Can not access my Time machine HD after CLEAN install Mountain Lion

Hi Everyone!
Thank you in advance for your interest and help, I really appreciate it.
I recently did a clean Install of Mountain Lion and already did all the updates that appeared. However, before doing these clean install, I did a back up with Time Machine on my external Hard drive. Now I can't access to it, doesn't even appear on my sidebar when I connect it. On the other hand it does appear as connected when I open Disk Utility, but I can not access to it. There I have all my 5 years of University works and classes, photos, and music. This Hard drive is only dedicated for my Mac Backups and nothing more.
I guess that if I install again Snow Leopard, it will work, but I have to re install everything as my Mac is a Mid or Late 2007 15-inch Macbook pro and it came with the OS before the snow leopard 10.5 or something like that.
What can I or should I do to access my Hard Drive again?
Best Regards
Edd

Hi Mende,
Sorry for my late reply but I want to thank you for your help.
I followed your instructions and now I can access the drive thank you a lot for this. However, now I don't want to restore everything from my last back-up just some files, How can I do this? Also I want to restore My iLife, but the copy I have from the CD that came with my mac doesn't allow to install it, what can I do.
Take good care, and happy holidays.
Best Regards
Edd
PD. Are you from Spain?

Similar Messages

  • Cannot Access Earlier Time Machine Backups After Upgrade To Mountain lion

    I went into Time Machine to recover some past emails. It shows that it had backed up my emails for the last year, however it will not let me recover anything before my upgrade to mountain lion. Does anyone know of a workaround for this problem. Thank you.

    Christopher Sant wrote:
    Once it does finally recognize (after a good while) it simply says "Error, time machine could not complete the backup"
    There should be more to that message.  See #C2 in Time Machine - Troubleshooting.  It will show you how to locate the message(s) that describe the problem, then help you fix it.    If that doesn't help, post back with details, including all the messages, your setup, what you've done, and the results.

  • I have my complete computer using Lion backed up on the time machine. Then I installed Mountain lion. I do not like it at all. Is there a way I can remove ML and put my old Lion system back pin my computer?

    I have my complete computer using Lion backed up on the time machine. Then I installed Mountain lion. I do not like it at all. Is there a way I can remove ML and put my old Lion system back pin my computer?

    If you have got a backup, press Command and R keys in boot and restore an old backup. You can install Snow Leopard and upgrade to Lion if you haven't got the backup

  • Time Machine problem after clean install

    I installed an SSD drive on my mac and did a clean install of OS X Lion.
    Now, when I access my time machine backup disk I can only restore applications and not any files.
    Is there anything I should do to be able to restore files etc.?

    Erase Lion from the hold commnad r boot into Recovery, then reinstall it again.
    Next when you setup Lion,  have teh TM drive connected and use Setup Assistant to transfer from TM drive.
    What I suspect happened is you have the same named account and it's conflicting.
    Most commonly used backup methods explained

  • Kernel panic after time machine migration after clean install of 107.3

    I had the hard drive replaced in in my mid 2009 17" MacBook pro. After the clean install of lion I migrated my data from time machine (lion) to the new clean partition.. Upon completion the machine is unresponsive. The progress wheel turning for 10 minutes. I force quit and restart to kernel panic. I have been through this 3 times same sequence of events same results. Any ideas?
    Thanks in advance,
    John

    See
    What is a kernel panic,
    Technical Note TN2063: Understanding and Debugging Kernel Panics,
    Mac OS X Kernel Panic FAQ,
    Resolving Kernel Panics, and
    Tutorial: Avoiding and eliminating Kernel panics for more details.

  • Imac keeps crashing in time machine backup after upgrade to mountain lion

    2008 imac kept crashing (shutdown and restart) during first backup after upgraded to mountain lion. The backup size was about 10GB but time machine crashed after a while (at most 2GB) and never completed backup. So, I don't have any backup since right before I upgraded from Lion. Any suggestion?

    Something strange happened. I was able to get time machine to work by going out to the login screen (the account kept logged in) and let it run the backup with the screen off (screen auto off after a few min). I tried it on two different external drives and that did the trick on both. Since the initial Mountain Lion backup was huge (155 GB), I was quite surprise that it worked at all. I assume your MBP was a Lion to ML. I also just did a 2012 MBP upgrade but that one was smoother. I did not recall having crashing issue. One thing I did find during this was that my WD passport USB drive was corrupted. Not sure it was the cause or not. I had to erase and reformat to get it back to work. Maybe do a verify disk to confirm. Good luck.

  • Time machine full after clean install of snow leopard

    I recently upgraded to Snow Leopard by doing a clean install. I just connected my external HD to backup Time Machine, and it's telling me the disk is full and there's not enough space to backup, even though it spent some time deleting files. I'm guessing that it's not deleting files from before I installed Snow Leopard? I'm not sure of the best way to manually clear the earlier backups. (in case it matters, my external HD is partitioned with Super Duper backups on one half, and TM on the other).
    I tried looking at the TM troubleshooting tips, but wasn't sure of the best way to deal with this - rather safe than sorry!
    Thanks for any advice.

    The "proper way" is while in time machine, go to the specific backup you want to delete. Then click the gear shape or the settings on the menu bar. There is an option "delete backup".
    When opening your time machine HD and open "Backups.backupdb" are there two machines appearing or just one? If there are two, go to the time machine icon in your doc and control click on the icon. Select the option "Browse Other Time Machine Disks" and select the older machine to access and/or delete backups.
    I believe at times I've also just deleted the specific backups when accessing the time machine HD in the finder.

  • I am not able to access old Time Machine backups after OS install.

    Hi,
    I recently did a fresh install of Mountain Lion.  The system was getting sluggish from garbage collection, so I wiped it clean and started from scratch.  Prior the install, I ran one last backup just in case.  I went to restore some of my apps, like iWork '09, and I could not find any backups prior to my install dates.  I can see the files when I open up my Time Capsule with Finder.  But I cannot restore them using Time Machine.
    I tried dragging the iWorks programs over to the Applications folder, but the applications crash (Pages 4.2, Numbers 5.2, and Keynote 2.2).  I then tried going into the App Store and reinstalling them from my Purchases list.  All of my store bought purchase are there, but the iWork ones.  Which is odd, because they were updated from the App Store program after I dragged them over.
    The iWork programs I need from the backup.  Everything else is backed up in iCloud, iTunes, and the App Store.  I really need to get Pages up and running again.  Does anyone know what to do?  All else is irrelevant.

    If you installed iWork apps from a DVD, you need to use that DVD and reinstall the apps. Then update iWork to current using Software Update. There are other components from the DVD that need to be installed. I tried the same thing once and realized I had to reinstall and not restore from a TM backup.
    If you purchased the iWork apps from the App Store, you should be able to redownload and install these again. If the download button is greyed out, make sure your TM back up and/or clone drive is unmounted. Otherwise, the App Store will see this and think the apps are already installed.

  • How can I access old Time Machine backups after restoring from Time Machine?

    Just restored my iMac and I can only see "Now" when I enter Time Machine. How can I see all the backups and dates I had before I restored?

    While in Time Machine, press the key combination shift-command-C. The front window will show all mounted volumes. All snapshots should now be accessible. Select the one you want and navigate to the files you want to restore.

  • Can you import photos from time machine backup after clean install

    I had to do a clean install of Mt. Lion.  So now I have all my photos on the time machine backup.  Is there a way to get those photos in to my library?

    When I go back to the backup it does not let me go back to the previous backupprobably because the last backup was Lion and I am on Mt. Lion now.  don't what to do another backup if that is going to mess up the old one.  I can access it though by just going to it.  So i am putting that one on my desktop and I am going to rename it and see if I can open in Iphoto.

  • Restore iBooks files from time machine backup after clean install

    I just did a clean install of Yosemite. I still have a Time Machine backup of my Mavericks install. iBooks in my new Yosemite install does not have all of my books and pdfs in it - just the ones I can download from the iBookstore.
    Is there an easy way to access my Mavericks Time Machine backup to retrieve my old iBooks files?

    When I go back to the backup it does not let me go back to the previous backupprobably because the last backup was Lion and I am on Mt. Lion now.  don't what to do another backup if that is going to mess up the old one.  I can access it though by just going to it.  So i am putting that one on my desktop and I am going to rename it and see if I can open in Iphoto.

  • Time machine restore after clean install

    I use a WD My Cloud drive 4 TB to make time machine backups of my Macbook Pro. I never partitioned this external drive but simply connected it as the backup disk for my time machine backups. I am on the latest software version of the Mac OS.
    As the disk on my Macbook pro was running out and my machine was becoming slow, I chose to wipe the disk clean by reformatting it. I did not want my entire time machine back up to be restored, I figured I will be picking and choosing the files I desired from the time machine and pulling them on my local disk as and when required
    I noticed recently that my newly formatted machine was also utilizing the same external disk as backup and it had started creating time machine backups - there isn't much data on my new machine as this has been only a few weeks old.
    When I click to enter the time machine, the last back up I can go back to is dated Dec 2014 which feels like it is the newly formatted disk's first back up and I cannot figure out how to get to my old backups. I see purely from the utilized capacity of my external disk that it has about 500 GB sitting on it which corresponds to the size of my original backup but I am not sure how to get to it.
    I don't recall ever selecting an option on overwriting the existing backup, so confused as to what I might be doing wrong
    I see some other posts on this topic but these people at least see their folders - I havent changed a version on my OS or my login id so this does not seem like a permission issue
    Appreciate your help on this issue

    You would use Migration Assistant to migrate the old "you" from your backup.
    If your issue was user specific all along, you may reintroduce the issue by migrating. If you fear it was user specific, you should log into Root and manually navigate into your backups.backupdb folder and find the desired apps, docs, music, movies, and pictures, and then copy them to the desired and respective locations of the volume, but you will have to address the permissions using "Apply to Enclosed Items" to make sure they will open, edit, and save correctly, depending on the contents that you bring over. Permissions can be a pain sometimes.

  • Using old Time Machine backup after clean install of system

    I had a system crash on my G4 iBook running Leopard. Based on advice given at the Apple store genius bar, I reinstalled Leopard from an install DVD, reformatting the drive. During the system installation process I used my Time Machine backup to reinstall the former users (but nothing else). I then installed my needed applications. So far so good.
    Now I'm in the situation where I have an external drive with the Time Machine backup of the pre-crash iBook, and I'm not sure how to proceed. Do I start over and do a new backup (effectively erasing all my pre-restore data)? Or can the old backup still be used, and added to? While losing the pre-restore time machine data would not be a major loss, it would be kind of nice to have.
    Any suggestions? Thanks!
    Dan

    DanK wrote:
    I had a system crash on my G4 iBook running Leopard. Based on advice given at the Apple store genius bar, I reinstalled Leopard from an install DVD, reformatting the drive. During the system installation process I used my Time Machine backup to reinstall the former users (but nothing else). I then installed my needed applications. So far so good.
    You didn't want any of your settings, preferences, data, etc.? The +MIgration Assistant+ app will let you do that, for one or more users. And of course, you can use the +Star Wars+ display to restore selected items.
    Now I'm in the situation where I have an external drive with the Time Machine backup of the pre-crash iBook, and I'm not sure how to proceed. Do I start over and do a new backup (effectively erasing all my pre-restore data)? Or can the old backup still be used, and added to? While losing the pre-restore time machine data would not be a major loss, it would be kind of nice to have.
    Your next backup will be a full one; everything on your internal HD is considered as changed, so will be backed-up again.
    If there's room for that, it will just be a large incremental backup, added to the existing ones.
    If not, Time Machine will begin deleting your oldest backups, one by one, trying to make enough room for the new backup (the amount on the internal HD plus 20% for workspace). But it won't delete the latest backup -- if that's the only one left, and there still isn't enough room, the backup will fail.
    If there is room, the first backup may appear to be very slow; why is not clear, but as long as it's making progress, let it run. Subsequent ones should be normal.

  • TS1338 time machine restore after clean install

    My MacPro 2 x 2.66 GHz Dual core Intel Xeon with 8 Gb RAM was having trouble booting and the drive was unable to be repaired 2x in 30 days, so I wiped the drive and did a clean install of Snow Leopard and brought everything back to date (10.6.8) cleanly.
    How do I get all my apps, preferences, keychain etc back from my most recent Time Machine backup? My user now is different, so Time Machine is giving me a hard time now that I am a new "me."
    Thanks!
    Artboard

    You would use Migration Assistant to migrate the old "you" from your backup.
    If your issue was user specific all along, you may reintroduce the issue by migrating. If you fear it was user specific, you should log into Root and manually navigate into your backups.backupdb folder and find the desired apps, docs, music, movies, and pictures, and then copy them to the desired and respective locations of the volume, but you will have to address the permissions using "Apply to Enclosed Items" to make sure they will open, edit, and save correctly, depending on the contents that you bring over. Permissions can be a pain sometimes.

  • Time Machine Backup after clean install?

    Hi,
    I just took the plunge and made a clean install of Mavericks on an SSD called "A". On this volume I only have the system and the applications. My User Account is on a separate volume "B" and my third volume is a 4TB volume "C" with my Time Machine backup. My volume "B" is backuped on the  TM volume "C".
    In the past I have had very nasty experiences with Time Machine, where a whole backup was deleted because Time Machine thought I was on a completely new computer. Now I don't want to repeat this experience, because when opened after the system install, TM didn't recognize neither volume "B" nor "C".
    Any ideas of how to make sure TM doesn't delete the old stuff? I don't want to try around and eventually lose everything.
    Thanks!

    Inherit a Backup
    Inherit a Backup (2)

Maybe you are looking for