Can not access router page for WRT54GS

I can not tell what version my router is because it does not say on the bottom. everything is connected properly. coaxial is inserted into the modem, and when i connected the ethernet cable from the modem to my computer i get internet. Fine..dandy. now when i install that same wire to the INTERNET port on the router, and HARDWIRE to ANY of the ports to the router it works...cool! NOW when i try to access 192.168.1.1 NOTHING. it times out. so my ipaddress before and after holding the reset power for 30 seconds, and after power cycling (power down computer, than power down router, than power modem....than power up modem, wait till all lights come on...turn on router..all lights are on, and flashing(Internet, 1, and Power) EXCEPT the DMZ and WLAN lights on the router are off my ipaddress is 68.196.15.56, and my default gateway is 68.196.0.1. When i try to connect to 68.196.0.1 which is the default gateway i still get nothing. my cable modem is a scientific atlanta POS cisco product. I even double, and triple checked my tcp/ip connection under the general tab, and set them both to "obtain an ip address automatically", and the "obtain DNS server address automatically". Was so even crazy to empty internet cache, cookies, and temp files. I use both IE and Mozilla with ALL firewall (McAfee HIPS, and the antivirus turned off). I'm at a lost...if anyone has anything or any ideas, i downloaded the software for the router, and when i go to install it i get this error "Please check the tutorial to set your computer to DHCP". no clue guys i'm a pretty pathetic tech guy if you ask me. so i leave it to ya'll

ensure that you have the following connections done
1)connect the modem to the router's internet port
2)connect the computer to the router's port#1
3)there should not be any usb cable connected between the modem and the computer
if all of the above is fine
1)make sure that the computer gets an ip add of 192.168.1.x and the default gateway is 192.168.1.1
2)if yes , access the router using http://192.168.1.1 . the default password is admin

Similar Messages

Can not access OAF pages on R12.2

Hi All,
We installed R12.2 with the beta patch for doing some investigation before it is formal released. After we patched add-on products successfully, we found we can not use all OAF pages of those products on R12.2 by following error message:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
oracle.apps.fnd.framework.OAException: Could not load application module 'oracle.apps.XXX.XXXAM'.
## Detail 0 ##
JBO-30003: The application pool (XXX.cn.oracle.comVIS641521oracle.apps.XXX.XXXAM) failed to checkout an application module due to the following exception:
oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.NoDefException, msg=JBO-25002: Definition oracle.apps.XXX.XXXAM of type ApplicationModule not found
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In the $COMMON_TOP/java/classes, both the XXXAM.xml and XXXAMImpl.class are there. Also the $COMMON_TOP/java/classes has already been included in $CLASSPATH.
BTW. The standard OAF pages are working fine one R12.2, the error just happen on our add-on OAF pages(those pages are working fine on R12.1.3)
I knew the change from R12.1.3 to R12.2 includes using Weblogic, is it the problem?
Thanks,
Xiaofeng

Hi Krish,
Thanks for your help.
I have done following steps according to your suggestion.
1. CHMOD 777 to all add-on java class files and xml files
2. Clear cache in functional administrator responsibility
3. Bounce the APP tier by adstpall.sh & adstrtal.sh
But it doesn't work.
I noticed that the weblogic will deploy some war&jar files when restarting the oacore_server & oafm_server & forms_server, I don't remember if it is the same on R12.1.3.
Is it may be the reason?
Thanks&Regards,
Xiaofeng
Edited by: user12433549 on May 8, 2012 8:42 PM

Can't Access Setup Menu For WRT54G

I am having problems accessing my wrt54g's setup menu. I went to the cammand prompt and it said the ip address was 192.168.1.1, but when I go into IE and type that in, it doesn't connect. I have accessed it before but it's not working now. Any suggestions?

try this:
click on <tools>, go to <internet options>, go to <security tab> click on <curtom level button>, scroll down and at the very bottom make sure that "automatic log-on with curent username and password" is selected... click ok and try opening http://192.168.1.1 again in the browser's adress bar.. if not, go to RUN, type in the open field http://192.168.1.1 ,click ok and that should do it...
"a helping hand in a community makes the world a universe"

I have a consultation with you. Because my sister is updating the IOS8 Iphone 4S. Then was not able to use it. Random screen freezes apple.So bring your instruments to Restore Center. Machine can use it. But can not access .

Dear Staff
I have a consultation with you. Because my sister is updating the IOS8 I phone 4S. Then was not able to use it. Random screen freezes apple. So bring your instruments to Restore Center. Machine can use it. But can not access the page that actually works. Because of the problems with ID of icloud.
She forgot the ID of the user and that of the other. I caught only a password is *******. I would like to ask for technical assistance. What should I do to get back to work normally. Or you can reset the ID and password or not., And set to work. If you do not have an iPhone, this airplane. It becomes a good paperweight itself.Hope you will understand. Buying splash, it is not easy because it's expensive.Learn to understand and to help.
Highly respected
Sarawut
My email: ********
<Personal Information Edited By Host>

It is locked to your sisters carrier.
She would have to ask her carrier if they unlock iPhones and if she qualifies for this service.

Safari can not access any secure (HTTPS) web pages

Does anyone have an idea why a good frined of mine using Safari 1.3.2 on a Power Book G4 with Mac OS 10.3.9 can not access any secure web pages (those that start with HTTPS)? I can not find any preferences that might control this. She can access the pages with IE but not Safari. What setting on her computer might control this? Any ideas would be appreciated. I even through away (com.apple.Safari.plist) file. Not change. An ideas??

I have the same problem! However, this is ONLY while running wireless internet. Anytime I want to use an HTTPS site, I have to plug directly into my router, so I'm not wireless anymore, and then it works fine. Every now and then (like maybe 5% of the time), I get lucky and it will work for a short while such as logging into yahoo mail for example (logging into here didn't work at first but after waiting a bit, i was able to log in), but trying to stay on a secure connection such as a bank accnt. is impossible.
Any help would be GREATLY appreciated! Everyone I've asked says they've never had the problem. I thought I was the only one.
I checked my proxy settings -- nothing is checked. I've tried deleting preferences and I reset safari often.

I'm note a firefox geek, but ever since my friend told me to install NoScript I can not access my msn and hotmail page. It tells me that Java Script is required, what ever that is. What do I do next. Do I uninstall the No Script. Thanks Ed

I'm note a firefox geek, but ever since my friend told me to install NoScript I can not access my msn and hotmail page. It tells me that Java Script is required, what ever that is. What do I do next. Do I uninstall the No Script. Thanks Ed edit
Details

You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface

Can not access to OCA User Pages

Hello, I am following the OBE for External Authentication Pluggin Configuration, and The guide said i should go url:
https://host.domain:4400/oca/user
I changed according the host and domain for the infrastructure server, but when I try the resul is CONNECTION REFUSED. How I know if this port is the one listening for thsi page in my configuration?
I did also:
$ORACLE_HOME/oca/bin/ocactl start
and the result was OK.
Somebody know why I can not access thhis URL?
Thanks,

Did you verify that OCA is running on port 4400? Check your $OH/install/portlist.ini file for details.
regards,
--Olaf

IPhone 5s can connect to wireless WIFI router but can not access internet.

iPhone 5s can connect to wireless WIFI router but can not access internet at work. The admin says the router lets my iPhone connect to LAN, but the iPhone does not have server IP to access the internet. I entered the server IP and port number in the HTTP PROXY fields but I still can not access the web. Any ideas?
TIA
Rich

You IT person should be able to sort this out. But, they seems to be too busy or disinterested to do this. Suggest you provide the it person with an iPhone to get interested.
Any could be lots of things.
The best you can do is to get access to the admin setup for networking on a pc? The internet settings are all the same. Only what names the manufactures change from OS to OS. Check and compare parameters.
Phone works to internet at home, I assume?

TS3798 I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.

amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive

Can not access email addresses when they are a link. F/F goes nuts and "untitleed " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down thwe computer.

Can not access email addresses when they are a link. F/F goes nuts and "untitled " keep flashing across the top of the screen.I have to get out of that page fast or manually shut down the computer

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

After I updated the iOS version on 11/23/13, I can not access anymore my Pages. It says it's updating. How long would this take to update?

After I updated the iOS version on 11/23/13, I can not access anymore my Pages documents. It says it's updating. How long would this take to update?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
 Cheers, Tom

DESPERATE FOR HELP since downloading a separate outlook (from fast hosts) as addition to office mac 11 I can no longer access any Microsoft aps or documents including outlook - error messages 'can not change to identity for outlook'

I had office 2011 installed on my computer without outlook - been working fine.
I was given a trial of outlook decided against it at time due to cost - however my server provider fasthost have been offering outlook for free with a busines mail package. Trying to install it wouldn't due to the trail versions - so they gave me a step by step guide to remove outlook files.
Once i completed this the new outlook worked fine for 24 hours - however then we noticed all of our office programmes had been removed aka can not access any data and we are a management consultancy. Then fasthost recommended we reinstall out orginal office CD which I did and then all of sudden when download was completed everything now is inaccessable.
When I open outlook the message relays ' can not change to that idenity' I have tried to set up a new idenity and change permissions and even rebuilding it as per on line guides but when rebuilding it fails at the first step
Rest of office IE WORD, EXCEL I just get microsforft has encountered a problem and needs to close unexpectidly everytime I try and click into it.
I am now despirate as this is the second day we have had no access to anything and 6 day we have had no access to our documents \
FASTSHOST do everything via email and no incoming phone line (which they will give anyway) so I really need help
Any options advice greatly recieved
I am also using the most recent software and have been doing regular software updates OS X Lion.

I, too am wondering if it's the download site. I am not aware of any way to download Outlook Mac 2011 alone from any site including Microsoft's.
It is common for unscrupulous sites to offer desirable but pirated software for a modest price, but serve it up with a dose malware. They get you money, possible a credit card number, your e-mail, your IP address, and all you get is pain.
There was an "Outlook Express" for Mac that was freely distrubuted but I'll pretty sure that it never ran natively under OSX. The first OSX native version fo Office:Mac was Office X, and it introduced Entourage as the Mac mail client.
IF Fast Hosts is your ISP, I'd certainly talk to them to figure out what you downloaded.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

My BB9810 refuse to load OS7.1 software on my phone after the download has completed. My phone has freezed/stucked since morning. Pls urgent help/assistant needed as I can not access/use my phone for over 24hrs now.

Hi there,
Use the method described in the link below to get back up and running:
http://supportforums.blackberry.com/t5/Device-software-for-BlackBerry/How-To-Reload-Your-Operating-S...
I hope this info helps!
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Oracle 9,2.0 32 bit for Solaris can not access more than 4GB?

I am sorry to ask rather stupid question.
I joined company which has big SUN Fire running Solaris 9 64bit version.
It has system memory 16GB and 8 CPUs.
I found 8GB memory reported as free. It is production box. It is heavy loaded.
I guess Kernel parameter settings for Oracle set too low.
I reported DBA and asked DBA to improve.
My DBA said Oracle 32 bit version was installed and Oracle 32bit can't access more than 4GB system memory.
Is it true that Oracle 9.2.0 32bit for Solaris can not access more than 4GB memory?
32bit CPU and 32bit OS might have problem in access big memory.
But I never heard Oracle 9 running on 64bit Solaris box can not access more than 4GB.
Specially on Sparc 64bit chip and Solaris 9 64bit version.
I searched forums and could not find good answer. I believe it is rather obvious.
Please help me on this. I will be greatly appreciated.
Thanks in advance.
Message was edited by:
user524303

I was really surprised by the fact that almighty
ORACLE can not access 4GB memory.
So, it is true that 32bit Oracle is limited by 4GB RAM.Nope. 32bit almighty anything is limited to (max) 2^32 virtual adresses on a vmm system.
Often there is also some split where memory is divided into system and user areas, where user (program) has e.g. 2 or 3GB. All this works regardless of amount of RAM available 0.5 or 512GB.
Perhaps this link provides some useful info/background.

Can not access router page for WRT54GS

Similar Messages

Maybe you are looking for