Can Not Apply Labels

Hi, All.
I've upgraded from Bridge CS4 to CS5. It's been great, except for one thing: I can't seem to apply any labels of any kind to files.
Here's what happens: I select the files which I want to label and either use the keyboard shortcut or the menu bar to apply a label. Then, nothing changes. No color appears, and, if I go back to the menu bar, there aren't any check marks next to the labels that I've applied. Things that are labeled from CS4 appear as a white bar.
Any suggestions, hints, or ideas?
Should I file a bug report?
Thanks in advance!
-Nate

Thanks for the link!
Even though I was pretty sure that I had all the permissions I needed, I went to the Get Info window for the root of the drive that my photos are on. I was owner and had r/w, but to be sure I did a Apply To Enclosed Items. This fixed things.
Thanks!

Similar Messages

  • I can't apply labels to images in version 2.1.1

    Last November 3rd I updated IBooks Author to version 2.1.1 (459). Since that day I can't apply labels to images. I can edit labels for the existing images, but there isn't any label list when I import a new one. If I create a new widget, labels are applied and can be edited.
    I've tested this issue with new documents and existing ones with the same result. I also tried to restore a version 2.1 from my previous TimeMachine backups, but no succes.
    I've being working well since I installed Maveriks, until this version 2.1.1 update. It is a bug? I've read complains about the same failure in the comments of the App Store from Spain. Can I downgrade iBooks author?
    I am finishing a techical book with hundreds of images, so, you know what I am feeling.

    Might be a bug - best to contact Apple directly so they can take a look, I think...
    Global Phone Support
    We have expanded English-language publisher phone support. To make contacting the iBookstore support even easier, new local phone numbers are now available for Australia, France, Germany, Italy, Netherlands, Spain, and the U.K. Support is available Monday to Friday, from 7 a.m. to 5 p.m. (PT).
    Country
    Phone Number
    Australia
    1300 307 504
    Note that this is a low tariff number.
    France
    0805 540 117
    Germany
    0800 664 5307
    Italy
    800 915 902
    Netherlands
    0800 0201 578
    Spain
    900 812 687
    U.K.
    0800 975 0615
    U.S.
    +1 (877) 206-2092
    Toll-free from U.S. and Canada.
    Good luck.

  • Can not color label more than one file at a time

    Hi,
    I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
    Wether i select two, twenty or twohundred only one file gets color labeled.
    It doesn't seem to matter if i assign a color label through the File menu or right click > label.
    Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
    Does anyone else have this issue and/or a fix for it?
    Thanks,
    Jay

    Aaaaanyone ?

  • Can not apply 9.2.0.1.0A patch

    Hi,
    I can't apply OLAP 9.2.0.1.0A patch.
    Bellow is the error message I got and it seems like the aditional '/' in the path is causing the problem. Can anyone help me with this problem? Thank you very much.
    Best Regards,
    Seiji
    $ OPatch/opatch apply
    Performing pre-patch installation checks.
    It is safe to abort the patch process at this time.
    Do you want to continue and apply the patch?
    Please respond Y|N > Y
    Backing-up files before patching.
    Applying patch 2499827.
    Running make for olap_on.
    Running make for ioracle.
    ld: warning: file /export/home/app/oracle/product/9.2.0.1.0/lib//liboraolap9.a(xsunwind.o): wrong ELF class: ELFCLASS32
    Undefined first referenced
    symbol in file
    xsaggrflcu /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(kslt.o)
    xsNotify /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsstatedump /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xssinfoflcu /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(kslt.o)
    xsawsv /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(ksst.o)
    xscts_ktccg /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(ktct.o)
    xsawugaInitialize /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsncupd /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsoqNotify /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsawLatchRecov /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(kslt.o)
    xsoqugaSwitch /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(ksmuf.o)
    xspgpoolchg /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsoqugaInitialize /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsolapi_fvec /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(psdsys.o)
    xscts_fvec /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(psdsys.o)
    xsawugaSwitch /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(ksmuf.o)
    xsaggrftc /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(kqf.o)
    xssinfoftc /export/home/app/oracle/product/9.2.0.1.0/lib//libserver9.a(kqf.o)
    xsdbpcps /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsoqugaDestruct /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    xsawugaDestruct /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib//libknlopt.a(xsyeolap.o)
    ld: fatal: Symbol referencing errors. No output written to /export/home/app/oracle/product/9.2.0.1.0/rdbms/lib/oracle
    make: Fatal error: Command failed for target `/export/home/app/oracle/product/9.2.0.1.0/rdbms/lib/oracle'
    OPatch/opatch.pl version: 1.0.0.0.3
    Copyright (c) 2001,2002 Oracle Corporation. All Rights Reserved.
    Please re-run this patch script after the problems have been resolved.
    There were problems in running the make commands needed to finish the
    patching process.
    The errors encounted were:
    Error for command: make -f ins_rdbms.mk ioracle

    Hi,
    I think I could install the patch successfully. But, when I try to create a new OLAPConnection with JDev903, I recieve an error message "BIB-16631 Cannot connect to the database because a required patch has not been correctly applied". What I have done is...
    1)Installed Oracle Database 9.2.0.1.0 32bit version on Solrais 8.
    2)Applied 9.2.0.1.0A Patch
    a)unzipped pe2499827.zip
    b)shutdown database and listener
    c)verified that ORACLE_HOME was set correctly
    d)"OPatch/opatch apply" from 2499827 directory (completed successfully)
    e)cd to 2499827/files/olap/admin
    f)sqlplus "/ as sysdba"
    g)startup
    h)@olapu2499827.sql (completed successfully)
    i)restart database and listener
    3)Installed jdev903_pre to C:\jdev903_pre (on win2000 client)
    4)Installed bibeans903
    5)Copied classes12.jar, classes12dms.jar, nls_charset12.jar from $ORACLE_HOME/jdbc/lib(Sun server) to C:\jdev903_pre\jdbc\lib(win2000 client)
    6)cd to C:\jdev903_pre\bibeans\bin
    7)set JDEV_ORACLE_HOME=C:\jdev903_pre
    8)switcholapver 92 (completed successfully)
    9)Opened jdev903_pre and tried to create a new OLAP Connection from the BI Designer Wizard and got the follwoing error while testing the connection.
    oracle.dss.connection.common.ConnectionException: BIB-16631 Cannot connect to the database because a required patch has not been correctly applied. Required patches are described in the BI Beans installation guide.
         oracle.dss.metadataUtil.PropertyBag oracle.dss.connection.server.drivers.mdm.MDMConnectionDriverImpl.connect(oracle.dss.metadataUtil.PropertyBag)
              MDMConnectionDriverImpl.java:217
         oracle.dss.connection.common.ConnectionObj oracle.dss.connection.server.ConnectionImpl.connect(oracle.dss.connection.common.ConnectionObj, oracle.dss.metadataUtil.PropertyBag)
              ConnectionImpl.java:279
         int oracle.dss.connection.client.Connection.connect(oracle.dss.metadataUtil.PropertyBag)
              Connection.java:401
         int oracle.dss.connection.client.Connection.connect()
              Connection.java:320
         int oracle.dss.addins.designer.OLAPSource.test()
              OLAPSource.java:196
         void oracle.dss.addins.wizard.connection.OlapTestPanel.testConnectionImpl()
              OlapTestPanel.java:35
         java.lang.Object oracle.dss.addins.wizard.connection.TestConnectionPanel$2.construct()
              TestConnectionPanel.java:180
         void oracle.jdeveloper.common.SwingWorker$2.run()
              SwingWorker.java:168
         void java.lang.Thread.run()
              Thread.java:484
    Am I missing something? Has anyone been able to successfully connect to Oracle Database 9.2.0.1.0A from jdev903_pre? Thank you very much.
    Best Regards,
    Seiji

  • Font style can not applied with the eye dropper ??!

    I am working with font "not a free one" and it has a problem that I can not take its style with the eye dropper,
    it only gives the same font name but the shape of font did not applied

    It's necessary to know if the text is under Illustrators full control or if the other program interferes.
    Also it's still not quite clear what exactly you are doing in which order.
    Are you using character and paragraph styles?
    Normally if you select words or paragraphs with Illustrators text tool, you can pick up styles from other texts with the eyedropper. So how exactly are you using the tools?

  • PL/SQL problem with too many lines - can not apply changes

    I have a complex PL/SQL that requires checking 90 check boxes and the query works to a certain point then it just stops being able to be saved (apply changes) after a high no. of lines has been typed in. (The PL/SQL query is to check against a file, that the file has all the check boxes as yes. If there is only 1 or 2 boxes checked, then the sql created only checks those 2 fields for yes.) Is there a way to increase the coding space (or number of lines) that APEX can save/use.

    This is the whole PL/SQL coding. At this point, we cannot add any more lines or it will come up with "web page cannot be found" message.
    declare
    q varchar2(32767); -- query
    new varchar2(1):='Y'; -- first one
    begin
    q := 'select a."CONTR_ID", a."NAME", b."PHONE_NO", b."EMAIL_ADDR" FROM contractor a, contacts b where a.contr_id = b.contr_id and a.contr_id not in (Select unique a."CONTR_ID" from contractor a, contractor_competency b where a."CONTR_ID" = b."CONTR_ID" ';
    -------------------Start ENV
    if :P33_AIR_QUALITY_TESTING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Air Quality Testing'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_ASBESTOS_REMOVAL_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal De-Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_ASBESTOS_REMOVAL_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Asbestos Removal Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_BUILDING_ASBESTOS_REMOVAL = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Building Asbestos Removal'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_ENVIRONMENTAL_CONSULTING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Environmental Consulting'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_MANHOLE_ASBESTOS_REM_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal De-Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_MANHOLE_ASBESTOS_REM_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Manhole Asbestos Removal Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_OIL_FILTERING = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Oil Filtering'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_OIL_SAMPLING = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Oil Sampling'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_OIL_SPILL_CLEANUP = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Oil Spill Cleanup'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_PUMPING_OUT_MANHOLES = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Pumping Out Manholes'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_SIGNED_ENVIRO_DOCS = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Signed Enviro Docs PRO-MS-008'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_TRANSPORTATION_OF_D_GOODS = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Transportation of Dangerous Goods'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_TRANSPORTATION_OF_PCB = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Transportation of PCB'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_WASTE_PICK_UP = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Waste Pick-Up'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    -------------------- start OCM
    if :P33_GREENFIELD_POLELINE_CONST = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Greenfield Poleline Construction'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_HV_OVERHEAD_MAINTENANCE = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''HV Overhead Maintenance'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_INSULATOR_WARNING = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Insulator Warning'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_LV_OVERHEAD_MAINTENANCE = 'YES' then
    if new = 'Y' then q := q || ' and (';
    new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''LV Overhead Maintenance'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_OVERHEAD_INFRARED_SCAN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Overhead Infrared Scanning'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_POLEHOLES_AND_ANCHORS = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || ' (instr(upper(b."JOB"),upper(''Poleholes and Anchors'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_POLELINE_INSPECTION = 'YES' then
    if new = 'Y' then q := q || ' and( '; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || ' (instr(upper(b."JOB"),upper(''Poleline Inspection'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_POLELINE_WORK_TO_35KV = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || ' (instr(upper(b."JOB"),upper(''Poleline Work to 35KV'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_POLELINE_TO_44KV = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || ' (instr(upper(b."JOB"),upper(''Poleline to 44KV'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_ROCK_DRILLING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Rock Drilling'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_TENSION_STRINGING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || ' (instr(upper(b."JOB"),upper(''Tension Stringing'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_TREE_TRIMMING_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (De-Energized)'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_TREE_TRIMMING_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Tree Trimming (Energized)'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_WOOD_POLE_TESTING_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing De-Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_WOOD_POLE_TESTING_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Wood Pole Testing Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    ------------------ start UCM
    if :P33_CO2_CLEANING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''CO2 Cleaning'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_CABLE_PULLING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Cable Pulling'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_CABLE_TESTING_DEENERGIZED = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Cable Testing De-Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_CABLE_TESTING_ENERGIZED = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Cable Testing Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_CONC_DUCT_MAN_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (De-Energized)'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_CONC_DUCT_MAN_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Conc. Duct & Manhole (Energized)'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_DIR_BURIED_DUCT_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (De-Energized)'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_DIR_BURIED_DUCT_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Direct Buried (Energized)'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_DIRECTIONAL_BORING_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Directional Boring De-Energized'')) > 0) and
    ((instr(upper(b."SET_YES_NO"),''NO'') > 0) or
    (instr(upper(b."CRAFTMAN_YES_NO"),''NO'') > 0) and
    (instr(upper(b."PROBATION_YES_NO"),''NO'') > 0)) ';
    end if;
    if :P33_DIRECTIONAL_BORING_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Directional Boring Energized'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_GENERAL_EXCAVATION = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''General Excavation Around Plant'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_HV_UG_MAINTENANCE = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''HV Underground Maintenance'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_LV_UG_MAINTENANCE = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''LV Underground Maintenance'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_MANHOLE_CLEANING_DEEN = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning De-Energized'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_MANHOLE_CLEANING_ENER = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Manhole Cleaning Energized'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_MANHOLE_INSPECTION = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Manhole Inspection'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_UG_EQUIPMENT_INSPECTIONS = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''UG Equipment Inspections'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_UG_INFRA_RED_SCANNING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''UG Infra Red Scanning'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_UG_CABLE_LOCATES = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Underground Cable Locates'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    ------------------------ start SCM
    if :P33_FENCING_AROUND_SUBSTATION = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Fencing Around Substation'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_FENCING_GREENFIELD = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Fencing Greenfield'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_INSPECTION_AND_TESTING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Inspection And Testing'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_STATION_CIVIL_WORK = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Station Civil Work'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_STATION_CONST_DEENERGIZED = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Station Construction (De'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_STATION_CONST_ENERGIZED = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Station Construction (E'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_STATION_INFRARED_SCANNING = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Station Infrared Scanning'')) > 0) and
    (instr(upper(b.”SET_YES_NO”),''NO'') > 0) ';
    end if;
    if :P33_STATIONS_ASBESTOS_REMOVAL = 'YES' then
    if new = 'Y' then q := q || ' and ('; new := 'N';
    else
    q := q || ' or '; end if;
    q := q || '(instr(upper(b."JOB"),upper(''Stations Asbestos Removal'')) > 0) and
    (instr(upper(b."SET_YES_NO"),''NO'') > 0) ';
    end if;
    if new = 'N' then q := q || ' ) ';
    end if;
    q := q || ' ) ';
    return q;
    end;

  • Newbie Can not Apply 9.2.0.5.0 patch on windows 2000 server

    Hi all,
    I am trying to apply patch set 9.2.0.5.0, to oracle database 9.2.0.1.0 release 2, but it seems imposible.
    I recive this msg:
    There are no patches that need to be applied from the patch set Oracle9i patch set.
    I have read the readme that came with the patch set but I don't realy understand what they want me to do. Cos I am real newbie with oracle.
    Can some one please help?
    Tanx in advance,
    Admir

    I got it.
    You have to install the patch in the home dir of you data base and not the home dir that installer creates eachtime it starts.
    Also, those commands, in readme file that came with the patchset, are sql command and after each one there should be ; . This doesn't say sometimes in the read me file.
    Also when starting the migration tool use ; at the and of the command.
    By the way, who writes documentation for oracle products? Don't they need to be fired?

  • Can not apply redo file

    I have configured Oracle Data Guard [Oracle 11g R2] with the help of steps from http://www.orafaq.com/node/2030. "select sequence#, applied from v$archived_log order by sequence#;" show 10 rows with applied status "NO" on primary db, and "no rows selected" on standby db.
    Primary DB
    db_name : orcl
    db_unique_name : prim
    Standby DB
    db_name : orcl
    db_unique_name : stan
    both databases were setup on different machines with same configuration and folder structure.
    Please help to solve this issue.
    Thanks in advance,
    Manu

    K.At standby side i started database as follow
    sql>startup open recover;
    After that i execute at standby
    sql> alter database recover managed standby database cancel;
    when i execute this some error logs are generated in the primary side"F:\app\sujina.a\diag\rdbms\prim\orcl\trace\alert_orcl.txt"
    This is the error logs:
    Fatal NI connect error 12514, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.27.44)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl.tvm.nestgroup.net)(CID=(PROGRAM=f:\app\sujina.a\product\11.2.0\dbhome_1\bin\ORACLE.EXE)(HOST=N1359-W7)(USER=SYSTEM))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.2.0.1.0 - Production
    Time: 20-APR-2011 12:33:13
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    Fatal NI connect error 12514, connecting to:
    (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.1.27.44)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=orcl.tvm.nestgroup.net)(CID=(PROGRAM=f:\app\sujina.a\product\11.2.0\dbhome_1\bin\ORACLE.EXE)(HOST=N1359-W7)(USER=SYSTEM))))
    VERSION INFORMATION:
         TNS for 32-bit Windows: Version 11.2.0.1.0 - Production
         Windows NT TCP/IP NT Protocol Adapter for 32-bit Windows: Version 11.2.0.1.0 - Production
    Time: 20-APR-2011 12:33:13
    Tracing not turned on.
    Tns error struct:
    ns main err code: 12564
    TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
    Error 12514 received logging on to the standby
    Errors in file f:\app\sujina.a\diag\rdbms\prim\orcl\trace\orcl_arc1_3616.trc:
    ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
    PING[ARC1]: Heartbeat failed to connect to standby 'STAN'. Error is 12514.
    pls help..
    And one thing i want to know that to which mode i have to startup the primary side.
    Then,
    When shutdown occurs it will dergister from the listener,that was ok.But after that i connected to sys/*** as sysdba and startup the database.Also i restarted the listener...After all when i try to connect sys/***@PRIM as sysdba or sys/***@STAN,it shows the tnslistener error..does it happen?Actually i want to know when it again register with listener?If I cannot connect primary from the standby and standby from primary using this net_service_name,does redo log apply occurs?
    sujina

  • I purchased the export program to put excel into word. I can not print labels and the adobe ad is in

    I put the question into the box above.

    Good day,
    I'm not sure what the issue is you're facing.  Our ExportPDF service is designed to allow you to convert PDF files to Word (.docx) or Excel (.xlsx) files.  You can place Excel files in Word documents without the aid of our service.  Could you clarify what the challenge is that you're facing?  Hopefully we can assist you or at least point you in the right direction.
    Kind regards,
    David
    Acrobat Community Manager
    Adobe Systems

  • Can not apply update, hangs at connecting to update server

    Get a software message advising me to update, update downloads, but when I try to apply it, a window pops up saying Software update, , connecting to update server, nothing happens it just sits there for hours as if it is downloading, but nothing happens, have tried several times to download update

    It looks that the update wasn't successful because your "More system details" list still shows a Firefox 3.5.19 version.
    If there are problems with updating then best is to download the full version and uninstall the currently installed version.
    Download a fresh Firefox copy and save the file to the desktop.
    * Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder] and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    See also:
    * http://kb.mozillazine.org/Software_Update (Software Update not working properly)

  • I have a graph with the x axis for volume and the y axis for mass, I need the data to correlate with the volume and mass, I can not simply label the axis this way, how can i do this?

    This is extremely urgent and please help!!!

    Do you mean something like this?
    If so, go to the Chart inspector. On the Axis tab of the Chart Inspector you can set the format for each axis. Choose "custom" then type in the units at the end of the format that is there.  You can't get fancy, like having superscripts or anything.
    Alternatively you can show the axis titles, also in the chart inspector:

  • Can not apply transitions

    This is my first try with FCP 7. And the first time I need transitions..
    I have about 40 clips in the timeline, each 15-25 sec long. Whenever I want to apply transitions, I get the same message: "There was insufficient media at one or more edit points. Would you like to accept the others?"
    Don't know the meaning of that!
    My clips are long enough for a 1 sec transition.

    Clip handles are editing 101. In order to create a transition between two clips, there needs to be enough EXTRA media aside from the length of the clips to cover the length of the transition.
    In other words: If you have two 5 second clips in your sequence, and you want to do a 30 frame dissolve between those clips, you need 15 frames extra at the end the first clip and 15 frames extra at the beginning of the 2nd clip in order for the dissolve to work.
    Try trimming the beginnings and ends of all the clips in your timeline, and then apply your transitions.
    Andy

  • Labels do not apply on PSD and PNG files

    We have just started using Bridge CS3 at work. It seems we can't apply labels to PNG and PSD files.
    Is this a known thing with Bridge, and can it be fixed?
    As it's unlikely we'll be able to patch Bridge, as our IT department doesn't like that sort of thing, are there any potential workarounds?
    I only have Indesign CS3 and Bridge CS3 installed on my machine - not other parts of CS3, or earlier versions of the software.
    In advance, thanks for your replies.
    - Richard
    Mac OS 10.4.11
    Dual 1.8GHz PowerPC G5
    3GB RAM
    Adobe Bridge CS3 2.1.1.9
    Adobe Indesign CS3 5.0.2

    Don't know about PNG's, don't have them but PSD do label fine, rating stars as well as assigning color to it.
    If you have the files on your own workstation and not on a network folder and they are also not locked they should just accept labels I would think.
    2.1.1.9 is the latest version so there is nothing to 'patch', but you should try a purge cache for folder option using the tools menu.
    If still not able then refresh preferences with holding down option key while restarting Bridge and choose refresh preferences, after restarting Bridge reset prefs to your needs, restart Bridge again and try if you are able to label the files.

  • I can not synchronize data from the prelude livelog

    I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
    The Prelude can not apply metadata in it.
    please can someone help me

    Hi -
    When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
    We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
    Michael

  • Can't Apply Styles

    I have a working Pages doc. There is a ton of info in a word doc I need to include. When I copy paste it into Pages, I then can not apply styles from the style drawer. What is that all about? Is there some way to be able to apply styles to info I paste? I dropped word because it displays ridiculous behavior like this. Is pages just as much of a useless time waster? Any help would be appreciated I'm extremely frustrated. Who has time for this kind of annoyance?!?!?!

    You have to select the text you want to use a style on.
    For more information on Styles download the Pages User Guide. It is downloadable from your Pages Help menu.

Maybe you are looking for

  • Game Download gone

    I amde a download this week from App Store (via Iphone) and downloaded (after payment) Monopoly and Crash Kart bandit When I sync this up with my computer, and then unplug this the games do not open up / cant play- Do you know why? L

  • MIRO Error - plant 1000.

    Dear Friends, The user got this error when trying to post the miro " You have no authorization to enter an incoming invoice in plant 1000". I gave him the solution that Plant 1000 does not belong to Company code 1000. He has written that he did not e

  • Remove Entry from Array

    Hi,just another question. Is it possible to remove an entry inside an Array without splitting up by using SubSet und with a combine after that? I found no function for that way...RegardsHenrik

  • Where are iBooks stored on my iMac?

    I see them just fine -- but wonder where they are stored.

  • What do you think of the new iPhone 5 connector to existing docks?

    I have 100's of dollars of sound docks, alarm clocks, charging stations, etc. designed to accept the 30-pin connector. The adaptor offered by Apple for the new iPhone 5 8-pin connector does not appear to provide a satisfactory connection in terms of