Can not boot after the last upgrade [solved]

Hi all,
I upgraded my system this morning, but when loading I get the following error:
ata2.01: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: failed to recover some devices, retrying in 5 seconds
It says so for 3 times, then continues and ends with a kernel panic.
Any idea what might have gone wrong?
Best regards,
Jan

Hi again,
Thanks to good guys on IRC, my problem is a sort of solved. The solution was basically to go back to the old IDE subsystem on my Intel box and wait until the kernel and the respective modules get more stable before trying the transition again. More precisely, I did the following:
1) in /etc/mkinitcpio.conf removed pata, sata and scsi hooks and put back the ide hook (and then of course ran mkinitcpio again);
2) in /etc/rc.conf blacklisted ata_piix and ata_generic;
3) in /etc/fstab and /boot/grub/menu.lst changed the device names back from /dev/sda* to /dev/hda*.
I hope there will be some announcement on Arch website when it will make sense to try the new system again.
Thanks to everyone who helped to sort this trouble out,
Jan

Similar Messages

The license for Win10 after the last upgrade to 10049 is still valid up to April 15th and not to October 15th

I installed the first preview of Win10. Which would be valid for up to April 15th. After the last upgrade the preview screen shows build 10049. Valid up to October 15th. But Windows is not activated. I tried to activate. Response: wrong key. (...-9D6T9).I
tried to change the key with the new one given in the nowadays downloading pages (...-233PK) Response: this key is not valid for the version is installed. So do I have to download the whole setup again and reinstall it to my pc?

There are only 2 product keys..........
For Pro ( non-Enterprise ) version it is : NKJFK-GPHP7-G8C3J-P6JXR-HQRJR
For Enterprise version it is : PBHCJ-Q2NYD-2PX34-T2TD6-233PK
Look to the bottom right of the screen it tells you which version you have........

Weird problem after the last upgrade(10.4.8)

Hello all,
I am using a 1.66mhz MacMini with intelcoreduo. After the last upgrade
2weeks ago. I begun to encounter weird behaviors(those does not happen
all the time, but happens..) from my mac. I'll try to list those
behaviors below:
- trash can sometime can not empty, I have to open the thrashbin and
delete manaually by selecting each file to delete
-finder failing to open a new window.
- when i take screenshot, it only appears when i try to find it over spotlight
- and worst of them all, recent files downloaded on my desktop disappearing sometimes and only way to reach them ise search on finder, when spotlight finds it, it appears back again).
These are all so weird kinda behaviors. I am curious if any of you
having the same problems, or rather these problems has been allready
pointed.
Kind Regards,
alper,

I've seen some of those before but on a G4 Tower, so far never on my Intel Mac Mini.
I've seen screenshots not appear on the desktop until much later or when a new file is brought or created on the desktop. Likewise, I've seen the same behaviour with some files I've downloaded (to a specific downloads folder).
I remember stuffit 9 or 10 had a bug similar to this where when you expanded a an archive it was "empty" until you moved a new file into the folder or made a new file/folder in it, then it would show you the files that were actually in the expanded archive.
Try repairing your permissions and booting from your Mac OS X install disc and running disk repair.

The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu

PROVA

Yes, I know that, but I ever work with the right mouse button,
because selecting groups and subgroups with double click make some confusion for me.
Regards,
Fabio
ufficio tecnico
grafica e prestampa
Via Verdi, 11 - 43058 Sorbolo (PR)
Tel. 0521.694111 - Fax 0521.694360
E-mail: [email protected] <mailto:[email protected]>
E-mail: [email protected] <mailto:[email protected]>
Web: www.litoexpress.it <http://www.litoexpress.it/>
Il giorno 28/ott/2014, alle ore 06:57, Satinder S Bains <[email protected]> ha scritto:
The multi level "isolation mode" don't work after the last upgrading to Illustrator CC 18.1.0? by the right mouse button menu
created by Satinder S Bains <https://forums.adobe.com/people/SatinderSBains> in Illustrator - View the full discussion <https://forums.adobe.com/message/6874053#6874053>
You can double click on the selected object to get into the multilevel isolation mode.
Regards,
Satinder
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6874053#6874053
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Illustrator by email <mailto:[email protected]m> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=33 67>
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0 <http://forums.adobe.com/thread/416458?tstart=0>.

Material availability date can not be after the delivery date

Dear Experts,
we are using the following scnario,
1. Once the user creates the sales order, automatically system creates PO in the background.
we have created Bapi program for creation of Background PO in SD User Exit.
The following issue occurs in Prd, DS1, QS1 server, We have done Technical upgradation project, Now when we creates sales order automatically po created with error message of Material availablity date can not be after the delivery date. even sales order no also not updated in the PO.
QAS server (without technical upgrade) i refered the same input parameter and used the same and create the sales order system generates PO automatically without error message.
Does any one can through lights on this issue,
Thanks and Best Regards,
Muralidharan S

Hi
The dates are determined due to shipping and transportation scheduling settings. So check whether the shipping and transportation scheduling is being performed as per the cofiguration settings after Technical upgrade. Since the MAD date should not be after Delivery date but it seems that the dates are not determined properly.
Also check the Transit time, Loading time, Pick/Pack time and Lead time are retained as same as before the technical upgrade. Use the QAS server settings to validate the settings in other servers.
Regards
Rajkumar K

Why MLB.TV is not appearing after the last update?

why MLB.TV is not appearing after the last update?

Make sure the store is set to the US.. Also restart the ATV.

I cannot get Apple to send verification email for Icloud after the last upgrade

I cannot get ICloud to work after the last upgrade on iphoto?

explain the crash... perhaps recovery might be more useful than new settings.
what is wrong with these settings https://autoconfig.thunderbird.net/v1.1/mindspring.com

After the last upgrade of OS X Mountain Lion I can't seem to adjust screen brightness anymore. Why and how do I solve this?

My screen brightness used to adjust itself and if not I could use f1 and f2 keys. After my last upgrade of OSX Mountain Lion, these do not seem to work. Does somebody know what happened and how I can return to the original situation?

Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting your Mac's PRAM and NVRAM
http://support.apple.com/kb/ht1379

[SOLVED] Can not boot after mishap with clonezilla

Hi
I was trying to back up my computer with Clonezilla. It kept telling me that the drive I was trying to back up (the only hard drive in my laptop and only has Arch Linux installed on it) had a GPT and MBR partition table. I thought that this was odd so booted back into Arch Linux and loaded up gparted and it said that the drive was MBR. So I ran clonezilla again and it said about a command to run to remove the GPT if you are sure that you are using MBR so I went ahead (stupidly) and ran it thinking that everything would be ok and now I can not boot back into my Arch Linux. I just get a black screen with GRUB and a flashing cursor. I think the command that I ran was either:
gdisk -z /dev/sda
or
sdisk -z /dev/sda
I'm not too sure and I should have written it down or researched it first. (That will teach me.) I have booted the computer from a Knoppix DVD and can see all the partitions on the drive (root, swap and home) and also read all the data. I have tried to reinstall grub (install-grub /dev/sda deom the Arch install cd) but this has not worked. I hope that as will most things Linux I can fix this. Please can you point me in direction I need to go to fix this?
Thanks
Robert
Last edited by toca180 (2012-02-25 17:20:11)

Hi
I have fixed it. I ran testdisk from Knoppix and let it write out the partition table again as MBR then reinstalled grub from the Arch Linux install CD by doing the following from with in grub:
root (hd0,0)
setup (hd0)
Lesson learnt. I'll read and research before just blindly running commands again. Thank you all for reading.
Thanks
Robert

Problems with GNOME After The Last Upgrade

I have too many problems these days with my Arch box.. And I don't know when or how these problems are solved but I'm really bored about having problem all the time. I don't know all of these are bugs but if they're I'm ready to enter some bug reports.
1) After the last update, Metacity doesn't start automatically. So everytime, I don't have my mouse theme, my thema of borders of the windows, the notes I took with gnome's note applet doesn't disappear.
2) gnome-power-manager is never the same that I used to.. I just found that killing and rerunning it is at least make it work. But it's menus and options is not rich as I was earlier times. It doesn't say that much as it did in the earlier times.

I've same problem with gnome-power-manager, it works only when i kill it with killall gnome-power-monitor and re-run it.
About metacity i don't have problem with it.

Lighting cables and adapters are not working after the last iOS 7 update.

Looking for some help from Apple here. After the last iOS 7 update, some of my lightning cables and adapters have stopped working.
I have an iPhone 5 funning iOS 7.0.2.
I have a car charger/FM RF transmitter that has worked like a charm for years. Because none of these have been made with a lighting connector, I've had a genuine Apple adapter on it since I bought my iPhone 5 a year ago. Never had a problem until the last iOS update. Now when I plug it in, not connection is registered. I've verified the charger is working by removing the adapter and plugging the old iPhone connecting into an iPhone 4 running iOS 6. I've also verified the adapter is working by plugging the charger with adapter into an iPad mini running iOS 6.
I also have a Belkin USB car charger. This came with a black lighting cable. Also worked like a charm until the last update. Now, half the file when I plug it in, no conncetion is registered. The other half of the time, it says this cable is not supported but does not connect my phone or charge it. I've also verified that the cable is working by plugging it into an iPad mini running iOS 6.

I had the same bug. Powering off the phone and back on resolved the issue

After the last Itunes update I have been getting runtime errors R6034 now Itunes will not launch,, after the last Itunes update I have been getting runtime errors R6034 now Itunes will not launch

After the last itunes updatei am getting runtime errors R6034 my OS is windows vista
I have uninstalled and reinstalled Itunes several times

Hello, Desfromnotts.
Thank you for the question. Try uninstalling all components of iTunes in the order specified of the article below. Once this is done attempt to install iTunes again.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
You may need to process the steps in the article below for each component when uninstalling iTunes if the issue persists.
"The feature you are trying to use is on a network resource that is unavailable" alert when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

After the last upgrade, my firefox will not open. Task manager says it is running, but I get nothing.

I finally allowed the last update to run... upon completion, my browser window would not open. I rebooted, got the window to open but had no function on the navigation bar. The only way I could navigate the web was to go to my home page, google, search for the web page and click on the results. Refresh also would not work. I did another reboot and now I'm back to no visual evidence of the browser window being open. It seems like every update for the past few months crashes my ability to utilize my add-ons and my ability to see video is almost always compromised. I try to ignore updates but the reminder keeps popping up so frequently it becomes a nusiance and I cave to the pressure!

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.org/kb/Firefox+hangs

Phone not working after the software upgrade

I performed the software upgrade as indicated by the phone in the notifications.
One the phone rebooted, I proceeded to enter my email accounts and it froze on a white screen with a spinning wheel.
I rebooted and it continued to freeze.
I took the battery out, rebooted, still can't add email accounts. It freezes in the setting section. I actually can't change any settings.
If I reply to a text, the screen freezes black.
If I try to reply to an email, the screen says, "Could not display this message"
I have wiped it three times, powered off a billion times and still keeps freezing. The update has been nothing but grief.
Any advice??

Hello 2canoes and welcome to the BlackBerry Support Community Forums.
Sorry to hear you're experiencing issues with your device after updating your software.
It's recommended you contact your mobile service provider for investigation on this matter and to open a support ticket with BlackBerry technical support.
Thanks!
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

OS will not boot after Snow Leopard Upgrade

I have a MacPro (Intel). I just upgraded to Snow Leopard and everything appeared fine. However, after restarting my computer the OS will not load. A circle with a hash through it replaces the Apple logo and the apple's spinning wheel continues but all drive activity. I have tried to run the install again by forcing the computer to open the dvd drive then booting for the OS DVD but this has not worked. Has anyone experienced this and successfully resolved?

You have a five year old computer, so a failing hard drive at this point is not so strange. You have a couple of options you can try. Start with this one, but if it does not work you will have to erase the hard drive. I hope you have a backup of all your files.
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Can not boot after the last upgrade [solved]

Similar Messages

Maybe you are looking for