Can not burn to dvd or blue ray disk

I've attempted to share a 35 minutters video to use with a blue ray disk, but I continue to get the following message:
The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)
I have OS 10.10.2 and FCPX version 10.1.4.
Thanks in advance,
Buchholz

Thanks, I did check prevent APP Nap, (it was uncheked.
Now it is returning following.
I did remove some movie secuences that I thought may be corrupted.
It seems that we are closing in on the problem.
Thank you in advance.
Buchholz

Similar Messages

Since 10.4.4 (10.4.5) - i can not burn Data-DVDs anymore...

System: iMac G4, 1GHz, 1GB RAM, Mac OS X 10.4.5, 4x SuperDrive (SONY DVD RW DW-U10A)
Dear Apple Support,
since Mac OS X 10.4.4 (same with 10.4.5) i can not burn a Data DVD-RW anymore. It is so annoying. I want to burn my backup on a DVD-RW with the Burn Folders in Mac OS X. it is not possible.
The Finder burn dialog hangs at the "ending burning process". It is so annoying.
It's not possible to erase this "half burned" DVD-RW too! So I have here a lot of destroyed DVD-RWs around me...
The burning of DVD-RWs is a problem since 10.4.0 here on my machine. With 10.4.3 it was half o.k. ... But since 10.4.4 (10.4.5) nothing works anymore.
Your product "Mac OS X Tiger" is nearly one year in the market. And burning a Data-DVD is not a exotical thing. It is a essential feature of a Operating System today. So what are you doing in your Test-Labs?
I am sitting here since 1 year with an Operating System from Apple an it doesn't works in the essential features.
Whats about your slogan "It just works"?
What happens with the quality of Apple?
Under 10.3.9 Panther i can burn everything. It absolutly no problem there.
So i don't understand what are you doing with Tiger?
It's so annoying!
Regards
Roessner

Hi,
I've got exactely the same problem and I have no solution at the moment.
Is there someone who could help us, please?
Thanks !
you can reply to : [email protected]

Can not Burn CD/DVD after update to 10.6.7

Since I have updated to 10.6.7 from 10.6.6, I can't burn a DVD or CD in the Super drive. I switched back to 10.6.6 and everything worked, switching back to 10.6.7, no burning can happen. The burn file locks and would not allow the lock to be removed from the "Get Info" in the file sec. Any solution? please help

Downloaded the Combo Update (other than the one intended for 'early 2011 MBP', and it will not run on this computer. Says something like it is not authorized, or not intended for this computer. Did re-run the update for 'early 2011 MBPs' same result. Was able to solve the font display issue, but not the incorrect icon issue, and FaceTime will not run at all. Says it is not designed for the OS I have on this computer, and will not even start. I have tried to go to the AppStore, just to see if I can download the latest version - no dice. Won't let me download it. Says FT already installed on this computer. Tried deleting FT, and then downloading - same message. ?????

How do I create a wide screen movie in Premiere Elements 7 and burn to DVD or Blue Ray?

I have created a movie using project settings of 16:9 and also filmed in this format. The movie I burned to DVD is not in wide screen. I have requested assistance and given instructions to go through share and select Sony PSP. However this creates a file which is saved to my computer in mpeg-4 format which will not burn to my DVD. I am using a Blue Ray burner which looks as if it will only take MP3. Any suggestions?

I haven't actually done a BluRay yet - waiting to get everything right and,
hopefully, will be able to put more than 1 movie when all is finished!
That's my next challenge. I initially used Share/Disc to burn the DVD with,
I thought, all the settings for widescreen. It has always worked OK in
Pinnacle. When I lodged the problem with tech support they sent me
instructions using the Sony PSP. Interestingly I use a Sony camera, have a
Sony disc burner plus Sony TV and Playstation so you'd think they'd all talk
to each other!!!
Take Care
Jill in Launceston
http://www.jilldearing.blogspot.com/
Are your creating and burning your DVD (or is it a BluRay disc?) from
Premiere Elements by choosing Share/Disc?
If so, it should produce a widescreen disc.
Sometimes DVD players don't automatically read home-burned DVDs as
widescreen and you have to manually switch it. But at the very least the
video should be either letterboxed or stretched.

Can't burn a project to blu-ray using FCPX

I just completed an extensive project on FCPX and can't seem to burn it to an external blu-ray drive (sony VBD-MA1). The project was recorded in AVCHD from my sony camera. The iMac recognizes the blu-ray and it gets about half way through the processing before it gets stuck on 48% completed. Am I missing a step? Do I need additional software to be able to burn the project? The guy at the apple store said I could burn a project straight to a blu-ray without addtional software. Any advice would be appreciated.

Sorry I was mistaken and thinking of my last project that was edited on FCP6 but burned with iDVD.
In DVD Studio Pro you would have to Burn then .img the disc.
In iDVD you can Save As Disc Image. It sounds like this function is in FCPX from Ryan Scott's post and just confirmed in the Online manual:
http://help.apple.com/finalcutpro/mac/10.0/#ver1ff8b381
Depending on the length of your project, disc being used and what size (1/2 layer) could also cause a problem. Only general sticking points I can come across would be corrupt data (clip/song/font) that is hit at a certain point of the project.

I can not burn a DVD-R in my Imac!

Error: The burn to the OPTIARC DVD RW AD-5690H drive failed. The disc drive did not respond enquiry.c and can not recover or retry.

Ffirst and foremost you have to use the very best in blank media, like Maxell, Sony, or one of the many others. Next is the disc burning software you use. Last what is the content, movies, data, or anything it may be. (EXAMPLE) Some users have had issues burning from Microsoft Office Software. More info would surely help.
CHEERS
DON

Photoshop Premiere Elements 12: Can not burn a DVD

It works and said that DVD is burned, but no data are on DVD. I have choosed it with different DVD burners. The function "Burn to a folder" generate two new folders, but if I burn them to DVD the player can not read it. The only possibility to burn it to DVD is in AVCHD format, but no DVD player can resd this. Only BluRay players. I have Windows7 Professional 64 Bit. What I do wrong?

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Newbie: can not burn/build dvd

I can't make my dvd. When I click on Build/Format button and make my dvd, I get this message in my log.
Starting DVD Build A_DVD...
Compiler Initializing...
Precompiling Project A_DVD
Parsing Assets...
No Video or Still Assets found in Track:Slideshow 1
I do not have a slideshow. I don't want one. Please help. Thanks!

Do you have a track called slideshow 1 or is there a slideshow in the slideshow folder in the outline tab?
Does the build stop or continue?
o| TOnyTOny |o

CS5 Encore won't burn m4v on Verbatim Blu-Ray disk?

I have CS5 and Pioneer BD-RW BDR-206 (Firmware 1.04) burner drives and made my first Blu-Ray program in Premiere CS5 and exported it as Blu-Ray format (m4v), but when trying to burn it on my system, Encore CS5 doesn't recognize the blank disk (Verbatim HardCoat BD-R 25GB, 6x) and keeps asking for a disk.
I put in a regular DVD and it recorded to it without problems...but it wasn't Blu-Ray.
What's going on? I must be making a 'simple' mistake somewhere. Thanks for your help.

Hmm... I don't know if it is possible for other software to allow Encore to "see" a drive as DVD but not BluRay, but some reading that may lead to a cure
As well as the below, right click the Encore icon and select Run as Administrator, which is NOT the same thing as running the computer with the Administrator account, and which fixes several "odd" problems... To create a dual layer DVD (or a BluRay?), you MUST have Encore set to use the Run as Administrator option
Run as Administrator http://forums.adobe.com/thread/771202
Odd Errors http://forums.adobe.com/thread/670174
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558
And This Message Thread http://forums.adobe.com/thread/665641
Encore "No Drive" Error http://forums.adobe.com/thread/569230
Things and Software to AVOID when authoring/burning a DVD
Start --> http://forums.adobe.com/thread/608660
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus http://forums.adobe.com/thread/562941
Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc (send the author a PayPal donation if you like his program)

Can't burn a DVD using IDVD nor Disk Utility- first time user-what is wrong

The recording device reported the media error: Power calibration area error. (0x73, 0x03.)
May 13, 2007 8:05pm PDT
IDVD Version 6.0.3
Emac- OS 10.3.9--- in the owner's manual it DOES state my emac can burn DVDs. Is this correct?
I keep getting this error message after about 20 minutes of programming the DVD-- then it ejects with this message:
"The recording device reported the media error: Power calibration area error. (0x73, 0x03.)"
When using the IDVD application to burn my slideshow onto a DVD; Then I contacted Apple Care and I was told to use Disk Utility to burn my DVD in lieu of IDVD not working.
I converted my slideshow into a .dmg format; all was verified successfully. Then I receive this error message when attempting to BURN DVD:
"STOP The device drained its buffer without burn under run protection"
I made a WONDERFUl slideshow-- of only 17 slides-- confirmed I have plenty of room on hard drive and et al on the "disk information". I have attempted since May 7th to get this DVD to burn my slideshow. PLEASE HELP ME!!! I have deadlines-- now it is for Tuesday May 15th. Please alert me to an alternative until I can get my Emac working properly on what I can do to make copies of my slideshow ASAP. Thank you.
Now I looked thru your ERROR message archives and found NONE to match mine. What do these error messages mean-- is my Emac not working? This is first time ever I tried to use IDVD and IMovie and Disk Utility--- so the first impression is VERY VERY VERY bad for Apple's "easy to use for first time customers"....

Well I had to make the copies for my presentation-- so the cheapest I could find in my area was Walgreens-- 39.99 for ONE COPY of a DVD! So I paid $70.00 and the clerk made 4 copies for me;-) So thanks Walgreens!
Now-- my Mac-- I could not find anything on shelves at Walgreens or Office Depot but the FujiFilm I already have... So I now have time to look elsewhere.
I did PRAM my Emac 3 times-- I tried these things also:
1)Saved the IDVD- .dmg format to QuickTime .mov
I uploaded to google video.com or whatever-- they use their own software-- .gvp file and player. All was successful (even now on YouTube-
2) I then made another version in PowerPoint and saved it as an MPEG
Also for below-- I lowered the burn rate upon the 2nd try to 1x-- took one hour or more (I went to get a root canal... then exfoliate... then I came back;-)
Also tried different .mov from the web-- a great whale shark video that was only 49mb. My presentation is 120 mb. So I was just thinking-- make it smaller; burn slower.
3)I did try to burn from IDVD, Disk Utility and then the drag and burn/click method on the desktop-- put a blank DVD in-- drag the .mov icon to the blank DVD -- write a title for the blank DVD- formats it / Drag to trash-- Burn icon comes up/ Clicked it-- waited 20 minutes and received:
"Error: Error occurred while burning the disc. This disc can not be used."
So I put in another blank Fuji DVD-- just in case. Same error message-- so I am hoping it is the DVD itself and not the SuperDrive.
4)Also-- I tried to do audio CD burn-- just to make sure about the drive-- all was successful and I did a back up of my Itunes files-- 6 CDs they burned (they meaning "the Gods of Mac OS" ;-0 My audio CDs are Office Depot CD-R 52X700mb/ So the generic is better for CDs on my Emac that I know;-)
So I will use my weekend to try other DVDs-- and I have the safety net of Apple Care-- but then just realized-- my Extended Care plan is OVER at May 30, 2007!!! I called to ask to EXTEND it further-- I'll pay whatever-- NOPE-- 3 years was max on this contract. So any repairs I have to pay for after May 30th-- ISN'T THAT JUST THE WAY THE WORLD GOES? The DAY after your warranty on AnYTHING-- the thing goes kablooey?
But I still have days left--- and I know of a good Mac Repair person in area-- but it is just so darn difficult to move my desktop Emac (I got the GLASS monitor to save $300 or something) Weight Lifting is what it is-- weighs about 45lbs or more.
But it seems it may be the media I am using if the CD burner is working, right?
I can update-- if you want me to email direct-- just give me a note (my email is listed). Thanks all!!! I just want to impress everyone of how tenacious I am to find that my Emac is FINE-- it is just ME that is warped;-)

DVD OR BLU RAY DISK INTERFACE ADD AUDIO?

IS IT POSSIBLE TO ADD AUDIO TO A BLU-RAY OR DVD DISK INTERFACE WHEN USING FCP X TO CREATE (SHARE) THE PROJECT TO DISK?

Thanks for the info. Tom
A DVD authoring application...
Do you mean a program such as TOAST,
Will Toast crreat Blu-ray and DVDs and allow me to add audio to the interface?

Cannot burn system image to Blu ray disks via LGwh16ns40

First thing it will not write to disk, unless i format the disk. Once formatted the Image program writes to the disk. But issue is when it finishes the first disk (it told me to label it disk 1), it ask for another disk, but writes the same info and asks
to label it again (disk 1). I have an LG WH16NS40 manufatured June 2014. can someone tell me if im doing something wrong?!!

Hi acura1073,
We indeed need more information about your problem so that we can help.
What’s about the “Image program”?
If you have any screenshots, this would be better to understand your situation.
Alex Zhao
TechNet Community Support

Can not create a DVD (It gets green on the lower half of monitor)

Hi, everyone. This is second posting.
I still have a problem when burning the DVD.
Now I am ready to create a DVD.
Then I simulated the project on DVD Studio Pro 4 ,the lower half of the monitor gets green.
And sometimes I can not burn a DVD (can not choose "format") or even I could do it and mount it again , it shows "untitled DVD") Besides the burned DVD also gets green.
My project worked fine on final cut pro.
Did I install This application wrong?
or my Macpro has a problem with itself?
I need help. Please please give me any advise.
Thank you.

Yes, by citations I mean footnotes, or endnotes in this case.
I finally found the vertical ruler, which wasn't showing, but what really solved it for me was turning on invisibles, which let me see what the column breaks were doing. I still don't have the total control I want over the way it looks, but at least the two, two-column sections are separate and above and below the horizontal box. I wish all the citations were below the rule line.
But I was amazed and grateful to find that Word docs would drag and drop into Pages. This is going to be a great tool. I just started with it a few days ago. I will report the non-wrap bug.
Thanks,
Alan

Can not burn a Blu-ray disc

The problem: Can not burn a Blu-ray disc.
I open Premiere Elements 12 and load my project and then go to “publish and share” my project, I select "create Disc – Burn DVD, Blu-ray and AVCHD disc", I select "Blu-ray", the disc location and settings box opens and the “status” setting indicates "Media not present”. I know the Pioneer Blu-ray BDR-2208 drive works properly because I have already published regular DVDs in it and had no problems. I thought perhaps it was a problem with the initializing of the disc whether you choose (Mastered) as opposed to (Live File System). Neither works. I tired Phillips BD-R disc & Memorex BD-RE disc, neither works. The only thing I noticed was the burner location setting is indicating a Pioneer BDR-208M burner rather than a Pioneer BDR-2208 burner. Could this be the problem? Remember that burner will burn regular DVD's. Does Premiere Elements 12 require some other additional software on my computer to burn a Blu-ray disc? Also is there a list of compatible Blu-ray burners? BTW I am using Windows 8.1.

Attached is a screenshot of the dialog box that opens up when I place a regular DVD or Blu-ray in my desktop computer.
In order for me to burn a DVD project in premiere elements if I do not initialize the disc with the above procedure I receive a media not present in the settings box of premiere elements. I assumed I have to do the same thing with a Blu-ray too. I've tried following this procedure, also tried using the live file system. Also tried putting a fresh disc in without doing anything to it and always receive the media not present in the status setting. One suggestion has been that another program is interfering with premiere elements. I will also go out and purchase some Verbatim BD-RE disc, whether they work right now or not I can always use them later after I solve my problem.
I Have a lot of great suggestions from you guys and I really appreciate it. I'm going to work on some of those today starting with loading imgburn and see if I can indeed burn a Blu-ray disc with my system. I have already created a AVCHD BDMV file on my computer and I will start with trying to work with that and see if that is successful and then come back to premiere elements. I appreciate the input regarding Cyberlink software. I have version 8 (came with my Pioneer Blu-ray Drive) and was thinking about upgrading to the latest version but with your input regarding Power Producer I will save my money.
Another thought I had, with Blu-ray disc burners being as cheap as they are purchase one that has been proven to work with premiere elements 12.1. Time is money, the cost of a new Blu-ray burner is insignificant. I will consider this option later.

I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

Can not burn to dvd or blue ray disk

Similar Messages

Maybe you are looking for