Can not access my email to verify my apple id is there any other way please help
Need help in verifying my Apple ID can not access my email is there any other method?
Hello Kimstout,
Thank you for contacting Apple Support Communities.
The following article gives an overview of the two-step verification for Apple ID and provides the options for verification.
Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/HT5570
Regards,
Jeff D.
Similar Messages
-
Hi, I have lost my iphone but i have its backup in itunes, how can i restore using itunes or is there any other way for this
please suggestYou can restore that backup to a replacement iPhone, if that's what you're asking. If you want to extract data from the iPhone backup, you'll need third-party software to do so:
http://www.iphonebackupextractor.com/ -
I have photos on my iPad that I want to delete. The problem is I don't have access to the computer used to sync them. It was my ex husbands computer and iTunes account. Is there any other way to delete them?
Not sure is any of these methods will work.
The links below have instructions for deleting photos.
iOS and iPod: Syncing photos using iTunes
http://support.apple.com/kb/HT4236
iPad Tip: How to Delete Photos from Your iPad in the Photos App
http://ipadacademy.com/2011/08/ipad-tip-how-to-delete-photos-from-your-ipad-in-t he-photos-app
Another Way to Quickly Delete Photos from Your iPad (Mac Only)
http://ipadacademy.com/2011/09/another-way-to-quickly-delete-photos-from-your-ip ad-mac-only
How to Delete Photos from iPad
http://www.wondershare.com/apple-idevice/how-to-delete-photos-from-ipad.html
How to: Batch Delete Photos on the iPad
http://www.lifeisaprayer.com/blog/2010/how-batch-delete-photos-ipad
(With iOS 5.1, use 2 fingers)
How to Delete Photos from iCloud’s Photo Stream
http://www.cultofmac.com/124235/how-to-delete-photos-from-iclouds-photo-stream/
Cheers, Tom -
So I didn't set up a rescue email for my Apple account because I forgot all my security questions and I can't create a new one, the only option is says is to call Apple but I don't talk a lot on the phone and I hate general phone conversations. Is there another quick way I can contact Apple about making a rescue email? Or a way that I can make a rescue email? I have £40 balance on my account and I can't buy anything without resetting these questions by making a rescue email.
You won't be able to add a rescue email address until you can answer your questions, you will need to contact Support in your country to get the questions reset - contact is normally by phone as they need to confirm your id and that it's your account.
Contacting Apple about account security : http://support.apple.com/kb/HT5699
You can try contacting Support via this form, but they are likely to require phone contact : https://ssl.apple.com/emea/support/itunes/contact.html
When they've been reset you can then use steps 1 to 7 half-way down this page to add a rescue email address for potential future use : http://support.apple.com/kb/HT5312 -
I added a voucher to my account and now i cannot spend the money on it as it asks me to answer security questions, i have not used the iTunes store in many months and so i have no idea what the answers are to them. And the rescue email i setup is no longer an account I use so i cannot acces it to reset the questions, am i stuck or is there a solution?
You need to contact Apple. Click here, phone them, and ask for the Account Security team.
(86477) -
I can not access the email alternative to change the secret question
I can not access the email alternative to change the secret question
You will have to use your once a year option to deauthorize All. See iTunes Store- About authorization and deauthorization.
-
After getting a txt message from bell today saying I went over on my data usage , I can not access my web browsing at all... There is no restrictions on my account. But I still can't load safari... I can still makes calls and send txt messages but I can't send iMessages
Settings > General > Reset > Reset Network Settings.
-
The volume up button of my iphone 5 is not working and i can barelly listen my conversations, is there any other way that let me raise the volume?
Yes go to settings, general, accessability and turn on assisive touch. A little square will appear, click it click more
(the arrow) and select volume up. For more information tell me. -
Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way?
Can we use Apple tv to present with iPad wirelessly but no internet? if not, is there any other way? Please tell me what's the best solution if I want to present what's on the iPad screen to TV or projector withtout using internet network or small range of bluetooth.
yes
-
My ipad mini is frozen in an app and the home button is stuck. Pressing the wake/sleep button does not bring up the red slider to turn the ipad off. Is there any other way I can reset the ipad? Can I remove the battery? and then put it back in?
barbarafromnl wrote:
Can I remove the battery?
No the battery is non removable.
Try a Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons... -
everything is very small, text, pics, programs dont even fill 1/4 of a page I can not read it and if i click apple plus things overlap each other so now what???
Can you think of any recent changes on your computer or in Firefox, new programs, add-ons, etc.?
Have any cats walked across your keyboard recently?
My first guess is the same as yours, which is a "zoom" issue. Holding down the Command key and pressing 0 (zero) should reset the zoom level of the current site to the standard level. Is that still too small?
Regarding content overlapping, this can occur for a few different reasons. Please check on these:
(1) "Text Only" zoom
If View menu > Zoom > Zoom Text Only has a checkmark, click it again to unselect it.
(2) Manually setting font sizes
In the Preferences dialog (either the "3-bar" menu button or the Firefox menu) > Content > "Advanced" button
If the Minimum font size is set to a number larger than 9, change it to 9 or None. A large minimum font size often will wreck the layout.
At the top, there is "Fonts for" drop-down that usually will say Latin or Other Writing Systems. You will want to make the same change for both of those, so select whichever one isn't currently displayed.
Finally, make sure the checkbox for "Allow pages to choose their own fonts" is checked and OK out of the dialog.
Any difference so far? -
Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?
Early this morning from my way to office when I plug my iPhone 3gs to my itrip in my car it is working fine. But when somebody called in my iPhone it suddenly turn off, and I can not turn it on again. I really don’t know what to do, please help me?
-
hi, I reset my iphone 3gs, and it brought an apple logo on the screen so I restored it to version 6.0 but it can not accept a sim or connect to itunes for activation.what do I do, please help me
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
But... if the Device has been Modified... this will Not necessarily work. -
My old Apple ID was tied to an email address that I no longer have access to. My security question answers don't seem to work. Is there any other way to retrieve my password?
I have a new Apple ID - I would love to be able to merge them. Is that possible?You need to contact Apple. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(90031) -
Is there any other way to limit the data a user can see
We are using Discoverer 10.2.xxx
We are running it against an Oracle applications database but we do not have Discoverer integrated with the apps. I have created database users for discoverer and granted access to the data at the db level.
We have about 40 salesreps and we only want each rep to see their own data. We have a high turn over with the reps
For now, I have created the row level security in that folder in my eul. If the username = XXXX then Salesrep = XXXXX
OR
If username = YYYY then DSM = YYYY
etc.. This goes on for about 40 users We have 3 levels of "users" - Salesrep, DSM or RSM (District or Region sales manager)
These users are setup in my apps and I can write a database procedure to select their salesrep name based on their username.
Is there any other way to limit the data that the salesreps can see ?
Possibly with a stored procedure some way?
Thanks
AngieAt a previous client's, I had created a system not too unlike what you're describing.
Basically, I created an Oracle table that stored information concerning the salesperson as in Oracle Apps the data was not reliable for what they were doing (ie: with adding Apps modules, sometimes salesperson data was there, but with say, CRM, it was in another place, etc.).
So, since this table was going to be used for driving everything about a salesperson (commissions, who they report to, when they started, territory, when / if they moved territories and/or manager, etc, etc.) I put lots of good stuff in it that would make life easier for them.
The end user in charge of all this had was given a Form to add, edit, delete all this good stuff and they were happy.
When it came time for security, it worked like a charm in that I used the concept of the BIS views where a user has an apps id associated to them and all data was filtered by that id. All I really had to do was to create this view that simply filtered data to that user's id. Then whenever I had a Discoverer report for salespeople, managers, etc. I just made sure the folder used had a join to this filtering view and I chose an item from the filtering view and all worked fine. All Discoverer reports only returned row level information for the salesperson who ran it.
Likewise, the same Oracle table was queried by another security view that only brought back the same IDs for the salespeople associated to each manager. When this simple view was joined to any sales Discoverer folder (and used in Disco), it limited all data to the salespeople the manager was responsible for.
Obviously this is just an overview and would take pages to explain, but essentially, if you can associate some kind of unique ID to each salesperson (I used the one returned in BIS views when someone logs into Apps, but you could just assign a different in your case), then you can create a view that filters to that id. Then when that view is brought into the EUL and joined to any other folder in the sales area (and you choose a column from the security view), you'll have what you're referring to - row level security for all salespeople and managers.
When it works - it sure does look impressive.
Russ
Maybe you are looking for
-
Same bank in different company codes reported in same EBS file
Hi friends, We have a bank statement coming from Bank of America where we have two bank accounts, bank account 1 in Cocd 1 and bank account 2 in Cocd 2, now when I try to upload this statement, it gives me an error: Bank details 00XXXXXXXXX9 not in
-
Firefox does not maintain magnification set. (Resolution at 1900x1280)
Computer resolution set to 1900x1280 (HDMI out to HDTV) When browsing, must use the magnifier to be able to read screens. Either by ctrl,+ or by ctrl/mousewheel. As soon as I navigate away from a page, I have to re-magnify everything again. Prior to
-
Firefox does not show Flash based Soundcloudplayer after embedding
Hi There, I have some problems with embedding from flash based content because firefox does not show the embedded content. Last week and the time before everything went fine but now the Flash based player of Soundcloud doesn't work anymore. I've trie
-
Why does muse not properly support alt tags for images?!?!
Greetings, I am fully aware that when you place an image on your site page, right click, click edit image properties, you can then create the title text (by writing the contents in the Tooltip box) and create Alt Text (by writing the contents in the
-
Can't select Acrobat Pro for update 8.1.2
Hi Everyone, I'm fairly new to this forum, and so far I've found it helpful. I'm a graphic design student and recently got CS3 Design Premium. I'm running OSX Leopard, and every time I try to update Acrobat Pro 8, the updater asks me to select my cop