Can not acquire licence N95 8G

So I recently bought a N95 8G that has 12 free months access to the music store, most works well, but I have downloaded a 3-4 albums that when I try to transfer from my pc to phone, it comes up with [b]This track could not be transfered as it was not possible to acquire a licence for this purpose[/b]
Can anyone tell me why it can not acquire a licence for a song I already have?
Cheers

The licence should have been downloaded BEFORE the track, perhaps something went wrong in that process - does the track play OK in the PC?
If this is not the case, and if you have a good data plan or WLAN access, you can download the track straight to the phone - go to the Music menu and select Music store, log into your account using your normal name and password, then go to the Music Vault which shows you the stuff you've already taken and redownload it directly to the phone.

Similar Messages

I can not update my N95 using Nokia Software Updat...

I can not update my N95 using Nokia Software Updater.
The error message "unable to update the software" will appear.
I have version 12.0.013.
Come with ideas, I have contacted Nokia's support and they want me to send the phone to them but it may be the final solution.

This page might answer your question:
http://linux.sgms-centre.com/nokiafaq/branded-phones/
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Scxi 1112 can not acquire correct data at high temperature(higher than 700C)

A scxi-1112 module in scxi-1001 chassis is used to acquire oven Temperature. Software is LabView 8.5. when oven is ramping higher than 700C, the module gets wrong data, the data acquisition VI shows random values around 700C.It seems the scxi-1112 module "reaches" its maximum setting, which actually is 1000C. Can Anybody explain what's happening to me? Thanks.

Hi gq,
Could you please provide a screenshot of the
way you are configuring the task, as well as what the data looks like
that you are seeing when it behaves incorrectly? If you just perform a
voltage reading (instead of a temperature task), what values are
returned, and does it show the same behavior of reaching a certain
voltage and not ramping any higher? Also, how do you have your
thermocouple attached to your oven; is there any possibility that the
connection is conducting at that temperature? Also, regarding the use of different measurements in the task, are you using different modules in your system or are the measurements being done on the same 1112 module? Additionally, have you tried other channels and received the same problem? I look forward to reading your response.
Regards,
Daniel S.
National Instruments

CAN NOT UPDATE A N95 14.0.001

Hy , i have a T-Mobile N95 V14.0.001 and you have for this model lunched out V21.0.016 . Why does nokia firmware update says that i have the latest firmware installed ? i really want someone to solv this issue !
i'v been waiting a firmware update for like 4 moths now and nobody is doing a thing ! And i am not the only one with this problem ! I must urge you to take my problem into consideration and do something with it !
Solved!
Go to Solution.

As others have pointed out, this is a problem with T-Mobile. It is up to them to release an update but they'll only do so when they're good and ready, if at all.
http://linux.sgms-centre.com/nokiafaq/branded-phones/
You might also want to read this post which goes into some detail regarding the pros and cons of getting a network-branded phone as opposed to a SIM-free phone:
/discussions/board/message?board.id=topfaq&thread.id=114
Message Edited by grschinon on 05-Feb-2009 09:52 AM
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

I Have 15 inch G4 that can not acquire wireless net work, I can see other wireless but failes to connect

The air port is on and it is asking to join the network that is available, I type in the passcode and every time it comes back connection failed.
I havr trird the same set up on manyn other of my apple devices, ( Ipad, Iphone 4 & 4S, Mac book pro 15" & 13" they all work fine with the same passcode)
I cant figure out why this power book is failing to connect to the wifi and or ethernet connection. I also tried to connect to a hard wire conection LAN and it still stated that it was not connected to the ethertnet.
please help

Since it doesn't connect via wifi or ethernet, something is not setup correctly. Don't know if Safari in OS 10.5 works the same as Safari in OS 10.4, but open Safari. When Safari doesn't connect to the internet, you should get a message that will walk you thru the setup. Do this first when connected via ethernet.
 Cheers, Tom

7.01 tryout. can not add licence

Hi i am trying to install 7.02. i have lost cd. tried downloading the tryout, but it willnot allow me to add my licence. any ideas?

michelkeeshen wrote:
Thanks for the reponse Big John,
Support would do it for "FREE" but only if I buy two years of support for $299.
This would really be a bit too much. Adobe has officially discontinued support for PageMaker; see
http://www.adobe.com/support/products/pagemaker.html
So now they are selling an officially discontinued program, and also selling officially discontinued support for that product?

Can not connect to internet using bluetooth connection with Nokia N95

Hello!
I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
When i connect using usb cable connection between Nokia and Mac - everything is OK.
Where is the problem?
Thank you!

Hello!
I'm trying to connect to internet using my Nokia N95 as a modem and connecting my Macbook Pro and Nokia using bluetooth connection. Mac says me "Can not connet to PPP server..."
When i connect using usb cable connection between Nokia and Mac - everything is OK.
Where is the problem?
Thank you!

I can not open the book samples acquired in the iBooks Store

I can not open the book samples acquired in the iBooks Store on my MacBook Pro with the latest version of Mavericks, I can only open these samples on my ipad or iphone.

Hold both power on and home button together and ignore the red slider until you see the apple logo. Then let go of both buttons and wait for the phone to reset itself.

N95 can not phone anymore ! Help please !

Hello,
I got my N95 8g 1 week ago.
I updated the mobile with "nokia software updater" but the phone can not hook on any network to call since.
I can go on internet (wlan) but I can t call or receive anything !
And when I try to connect the phone "manually", it finds the networks but freeze when I tell him to join it !!!!
When I put the SIM card to another phone, it works fine !
Thanx in advance for your help

Rebuild your iPhoto Library.
Instructions here > Rebuilding the iPhoto library
I tried to set up iCloud yet my computer will not even give me the option. Everything is updated too..
"iCloud requires iOS 5 or later on iPhone 3GS or later, iPod touch (3rd generation or later), iPad, or iPad mini; a Mac computer with OS X Lion v10.7.5 or later."
Apple - iCloud - Learn how to set up iCloud on all your devices.
Just because everything is updated, doesn't necessarily mean you have the OS X installed that meets iCloud requirements.
You can see which OS X is installed by clicking the Apple () menu top left in your screen. From the drop down menu click About This Mac
The version is noted there.

Nokia N95; can not turn on

I have the old version of N95. I was doing an update. But it turned off an can not turn on again. It vibrates when the buton is pressed but nothing happen after. Any suggestion please?

It does sound like it needs a care point visit to sort it but try a hard reset just in case.
Hard reset:
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.
3. While holding these buttons, press the power button and switch on the phone.
4. Release when the phone shows the nokia logo or shows other signs of life like the language selection screen.
If that fails to fix it try the advice offered in this post by drummer27:
/discussions/board/message?board.id=swupdate&message.id=14152#M14152
If that still fails then the last option is to take the phone to a nokia care point.
Care points/service centres and repair info:
UK • Europe • Asia-Pacific • USA •
Canada • Middle East and Africa
Elsewhere: Click here, select your country, go to the support section, then select repair.
Message Edited by psychomania on 10-Sep-2008 09:11 AM

N95: can not sync contacts & calendar after firmwa...

i have a n95 and i've updated without error to last firmawe version.
this firmware update delete all data (contacts, calendar, notes etc etc) from my mobile and now when i want o syncronize with outlook y can not do it. zero record are sincronized and i have no errors.
i'm thinking to uninstall pc suite and install again but first.... i prefer ask here.
i've change several times sync info and configuration in order to make a change but when i back to outlook i can not sync.
thank you in advance
Salud2, Guind@Soft
.: Haz lo que puedas, con lo que tengas, estés donde estés :.
Solved!
Go to Solution.

thank you very much cricfancy for you answer,about information that you request...
*#0000#
v20.2.011
13.05.08
RM160
h2.01
pc suite 7.1.18.0
i could work with others pc suite tools like send sms, see new contacts created after upgrade).
it seems like pc suite did not know that there are differences between phone db and pc suite db because they had the same "change number". i thinks this value would be reseted after upgrade but for any reason did not do it.
Salud2, Guind@Soft
.: Haz lo que puedas, con lo que tengas, estés donde estés :.

I can not find my audio books on my iPhone.

I have tried to sync my 3 recently purchased audio books with my iPhone with out success. The files work fine on my MacBook, but I can not see them on my iPhone. There is no field for Audio Books in “More” on the phone. I can see a new graph of data labeled “Documents and Data” at the bottom of the screen in iTunes on the MacBook next to the Sync button. I presume this to be the files I am looking for, since I appeared immediately after my last sync. Still I am unable to find or listen to the files on my phone.
In an attempt to correct this problem I just reset my phone. All works well still no audio books.
Also I have noticed I am also having trouble syncing newly acquired music to the same iPhone.
iPhone 5 iOS 7.0.4
MacBook Pro 13-inch, OS X10.9
Any suggestions?

If you have them on your computer's iTunes then you can re-sync them to your device (are they in the Books part of your computer's iTunes library ?) - that has not changed, only the layout of iTunes has changed with the left-hand sidebar not automatically showing, though you can enable it (option-command-S on a Mac, control-S on a PC)
If you don't have a copy of them on your computer nor on a backup then you will need to contact iTunes support and see if they will grant you a re-download - as far as I know it's never been possible to re-download aubiobooks from the store without contacting iTunes support.

Can not update aperture 3.1, wrong app store account

I have recently upgraded to Mavericks, and now can not open Aperture, version 3.1.
I tried upgrading to version 3.5, but the app store says I have the wrong apple account for this app. I only have one Apple account, and all other applications upgrade successfully with it.
Aperture was purchased in a box in version two some years ago, and has been upgreaded a few times, by downloading the upgrade and installing.
I have also moved to a new Mac Pro since the last time I upgraded.
I can find no way to upgrade Aperture, and can no longer use it. It's essential, I'm a photographer.
Kind Regards,
Michael Hund

Micheal,
you can download updaters for all versions, but Aperture 3.5. But the manual upgrade should enable you to upgrade to a version that will run with Mavericks at least, even if it will not let you upgrade to 3.5.
On my laptop at home I have Aperture 3.4.5 already
Does Aperture 3.4.5 run with Mavericks, and can you at least open your Aperture library and continue to use Aperture?
The update to Aperture 3.5 is handled very differently from all other updates. What Apple is doing, is transferring your Aperture registration key to an AppStore licence bound to your AppleID.
If you cannot update and get a warning, that your Aperture is tied to a different account, could mean, that there is a problem with your Aperture serial number. I suspect, if someone else had used your serial number to activate Aperture and upgraded it at the AppStore, you cannot use the same serial number again with your own AppleID. Compare the serial number you are seeing in Aperture's "About Aperture" panel with the ones on your Aperture upgrade boxes. And make sure, that you are signed into the App Store with the same Apple ID on all your Macs, when you are trying the update.
if there should be a problem with the registration code, contact Apple and ask for a replacement serial number: Pro Application Replacement Serial Numbers
Another frequent problem with upgrading Aperture is, that it only seems to be possible, if your main system language is set to "English". Try to set it temporarily to English, while trying to upgrade.

Problem I can not Update new Nokia X6 8Gb firmware...

Problem I can not Update new Nokia X6 firmware Version V.21.0.005,
can someone tell me where can I get new Nokia Software Update for X6 8Gb,
I tried to update new firmware, but this is new version is not Aviable
where I can get new version in my phone serial number: numbers end
in ( 2587 ) and when will update available for my phone serial number be
Thank you

Reasons why a phone cannot update:
1. It is a country variant - country variants often get the updates later, or have updates skipped altogether. A Turkish country variant product code for example, skipped v40 and updated from v31 straight to v50.
2. It is network branded - phones acquired from network providers or these providers' stores SIM free are branded, and will not get updates until the networks approve and modify the updates to their liking.
3. Special editions - These special editions are chartered editions and may never get updates unless taken to a Nokia Care center.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

What is the maximum number of samples that can be acquired with a single trigger using PCI-6036E DAQ card?

1. My PCI-6036E card has a FIFO of 1024 bytes in AI. Maximum how many samples can be acquired with single trigger for digitizing a waveform?
2. PCI-6036E DAQ card has got a AO with 10ks/s update rate? Can I generate a pulsed output with the AO of this card? I need a pulse of, say, 5 V and 1 kHz frequency.

Giri,
1.The trigger is usually for enabling the acquisition. I mean, when it is logic zero, you acquire nothing; however, when it is logic one, you start acquiring your waveform,and you can acquire continuously without having to worry about how many samples, unless you want to set your program for doing so. You can acquire continuously by implementing buffer acquisition. Finally, the FIFO that is in the board will not affect the buffer acquisition.
2.Yes, you can do that! You can generate your 5V signal with that specific frequency, and you should not have any problems, because the freq fits in the update rate.
I hope this information is helpful.
L Aguila
Applications Engineer
National Instruments

Can not acquire licence N95 8G

Similar Messages

Maybe you are looking for