Can not burn to disc

I am trying to burn a disc from my playlist. It h=asks for a blank cd and once this is in it comes up with checking media - then nothing happens???

I had the same problem with blank CDs after burning a playlist on iTunes 7.2.0.34.
I just downloaded and installed the latest version 7.2.0.35 from the Apple website (not through iTunes "check for updates" which said "7.2 was the latest") and now everything seems to be in order and the CD burning works.
Good Luck!

Similar Messages

Can not burn a disc with I tunes

I can not burn a disc with I tunes any more , I updated the soft wear have use several new disc but get the same results(attempt to burn disc failed errorr #4280) I can burn disc using Microsoft Media player
Thanks

Have you tried a Cleaner CD yet?
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

I can not burn CD's with my Itunes anymore. It tells me I am missing CD burner and to re download ITunes. I have done that and it stills does not work. Every time I try, Disc Recorder not found keeps coming up! Please someone help me!!!

I can not burn a CD with my itunes anymore. It tells me to re download itunes. I have done that and still have the same problem. When I do try, Missing disc recorder keeps coming up. Please help!!!!

Hello again, Stew.
Also when I open itunes it gives me a warning and says "The registry settings used by the itunes drivers for importingand burning cd's and dvds are missing. Please reinstall itunes."
With that one let's first try a reboot and repair.
Reboot the PC (very important), and the do a *repair install* of iTunes.
Go to your "Add or Remove Programs" control panel, select iTunes, click "Change" and then click "Repair".
Does iTunes launch without the error message now?
If no luck there, try checking for a device filter conflict in your registry:
iTunes for Windows XP: Troubleshooting CD issues caused by device filters

I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

I have Windows XP, and when trying to burn an iTunes playlist to an Audio CD, I get a message saying "Disc burner or Software not found". I have re-installed the latest version of iTunes, but I still can't burn to disc. Any suggestions?

Try HT203242: iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install.
tt2

Can not burn a Blu-ray disc

The problem: Can not burn a Blu-ray disc.
I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”. I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems. I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works. The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's. Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc? Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements. I assumed I have to do the same thing with a Blu-ray too. I've tried following this procedure, also tried using the live file system. Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting. One suggestion has been that another program is interfering with premiere elements. I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
I Have a lot of great suggestions from you guys and I really appreciate it. I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system. I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements. I appreciate the input regarding Cyberlink software. I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1. Time is money, the cost of a new Blu-ray burner is insignificant. I will consider this option later.

Can't Burn a Disc

I can't burn a disc in my user account. I get this error: you do not have enough access priviledges to burn disc.. even though the privelledge seems to be set to allow this. Any ideas?

Have you tried repairing disk permissions? Utilities>Disk Utility, select Macintosh HD and click 'repair disk permissions'.

I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

I just got my Mac back from Apple repair and I can't burn a disc. What do I need to do to make that happen?

Hello deneye2112,
Thank you for providing the details of the burning issue you are experiencing. I found some resources that I think might help:
First, I recommend resetting the System Management Controller (SMC) on your Mac (I wasn't sure if you had a removable battery or a built in battery, so I listed the steps for both):
Resetting the SMC on Mac portables with a battery you can remove
Note: Learn about removing the battery on MacBook and MacBook Pro.
Shut down the computer.
Disconnect the MagSafe power adapter from the computer, if it's connected.
Remove the battery.
Press and hold the power button for 5 seconds.
Release the power button.
Reconnect the battery and MagSafe power adapter.
Press the power button to turn on the computer.
Resetting the SMC on portables with a battery you should not remove on your ownNote: Portable computers that have a battery you should not remove on your own include MacBook Pro (Early 2009) and later, all models of MacBook Air, and MacBook (Late 2009).
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you are still having trouble with burning after that step, I recommend reviewing the section titled "Top troubleshooting tips" in the following article:
Disc Burning Quick Assist
http://support.apple.com/kb/HT1152
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

I can't burn a disc from I work'08

I can't burn a disc so I can make a slide show.

Hello Sonni,
It sounds like you are unable to burn a disc with iTunes due to this error code. I would first use the following article to check issues with the type of disc drive:
Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error
http://support.apple.com/kb/ta38101
If this is not the case, use the following article to help troubleshoot the issue:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Cheers,
Sterling

I can't burn a disc from Itunes without getting error 4280 repeatedly.

I can't burn a disc from Itunes without getting error 4280 repeatedly. I was just able to burn a CD and now can't burn another. Any thoughts? I know my CD burner works as I just made a disc. I have tried changing file type from Audio to MP3 with no luck. Thanks for trying to help me.

Hello Sonni,
It sounds like you are unable to burn a disc with iTunes due to this error code. I would first use the following article to check issues with the type of disc drive:
Burning disc in iTunes for Windows using a Sony CD-RW/DVD CRX830E model drive fails with 4280 error
http://support.apple.com/kb/ta38101
If this is not the case, use the following article to help troubleshoot the issue:
iTunes for Windows: Additional troubleshooting tips for burning issues
http://support.apple.com/kb/TS1374
Thank you for using Apple Support Communities.
Cheers,
Sterling

New problem. I can not burn a playlist to disk.

New problem. I can not burn a playlist to disk. The 'checking playlist' now takes about one second, looks very much like a malfunction here. Seems to initialize the disk - them moves straight into 'burning/finalizing disk' which also takes about one second. Then 'burning - finishing disk takes a little longer -
Error reading is "The attempt to burn a disc failed. The disk drive didn't respond properly an can't recover.'
This happend once before a while back and I thought it was 'too skinny disks'. Using 'printable disks; seemed to fix the problem - until now.
Blank cd's can be opened in the finder and files burnt to them.
DVD's can be burned from DVD Pro.
Music cd's and dvd's can be played.
Just can't burn the itunes playlist.

lewelew
From your iMac? OS 10.9.2? iTunes? Other? please give as much info as you can about your system hardware and peripherals, OS, software, etc. Is this misbehavior new? First try? You get the idea, too much info is not possible.
CCC

My iDvd will not burn a disc...there is an encoding error that comes up after the title screen

Like it says in the title...My iDvd will not burn a disc...there is an encoding error that comes up after the title screen.
Here is the process that I have been doing.
1. put in a blank disk and with the project already being done, i hit burn (not too hard).
2. iDvd then starts to encode the title.
3. After the title has been encoded, the burning stops and a message comes up saying "there was an error during encoding" and when ever I try to burn the same message keeps on coming up.
I am running version 7.0.4
any help would be extremely helpful

Try using this workflow:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image and launch DVD Player and play it. If it plays OK with DVD Player the encoding was good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
Then you can concentrate on the content if you can't create a disk image of the project.
Read these posts by Bengt Wärleby. One of them may have helpful info:
I'm trying to burn an iMovie in iDVD...: Apple Support Communities
I am using idvd and i keep getting the...: Apple Support Communities
encoding video error: Apple Support Communities
OT

Can not burn CD's - Please Help

I have a new Toshiba Lap Top with Vista - can not burn a CD in I-tunes - get the message "CD Burner: no supported disc burner found". I can burn using other software. How do I fix this?

Here is a copy of my cd diognostic...
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation DIM4400
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce2 MX/MX 400 (Microsoft Corporation)\GeForce2 MX/MX 400
IDE\DiskST340016A______________________________3.10___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomLITE-ONLTR-24102M______________________4DS3___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: LITE-ON LTR-24102M, Rev 4DS3
Drive is empty.
The last failed audio CD burn had error code -128(0xffffff80). It happened on drive D: LITE-ON LTR-24102M on -128(0xffffff80) media at speed 0X.

Can not create recovery discs on satellite C875D-S7330

Can not create recovery discs on satellite C875D-S7330. Drive runs and appears to be doing it thing, then aborts saying it has error to check disc for scratch or dust on media. Error code: OEO1B5-26-2AO3OC 00 . Tried 3 new discs all same results. Tried a 4th disc trying to continue on with disc 2 of recovery discs, got another error on this one. Error code: 020150-20-00000000.
Anyone have a fix for this? Had this machine less than 24hrs.
Thanks
Don B.

Personally, I would get a 16gig USB thumb drive and put your recovery on it. It eliminates having to swap disks during recovery and it's easy to store. I've used mine several times and it's worked perfectly every time.
L875D-S7232 (Win 8.1)

Mac OS 10.5.8 Can not run install disc

I have Mac OS 10.5.8 on my laptop and i Can not run install disc supplied with my EA4500. How do I set up my router to work with my CableVision modem? I have named the route, and set up password. I see the router from my laptop but can't connect to Internet via modem. When I switch back to my old Linksys router I have Internet connection. Any help would be appreciated thank you. Jeff

Isit the white Snow Leopard Retail disc like the one here? http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard

Since 10.4.4 (10.4.5) - i can not burn Data-DVDs anymore...

System: iMac G4, 1GHz, 1GB RAM, Mac OS X 10.4.5, 4x SuperDrive (SONY DVD RW DW-U10A)
Dear Apple Support,
since Mac OS X 10.4.4 (same with 10.4.5) i can not burn a Data DVD-RW anymore. It is so annoying. I want to burn my backup on a DVD-RW with the Burn Folders in Mac OS X. it is not possible.
The Finder burn dialog hangs at the "ending burning process". It is so annoying.
It's not possible to erase this "half burned" DVD-RW too! So I have here a lot of destroyed DVD-RWs around me...
The burning of DVD-RWs is a problem since 10.4.0 here on my machine. With 10.4.3 it was half o.k. ... But since 10.4.4 (10.4.5) nothing works anymore.
Your product "Mac OS X Tiger" is nearly one year in the market. And burning a Data-DVD is not a exotical thing. It is a essential feature of a Operating System today. So what are you doing in your Test-Labs?
I am sitting here since 1 year with an Operating System from Apple an it doesn't works in the essential features.
Whats about your slogan "It just works"?
What happens with the quality of Apple?
Under 10.3.9 Panther i can burn everything. It absolutly no problem there.
So i don't understand what are you doing with Tiger?
It's so annoying!
Regards
Roessner

Hi,
I've got exactely the same problem and I have no solution at the moment.
Is there someone who could help us, please?
Thanks !
you can reply to : [email protected]

Can not burn to disc

Similar Messages

Maybe you are looking for