Can not add Infopackage in Process Chain

Hi,
I am in BI 7.0. I want to insert an infopackage to the process chain, but this is not possible. I get the popup to enter an infopackage, but the input field is not ready for input. If I press F4 I get the message 'No data selected'. Then when I press the create button, I get the message 'Create an InfoPackage first in the DWB'. But infopackages are already created in the sytem.
Is there a setting that I am missing?
Thanks.

There is a note for this (OSS Note 1062704):
No data selected
Insert Execute InfoPackage - no data selected
BTW, there are many similar postings by searching for "No data selected".
Edited by: Geo on Apr 4, 2008 9:12 AM

Similar Messages

  • Support Pack 13 - Unable to add InfoPackages to Process Chains

    Hello
    We are having an issue of being unable to add infopackages to process chains.  We are at Stack 12 (SP13).  Any one else encounter this?  Please send suggestions.
    Thanks,
    Praveen

    Hi,
    We are having the same issue here at our client site.  Any help is appreciated!
    Thanks,
    Doug

  • Add InfoPackage in process chain

    Hi to all,
    After Support Package 14 installation I have a problem during creation of process chain when I try to add an InfoPackage.
    When I add an InfoPackage (drag and drop process type ‘Execute InfoPackage’ in the chain) the system show ‘Insert Execute InfoPackage’ popup but the combobox ‘Load Data’ is disabled, I can’t choose any InfoPackage.
    Could we help me?
    Regards,
    Denis

    Thank you very much.
    Denis

  • Adding infopackage in Process chain

    Hi All,
             i am creating processing chain and i am trying to add a infopackage to that.
             but when i press F4 or small square box it is saying there are no infopackage but i have some infopackages created in Datasource.
          while i tried to add DTP it was successful but not able to add infopackages to process chain,
          the process chain is still unassigned is this any thing to deal with this.
          Please hlep me out and i have gone through the blogs in sdn for this but i was not able to figure it out.
    Thanks in advance..
    Srinivas.

    Hi,
    if you are displaying in tree format, then you may not be able to find the process chain.(
    I do not know the reason, but i had the same issue in past, as i remember. but i solved it)
    Please switch to network display in process chain and try again.
    In process chain, go to infosource and with crtrl+f searchh the technical name of the infopackage.
    Let me know if it helps
    Regards
    Derya
    Edited by: Derya Akcakaya on Apr 16, 2008 10:50 PM

  • Not able to include infopackage in process chain creation

    Hi Gurus,
    I'm creating a process chain. while including the infopackage its not allowing me to select the existing infopackage.
    i'm geitting the message "no data selected".
    First we had checked the maintain process types - if the loading process type is maintained or not, we could not find that particular process there we had created a new entry by taking the values from the table "RSPROCESSTYPES".
    Now its show in the maintain process types in RSPC  tcode.
    But still could not add the infopackage.
    any one please throw light on this.
    regards
    KP
    Edited by: KP on Sep 5, 2009 2:55 PM

    Hi,
    If your infopackage is active .. then you should be able to add in the process chain. Please check all the objects if they are active or not. secondly Execute Infopackage is the standard process type available - you dont need to activate the same. Also one rough estimate is to check with your authorizations.
    you can also refer to below link.
    http://help.sap.com/saphelp_nw04/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
    hope this helps.
    Regards
    Raj

  • Infopackage in process chain is not scheduling

    Hi All
    One of infopackage in process chain is not scheduling and showing error message like "<b>Attributes are not yet maintained
    Entire chain now has status 'R'</b>     
    what do we mean about this
    can anyone will let me know in detail and how to correct this?
    Regards
    balaji

    Hi balaji,
    how big is your process chain ? I got a similar problem when I build a metachain with a lot of processes in the chain (more than 60). In this case, the error message is deceiving. If your process chain has similar numbers of processes, check OSS 942804 (Jobcount handling).
    Kind regards,
    Jürgen

  • Logical system Infopackage in process chain

    Dear All,
    I want to schedule a logical system delta infopackage in process chain I have input this package in chain but while activating it gives error "InfoPackage ZPAK_44MTIRL52E5IJXMQVL1BXFCWI is generated; NOT able to be used as loading variant" can any body help me how to resolve this issue.
    Abhijit

    Hi,
    I think this package is created automatically while selecting update data into data targets from the context menu of the ods. This kind of packages cannot be used in chains. Goto rsa1->infosources. Select your 8<odsname> infosource and create a delta package manually. Put that package into the chain. That should work.
    kind regards
    Siggi

  • ABAP program to add in the process chain before the attribute change run

    Hi
    I need a ABAP program to add in the process chain before the attribute change run(process) to avoid the locks, can any one send me the program
    Regards,
    Satish

    I am not sure of any standard program .... but you can write your own... should be a small one..
    you can check if the table RSDMDENQ has entry for your InfoObject... if yes, then its locked.. if not.. its not locked

  • I want to know Cube,Ods,Multiproviders,infopackage groups,process chains

    Hi all,
    1.how to make techinical specifications Cube,Ods,Multiproviders,infopackage groups,process chains.
    2.how to decide the size of the cube.
    3.what is the default size& what is the max size & In the case of ods.
    4.performance wise which is best multiprovider or cube.
    5.why cube is best (performance wise) for  cube over ods.
    6.What is max no of chars & keyfigures can insert in ods.
    7.Is sid concept exists for ods.if yes when they generate.
    Thanks
    cheta.

    Hi
    1.From functional specification requirements,find out the datasources by using business content check(offline) or using Metadata repository(online), u need to have TREX installed in ur system.Do the GAP Analysis and note down the objects which are not in business content and create Z objects(Datasources,ODS or Infobjects,Cubes). Draw the bubble diagram and derrive ER diagram from it and finally do logical information model(cube model) and decide what u need in data flow.
    2.You have a quick sizer in market place which can help you to decide the sizing of BI project.Take care of trade-off's between line item dimensions and normal dimension which have large impact on ur sizing.
    3.There is no such default sizing,depends on ur reporting requirements whether u need detailed reporting or snap shot reporting.
    4.There is no trade-off's between multiprovider and Cube regarding performance.From performance point of view we have to consider other factors such as aggregates,Indexing,Partitioning etc..
    6.The Max number of Keyfields are 16 and data fields are 749.
    7.Yes SID's are created for ODS when you check the flag for BEX Reporting.
    Thanks
    Chandru

  • How to create infopackage groups & Process chains & what is the difference

    Hi gurus,
    please help me to create infopackage groups & Process chains & what is the difference.
    please explain any realtime scenerios.
    when will we choose infopackage groups & process chains
    and what is the difference betweeen these two.
    Thanks & Regards,
    BWcheta

    Cheta,
    You can create the IPG with the selction of all infopackages in RSA1-Modelling Area to automate those loads automatically. That means it will trigger only those IP's which have been pooled up in that IGP...
    Where as Process chain is also a automated process where you can have different process types which can be used during the load and after the load has been done.. For example in ODS once after the data has been loaded if you want to activate the data then in PC youo can insert the process type for that, but in case of IGP it will only execute your IP.
    Hope it helps...
    ******Assign Points*******
    Thanks,
    Gattu.

  • Can not add or Edit in Address book

    please help.
    i can not add or Edit any thing on address book
    Erro i am getting as below.
    Uncaught Exception :
    Application
    net_rim_bb_addressbook_app (232) is not responding;
    process terminated
    Pls let me know what to do now.
    Thanks
    VInod

    Hello Vinod and welcome to the Community!
    Please remove Yahoo! Messenger or Windows Live Messenger for the meantime until a new update has been released because one of these apps' newly updated version is causing the issue to most OS5 phones...
    Ron
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • Insert Execute infopackage on process chain maintenance

    Hy, i have a serious problem: i can't insert a infopackage on process chain that i created on AWB.
    When drag the insert "Execute infopackage process" on process chain and select the match code or F4 button to select an infopackage , receive this message:No data selected.So i can't insert infopackage in my process chain.
    Could you help me?
    Thank's a lot.
    Sincerely yours
    Andrea Maraviglia

    Hi,
    Go to rspc. At top of left pane you can see a data target icon. Click on that. Select your data target. Check the infopackage ckeck box. Here you can select your infopackage.
    Try this out.
    Regards,
    Amruth

  • IPhone 5s can not add events to calander

    Can not add events to calander  go through whole process and event never shows up (is not created)

    Hello Erock78,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning calendar issues:
    iCloud: Troubleshooting iCloud Calendar
    http://support.apple.com/kb/ts3999
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Can not add IPS devices to IME 7.0.1, 7.0.2, 7.0.3 or 7.1.1

    Hi!
    On a new XP SP3 machine with Java 1.6.0.27, I can not add any IPS devices (AIP-SSM-20). I can log in on them with ssh or ASDM.
    I always get this error:
    "Error response from IME Server - IOException: Read Time Out. IME IME Server is not responding. Please check if it is running"
    IME Server service is running (IMEServer.exe and IMEJava.exe process are running on the PC). Trying to restart services it hungs on "Stoping" ... have to kill both process with taskkill and then, restart the Cisco IPS Manager Express service. MySQL-IME servies is up and running
    I tried with IME 7.0.1, 7.0.2, 7.0.3 and 7.1.1 with same result.
    NO firewall on PC, full access allowed on ASA, PC-ASA-IPS are on the same subnet/VLAN
    Tried to re-create the IPS certificates, same error.
    On Java properties, Direct Connection option on Network configuration is selected.
    Any idea what's wrong or what I can try to get IME working?
    Thanks

    In most cases I have encountered exhibiting this behavior, IME is being affected (denied/blocked/conflicting/stopped/etc.) by a HIPS software product installed on the system. If you are able to identify such a product, then try temporarily disabling/removing it and testing again. Some antivirus products can cause this type of behavior as well (including some level of basic HIPS functionality), so you may find that to be the culprit.
    If you are unable to identify the cause, test on a clean OS install (not an existing pre-made image or IT-created image that includes modifications/domain membership/packages/etc.); a completely clean OS install with IME 7.1.1.

  • OPM:Can not find one alive process

    Hi,
    On our external web tier, we are not able to login and I checked error_log.1303171200 and found the below errors
    [Tue Apr 19 08:16:37 2011] [error] OPM:Can not find one alive process
    [Tue Apr 19 08:16:37 2011] [error] [client 10.18.1.160] File does not exist:
    [Tue Apr 19 08:16:41 2011] [error] OPM:Can not find one alive process
    [Tue Apr 19 08:16:41 2011] [error] [client 10.18.1.160] File does not exist:
    [Tue Apr 19 08:16:41 2011] [error] OPM:Can not find one alive process
    [Tue Apr 19 08:16:41 2011] [error] [client 10.18.1.160] File does not exist:
    [Tue Apr 19 08:16:49 2011] [error] OPM:Can not find one alive process
    [Tue Apr 19 08:16:49 2011] [error] [client 10.18.1.160] File does not exist:
    [Tue Apr 19 08:16:53 2011] [error] OPM:Can not find one alive process
    [Tue Apr 19 08:16:53 2011] [error] [client 10.18.1.160] File does not exist:
    Please suggest

    Hi,
    Can you please enable apache logging using below step(picked from MOS _Troubleshooting Login Problems in Oracle Applications 11i (11.5.2 – 11.5.10+) [ID 342332.1]_ )
    Check jserv.log, mod_jserv.log, apache.log and update with error message their
    3. Modify the $IAS_ORACLE_HOME/Apache/Jserv/etc/jserv.conf file. Search for the parameter:
    ApJServLogLevel notice Change the 'notice' to 'info'
    4. Modify the $IAS_ORACLE_HOME/Apache/Jserv/etc/jserv.properties file. Search for the following section:
    log=false Change this to be log=true
    and
    Change
    log.channel=false To be: log.channel=true
    6. Modify the $IAS_ORACLE_HOME/Apache/Apache/conf/httpd.conf file. Search for:
    LogLevel Set the LogLevel to 'info' from its current value.
    7. Modify the $IAS_ORACLE_HOME/Apache/Apache/conf/httpd_pls.conf file (if it exists). Search for the following parameter
    LogLevelSet the LogLevel to 'info' from its current value.
    8. Modify the:
    $IAS_ORACLE_HOME/Apache/modplsql/cfg/wdbsrv.app
    add the line:
    debugModules=Info
    immediatly after the line:
    custom_auth = CUSTOM
    9. Start the HTTP Server.
    10), Reproduce the error message.
    As enabling logging will create lot of logs and user might feel slowness so you should disable it as soon as you are done.
    11) revert back old files and bounce apache.
    Thanks,,
    JD
    Edited by: user12001639 on 19-Apr-2011 02:34

Maybe you are looking for