Can not access my utilities set up

I bought an Airport Extreme base station and attempted to set it up. However, it failed to connect to the Internet. There might be an error on my part in the configurations. So, I am attempting to access the setup again in Airport Utility, but when I click on it, it automatically scans for a connection and keeps giving me the message that Airport Utility was unable to find an Apple wireless device.
The only option then is to rescan. How can I access the setup again so I can change the configurations? I also tried resetting the base station, but that did not help either.

Hello Skevy. Welcome to the Apple Discussions!
Try connecting your MacBook Pro directly, using an Ethernet cable, to one of the 802.11n AirPort Extreme Base Station's (AEBSn) LAN ports, and then, try using the AirPort Utility to configure it.

Similar Messages

  • Someone hacked my computer and set up a new administrative account by re-registering my computer. I can not access this account nor delete it. How can I fix this and get my computer back to the way it was?

    Someone hacked my computer and set up a new administrative account by re-registering my computer. I can not access this account nor delete it. How can I fix this and get my computer back to the way it was? And also prevent this from being able to happen again. I have the link the kid used (http://www.ihackintosh.com/2009/05/how-to-hack-the-user-password-in-mac-os-x-wit hout-an-os-x-cd/) Apparently he used hack 2. HELP PLEASE!

    Not sure why you can't delete that account. If you have admin privileges, you should be able to. Sounds like you only removed the Home Folder for that account.
    You should highlight/select the account you want to remove and then click the minus button. Might need to unlock the padlock with your admin password.
    Have a look at these articles from Apple, if necessary.
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8235.html
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8162.html
    http://support.apple.com/kb/DL1399

  • Can not access sample & admin tools after configuring Oracle8.1.7

    Hi all,
    I am using WLS6.1(sp2) and WLPortal4.0(sp1).
    I changed the default database(i.e. Cloudscape) to Oracle by following the doc
    http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
    But, after setting up the Oracle8.1.7, when i try to access the sample stock portal
    from the homepage, i am getting the following exception
    PortalPersistenceManager: portal 'portal/stockportal' not found
    <Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP> <[WebAppServletContext(1467076,stockportal,/stockportal)]
    Servlet failed with S
    ervletException
    javax.servlet.ServletException: Received a null Portal object from the PortalManager.
    at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalRequest(PortalWebflowServlet.java:194)
    at com.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWebflowServlet.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
    at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    even i can not access the admin tools.....i get the follwing error when i try
    to access the portalTools/index.jsp
    <Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could not resolve
    a destination given: appname [tools], namespace
    [admin_main], origin [begin], event [defaultEvent] with request id [3121877];
    Attempting to load Configuration-error-page.>
    <Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsing uri /portalTools/application,
    path null, query string n
    amespace=admin_main - Webflow XML does not exist, is not loaded properly, or you
    do not have a configuration-error-page defin
    ed.
    Exception[com.bea.p13n.appflow.exception.ConfigurationException: The configuration-error-page
    node was not found in the webfl
    ow xml file. for webapp [tools], namespace [admin_main]. While trying to display
    CONFIGURATION ERROR: [Exception[com.bea.p13n
    .appflow.exception.ConfigurationException: Bad Namespace - namespace [admin_main]
    is not available for webflow execution. Mak
    e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
    at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurationError(WebflowExecutorImpl.java:786)
    at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:484)
    at com.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequest(WebflowExecutorImpl.java:419)
    at com.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowServlet.java:132)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:241)
    at weblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:265)
    at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:200)
    at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:2495)
    at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    Am i missing any step here???
    can anybody help me????
    thanks
    Vijay

    oops...i missed step5.
    it is working now after doing the sync.
    thanks
    Vijay
    "Daniel Selman" <[email protected]> wrote:
    Did you sync the applications and load the sample data?
    Sincerely,
    Daniel Selman
    "vijay bujula" <[email protected]> wrote in message
    news:[email protected]...
    Hi all,
    I am using WLS6.1(sp2) and WLPortal4.0(sp1).
    I changed the default database(i.e. Cloudscape) to Oracle by followingthe
    doc
    http://edocs.bea.com/wlp/docs40/deploygd/oraclnew.htm
    But, after setting up the Oracle8.1.7, when i try to access the samplestock portal
    from the homepage, i am getting the following exception
    PortalPersistenceManager: portal 'portal/stockportal' not found
    <Feb 20, 2002 12:33:19 PM EST> <Error> <HTTP><[WebAppServletContext(1467076,stockportal,/stockportal)]
    Servlet failed with S
    ervletException
    javax.servlet.ServletException: Received a null Portal object fromthe
    PortalManager.
    atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.setupPortalReq
    uest(PortalWebflowServlet.java:194)
    atcom.bea.portal.appflow.servlets.internal.PortalWebflowServlet.doGet(PortalWe
    bflowServlet.java:99)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
    l.java:241)
    atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2495)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    even i can not access the admin tools.....i get the follwing errorwhen i
    try
    to access the portalTools/index.jsp
    <Feb 20, 2002 12:38:18 PM EST> <Warning> <Webflow> <Webflow could notresolve
    a destination given: appname [tools], namespace
    [admin_main], origin [begin], event [defaultEvent] with request id[3121877];
    Attempting to load Configuration-error-page.>
    <Feb 20, 2002 12:38:18 PM EST> <Error> <Webflow> <Error while parsinguri
    /portalTools/application,
    path null, query string n
    amespace=admin_main - Webflow XML does not exist, is not loaded properly,or you
    do not have a configuration-error-page defin
    ed.
    Exception[com.bea.p13n.appflow.exception.ConfigurationException: The
    configuration-error-page>> node was not found in the webfl>> ow xml file. for webapp [tools, namespace [admin_main]. While tryingto
    display
    CONFIGURATION ERROR: [Exception[com.bea.p13n
    appflow.exception.ConfigurationException: Bad Namespace - namespace[admin_main]
    is not available for webflow execution. Mak
    e sure the [admin_main.wf] file is deployed in webapp [tools].]],]
    atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processConfigurati
    onError(WebflowExecutorImpl.java:786)
    atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
    est(WebflowExecutorImpl.java:484)
    atcom.bea.p13n.appflow.webflow.internal.WebflowExecutorImpl.processWebflowRequ
    est(WebflowExecutorImpl.java:419)
    atcom.bea.p13n.appflow.webflow.servlets.internal.WebflowServlet.doGet(WebflowS
    ervlet.java:132)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.RequestDispatcherImpl.forward(RequestDispatcherImp
    l.java:241)
    atweblogic.servlet.jsp.PageContextImpl.forward(PageContextImpl.java:112)
    at jsp_servlet.__index._jspService(__index.java:92)
    at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :265)
    atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
    :200)
    atweblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletCo
    ntext.java:2495)
    atweblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java
    :2204)
    at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
    at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
    >
    Am i missing any step here???
    can anybody help me????
    thanks
    Vijay

  • Can not access server's on public ip's

    Guys,
    We have a core switch with two fibre lines connecting us through two different ISP's to the internet. These ISP's have provided us with a range of public ip's each. We have a few routers on some of these ip's and they are working fine and we can access them externally (telnet and ssh).
    I am now busy setting up two servers, one on each ISP with their respective public ip's. I can ping the core switch and the isp gateways from the servers and from the core. I have triple checked that there are no active firewalls and I can see that the http ports are open and accessible (TcpView). But for the life of me I can not access those servers externally. I am now completely stumped. I do suspect though that it is a routing problem through the core.
    And herewith the relevant parts from my Core switch's config:
    version 12.2
    service tcp-keepalives-in
    service tcp-keepalives-out
    hostname SMS-CORE
    no aaa new-model
    clock timezone ZAR 2
    no ip source-route
    mls netflow interface
    mls cef error action reset
    spanning-tree mode pvst
    spanning-tree portfast edge default
    vlan internal allocation policy ascending
    interface FastEthernet3/25
     switchport
     switchport access vlan 153
     switchport mode access
    interface FastEthernet3/31
     switchport
     switchport access vlan 153
     switchport mode access
    interface FastEthernet3/35
     switchport
     switchport access vlan 153
     switchport mode access
    interface FastEthernet3/37
     switchport
     switchport access vlan 20
     switchport mode access
    interface FastEthernet3/47
     switchport
     switchport access vlan 20
     switchport mode access
    interface FastEthernet3/48
     ip address 192.168.2.2 255.255.255.252
    interface Vlan1
     no ip address
    interface Vlan20
     ip address PUBLIC_IP1 255.255.255.240
    interface Vlan153
     ip address PUBLIC_IP2 255.255.255.248
    ip classless
    ip route 0.0.0.0 0.0.0.0 192.168.2.1
    ip local policy route-map PUBLIC
    access-list 100 permit ip ISP2_NETWORK 0.0.0.7 any
    access-list 101 permit ip ISP1_NETWORK 0.0.0.15 any
    route-map PUBLIC permit 10
     match ip address 100
     set ip default next-hop PUBLIC_GW2
    route-map PUBLIC permit 20
     match ip address 101
     set ip default next-hop 192.168.2.1
    Any  ideas guys, I am at my wits end here ....
    Thanks as always !

    Hi Oliver , 
           Have you got IP Address assigned to your server from the same segment ?? like for server 1 
    ip address PUBLIC_IP1 255.255.255.240
    and for server 2 
    ip address PUBLIC_IP2 255.255.255.248
    What is the gateway IP address assigned for both servers .
    HTH
    Sandy

  • Can not access the media card files Blackberry 8310 - HELP

    Can not access the media card files Blackberry 8310.
     I had a battery drain problem. The unit would only last 16 hours before completely drained. Purchased a new battery with the same result. I figured that I should try a complete reset so I did a hard wipe. Once that was done and I loaded the unit back up and returned online, the battery drain problem was resolved but now I can not access the media card.
     Here are the messages:
     “A media card has been inserted that contains encrypted content which will be unaccessible by this device”
     I can see the files. I have transferred them to my PC via the SD card but I can not open them. Here are the settings:
     Media card support – ON
    Encryption Mode: - Security Password & Device
    Encrypt Media Files – YES
    Mass Storage Mode Support – OFF
     Please note – I can not change the encryption mode since it is set by policy
     Security Options – General Settings – Content Protection – Disabled
     The version of Desktop Manage I am using is 4.2.1.8. When I try to use the Media Manager to move the files, I get an error message and can’t move the file. If I access the file on the card and try to display it, I get:
     Unable to display file /media card/ pictures/ing000000xx.jpg.rem
     Here is what I have tried (from the advice on this board):
     1)     Read the files directly off the media card – No good
    2)     Create a “new” folder on the media card and move a file into it then try to read it – No good
    3)     Email the file then read it – No good
    4)     Reset Encryption mode to off then try – Can’t do it – IT Policy setting
    5)     Be sure that the password was set the same as before the wipe (setting is password & device) – Can’t do it – The Blackberry prevents me from using an old password.
     So I think I can’t read the files because I can’t replicate the encryption key. Could that be right? My problem is that I do not understand why this would be the case. It is still the same device and since it knows what the old password was (because it would prevent me from using it again), why would it not generate a key to access the files?
     All I am trying to get off the card are pictures on my 6 year old … some are priceless. Can someone help me do this? One would think that this should not be this hard but from all the postings I have found, it seems that it is. And yes, shame on me for not moving the files before I did the reset (THAT will never happen again!) but this being unrecoverable is unconscionable given how many seem to find themselves in this situation.
     Thanks for any help you can offer!

    Not sure why you couldn't see them using mass storage mode. Did you have the pics stored on your media card? Try going to media-menu-explore-media card-blackberry-pictures See what the extension is on your pics. If any have the extension such as .jpg.rem they are encrypted.
    IrwinII
    Please remember to "Accept as Solution" the post which solved your thread. If I or someone else have helped you, please tell us you "Like" what we had to say at the bottom right of the post.

  • I can not access my itunes library on Apple TV. How do I turn on home sharing?

    I Can not access my itunes library on Apple TV. How do I turn on home sharing?

    Happy to help you :) go to seeing and than general or settings than iTunes store it's for sure in settings but you may want to set it up on your computer in which case it's (windows) edit > preferences (Mac) iTunes preferences

  • My old appleID use email with domain already deactivate. So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    My old email that using register for apple ID cannot access/check any mail because that domain already deactivate.
    So I changed my appleID and primary email and now I can not access iCloud with iOS7. ICloud shows my old appleID but I can't change it. How do I get iCloud to work with my updated ID?

    Hi ccharat,
    Welcome to the Apple Support Communities! It sounds like you did a good job editing your Apple ID and primary email address, but you didn’t sign out of iCloud on your iOS device before hand. What you may need to do in this situation is go back to the Apple ID website and edit your Apple ID and primary email address back to the email address that is signed in with iCloud (there is no need to verify the account after editing it back to the old account, just changing it back is enough). Once your Apple ID is back to the original account, delete the iCloud account from the iOS device and be sure to keep all info on the device when prompted. After you delete the iCloud account, go back to the website and edit your Apple ID and primary email address back to the new address. Once it is back to the account you would like, you can sign into the iCloud on the iOS device with that new account and merge all of the data when prompted. Please use the following article as a reference.
    iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
    http://support.apple.com/kb/ts5223
    Change your Apple ID temporarily
    If signing out and back in to iMessage or FaceTime didn't help, try these steps:
    Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
    Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
    Scroll down and tap Delete Account, then tap Delete to confirm.
    Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
    Enter the password for your previous Apple ID.
    Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
    Return to Settings > iCloud and sign in with your new Apple ID.
    I hope this helps,  
    -Joe

  • I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

    Hi to the Mac Folks,
    I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
    I primarily print photos from Photoshop CS5.  The term Page Set-up has gone missing in the file pull down menu. Can't make any choices  There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
    Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
    Preview has no "Page Setup" - or does it?
    Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
    Woody

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • I have a consultation with you. Because my sister is updating the IOS8 Iphone 4S. Then was not able to use it. Random screen freezes apple.So bring your instruments to Restore Center. Machine can use it. But can not access .

      Dear Staff
        I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page that actually works. Because of the problems with ID of icloud.
    She forgot the ID of the user and that of the other. I caught only a password is *******. I would like to ask for technical assistance. What should I do to get back to work normally. Or you can reset the ID and password or not., And set to work. If you do not have an iPhone, this airplane. It becomes a good paperweight itself.Hope you will understand. Buying splash, it is not easy because it's expensive.Learn to understand and to help.
    Highly respected
    Sarawut
    My email: ********
    <Personal Information Edited By Host>

    It is locked to your sisters carrier.
    She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

  • Oracle BI Publisher - can not access Shared Folder , using Oracle BI Server

    Hi there,
    We have an installed OBIEE and BIP (BI Publisher) system which is the security setting of BIP using "Oracle BI Server".
    Our OBIEE security is using the combination of LDAP (authentication) and Relational Table (for grouping user privillege)
    The integration connection between OBIEE and BIP is successfull, and I can connect using Administrator to the BIP
    But when I assign a general user using group : XMLP_Admin (define in rpd file and relational table), the user can log in to BIP, but can NOT access the Shared Folder.
    the error desc : "Error 500: SRVE0199E: OutputStream already obtained"
    Anyone can help ?
    Thanks a lot
    -toni

    Did you define Roles and Permissions to the shared folder from BIP Admin?
    -Prakash

  • Oracle 9,2.0 32 bit for Solaris can not access more than 4GB?

    I am sorry to ask rather stupid question.
    I joined company which has big SUN Fire running Solaris 9 64bit version.
    It has system memory 16GB and 8 CPUs.
    I found 8GB memory reported as free. It is production box. It is heavy loaded.
    I guess Kernel parameter settings for Oracle set too low.
    I reported DBA and asked DBA to improve.
    My DBA said Oracle 32 bit version was installed and Oracle 32bit can't access more than 4GB system memory.
    Is it true that Oracle 9.2.0 32bit for Solaris can not access more than 4GB memory?
    32bit CPU and 32bit OS might have problem in access big memory.
    But I never heard Oracle 9 running on 64bit Solaris box can not access more than 4GB.
    Specially on Sparc 64bit chip and Solaris 9 64bit version.
    I searched forums and could not find good answer. I believe it is rather obvious.
    Please help me on this. I will be greatly appreciated.
    Thanks in advance.
    Message was edited by:
    user524303

    I was really surprised by the fact that almighty
    ORACLE can not access 4GB memory.
    So, it is true that 32bit Oracle is limited by 4GB RAM.Nope. 32bit almighty anything is limited to (max) 2^32 virtual adresses on a vmm system.
    Often there is also some split where memory is divided into system and user areas, where user (program) has e.g. 2 or 3GB. All this works regardless of amount of RAM available 0.5 or 512GB.
    Perhaps this link provides some useful info/background.

  • After install Crystal Report Server 2011, can not access control tools

    Afte install Crystal Report Server 2011, can not access control tools from web or from application.
    My server OS is Windows 2008 R2 SP1. I follow the default setting. How to fix it?
    Error message is above.

    Is Tomcat started?  On your Start menu you should have an option to get to "Tomcat  Configuration" or, under the CRS menu you can run the "Central Configuration Manager" to start Tomcat.
    What URL are you using to connect to the web app?  By default Tomcat runs on port 8080 so your URL should look something like this:  "http://<servername>:8080/BOE/CMC" or "http://<servername>:8080/BOE/BI".
    If Tomcat is running and you're trying to access it from another computer, check to see if the Windows Firewall is turned on for the server - if it is, turn it off for "Domain" access.
    If Tomcat won't start, go to the folder where Tomcat is installed and then look in the "logs" folder.  There should be a file called "stderr.log" which you can open in Notepad to see what types of errors might be occurring (you can ignore any errors having to do with "persisted sessions".)  If there are other errors, post in the BI Platform space to get assistance.
    -Dell

  • After install Crystal Report Server 2011, can not access control tool

    After install Crystal Report Server 2011, can not access cntrol tool from web or from application. My server OS is Windows 2008 R2 SP1. I follow the fedault setting. How to fix it?
    Error message:

    Seems like webapps are corrupted, Just redeploy the webapps.
    refer the below thread to do the same.
    http://scn.sap.com/thread/3400477

  • EA4500 - can only access youtube, google at a very slow speed, can not access anyother website

    Got a new EA4500 for X'mas
    After setting up the new router I could only access youtube and google at a very slow speed, however I can not access anyother website - facebook, yahoo and etc...
    it would ping yahoo and google no problem
    friend told me to do a tracert some ip address and his conclusion was the router is fully functional
    ISP uses PPPoE, Im sure that the username and password are correct. 
    upgraded to the latest firmware manually, and holy hell accessing the router with no internet access is a pain in the **bleep**! 
    Please help and Merry X'mas

    tonup80 wrote:
    I've made sure that both the EA4500 setting were the same as the WRT54G, did not solve the problem. 
    IP Address behind WRT54G is 192.168.1.103
    behind modem is 202.151.XX.XX
    It might be a DNS problem. Release & renew ip on the status page of your router. Just make sure you are already using the latest Linksys smart wifi firmware, reset the router & reconfigure. You can download the firmware here http://homesupport.cisco.com/en-us/support/routers/EA4500.

  • I recently got an apple computer at work and downloaded my Juno email on it. Now, I can not access all my past email in my juno inbox from other computers. Pls help.

    I recently got an apple computer at work and downloaded my Juno email on it. Now, I can not access all my past email in my juno inbox from other computers. Pls help.

    If it's a POP account and you set it up in Mail with the option to delete read messages from the server, then you can indeed no longer read it on the server. You may be able to restore the messages to the server if you also have IMAP access. Ask your mail service provider whether it's possible.

Maybe you are looking for