Can not burn a Blu-ray disc

The problem: Can not burn a Blu-ray disc.
I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”. I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems. I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works. The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's. Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc? Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements. I assumed I have to do the same thing with a Blu-ray too. I've tried following this procedure, also tried using the live file system. Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting. One suggestion has been that another program is interfering with premiere elements. I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
I Have a lot of great suggestions from you guys and I really appreciate it. I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system. I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements. I appreciate the input regarding Cyberlink software. I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1. Time is money, the cost of a new Blu-ray burner is insignificant. I will consider this option later.

Similar Messages

I want to burn a blu ray disc from PP CC 2014 and do not have the Encore application. Is there a way to do that?

I want to burn a blu ray disc from PP CC 2014 and do not have the Encore application. Is there a way to do that?

Here's a free non-Adobe solution as well. It's definitely got a steep learning curve compared to Encore, but from my understanding so far, it may also be more capable. (And it's still being developed, unlike Encore which is dead software.)
Easy BD Authoring, Blu-ray Authoring and Reauthoring | DVDLogic Software

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

How I can burn a Blu ray disc in my mac?

Hello,
I´m worried cause I don´t know how burn a Bluy ray
But before, how can I do the menus?
nickeditor

You cannot use DVD SP to burn a Blu-Ray disc. But you can use the latest version of FCP to create Blu-Ray discs. There is a tutorial here;
http://www.kenstone.net/fcphomepage/burn_br_mac_superdrivestone.html

ENCORE CS6 gives error message during the burning of Blu-ray Disc

I did it again - upgraded my Production Premium CS5 to CS6.
I will not forget CS4 that never came to work. It was not a workable version, but at best an Alfa or maybe Beta version.
I was therefore naturally afraid to upgrade my reasonably well functioning CS5 version, but did it anyway.
My fears kept unfortunately connectors. Audition CS6 scratchy and crunches a lot when I change Audio Device from MME to ASIO. It should be noted, that none of my other programs have this problem neither my Soundbooth nor Audition 5.5 which I fortunately still have installed. So it is only Audition CS6 that crunches with ASIO4ALL.
Encore CS6 is also a problem child. When I try to burn a Blu-ray Disc I get, in the final phase, following error message: Blu-ray Error: "device error", Code: "CreateStcSequence: Fail to write M2S file"
Fortunately, I can open the project file in my Encore CS5, which do not have the same problem. Encore CS6 cannot be used as a standalone application - I still need to have a previous version installed to complete my projects. It is not fair.
Unfortunately I can see that many others have the same problem. Even worse, however, that Adobe still has not come with an update or fair solution of the problem - after so long.
It annoys me infinitely, I every time have to spend so much time on the Internet in an attempt to find solutions to remedy Adobe problems. These are programs I have paid dearly for - exactly twice as much as others living in the U.S. pay - just because I live in Europe.
If there is a user who has some useful suggestions I would appreciate it very much.
I must complain about my bad English.
Thank you in advance.

Hi Jim,
ISO files also works for me, but that's not what I paid for.
So far I use just the previous version CS5, but hope at some point to get CS6 to work.

Has anyone burned 1080p blu-ray discs using Final Cut Pro alone?

I am in the market for a new computer. Currently I am a PC user who has burned Blu-Ray discs using Pinnacle. I am dissatisfied with that software because it hangs and crashes at critical moments in the rendering and burn process. I am considering switching to Mac but will only do so if I can burn true Blu-Ray movies which are playable in an ordinary Blu-Ray player.
I have read some of the discussions on this board and it is not clear to me whether it is yet possible to burn 1080p Blu-Ray discs playable on any Blu-Ray player using Final Cut Pro alone. Can someone confirm for me whether they have done this? Some users have indicated they can only output 720p using Final Cut Pro (which is not very satisfying). Others have indicated it is necessary to use Adobe Encore. If you have to use Adobe Encore to burn, why use Final Cut Pro at all? Why not use Adobe Premier Pro for editing and Encore for burning?

David S. wrote:
And yes you can author single track 1080p blu ray discs with Compressor 3.5.
But that's not what the OP asked, "using FCP alone."
Why not use Adobe Premier Pro for editing and Encore for burning?
Well, why not just put CS4 on your PC, especially considering you already have the BD hardware?
There is no truth to the rumor that applications running on Macintosh are any more stable than the same apps a PC; all systems crash.
bogiesan

Enocore CS5 error when trying to burn to blue ray disc

My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?

Enocore CS5 error when trying to burn to blue ray disc
My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?
I went to the original motion menu source and saved it as Microsoft AVI (file name: Premiere pro avi for menu.avi) instead of AVCHD hoping that might help and then brought that file into Encore and linked that as the motion video for the top menu (the other menus don't have a motion background). I tried to animate the buttons for all the menu pages. When I click on the Premiere Pro avi for menu.avi asset the options show for DVD Transcode automatic and for Blu Ray Automatic (for transcoding). The file shows as 720X576 and it is 34 seconds long. The top menu is checked to animate buttons and I can uncheck it if I want, the submenus-start at page 1- have the animate buttons grayed out but checked and I can't uncheck these even if I wanted to. When I tried to burn this to disc, it got further along- burning 13.15 gb to disc and then I got the following error message:
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time = 1321.253267 seconds-
I am running Windows 7 64 bit, 2.4 ghz processor Quad core, 6 gb of memory and 69.1 gb free on my external hard drive and 29.7 gb free on my c drive. I have an NVIDIA GE force 8500T card. Any ideas?

Can I burn a Blu-Ray movie on an Imac?

I'm aware of the issues involving Blu-Ray playback on Mac.....my question is simple though:
If I use Final Cut to make a blu-ray movie and purchase an external blu-ray burner, can I make a blu-ray video disk for playback on a blu-ray player hooked up to a television?
Any help would be appreciated. Thank you!

OWC's hardware product descriptions, for example
http://eshop.macsales.com/item/Other%20World%20Computing/MRF8BDSD8X/
says that you can. However, current Apple software cannot burn to Blu-ray discs. Third-party software, such as Toast 10
http://www.roxio.com/enu/products/toast/titanium/overview.html
should be able to burn to Blu-ray discs. I am not sure if this capability is just for burning data discs, or if it can create Blu-ray movie discs.

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

I am trying to burn a blu ray disc, it keeps saying File uploading error after 33%. Anyone know the answer?

Could you take a screen shot of the error message and post it?
Can you export a master file OK?
Russ

How do I burn a Blu-Ray disc with menus?

I have a 38 minute project comprised mostly of HD clips (.m2ts, .MP4 and a few .MPG). I try to render the project to Blu-Ray with Premiere Elements 12, it takes approximately an hour to reach 98% with message "Encoding Media", then switches to "Compiling Media" and freezes there (I let it go for 6 hours with no end in sight). Task Manager shows that it is not using any CPU cycles anymore, while it was using up to 96% of the CPU before it reached that point. I've been able to render this project to a DVD, to Folders on my HDD and to AVCHD successfully on a DVD.
For a test, I tried a 1 minute project with the same results. It wasn't until I removed the disc menu that I was able to burn a Blu-Ray disc. I am running project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x4 635 Processor, 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM. I have found a number of references to the 98% completion but no real solutions. Any assistance would be appreciated as I would like to produce a high definition disc with menus...

ATR and jerry9146, thanks for the replies. I am using version 12 of Premiere and, when I attempt to update, it tells me that I have the latest version. I am fairly new to Premiere although I have used other video software before. My motherboard supports up to 16 GB (4 slots) so I could try increasing the memory which would probably speed up the rendering process. I'm not so sure that not having enough memory would prevent it from completing the rendering process but who knows. Task Manager shows CPU usage in the high 90% and shows physical memory in the mid 50% during the rendering process...
My software always finds the media and lets me know if I have the wrong disc in (I had inadvertently inserted a DVD instead). I have tried both H.264 1440x1080i NTSC Dolby and H.264 1920x1080i NTSC Dolby. It does not have a choice for 1080p full HD.
I always cancel out of the Windows popup asking "How do you want to use this disc?" as I assume that Premiere will let the system know. Is that correct?
The movie menu that I chose for this project is a fairly simple one, Faux Widescreen from the General category. It contains 1 main menu and 3 scene menu pages containing a total of 17 scene markers which I inserted myself with Add Marker.
I had already taken out the Stop marker as I had read that it doesn't work for Blu-Ray anyways (and thought that that might have been the culprit). Spacing is good and there is no button overlap.
jerry9146, I have successfully burned an AVCHD file to a DVD thru Premiere and the quality is pretty good. Does the workaround that you suggest produce a Blu-Ray quality file?

HT200139 ?How can i watch a blu-ray disc with my iMac

I accindentally bought a blu-ray, ok, but now I see it... How can i match a blu-ray disc with iMac?

Youneed some bluray software such as this:
http://www.macblurayplayer.com
I use and it seems OK, plays a wide variety of formats.
Al

Once and for all: Can DVD SP build Blu-Ray disc content or not?

Maybe I’m crazy, but…
Everything I’ve heard to date has Apple backing the Blu-Ray format. Believing this, I just spent $900 on a new Lacie D2 external Blu-Ray burner (which IS Mac compatible). I also purchased Toast 8 (which IS Blu-Ray compatible).
All I need to do now is build my disc content (assign H.264 1920x1080 content, build menus, etc.) then drop it all into Toast and burn Blu-Ray video discs… right?
So what is all this I’m reading here about DVD Studio Pro supporting the HD DVD format and not Blu-Ray???!!!!!!
Am I going to be able to do this using DVD SP or not, and if not, can anybody tell me a program I can use to build my Blue-Ray disc content? (All of my HD content is H.264 (1920x1080) rendered directly from Adobe After Effects).
My deadline for this project is fast approaching and I’m hoping somebody can shed some light on this. If I can build Blu-Ray discs and burn them on my Mac using Toast 8 and the Lacie D2, I’ll make my deadline and justify the $900 spent thus far.
Can anybody help?
Thanks, SM

Wait a minute,
Maybe I don’t need to buy PC to run DVDit Pro HD. I have a Mac Pro! With Boot camp I have a PC! Any reason I shouldn’t try running DVDit on my Mac via the Boot Camp beta? That way I'd also be using my Lacie D2 Bu-Ray drive. And with Roxio's 30 day return policy I haven’t much to loose...
I'm calling Roxio tech support. Let you know how it goes
Sark
Message was edited by: sarkmachine
A LITTLE LATER:
Just got back from digging into Roxio's discussion forum and here's what I found:
I have travelled down the same frustrating path my friend!
But I did succeed doing it all on my new mac Pro, finally...
Install BOOTCAMP (free beta). Install WINDOWS XP ($269 from AMAZON). Install ULEAD BD RECORDER, which comes with DVD MOVIEFACTORY 6 (free trial, $80 to buy).
BDAV worked well from SONY V1-U burning to MATSHITA BD-MLT SW-5582 and played perfectly in new SAMSUNG 1200 palyer on my 57" DLP.
TIP - install BOOTCAMP et al on its own HD, and use NTFS... This will come in handy when doing a BDAV from a file such as HDV1080 that is larger than 4GB.
To do BDMV, you'll need SONIC DVD-IT PRO HD ($499) which I have yet to try...
Frustrating process, but kinda cool to figure it all out, especially when NOBODY in sales at any of these places seems to have a clue.
So there you go - must be possible
Sark

Premiere elements 11 burn to blu ray disc, no time code??

Hello.
Premiere element 11 burn to bluray disc have no time code when play at blu ray player.
and can not duplicated. ( Pro duplicator bluray)

trucvovi
When was there ever?
On what computer operating system is your Premiere Elements running on? If Windows, then please read on....
Some have used the DVDate plug-in to apply a timecode to the Timeline content prior to burn to.
http://dvdate.ru/
Please see Premiere Elements 12 Daily Discoveries/0014 DV Date Plug-In in Premiere Elements 12
http://atr935.blogspot.com/2013/09/pe12-daily-discoveries.html
for full information which applies to Premiere Elements 11 as well.
You should be able to copy your homemade Premiere Elements Blu-ray disc format on Blu-ray disc
using the burn software that came with the burner.
Any questions or need clarification, please let us know. The answers will be in the details.
Thank you.
ATR

Adobe Premier Elements 12 - Exporting trimmed AVCHD files from the project timeline, to a separate folder for burning to Blu Ray disc with other software?

Hi, can anyone help please. This is the first time I have used this forum.
I use Premier Elements 12, a PC, 64 Bit, Windows 7, high powered computer.
Just started trimming AVCHD in this software.
I would like to know if it is possible to export trimmed AVCHD files to a folder elsewhere (files which were originally imported into the project timeline), so that I can burn the trimmed AVCHD files (not in 'Project' form) to Blu Ray disc (using another software which I know that works to burn video files to Blu Ray disc).

Kathy
Thanks for the update. Your progress sounds very good.
Premiere Elements 11, 12, and 13 are similar. But, version 13 has significant feature removals and a new Elements Organizer.
So, when viewing or reading tutorials, try to determine the version of the program being used for the tutorials. As I typically write
principles tend to remain the same from version to version, but the features tend to move, change, or be discontinued from version
to version. And, it is frustrating to be armed with principles when you cannot find a feature.
Some Comprehensive Free Resources for version 12.....
http://tv.adobe.com/show/learn-premiere-elements-12/
http://help.adobe.com/archive/en/premiere-elements/12/premiere-elements_reference.pdf
http://help.adobe.com/archive/en/elements-organizer/12/elements-organizer_reference.pdf
ATR Premiere Elements Troubleshooting: Premiere Elements 12 First Look Details
ATR Premiere Elements Troubleshooting: Premiere Elements 12 Daily Discoveries
Please do not hesitate to ask if questions or need clarification.
Best wishes
ATR

Premiere Elements 12 does not recognize blank Blu-ray disc.

I just upgraded from Premiere Elements 8 to PRE12. Now when I insert a blank Blu-ray disc in the BR burner, I get a message "Media Not Present". It does recognize the burner, but not the blank disc. Yet when I open PRE 8, PRE 8 does recognize this very same disc in the same burner! Also, PRE 12 can burn a blank DVD in this same burner. The Blu-ray disc also appears as a completely blank in Windows File Explorer. And this is a problem even after updating to release 12.1. The Adobe chat representative tells me this is a know issue with PRE12. I find that difficult to accept, since why would Adobe change in PRE 12 something that was not broken? What's the truth, and when and how can it be fixed?

First, I tried uninstalling, register cleaning and reinstalling Premiere Elements. This was a mess. I kept getting error messages when trying to reinstall. So I had to do a system restore to just before I uninstalled PRE. After that restore, PRE would not open. So I did another uninstall from Control Panel and reinstall, without touching the registry. Then, I was back in operation, several frustrating hours later. But still the BR drive would not recognize Blu-ray discs.
So then I loaded a BR-RE disc, instead of a BR-R, and still no recognition.
Then I installed the external Blu-ray burner, and finally PRE12 recognized the blank Blu-ray disc. I had a sign that this would work when I attached an external DVD drive to burn a AVCHD file, and PRE12 recognized the blank media, whereas it did not recognize any blank DVDs in the internal BR drive for burning AVCHD files. As a alternative to borrowing an external BR drive to see if this fixes the Media not Present message, I suggest using a much more readily available external DVD drive and try to burn a AVCHD file first. If that works, then one can be much more confident that purchasing an external Blu-ray drive will provide the solution.
Yet I deeply resent having to purchase a $125 piece of hardware, which is otherwise useless to me, to fix a bug in a program. The box promises the ability to export a Blu-ray disc. Since their lawyers use the weasel word "compatible" Blu-ray burner required, I fully expect them to take the position that now only an external burner is "compatible", and do nothing to fix the compatibility with internal burners. Potential buyers be forewarned!
As an alternative to paying more money to make their software work as indicted on the box, one might want to settle for only being able to write AVCHD files to a DVD. Most every computer (except Ultrabooks) has an internal DVD burner, which supposedly all that would be needed to burn this kind of HD file. But first, we all need to know, will PRE12 return a Media not Present message when burning a AVCHD file to an internal DVD burner? What are the field reports of any problems incurred doing this procedure? Please advise.
And one more question. When I burn an AVCHD file to a DVD, the DVD is not finalizied by PRE12. After burning the AVCHD file, the DVD shows free space available, but after burning a DVD Video, there is no free space available. Moreover, ImgBurn does finalize DVDs after burning AVCHD files to them. So Is this failure by PRE12 to finalize another bug? Can ImgBurn now finalize an unfinalizied AVCHD disc left by PRE12 -- without having to run another session of PRE to burn to a folder now, of course? If so, how?

Can not burn a Blu-ray disc

Similar Messages

Maybe you are looking for