Can not access my gmail
I use a MAC which is a part of a small home network and suddenly yesterday I was no longer able to access my gmail using MAC mail. Instead I get an error which says "The connection to the server "imap.gmail.com" on port 993 timed out". It's not a password problem because I can go to gmail on the web, type in my password and see my mail there. It also not a general problem on our home network because I can use MAC mail on my iPad and see my mail and my husband was able to set up an account on his MAC using my credentials and he can see my mail, so I believe it must be something specific to this MAC. Can a port "go bad"?
Sorry but I guess I should have mentioned that I did that already twice, once restarting and once shutting down. I also tried quitting and restarting mail, and deleteting and rebuilding my MAC mail gmail account.
Similar Messages
-
Can not access my gmail - need to turn cookies on
can not access my gmail - need to turn cookies on
This link should help - https://support.mozilla.com/kb/Websites+say+cookies+are+blocked
-
After I updated to the new OS I can not access my GMail account????
After I updated to the new OS I can not access my GMail account???? "The user name or password for GMail is incorrect"???
Found this answer on another thread. It solved my problem:
For those having gMail issues.
Go here on your computer (or phone)
https://www.google.com/accounts/UnlockCaptcha
Unlock your account.
They will block checking if you check too often from a variety of IP's. So jumping from Cell, to Wifi, to Cell, to another Wifi, etc a lot they will block remote checking and only allow web checking until unlocked.
Can also happen if you have a computer setup to check at a high interval. -
Can not access my gmail account from Thunderbird mail client - account marked with padlock
I am moving from an telia.com to a gmail.com mail account using a thunderbird mail client. Has been working fine until last evening. When my client could not access gmail anymore. The problem is displayed with a padlock o n the mail account.
Yes OK padlock has been there before problem occurred - still I have the problem Thunderbird just keeps on working and is not able to access gmail server and I do not see any error indication
-
When I plug in my Ipod Touch to my computer I can not access my Itunes library. The following message appears "The program cant start because MSVCR80.dll is missing." Also, another message appears as well - "Error 7 Windows error 126" as well as APSDaemon.exe.
I have NO IDEA what the heck to do.
Any ideas?
Thanks!Issues installing iTunes or QuickTime for Windows
solving MSVCR80
iTunes 11.1.4 for Windows: Unable to install or open
Troubleshooting issues with iTunes for Windows updates -
I bought iPad and I can not access, A message appears asking me account and password when i return to the person who I purchased it from him, he told me that he forgot the account and password
I want a solution to the problem, because in this way I will not benefit from the iPadThere is no solution. You have to provide the ID and password. There is no way around it. If the person you bought it from can't provide it, return it and get your money back.
-
Can not access sample & admin tools after configuring Oracle8.1.7
Hi all,
I am using WLS6.1(sp2) and WLPortal4.0(sp1).
I changed the default database(i.e. Cloudscape) to Oracle by following the doc
http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
But, after setting up the Oracle8.1.7, when i try to access the sample stock portal
from the homepage, i am getting the following exception
PortalPersistenceManager: portal 'portal/stockportal' not found
<Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP> <[WebAppServletContext(1467076,stockportal,/stockportal)]
Servlet failed with S
ervletException
javax.servlet.ServletException: Received a null Portal object from the PortalManager.
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalRequest(PortalWebflowServlet.java:194)
at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
even i can not access the admin tools.....i get the follwing error when i try
to access the portalTools/index.jsp
<Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could not resolve
a destination given: appname [tools], namespace
[admin_main], origin [begin], event [defaultEvent] with request id [3121877];
Attempting to load Configuration-error-page.>
<Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsing uri /portalTools/application,
path null, query string n
amespace=admin_main - Webflow XML does not exist, is not loaded properly, or you
do not have a configuration-error-page defin
ed.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
node was not found in the webfl
ow xml file. for webapp [tools], namespace [admin_main]. While trying to display
CONFIGURATION ERROR: [Exception[com.bea.p13n
.appflow.exception.ConfigurationException: Bad Namespace - namespace [admin_main]
is not available for webflow execution. Mak
e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurationError(WebflowExecutorImpl.java:786)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:484)
at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:419)
at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Am i missing any step here???
can anybody help me????
thanks
Vijayoops...i missed step5.
it is working now after doing the sync.
thanks
Vijay
"Daniel Selman" <[email protected]> wrote:
Did you sync the applications and load the sample data?
Sincerely,
Daniel Selman
"vijay bujula" <[email protected]> wrote in message
news:[email protected]...
Hi all,
I am using WLS6.1(sp2) and WLPortal4.0(sp1).
I changed the default database(i.e. Cloudscape) to Oracle by followingthe
doc
http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
But, after setting up the Oracle8.1.7, when i try to access the samplestock portal
from the homepage, i am getting the following exception
PortalPersistenceManager: portal 'portal/stockportal' not found
<Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP><[WebAppServletContext(1467076,stockportal,/stockportal)]
Servlet failed with S
ervletException
javax.servlet.ServletException: Received a null Portal object fromthe
PortalManager.
atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalReq
uest(PortalWebflowServlet.java:194)
atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWe
bflowServlet.java:99)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
l.java:241)
atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
even i can not access the admin tools.....i get the follwing errorwhen i
try
to access the portalTools/index.jsp
<Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could notresolve
a destination given: appname [tools], namespace
[admin_main], origin [begin], event [defaultEvent] with request id[3121877];
Attempting to load Configuration-error-page.>
<Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsinguri
/portalTools/application,
path null, query string n
amespace=admin_main - Webflow XML does not exist, is not loaded properly,or you
do not have a configuration-error-page defin
ed.
Exception[com.bea.p13n.appflow.exception.ConfigurationException: The
configuration-error-page>> node was not found in the webfl>> ow xml file. for webapp [tools, namespace [admin_main]. While tryingto
display
CONFIGURATION ERROR: [Exception[com.bea.p13n
appflow.exception.ConfigurationException: Bad Namespace - namespace[admin_main]
is not available for webflow execution. Mak
e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurati
onError(WebflowExecutorImpl.java:786)
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
est(WebflowExecutorImpl.java:484)
atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
est(WebflowExecutorImpl.java:419)
atcom.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowS
ervlet.java:132)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
l.java:241)
atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
at jsp_servlet.__index._jspService(__index.java:92)
at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:265)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
:200)
atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
ntext.java:2495)
atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
:2204)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Am i missing any step here???
can anybody help me????
thanks
Vijay -
Can not access server's on public ip's
Guys,
We have a core switch with two fibre lines connecting us through two different ISP's to the internet. These ISP's have provided us with a range of public ip's each. We have a few routers on some of these ip's and they are working fine and we can access them externally (telnet and ssh).
I am now busy setting up two servers, one on each ISP with their respective public ip's. I can ping the core switch and the isp gateways from the servers and from the core. I have triple checked that there are no active firewalls and I can see that the http ports are open and accessible (TcpView). But for the life of me I can not access those servers externally. I am now completely stumped. I do suspect though that it is a routing problem through the core.
And herewith the relevant parts from my Core switch's config:
version 12.2
service tcp-keepalives-in
service tcp-keepalives-out
hostname SMS-CORE
no aaa new-model
clock timezone ZAR 2
no ip source-route
mls netflow interface
mls cef error action reset
spanning-tree mode pvst
spanning-tree portfast edge default
vlan internal allocation policy ascending
interface FastEthernet3/25
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/31
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/35
switchport
switchport access vlan 153
switchport mode access
interface FastEthernet3/37
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/47
switchport
switchport access vlan 20
switchport mode access
interface FastEthernet3/48
ip address 192.168.2.2 255.255.255.252
interface Vlan1
no ip address
interface Vlan20
ip address PUBLIC_IP1 255.255.255.240
interface Vlan153
ip address PUBLIC_IP2 255.255.255.248
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.2.1
ip local policy route-map PUBLIC
access-list 100 permit ip ISP2_NETWORK 0.0.0.7 any
access-list 101 permit ip ISP1_NETWORK 0.0.0.15 any
route-map PUBLIC permit 10
match ip address 100
set ip default next-hop PUBLIC_GW2
route-map PUBLIC permit 20
match ip address 101
set ip default next-hop 192.168.2.1
Any ideas guys, I am at my wits end here ....
Thanks as always !Hi Oliver ,
Have you got IP Address assigned to your server from the same segment ?? like for server 1
ip address PUBLIC_IP1 255.255.255.240
and for server 2
ip address PUBLIC_IP2 255.255.255.248
What is the gateway IP address assigned for both servers .
HTH
Sandy -
Can not access Server admin site
I can not access http://MYSERVER1:50000 site. I get error "The page cannot be displayed. The page you are looking for is currently unavailable.".
But I was able to access even yesterday. Could you tell me any possible problems and how to fix the error?
Thanks!
MikeHi Mike
That means your J2EE engine is not running...
Restart the engine, also check that the DB is up and running.
Regards
Juan -
Can not access BIOS after update BIOS
Can not access BIOS after update X220 BIOS to version 1.19
Type: 4290-R32
BIOS: 1.19
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.txt
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/8duj09uc.iso
Ask google and try anyway but not work
- Press ThinkVantage, Press F1, Press Fn+F1
- Power off, unplug AC, unplug battery, wait 15 miniute, try all again
- Try to update BIOS againThat is really weird.
When you are in Windows, can you test and see if the F1 key is working? If it is working. Shut down the laptop then boot it back up. At the Thinkpad screen, keep spamming the F1 key and see if you are able to boot into BIOS.
//JameZ
Check out the Community Knowledge Base for hints and tips.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
X240 | 8GB RAM | 512GB Samsung SSD -
Can not access the Instance Data of a Singleton class from MBean
I am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
Can anyone explain or have hints on what's happening ? Any help will be appreciated.
I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
http://www.theserverside.com/discussions/thread.tss?thread_id=12194
http://www.jguru.com/faq/view.jsp?EID=1051835
Thanks,
KrishnaI am working against the deadline and i am sweating now. From past few days i have been working on a problem and now its the time to shout out.
I have an application (let's call it "APP") and i have a "PerformanceStatistics" MBean written for APP. I also have a Singleton Data class (let's call it "SDATA") which provides some data for the MBean to access and calculate some application runtime stuff. Thus during the application startup and then in the application lifecysle, i will be adding data to the SDATA instance.So, this SDATA instance always has the data.
Now, the problem is that i am not able to access any of the data or data structures from the PerformanceStatistics MBean. if i check the data structures when i am adding the data, all the structures contains data. But when i call this singleton instance from the MBean, am kind of having the empty data.
Can anyone explain or have hints on what's happening ? Any help will be appreciated.
I tried all sorts of DATA class being final and all methods being synchronized, static, ect.,, just to make sure. But no luck till now.
Another unfortunate thing is that, i some times get different "ServicePerformanceData " instances (i.e. when i print the ServicePerformanceData.getInstance() they are different at different times). Not sure whats happening. I am running this application in WebLogic server and using the JConsole.
Please see the detailed problem at @ http://stackoverflow.com/questions/1151117/can-not-access-the-instance-data-of-a-singleton-class-from-mbean
I see related problems but no real solutions. Appreciate if anyone can throw in ideas.
http://www.velocityreviews.com/forums/t135852-rmi-singletons-and-multiple-classloaders-in-weblogic.html
http://www.theserverside.com/discussions/thread.tss?thread_id=12194
http://www.jguru.com/faq/view.jsp?EID=1051835
Thanks,
Krishna -
I'm note a firefox geek, but ever since my friend told me to install NoScript I can not access my msn and hotmail page. It tells me that Java Script is required, what ever that is. What do I do next. Do I uninstall the No Script. Thanks Ed edit
DetailsYou are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
Can not access the media card files Blackberry 8310 - HELP
Can not access the media card files Blackberry 8310.
I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
Here are the messages:
“A media card has been inserted that contains encrypted content which will be unaccessible by this device”
I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
Media card support – ON
Encryption Mode: - Security Password & Device
Encrypt Media Files – YES
Mass Storage Mode Support – OFF
Please note – I can not change the encryption mode since it is set by policy
Security Options – General Settings – Content Protection – Disabled
The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
Unable to display file /media card/ pictures/ing000000xx.jpg.rem
Here is what I have tried (from the advice on this board):
1) Read the files directly off the media card – No good
2) Create a “new” folder on the media card and move a file into it then try to read it – No good
3) Email the file then read it – No good
4) Reset Encryption mode to off then try – Can’t do it – IT Policy setting
5) Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
Thanks for any help you can offer!Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
IrwinII
Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post. -
I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.
What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
Cheers, Tom -
I can not access my itunes library on Apple TV. How do I turn on home sharing?
I Can not access my itunes library on Apple TV. How do I turn on home sharing?
Happy to help you :) go to seeing and than general or settings than iTunes store it's for sure in settings but you may want to set it up on your computer in which case it's (windows) edit > preferences (Mac) iTunes preferences
Maybe you are looking for
-
im really frustrated. everything not just this happening to me right now. I'll try to be as clear as I can be here. I can't get email or send email with one of two apple I.D.'s connected to my iphone. The other I.D. I paid for extra storage. The
-
Advance payment Condition in PO
Dear all, Could any body say,is there any provision to mention Advance payment condition in Purchase Order.Please advise at the earliest possible.For suitable answer points would be assigned. Regards, NSB
-
Fax was working fine but since moved and reconnected won't work
Very annoyingly my fax was all working just fine till i moved house and on reconnecting it all up ( just the same as was before) the fax won't work, have a dial tone and phone working fine as is the scan and printer . When running the fax test it kee
-
I have around 1,000 photos on my old phone and I want to put them on my new phone without using a backup or iTunes, which would be the easiest way?
-
Rpckeyservbind failure at boottime
Following a clean installation of Solaris 7 (11/99) full distribution, I get a white screen error message at boot time "rpcbindkeyserv failed to generate host's netname when establishing root's key".. If I try keylogin at the command line, the error