Can not add the Palm Emulator to Sun ONE Studio 5 ME

I am trying to add the Palm Emulator (version 3.5) to the list of emulation devices within the Sun ONE Studio 5 ME.
First, it seems like Studio 5 requires that the emulator resides in a bin subdirectory. Second and here where the problem is. Once the emulator is identified by Studio 5 (as a "Standard UEI Emulator" and after I click on "Next", Studio 5 tries to get information about the configuration of the emulator and its profiles.
I, immediately get an error (generated by the Palm OS Emulator) stating: "Don't understand the command line parameter "-version"." within a message box. Once I click OK, the Studio 5 says that the operation failed.
This is as far as I could go.
I would like to mention that I am running Windows XP Professional with Service Pack 1. I am also working with a ROM image that I downloaded from my PalmVx PDA.

Hello Hassan,
I've done the following: I've used Palm emulator that's included with WTK 1.0.4_01 provided with Sun ONE Studio 5, ME. If you try to execute application using this 'device' you'll be asked to point to directory with Palm Emulator 3.5 (the one you have), emulator.exe. Then it takes over and asks for skins, ROMs and other stuff.
Hope this helps,
Peter

Similar Messages

I can not add the smart lists to ipod

I can not add the smart lists to ipod, itunes If (when clicking the lists are empty) but notas add to the ipod touch are not added automatically.

Experiencing exactly the same error. The error only occurs on the clustered gateway. Non-clustered gateways work fine. I followed Kristian's whitepaper exactly except that I didn't use a service template to create the gateway cluster. All NICs are connected
to the proper switches. There are no relevant events/errors on the hosts or the gateway cluster nodes.
Troubleshooting steps taken so far...
1. reboot everything
2. deleted the network service from VMM and re-added
3. Verified that HNV is working on the host cluster by disabling "host dedicated to gateway" and moving an NVGRE VM to the cluster.
4. Verified all other networks are working properly on the host cluster.
5. Deleted and re-added all NICs in the gateway cluster.
6. Verified that the gateway can be configured using Powershell on the host and remote.
Now I'm going to create another clustered gateway and another non-clustered gateway to reproduce the problem.
Any other suggestions would be greatly appreciated.

I can not get the debugger to work on oracle studio 12.3 - It will not attach

I can not get the debugger to work on oracle studio 12.3 - It will not attach

APN for Tmobile is epc.tmobile.com
MMSC is http://216.155.174.84/servlets/mms
Here are the instructions:
Create devel catalog (appl from this catalog can damage your phone but don't have to so if you are not sure about your needs or skills dont use it and wait for official applications from Nokia or firmware update) The software hosted in Extras-devel is NOT ready for normal users! PLEASE PLEASE PLEASE don't play with it unless you really know what you are doing. Be ready to file proper bug reports instead of posting complaints. Expected problems: crashes, battery drain, poor system performance, full disk space & more - SERIOUSLY! Don't play with Extras-devel if you haven't backed up your data or are prepared to re-flash your device.
Application manager --> Application catalogs --> New
Catalog name: Extras-devel
Web address: http://repository.maemo.org/extras-devel
Distribution: fremantle
Components: free non-free
Refresh catalogue
Install fAPN and fMMS
Run fAPN and create new APN with MMS setting which you can get from your operator or find on this page (this may not be needed for all users, see note below)
Run fMMS and it will start with configuration
Put APN name the same you named your MMS APN point during fAPN configuration
Type MMSC which you can take from your operator
Type your number starting with +
Put max size of pics you want to have in outgoing MMS
Save all and start sending MMS from fMMS menu.
It is very important to put correct setting in new APN and be sure if there is proxy needed in your operator.
WHEN YOU GO TO MMS to set your configuraions, the information should look like this
MMSC: http://216.155.174.84/servlets/mms
Resize Image: 300
Your Phone Number: +##########
NOW U ARE DONE!! =)

I can not add the warning before buying an app. Could you please explain how to add this warning

Please tell me how to add the warning before purchasing an app?

Hey klw67
Thanks for the question. Are you referring to the prompt for your password? If so, this can be achieved by utilizing the Restrictions (parental controls) of the specific device. For information on setting up and using Restrictions, see this resource:
iOS: Understanding Restrictions (parental controls)
http://support.apple.com/kb/HT4213
You can prevent access to specific content types:
- You can also adjust the time necessary before a password is required to purchase content.
Thanks,
Matt M.

User can not add more then two products against one order

Hi frnd,
My requirement is in CRM while creating order using CRMD_ORDER transaction. The user can not be entered more then two products against one order.
I am using CRMD_ORDERADM_I_BADI badi to give error I am unable to use this badi. Is there any other options are there.
Please do need full help.
Regards,
Ashish.

Hi Amit,
DATA: gt_header TYPE crmd_orderadm_h. "OCCURS 0 WITH HEADER LINE.
data: ET_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
data: gs_PRODUCT_I     TYPE     CRMT_PRODUCT_I_WRKT.
DATA : gt_header_guid     TYPE     crmt_object_guid_tab.
DATA : gs_header_guid     TYPE     crmt_object_guid.
gs_header_guid = IV_HEADER.
*INSERT gs_header_guid INTO TABLE IV_HEADER.
CALL FUNCTION 'CRM_ORDER_READ'
    EXPORTING
      it_header_guid       = gt_header_guid[]
    IMPORTING
      ET_PRODUCT_I         =   ET_PRODUCT_I[]
    EXCEPTIONS
      document_not_found   = 1
      error_occurred       = 2
      document_locked      = 3
      no_change_authority = 4
      no_display_authority = 5
      no_change_allowed    = 6
      OTHERS               = 7.
endmethod.
I am using ds code. Its working fine records are coming in Product. But how i will save product into one
itab.
Regards,
Ashish S

My ipod nano isn't recognized on my computer and I can not add the new music I bought on itunes. Please help

My ipod nano isn't recognized on my computer any more. I bought new music and i can't get it to my ipod. I also bought a shuffle and the same thing happened.

iOS: Device not recognized in iTunes for Mac OS X
Or
See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
Also see:
iPod not recognised by windows iTunes
Troubleshooting issues with iTunes for Windows updates
- Try on another computer to help determine if computer or iPod problem

Can not see the report under SAP Business one

Hi,
When I click on preview in SAP BO from CR, this message is appear : Value cannot be null
Why ?
Please help me

Post your B1 questions to the B1 Forum

Can not add intercom button to phone template in cucm 8.5

For some reason I can not add the intercom button to phone template in cucm 8.5

Hi Matthew,
You may be seeing this (it's older info);
Intercom Support for Cisco Unified IP Phones
Cisco Unified IP Phone Model
SCCP
7931
7941
7941G-GE
7942
7945
7961
7961G-GE
7962
7965
7970
7971
7975
You can check your version;
Intercom Support for Cisco Unified IP Phones
The list of devices that support the Intercom feature varies per version and device pack.
Use the Cisco Unified Reporting application to generate a complete list of devices that support the Intercom feature for a particular release and device pack. To do so, follow these steps:
1. Start Cisco Unified Reporting by using any of the methods that follow.
The system uses the Cisco Tomcat service to authenticate users before allowing access to the web application. You can access the application
–by choosing Cisco Unified Reporting in the Navigation menu in Cisco Unified Communications Manager Administration and clicking Go.
–by choosing File > Cisco Unified Reporting at the Cisco Unified Real Time Monitoring Tool (RTMT) menu.
–by entering https://:8443/cucreports/ and then entering your authorized username and password.
2. Click System Reports in the navigation bar.
3. In the list of reports that displays in the left column, click the Unified CM Phone Feature List option.
4. Click the Generate a new report link to generate a new report, or click the Unified CM Phone Feature List link if a report already exists.
5. To generate a report of all devices that support Intercom, choose these settings from the respective drop-down list boxes and click the Submit button:
Product: All
Feature: Intercom
The List Features pane displays a list of all devices that support the Intercom feature. You can click on the Up and Down arrows next to the column headers (Product or Protocol) to sort the list.
Cheers!
Rob

How to enable telemetry logs and where can i find the command line for sun

Hi i tried creating the telemetry logs directory but the logs are not being populated. i created the following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.
Also pl. tell me where can i get the command list for sun one messaging server to use the command line utility to list, delete mailboxes. also can i search for all the mailboxes under one domain name. if yes then which command i have to use.
thanks in advance.

Hi,
Hi i tried creating the telemetry logs directory but
the logs are not being populated. i created the
following directory:-
/opt/SUNWmsgsr/data/telemetry/imap/usersns1
where usersns1 is the userid.Make sure the permissions (ownership) on the user directory and the sub directory match those that messaging server uses - by default mailsrv:mail. This is the most common cause of the telemetry data not being created. The other thing to verify is that the user's account isn't stored as user@domain, otherwise you may need to create the directory as the entire user@domain (try both just to be sure).
Also pl. tell me where can i get the command list
for sun one messaging server to use the command line
utility to list, delete mailboxes. also can i search
for all the mailboxes under one domain name. if yes
then which command i have to use.The Messaging Server reference guide is a good place to start (lists all the command-line utilities/flags and what-not):
http://docs.sun.com/app/docs/doc/819-4429?l=en
The mboxutil command is used to list/create/delete mailboxes and you can use a pattern to only list those mailboxes in a specific domain.
Regards,
Shane.
thanks in advance.

Able to add 2 titles, but need 4, can't add the other two

Hello
This question has been posed,and seems to remain unanswered. I know the procedure to add titles, I have added 2 to my video project, but can not add the last two. At some point the background of my video project turned from green (the color it changed to when I added audio) to a purple color. Each time i try to drag the title box to the frame it snaps back to its original place....really, I must be crazy because I have tried to do this about 300 times...with the same results...yet I try again. Someone on this site sort mocked us....saying Apple should provide the answer, true they should, but they are not going to...so I implore those of you who know the answer to this question, please, please enlighten me and the others that may have it....is it me, is it a bug, is there work around.
THank YOu for any help you can offer

No, you cannot, unless you are just referring to apps that are in the multi-tasking list. The groupings of icons on the screen cannot exceed 4 across.,

Help me, I can not remember the phone app id.

Help me, I can not remember the phone app id.

No one here will know it. Suggest you try really hard to remember it.

Oracle.jdbc.driver.OracleDriver not found in Sun ONE Studio

I get this message when I try to connect to the database while creating an EJB. I have tried adding the path to my CLASSPATH, and to adding it to the various CLASSPATHs within Sun ONE Studio. IDE_HOME is defined correctly but OracleDriver.class is still not found. Anyone know what my problem might be?
Thanks,
Michael A. Moran

Hi Sujatha,
Thanks for responding. My CLASSPATH is as follows:
madonna% echo $CLASSPATH
/export/oracle/jdbc/lib:/export/oracle/jlib:/export/oracle/jsp/lib:/export/oracle/sqlj/lib/runtime.zip:/export/oracle/oem_webstage:/export/oracle/lib/aurora_client.jar:/export/oracle/jdbc/lib/classes12.zip:/export/oracle/sqlj/lib/translator.zip:/export/oracle/sqlj/lib/runtime12.jar:/export/oracle/lib/vbjorb.jar:/export/oracle/lib/vbjapp.jar:/export/oracle/lib/mts.jar:/export/oracle/javavm/lib/aurora.zip:/export/oracle/javavm/utl/ejb/lib/vbj30ssl.jar:/export/oracle/jlib/javax-ssl-1_2.jar:/export/oracle/jlib/jssl-1_2.jar:/export/oracle/lib/servlet.jar:/export/oracle/lib/http_client.jar:/export/oracle/lib/http_server.jar:/export/oracle/oem_webstage/oracle/jdbc/OracleDriver.class:/export/oracle:/export/oracle/jdbc/lib/nls_charset12.jar
Which as you can see includes classes12.zip and /export/oracle/oem_webstage/oracle/jdbc/OracleDriver.class
I have also set all the IDE internal classpath variables to the same settings. It has no effect. I still get the same message.
Michael

Using JMF API with Sun One Studio v4 update 1 (community ed.)

Having great difficulty trying to utilise the JMF API I've just downloaded with Sun One Studio v4, update 1 (community edition).
After installing the API, I tried copying the the .jar files under the lib folder of JMF to the lib folder of sun one studio.
Although admittedly a novice in the field of adding API's I have attempted to add the .jar files into the libary of recognised modules but made no progress.
The problem is that although JMF API is installed, Sun One Studio does not seem to be aware of this and so does not recognise any associated libraries e.g. java.media or JMFApplet.
I would appreciate advice from anyone who knows how to configure Sun One Studio to utilise the JMF API.
Mark

All right, I think I may have solved it. After mounting jmf.jar I needed to update the parser database. All the libraries seem to be there.
Can someone clarify though, the trial program i'm using makes reference to: java.media
I don't have this module. I do instead have javax.media which I believe includes all the methods of the java version. Am I right or am I missing this crucial module??

Sun One Studio 4 U1 to App server 7 integration

I start the Application server 7 with the command line 'asadmin start-appserv' and everything seems to work fine. I can log on to the administration via http://localhost:4848/admin and see that the server1 instance has started and exists. I go back to the runtime tab in Sun ONE Studio and the the Server Registry has no entry for the SunOne App server. (I know it used to cause I deployed apps to it!) What happened? is there a way to 'Refresh' the Server Registry or the Installed Servers underneath?
Any idea's would be appreciated
Cam

Thanks for all the information. What I had to do was this:
(By the way this is with the Enterprise Try and Buy edition)
After searching around I got to Options -> IDE Configuration -> System -> Modules -> J2EE support -> Sun One Application Server 7
the properties had an Enabled = false. I couldn't set it to true though. SOoooo I registered (I thought I was already but ... ). I then went and Updated EVERYTHING under Sun ONE Studio. After this I still could not update this property so I went back and updated EVERYTHING under NetBeans (I think there was an Open API support module that I suspect was the one I had to update). After this I was able to set the property flag to true and voila! the Sun ONE application server was settable to true and it appeared in the Server Registry.
There is still a slight nagging problem though
When I set this to true however, it asked that I set a bunch of other things to true as well, (EJB Build, EJB Assembly, etc) While I don't know why it wouldn't set them up by itself it didn't. So after setting them to true the module icons appear with a red 'T' through them. I don't know what this means. ( I searched help for 'icons' 'T', etc, but didn't find anything). It seems to be working now though so that's good! I'll try to deploy a couple of applications and see what happens.
Thanks for your help

How to load image to midlet using SUN ONE Studio 4, ME?

Hi, everyone:
I'm trying to load an image to my midlet using Sun ONE Studio.
Image image = null;
try
image = Image.createImage("/Duke.png");
}catch (Exception ex) {}
ImageItem item = new ImageItem(null,image,ImageItem.LAYOUT_CENTER,null);
append(item);
I copied Duke.png in the same directory with midlet class file. But I can't see the image. I can get correct result by using J2ME wireless toolkit.
Anybody know how to use Sun ONE Studio to load image?
Thank you in advance!

Hi, everyone:
I'm trying to load an image to my midlet using Sun ONE
Studio.
Image image = null;
try
image = Image.createImage("/Duke.png");
}catch (Exception ex) {}
ImageItem item = new
m = new
ImageItem(null,image,ImageItem.LAYOUT_CENTER,null);
append(item);
I copied Duke.png in the same directory with midlet
class file. But I can't see the image. I can get
correct result by using J2ME wireless toolkit.
Anybody know how to use Sun ONE Studio to load image?
Thank you in advance!
Hi,
I have the same problem that you had with the path to the .png file in
sun one studio 4, ME.
Have did you solve it?
I have all my .java files and the .png file in the same dir. and
the call for creating the Image look like this:
logo = Image.createImage("/splash3.png");
and it does not work.
The .png file is in the jar content.
Will be thankful for all help!

Can not add the Palm Emulator to Sun ONE Studio 5 ME

Similar Messages

Maybe you are looking for