    Hi Mike
    That means your J2EE engine is not running...
    Restart the engine, also check that the DB is up and running.
    Regards
    Juan

  • Can not access BIOS after update BIOS

    Can not access BIOS after update X220 BIOS to version 1.19
    Type: 4290-R32
    BIOS: 1.19
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
    Ask google and try anyway but not work
    - Press ThinkVantage, Press F1, Press Fn+F1
    - Power off, unplug AC, unplug battery, wait 15 miniute, try all again
    - Try to update BIOS again

    That is really weird.
    When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
    //JameZ
    Check out the Community Knowledge Base for hints and tips.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    X240 | 8GB RAM | 512GB Samsung SSD

  • Can not access the Instance Data of a Singleton class from MBean

    I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
    I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
    Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
    Can anyone explain or have hints on what's happening ? Any help will be appreciated.
    I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
    Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
    Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
    I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
    http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
    http://www.theserverside.com/discussions/thread.tss?thread_id=12194
    http://www.jguru.com/faq/view.jsp?EID=1051835
    Thanks,
    Krishna

    I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
    I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
    Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
    Can anyone explain or have hints on what's happening ? Any help will be appreciated.
    I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
    Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
    Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
    I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
    http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
    http://www.theserverside.com/discussions/thread.tss?thread_id=12194
    http://www.jguru.com/faq/view.jsp?EID=1051835
    Thanks,
    Krishna

  • I'm note a firefox geek, but ever since my friend told me to install NoScript I can not access my msn and hotmail page. It tells me that Java Script is required, what ever that is. What do I do next. Do I uninstall the No Script. Thanks Ed

    I'm note a firefox geek, but ever since my friend told me to install NoScript I can not access my msn and hotmail page. It tells me that Java Script is required, what ever that is. What do I do next. Do I uninstall the No Script. Thanks Ed edit
    Details

    You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
    Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
    If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
    Once you are using the "Firefox" button ...
    Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
    To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
    You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
    * http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

  • Can not access the media card files Blackberry 8310 - HELP

    Can not access the media card files Blackberry 8310.
     I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
     Here are the messages:
     “A media card has been inserted that contains encrypted content which will be unaccessible by this device”
     I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
     Media card support – ON
    Encryption Mode: - Security Password & Device
    Encrypt Media Files – YES
    Mass Storage Mode Support – OFF
     Please note – I can not change the encryption mode since it is set by policy
     Security Options – General Settings – Content Protection – Disabled
     The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
     Unable to display file /media card/ pictures/ing000000xx.jpg.rem
     Here is what I have tried (from the advice on this board):
     1)     Read the files directly off the media card – No good
    2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
    3)     Email the file then read it – No good
    4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
    5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
     So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
     All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
     Thanks for any help you can offer!

    Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

    I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

    What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
     Cheers, Tom

  • I can not access my itunes library on Apple TV. How do I turn on home sharing?

    I Can not access my itunes library on Apple TV. How do I turn on home sharing?

    Happy to help you :) go to seeing and than general or settings than iTunes store it's for sure in settings but you may want to set it up on your computer in which case it's (windows) edit > preferences (Mac) iTunes preferences

Maybe you are looking for

  • My WD external hard drive will no longer show up on my Macbook pro.

    My WD external hard drive will not longer show up on my macbook pro.  The light turns on and you can hear it running but it won't show up either in finder or in the disk utility.  This happened a while ago but I really want to get all my photos off t

  • How to divide time capsule for Mac and PC back up

    Want to know if a cant use my time capsule to do back up for my MacBook and do manual back up for the PC of my wife

  • 3210 not recognized by a IMac running 10.10.1 for scanning

    I'm attempting to hook up my 3210 to a new Mac running 10.10.1. It is connected by USB cable. I tried printing, and that works fine. If I try using Scan Picture via SP Device Manager I get the response that the scanner could not be initiallized and a

  • Using output from dynamic DL to add to sharepoint group

    Hi, I have output a dynamic DL to a variable $people but am unable to add users to a sharepoint group with the method below: $poeple | foreach {Add-SPOUser -Group "US Team Members" -Site https://contoso.sharepoint.com -LoginName $_.PrimarySMTPAddress

  • Document type 107 - Full Text indexing

    Hello, We have a custom crawler that is using docfetch to look at plain text documents. In the crawler code, we set the document type like this : metaData.ContentType = "text/html"; But the document type always comes out as 107 (zip/exe) Am I doing s