Can not access internet via wired connection, wireless working OK

Background information,Came home from vacation turned on PC to access email.Emails started downloading then stoped,started getting messages that firefox stopped working and Thunderbird quit working and others.My desktop is attached to a verizon router.all my other devices are wireless and are working fine through the same router.I connected my laptop to the lan connection, turned off wifi and accessed the internet via lan connection.Using device manager, checked drivers, says up to date, also says that it is working properly.I have gone to the command line and can ping google.com.I can ping the loop around. ping127.0.0.1I have done the ipconfig/release,ipconfig/renew, and ipconfig/flushdnsipconfig/all indcates that it is there and enabledMy Lan connection is part of the mother board.can not access internet via wiredconnection.Not sure what to do next.Help Please

Reply: I spent about an hour last night doing all the things that you suggested including moving the lan cable from my desktop to my laptop which worked fine. When I hoover over the connection it says; Network3 Internet Access no error messages.When I unplug the cable at the router a red x covers that connection icon.Plug it back in red x goes away.It is seeing the router, just does not appear to be providing selected web page info.Computer thinks it is working fine.

Similar Messages

IPhone 5s can connect to wireless WIFI router but can not access internet.

iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
TIA
Rich

You IT person should be able to sort this out. But, they seems to be too busy or disinterested to do this. Suggest you provide the it person with an iPhone to get interested.
Any could be lots of things.
The best you can do is to get access to the admin setup for networking on a pc? The internet settings are all the same. Only what names the manufactures change from OS to OS. Check and compare parameters.
Phone works to internet at home, I assume?

I can not access the hard drive connected to my airport extreme! Any thoughts?

I can not access the hard drive connected to my ariport extreme. When I use the finder to connect a server and type in the IP of the a. extreme, 10.0.1.1 it does not work and I get an error message.
Any thoughts.
A

Is the hard drive formatted for Mac in Mac OS Extended (Journaled)?
If yes, you may need to use a powered USB hub since the USB port on the AirPort Extreme is under powered and it is often necessary to use a powered hub....even if the hard drive has its own power supply
If both items check out above.....have you checked Finder Preferences to make sure that "Connected Servers" will be displayed?
Finder Preferences > General > Show These Items on the Desktop > Connected Servers
Then with the Finder menus displayed at the top of the screen click the Go menu
Click Network and the AirPort Extreme icon should be displayed
Double click the icon to mount the drive on the desktop

Security photo - does not show any apps that have requested access. I can not access photos via apps. How to fix it?

Apps can not access photos.
Apps never asked if they could access photos.
Security>Photos - there are no apps on the list.
I have restarted.
Backed up, restored.
No improvement.
Thanks.
ps my iphone allows access, so I know 'how' to do it usually.

Found the answer:
Go to settings/general/restrictions/photos and allow the apps to have access to photos

Can't access photos via windows, everything else works iTunes, external software etc.

Hello,
Since I installed Windows 8.1 I have quite big problem, can't access photos via windows explorer. iTunes and other software can see phone and works completely fine.
There is error 28 in device manager.
Tried uninstalling all services including iTunes itself and got latest iTunes today and still no luck.
Anybody knows solution to this ?
(iPhone 4S iOS 7.0.4)

Is it just me, who got this issue ?

IPhone can't access internet via home Airport network

Hello,
a work colleague of mine has an iMac at home with a single Airport Express unit through which he plays music. He connects his iMac to the internet via an ethernet cable. He has just purchased an iPhone with an Orange contract. His son also has an iPhone through his employer.
Neither my colleague nor his son can access the internet with their iPhones via my colleague's home Airport network. Both iPhones recognise the Airport network, evidenced by the 'fan' icon that appears on their iPhones.
(Hope the above makes sense.)
I have emailed my colleague several 'help' articles, including those put out by Apple. My colleague has also communicated with someone from Apple (AppleCare I think?) but the problem persists.
Both iPhones apparently perform okay apart from this one irritating instance. Can anyone suggest what is wrong?
Many thanks,
Bob.

If it's an N Airport, I have heard that iPhones don't play well with N routers even if they are backward compatible with G.
Otherwise, they could try going into Settings/Wifi. See if the network shows up. Try clicking on it and see if it connects.
If that doesn't work click on the little arrow on the right side next to the network. This will reveal the network settings. Make sure that it's set on DHCP if that is how they acquire an IP address or static if that's what they use. If it's static, you'll have to put in the settings.

Can i access internet via apple tv

Can I access the internet via Apple TV? I would like to watch BBC iPlayer and use last.fm, for example.

http://www.apple.com/appletv/
the internet services the atv support are listed on the site
the only way for the atv to work with the items you mention is by using airplay from an iphone or ipad or ipod touch

Can't access Internet via Ethernet port of 'n' Express in 'Extend' mode

I just purchased the new Airport Express (AXp) n version for the purpose of extending my Airport Extreme (AXt) n version wireless network so that I can connect my old MacBook Pro (MBP) 17" core duo, running Mac OS X 10.5.2, to the AXp via an Ethernet cable when the MBP is stationary at my desk, in order to increase the maximum speed at which I am able to access the internet, from 54 Mbps for my MBP's internal wireless g card to 130 Mbps at which the AXp runs in the following configuration.
On the AXt, I set the wireless mode to create a wireless network, checked off the option to allow this network to be extended, set the radio mode to n (b/g compatible), set the channel to 11 (works best for our house), and set the wireless security to WPA/WPA2 Personal. On the AXp, I set the wireless mode to extend a wireless network, unchecked the option to allow wireless clients (I have also tried this option checked, as well), and set the wireless security to WPA/WPA2 Personal. Both Airport bases are running firmware version 7.3.1.
When I do this everything looks fine. My network preferences indicate that I have a valid IP address, and I am able to see and screen share with other computers on the local network; however, when I try to access the internet using Safari 3.1, I get a timeout error message indicating that the server I addressed is not responding. Then when I run the diagnostics from the network preferences, it indicates that my internet connection appears to be working correctly, and all the network status lights show green.
Any ideas?

Thanks so much for all your replies. I will try to address all the points in this reply.
99, I think you are right, about Apple not supporting using the Ethernet WAN port as a LAN port when the AXp is in the "Extend" mode. However, I had read on the Apple website that it does support using the AXp WAN as a LAN in the WDS "Remote" mode, as you have verified with your older AXp, and which I had also verified with my new AXp. The only problem was, when using the AXp in the WDS "Remote" mode, the AXp ran ONLY at 54 Mbps, even when there were no additional wireless clients connected to it or to the AXt, which kind of defeated the purpose of using the AXp as an Ethernet bridge in the first place.
The only way I could get an AXp bridge to run at 130 Mbps was to use it in the "Extend" mode or the "Join" mode. In the "Join" mode, using the WAN as a LAN works fine when connecting to the Internet, but I am not able to see or screen share with any of the computers on my local network. In the "Extend" mode, I am able to see and screen share with all the computers on my local network, but I am not able to get to the Internet, even though the Network Diagnostic tool reports that my Internet connection "appears" to be working properly, and it gives me all green lights (and as near as I can tell with my limited knowledge of DNS, all that information appears correct, as well).
Bottom line, I don't think Apple has properly enabled the AXp's WAN as a LAN in the "Extend" mode, as they have in the "Join" mode and in the slower WDS "Remote" mode.

Can not access FWSM via session command in cisco 6513 (VSS enabled)

Dear All,
              Today i received FWSM from cisco (RMA), I need to configure it as standby unit for existing FWSM active/standby setup.
IOS on RMAed FWSM is 2.3.4 and cisco VSS supports FWSM IOS 4.0.4 and later.
My issue is, I cannot access FWSM (IOS 2.3.4) via session command from cisco 6513 but could successfully consoled it without any problem. I have reloaded it twice and also tried to disable and enable power on it.
VSS#sh module switch 2
Switch Number:     2   Role: Virtual Switch Standby
Mod Ports Card Type                              Model              Serial No.
   2    6 Firewall Module                        WS-SVC-FWM-1 -----------
Mod MAC addresses                       Hw    Fw           Sw           Status
2 0034.2fd7.3b04 to 0019.2fa7.3b0b   4.2   7.2(1)       2.3(4)       Ok
Mod Online Diag Status
2 Pass
VSS#session switch 2 slot 2 pro 1
The default escape character is Ctrl-^, then x.
You can also type 'exit' at the remote prompt to end the session
Trying 127.0.1.21 ...
% Connection timed out; remote host not responding
Can someone please let me know why I cannot access FWSM through session command ?
Whether this is because of older IOS ? If yes then how to upgrade its IOS ?
Is it possible to upgrade IOS via FWSM console ? if yes, please let me know.
Do i need to test on different slot ?
Look forward to hearing from someone.
Thanks & Regards
Ahmed...

There is a limitation that FWSM running version older than 4.0.4 will not accept session from the switch if the FWSM is not seated into switch 1 AND if switch 1 is not active.
So to upgrade the FWSM you either need to use the console or put the FWSM physically in switch 1.
Thanks,
Jeroen

Can not access DTR via NetWeaver Developer Studio

Hi all,
I'm able to access DTR in the browser with this URL : http://<servername>:50000/dtr
That's good.
Now ... I specified the same DTR server URL when creating a new DTR client in NWDS.
When I tried to log on it says :
Ping on server http://<servername>:50000/dtr/ returned: 401 Unauthorized
User not authorized for server http://<servername>:50000/dtr/
Howcome I can login via the browser but not via NetWeaver Developer Studio ?
Can anyone help me with this issue plz ?
Kind regards,
Abjuh

Hi Slava,
Thx for your answer.
Indeed my user & paswords where different on some systems.
Now I made sure that all usernames & paswords are the same on every system.
Issue solved !
Thx & regards,
Abjuh.

Can't access internet via Airport even when I have full signal

MacBook
When I turn Airport on I get full signal from my wireless connection but when I open Safari it says it cannot connect to the internet. I have had my MacBook since December '06 and it never gave me this problem before. Only in the last month is it giving me this problem. I am using the exact same wireless connection as before......i dunno whats going on. Please help.

I was just going to post this exact topic! My iBook connects to my home Airport Express flawlessly, and my iPhone can detect and connect to it, but then it doesn't display the WiFi logo (it still uses EDGE). Any help for the three of us?

Sprint says Q10 can not access internet/data in Chas/Hunt WV area

So I upgraded to a new Q10 and spent a few hours loading and configuing all my emails, etc.
Driving to work this morning, I noted that there was no emails received after I left my house (wifi-enabled). Tried to open the Browser and received the error stating there was no connection to the internet. Wasted most of the workday fiddling with the settings --- no joy. So on the way home I stop at the Sprint store. I walk in and showed the guy my phone and said, "I need some help with this."
He immediately said, "No internet or data?" Dayum. He went on to say that BB 3G/4G v10 won't work in this area and that BB was aware of the problem. Something about Sprint sharing towers with Intelos and the phones won't recognize something. Over my head, but all other smartphones work here...just the BB Q10 won't.
Really bites --- when I'm on WiFi the thing rocks and is everything I need in a smartphone. So much better than my daughters iPhone 5...except for this.

Not sure if the same but
my brother is unable to get Data on his Sprint iphone unless its on LTE and most where he is is not LTE enabled.
It still makes calls and recieves calls but no data.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Can not access web wifi simble on but can not connect the the internet

wifi on but can not access internet

I COULD SOLVE THE PROBLEM!!! : CHANGE YOUR ISP
I it is obvious that we are talking about different issues, but all arise from the same origin. I am a surgeon and fortunately one of my patients is executive manager of one of biggest ISP companies from which I have bought my Internet service for home and my clinic.
One day I told him the problem and he promised to check it for me. A few days later he called me and discussed the exact problem (unfortunately as I am not I.T professional, I couldn’t understand it well, I can just remember he was talking about MULTIPLEXING incompatibility between Mac security settings and that specific ISP multiplexing settings, He also said they had similar problems with some Linux users. I can remember he relate the problem to cheap ISP hardware, which leads to security issues which are ignored by Windows Systems but leading to connection blockade in Mac Browsers. That’s why if you PING yahoo.com, you will see everything is OK but your browsers are not working)
In fact this is a hardware issue which is related to ISP (Internet Service Provider) security and not your Mac.
The day after, I took my MacBook to some ISP offices and asked them to let me connect to their line just for a test. “ Surprisingly I found out without changing my MacBook’s settings it works well with some ISPs and not with others!! “
I have two ADSL lines: one at home and one in my clinic. First I changed my home ISP and everything is well at home from the day I did the change. But before changing my clinic’s ISP it worked at home and not at the clinic. Later I changed my clinic’s ISP and afterward never I had any problem. This proves ( as that manager said also) this problem is related to ISP and not Mac itself and that’s why Apple could not have resolved the problem yet: different ISPs have different issues.
Here I can make some suggestions:
1- First, take your MacBook into different ISP offices and find the one which works well (before making the contract and paying money to the ISP, restart the Mac or send it into sleep mode repeatedly to make sure the connection never drops with restart or sleeps)
2- Change your modem: Modems as TP-LINK, D-LINK, are not well compatible with Mac. Apple modems or Linksys are perhaps the best choices (this is not main cause of internet drop, but can affect the performance)
3- Make sure your neighbor’s Wi-Fi is not exactly on the same channel as you are using (I use iStumbler for finding my neighbor’s channels)
4- Find best DNS: ask your ISP to provide you most compatible DNS’s for you. Perhaps most known DNSs are 8.8.8.8 and 4.2.2.4.It helps you to browse the Internet more efficiently
Some people in other forums suggested that upgrading to Mountain Lion has helped them. But It didn't work for my clinic's line. Just changing the ISP at clinic resolved my problem
BETWEEN THESE 4 SUGGESTIONS, THE FIRST ONE IS THE MAIN SOLUTION AND NO 2-4 CAN HELP THE PERFORMANCE.
Move on!!! Change your ISP and let me know if it works!!!!

Users of Windows 7 Computers connected to Domain but can not get Internet Randomly

After crash of DC, I have replaced the domain controller server 2008 with another machine but with same name. I got trust relationship issue, which I resolved by disjoining and rejoining. After this I am facing below mentioned issue on computers randomly.
High Privileges users have no issue with internet access. Low privileges users can not access internet on workstations randomly. Users login properly, all group policy settings applied to them. but internet does not work with them using Internet Explorer
and Google Chrome. All pings work fine. I viewed the proxy settings by command line as proxy settings are disabled for low privileges users. It was correct but still internet was not working. While over Firefox by adding manually proxy(not set
through group policy), internet works.
When I tried to login through a new user which has not logged in over affected machine. Internet works. After logging off by new user and logging on old users (already created profiles), internet starts working for them too. I am afraid may this trick does
not work on other machines.
Now I want to know, if above mentioned trick does not work what should I do to activate the internet. What is the root cause of this issue.

Hi,
Did you mean you set the same proxy, high privileges user could keep connection and low privileges user drop connection randomly? At the same time, Firefox also could keep connection, right?
Please try to reset Winsock and DNS for a test on problematic computer. Open command prompt with Administrator Previleges, then type the following commands.
netsh int reset
ipconfig /flushdns
Besides that, update the network driver for test.
Karen Hu
TechNet Community Support

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

Thanks for your note. My tech dept could not come up with any explanation for the dictation tool not working. We have about 1,000 employees in our office - I think I will send an all employee message to see if anyone else has the issue.

Can not access internet via wired connection, wireless working OK

Similar Messages

Maybe you are looking for