Can not call RFC inside VC

Hi everybody,
i use a RFC in my VC. The local test of the R/3 RFC within NWDS (Test Data Service) runs with success. But if i start the Application and call this RFC i get the following error:
Error in getting the connection Could not find destination XXX
Error occurred while executing the service: Could not get connection to the backend XXX
Error Occurred  while executing the service: Error occurred while executing the service:
Could not get connection to the backend XXX
Please help...
Thanks,
Sid

Hi Sid,
If you are working with NWDS, except for defining the destination in the NWDS you also have to define the same destination in the WAS you deploy to. That is because the runtime environment for your model (the WAS) also has to connect to the destination.
A system administrator can define the destination from NetWeaver Administrator (/nwa).
Best regards,
Tal.

Similar Messages

  • Can not call RFC contains "call transaction"  in webdynpro

    We use Webdynpro to develope a UI that can create service orders in CRM
    system. We create an RFC funciton "ZKLEE_CRM_ORDER_MODIFY" in CRM,which
    contain a statement of "CALL TRANSACTION 'CRMD_BUS2000120' USING T_BDC
    MODE 'N' MESSAGES INTO MESSTAB.".
    But as we exacute the RFC from WEB,we got 3 error messages in the
    output "MESSTAB":
    1.MESSAGE ID = "DC",MESSAGE NUMBER = "006", MESSAGE = "Control
    Framework: Fatal error - GUI cannot be reached".
    2.MESSAGE ID = "SY",MESSAGE NUMBER = "002", MESSAGE = "Exception
    condition CNTL_ERROR raised."
    3.MESSAGE ID = "00",MESSAGE NUMBER = "359",and it is a terminate
    message.
    The problem is that we can use webdynpro to call RFCs that do not
    contain "call transaction" freely. At first we suspect that it is our
    RFC function's fault, but we tried it in ABAP enviroment,and it works
    OK. We also tried to call this RFC in JSP through JCO,the same error
    occurs.
    Our system enviroment is CRM 4.0, J2EE 640, kernel 640 patch 109.

    HI,
    Thank you for your information.
    Maybe you are right that BAPI/RFC can not contain "call transaction" statement. But two weeks ago, one of my colleagues tried to use "call transaction" in RFC through JCO in our R/3 enviroment(not in CRM),and he successed.
    So I suspect the kernel release. The kernel of R/3 is 640,while CRM is 620(I said our CRM kernel release is 640 before,and it is a mistake.).I will confirm whether what my colleague said is right by myself, and will also told you the result.
    Message was edited by: Vincent zklee

  • Blackberry 8520 I can not call or write sms

    I can not call or write sms, mobile network signal and my phone shows sim card is fine in another phone works

    Hi and Welcome to the Community!
    Is it possible that your BB remains locked to another carrier? If so, that would explain this behavior...refer:
    http://supportforums.blackberry.com/t5/General-BlackBerry-Functions-and/Unlocking-your-BlackBerry-Gu...
    Otherwise, your SIM could be incompatible with your BB...for which you would need to talk to your SIM provider.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk

    How to log in with my old Apple account? I forgot my pass and I did change my apple ID before canceling first?? I am from Croatia so did folow al the discussion and the to resolve the problem but no luck. Can not call from Croatia the Apple help desk.i did try all the options but I can not find the phone number to call from Croatia,
    I can not change my Apple ID to the old mail (not possible!)
    The old mail don't accept the new password..
    I can not delete the Icloud all the time asking my the password of the old mail!
    I realy need help

    You can not merge accounts.
    Apps are tied to the Apple ID used to download them, you can not transfer them.

  • My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything

    My iphone is gray or black it is functioning but you can not see the screen so I can not call or text or anything,  I have a child that is very ill and I have to have access to a phone at all times can someone help me?  It happened one other time when I plugged it in to my to listen to music.  I know it is working it said something on voice control.  I tried the press the circle button and the top button but the screen only turned white?

    Try the following:
    - A reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Restore from backup
    - Restore to factory settings/new iPod.
    If you still have the problem that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order

  • TS3367 I can call my friend threw her face time, but she can not call me.

    My face time is able to call all my friends threw their face time.
    But when it comes to one of my friends, she can not call me or message me threw face time, she can't call anyone threw face time.
    I can't seem to figure out how to get hers to be able to call me.
    This is threw our I touch.
    Can someone help?
    Kristina

    shania11lp wrote:
    it didn't give me an i touch option
    Probably because there is no such thing as "i touch".
    It is iPod touch and the troubleshooting does call it out.
    "If you encounter an issue making or receiving a FaceTime call, verify you have the following:
    iPhone 4 or later, iPad 2 or later, or iPod touch (4th generation), with the latest available version of iOS."

  • In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!

    In my iPhone 4s, since I updated to the latest iOS 6.1.2 I have noticed that my battery drains very quickly, and that after 15 days after date, I lost the cell signal, I have 3g, but I can not call or receive calls or sms. HELP!
    Sorry for my bad english :S
    Please, please help me

    Contact the carrier.

  • IPhone5 iOS8.02 can not call

    Hi
    I updated yesterday to iOS8.02 on my iPhone5 and can not call anyone.
    It is the same with my work telephone iPhone4S. Updated yesterday to iOS8.02 and it do not work to call on.
    No difference if a press a new number or use old contacts in my contact list.
    The time to dial is mostly long and ends with call failed (in Swedish: - samtalet misslyckades)
    Any proposals?
    Christer___________________________

    New information on this issue:
    Both telephones uses the same telephone providing  company and when I changed location all worked well.
    A bit unlikely that the provider had a issue just after I updated to iOS8.02.
    So I was fooled by a telepohone company antenna problem at my location.
    Sorry.
    Christer

  • Why button can not call its script?

    I did very simple work: open Director MX 2004, click the
    button icon on the Tool Palette, and draw a button on the stage.
    Right click it and menu appear. Click "Scripts..." and script
    window opens. MouseUp() event function is there already. Write
    something in mouseUp(). Anything is OK. Put a breakpoint on some
    line.
    OK, then click menu Control-Play to run the movie. Click the
    button on stage. At this time, it ought to be broken on the
    breakpoint. But it didn't. The mouseUp() was not called!
    On the other hand, other controls are OK, such as Text,
    Shape, etc.. Only botton can not call its script. Is it a bug of
    Director MX 2004?

    It may be that you're creating flash component buttons. Try
    setting the tool palette to 'classic' mode (the dropdown at the top
    of the tool palette). The buttons you create once you've done this
    will be native director buttons.
    I've not really used flash component elements much at all so
    I can't offer advice as to why the mouseup isn't working with it.
    - Ben

  • N73 - Can not call contacts

    Sometimes I cant call my contacts or the caller log. This error have followed me through all the firmware upgrades, but it is still the same.
    The error occurs from time to time and nothing happens when I press the green button. When I open caller log I can see all numbers but nothing happens when I press green. Same happens with contact list. I can open contacts, open details, but when I press "voicecall" nothing happens.
    I can dial number manually and then call them. I can also send messages to contacts, but I can not call them in other ways than pres the number manually
    The only thing that helps is a reboot.
    Does anyone have any experience with this?

    faizalajith wrote:
    In N73 a major problem or error occurs it is "*u cant dial contact in ur phone directly*" but manually u can dial by entering the whole number.
    There no fix till now only option was *switch off & on*.. which is still annoying..
    i have noticed
    *v home* software is a fix for it
    only use v home screen to dial number.
    Settings in Vhome for
    "dial contact by name" is
    >settings>smart dialling>name alone.
    Still u dont want to switch off the phone every time go 4 vhome....
    Download Here
    gallery.mobile9.com/f/2507590/
    Hi,
    Welcome to the forum!
    Try to perform the restore factory settings. Note that your files won't be deleted. To do this, go to Tools and then Settings. Select General and then Orig. phone settings. Enter the security code or the lock code. The default code is 12345 unless you changed it. If that didn't work, it's best to have your phone physically checked at the Nokia Care Point. They'll be able to help you with your concern. Note that charges may apply for the out of warranty phone.
    You can visit this link for your local support page for further assistance: www.nokia.com/support

  • Who can tell me if it right I can not write rfc with bdc?

    Dear experts,
            I want to write a rfc with BDC so that vs.net can use this rfc, but I find it can not be used. who can tell me if it right I can not write rfc with bdc?
    Best Regards,
    Shinny

    Hi Shinny,
    Can you explain what error are you getting a little briefly. Coz you can write BDC in Function Modules.
    Thanks,
    Prashanth

  • Can EE Customer service call me on my phone? I can not call to UK from abroad

    URGENT Can EE Customer service call me on my phone?  I can not call to UK from abroad

    Hi ,
    Very sorry this is a public forum no calls can be made.
    How can I help with your query?
    Thanks.

  • HT201412 My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

    My 4s is not picking up phone signal I do not no how to sort this out I have tried resetting it and its not working still I do receive messages and can send them but can not call as it just says call fail

    Try resseting the network settings in settings>general then go to reset a the bottom.
    Then reset NETWORK settings.

  • Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server

    Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server.
    I wrote the Server Application with Tuxedo version 8.0.
    And used tuxedo71 WS client to call the service.
    The client application displayd tpinit fail.
    ULog told me "prv7.1 not allowed,use -t option on wsl".
    Is there any way to solve this problem?
    thanks!

    risen,
    Yes there is a way to solve this. As the error message suggests, use the -t
    option on your WSL server. Look at
    http://edocs.bea.com/tuxedo/tux80/atmi/secadm10.htm#1284650
    [ I know this documentation is astonishingly well hidden! ]
    Peter.
    risen wrote:
    Why tuxedo7.1 or Tuxedo6.5 can not call the service on Tuxedo8.0 server.
    I wrote the Server Application with Tuxedo version 8.0.
    And used tuxedo71 WS client to call the service.
    The client application displayd tpinit fail.
    ULog told me "prv7.1 not allowed,use -t option on wsl".
    Is there any way to solve this problem?
    thanks!

  • My iphone 5 for some reason can receive calls, send & receive texts but can not call out

    My iphone 5 for some reason can receive calls, send & receive texts but can not call out

    I am not sure if this issue is going to help you but lets give it a try.
    I know that where im from, which is the Netherlands, I am not able to sent e-mails from my iPhone or any other mobile device by using 3G or a random WIFI acces point. The provider only allowes you to sent e-mails when you are connected to a network of there own. Which means if you have provider "101" and your email settings are set up for this provider in your iPhone but your using the network of a friend of yours which is provider "202" you cannot sent emails from his network. Though you can receive them you may not sent.
    As I said, I am not aware if this issue is the same for you totaly depents on the country and provider your using.

Maybe you are looking for