Can not capture. Anymore.

Ok so I have a Sony HC52 and I'm using an ilink firewire cable to capture my footage. I have been able to capture for months and then the other day it stopped working. When I connect the camera with the ilink cable and try to capture, FCP does not recognize the camera. I tried capturing with QuickTime Pro also and the camera is still not recognized. As far as I know there are no drivers needed for the ilink cable. Does anyone know what’s going on? Or has anyone else had this problem? ANY help would be appreciated. Thanks.

have you tested another Firewire DV cable to see if the cable is bad? Have you tested that Firewire port on the computer with another hard drive to make sure it's working? You can also go into System Profiler and check to see if the computer recognizes that a device is plugged into that port.
BTW, how is Seattle looking right now. I love it there. Lived just outside for a year and it is my favorite city in the US.
Message was edited by: RedTruck

Similar Messages

Can not capture from Sony HDV 1080i (recording in 60i)

Hello
We are trying to capture from the above camera to a Mac Dual G5. We are using FinalCutPro 5.1.2. We are using a FireWire 400 cable to connect to the front of the computer (have also tryed back of Cinema Display). The footage was captured in HDV1080/60i, and we have tried the corresponding formats in Easy Setup (Basic, standard, Apple Intermediate).
The problem: we can control the camera from the Log and Capture windows, but when starting capture, no data is coming in, and the program therefor gives up after a few seconds (displaying a no data error message).
We have tried Batch and Now capture. We can log clips, and get the correct time code, but can not capture those clips due to the no data problem.

This is a good workaround for curing your camera recognition problem with FCP (if that's what it is):
First, check that your Easy Setup / Timeline / Camera or Deck Settings are all exactly the same, then making sure your camera or deck is in VTR mode, try to capture again.
FCP uses a different form of QT than iMovie for capturing, so if the camera works in iMovie (or if it's listed in System Profiler) but not FCP, it obviously means your Mac can see the VTR but FCP can't, so you need to do this QuickTime fix.
http://docs.info.apple.com/article.html?artnum=301852
Follow the instructions carefully and you should have things running in no time - it's quite safe but you must Trash the Receipts AND re-install QT from the link provided.
If the Camera / Deck isn't recognised by iMovie or System Profiler, try resetting the Firewire Bus . . . Turn off the Mac and disconnect the power and all Firewire cables. Leave it for 30 mins then connect back up.
Still not working? Try a different Firewire cable.
Failing all this, try resetting the PMU (Power Management Unit). The method varies from machine to machine, so visit the Apple site and search for it in support.
Don't use iMovie for capturing - it doesn't give you a timecode and that's very important.
Let us know how you get on!
Andy
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Sony HVR Z1E Mac OS X (10.4.7)
"I've taught you all I know, and still you know nothing".

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?

After upgrading to 10.7.5 some of my AU plugins can not be validated in Logic pro. (I got error message "Remove property listener". I can not work anymore. What should I do?
VIBAC

I downloaded and installed
OS X Lion 10.7.5 Supplemental Update
and that solved my problem completely. (368 AU plugins now works!)

My computer is off and set up on Japanese. I can not login anymore because I type the password in English but the keyboard was set up last in Japanese language.how can I change the language by using the keyboard only so that I can write in English my pass

Hi
My computer was shut down. It was set on Japanese Hiragana language before shutting down. Now I want to login with my password in English. Yet, teh keyboard was set in Japanese and thus, I can not login anymore. How can I reset/change from Hiragana Japanese mode to Englsih ( US) with some shortcuts on my keyboard?
thank you

Try Apple/Command + space.
For the future, go to system prefs/accounts/login items and check the box for Show Input Menu on Login Screen.

Can not capture

Upgraded Premiere Pro, Have bought the new mac computer. Using a Canon DV camera, and can not capture any footage from my DV tapes. Have tried everything!!! Premiere just say Capture Device Offline,. Read through many threads and have got no idea how to fix. Help me Please... I just bought this MAC and now its useless if i can't use it to edit
Even tried all the steps on the web bpage, i do not have a firewire, the USB port i use to plug in are through an AV device (yellow, red, white cables) that then filter through top a USB port cable and plugged into the back of my computer.

I mean it's the new Mac do it's just a thin screen, I would rather leave it and have an external cord.
Why has Mac not allowed for this, they are suppose to be the best & up to date with video software?
Unfortunately, Apple knows best, and will dictate that to its loyal users. They must adapt to the "party line," or move to a PC. That is just the way they think.
Sorry for the bad news,
Hunt

Can not capture with CS6 and blackmagic multibridge pro on HP Z820

This is the setup:
Z820 and Windows 7 pro
Multibridge Pro and driver 9.7.7
CS6.0.5
In premiere I can not capture via the Multibridge. The app crash when entering capture mode. I can not change setting in my capture device.
On the same PC I CAN capture with Media Composer v7 and BM Media Express.
I've tried several version of the BM driver, no changes.
The BM PCIe card is in slot 1 and the PC bios I have update to v3.50.
Anyone having the same experience?
Regards
Danny

Thanks for the reply. I know YouTube is not the way to check quality but it shows the stutter in playback. The quality wasn't the issue and it is filmed with my phone. The video shows what it needs to show.
Disk setup is a ddp server (check http://www.dynamicdrivepool.com/ for info) connected with 2 network cables for optimal speed.
Video cars is a NVIDIA Quadro K4000.
Premiere Pro CC is up to date with the latest version.
Export settings? I think you mean sequence settings:
For the record: I'm not trying to play a sequence with multiple layers of video of different codecs and loaded with effects. It's just a video chopped to pieces and an adjustment layer with some simple effects. The way Adobe is advertising the performance of Premiere Pro, one would think that couldn't be a problem for any Z820. Or that's what I was thinking. Hope you or anyone can help.

After I updated the iOS version on 11/23/13, I can not access anymore my Pages. It says it's updating. How long would this take to update?

After I updated the iOS version on 11/23/13, I can not access anymore my Pages documents. It says it's updating. How long would this take to update?

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

Lightroom Book: I have saved a book in progress and now I can not add anymore photos to the filmstrip. How can I change this? Help! (and thank-you).

Lightroom Book: I have saved a book in progress and now I can not add anymore photos to the filmstrip. How can I change this? Help! (and thank-you).

How to add photos to a saved book?

ODI can not capture RRN (rowid) in DB2/iSeries

HI, all . I found that we can not config ODI to get the RRN (rowid) when CDC by reading journal . Any idea ?

Hi, Thanks for your reply . it's great help .Please help me with these concerns :
1. If ODI can capture missed transaction journal ,they must know the last journal 's information of a table .where these information stored ? In ODI Reposistory ?
2.For CDC , if the source database is restored by the backup set of yesterday .Can ODI re-synchronized these change to the target datase or we have re run Load data ?
4.For journalling in DB2 , If the changes are created by a mirror tool from another DB2 database , does these changes are recorded in native journal ?
3.We have a target table is partitioned by date time ranged , the data in the target table is OFFLINE if the data is <sysdate -90 .
The source table in DB2 is not partitioned , data is fully ONLINE , if there are some DML happend in the data which older than sysdate-90 in the source table , how can these change reflect to the target table ?
4.Can CDC installed in MySQL , we have several MySQL Database
5. We would like to use native journal , not trigger in CDC for source database in DB2 . We found that there are some limitation of native journal , such as the number of primary key columns must be not exceed 16 .
For a given physical file( a table) in DB2 , it has the number of primary key 's column are 18 ( dued to the designed is created in 2000) , we found some error when declare primary key in source table in ODI Designer .
How can we overcome this limitation ?
6.Can ODI capture TRUNCATE command in DB2 source database ?

Help, I can not capture Audio Pinnacle to a flash media player encoder 2.5

Help Please ...... As you can do to capture in Adobe Flash
Media Encoder 2.5 audio moviebox A Pinnacle Studio Plus, since only
TE Tom THE video, but does not capture the audio, and therefore I
have a delay in the video against Audi. Do I configure Encoder
2.5.

Here is the fix:
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=29191

N95 can not phone anymore ! Help please !

Hello,
I got my N95 8g 1 week ago.
I updated the mobile with "nokia software updater" but the phone can not hook on any network to call since.
I can go on internet (wlan) but I can t call or receive anything !
And when I try to connect the phone "manually", it finds the networks but freeze when I tell him to join it !!!!
When I put the SIM card to another phone, it works fine !
Thanx in advance for your help

Rebuild your iPhoto Library.
Instructions here > Rebuilding the iPhoto library
I tried to set up iCloud yet my computer will not even give me the option. Everything is updated too..
"iCloud requires iOS 5 or later on iPhone 3GS or later, iPod touch (3rd generation or later), iPad, or iPad mini; a Mac computer with OS X Lion v10.7.5 or later."
Apple - iCloud - Learn how to set up iCloud on all your devices.
Just because everything is updated, doesn't necessarily mean you have the OS X installed that meets iCloud requirements.
You can see which OS X is installed by clicking the Apple () menu top left in your screen. From the drop down menu click About This Mac
The version is noted there.

Unable to initialize video deck, (can not capture from camera)

Hello All,
I am using a quad core G5 and am trying to capture some footage into Final Cut Pro version 5.0. I have two Panasonic DVX 100B mini DV cameras. I normally capture with a JVC BR-DV3000 mini DV deck but it is currently not working. So I'm trying to capture using my camera.
I hooked my camera up to my computer via firewire and started final cut, When I click File > Log and capture a little window pops up that reads:
" Unable to initialize video deck. You may still log offline clips or use Capture Now"
I'm not sure why this box is appearing. When I click the capture now button, the Capture window pops up and then I press play on the video camera and the footage plays on the camera but the capture window remains black or empty. I have tried both cameras and two different firewire cables with the same results. I have also tried to restart the computer.
Can anyone shine some light on this situation?
Thank you so much for your help.
Mike Wardynski

Are there any other firewire devices connected to your Mac?
Did you go into your easy setup and reselect the DV setting for the standard you are using?
Also sometimes, shutting down and restarting your Mac, after making these changes some times allows the new device to be recognized.
One other thing, the DV camera may have a menu setting that needs to be set for communication via firewire possibly?

Can't capture anymore.. please help!

hi,
i've been using mdt 2010 in the last 4ish years to deploy several hundreds of machines. now due to some mysterious reason, capturing doesn't work anymore. the visible symptom is a error message containing something about the clonetag registry entry not being
writeable. i hacked around this by regedit'ing the clonetag value back in, but the result was an image that doesn't join the domain. i also deactivated the "inject mass storage driver" step and the wmp net service, but no luck.
i don't know why sysprep fails all of a sudden. all i did was update the image with a few software installations and updates. when i try to sysprep without saving the image to the mdt deployment share, it reports that it completed successfully. if i save the
image, it reboots and continues with the deployment task. which fails with the clonetag error. i've tried it with and without installing the latest windows updates. the image size is around 10 gigs, free space on the ds is around 40 gigs. after an unsuccessful
capture attempt, the local admin account is locked and the hidden system partition has a drive letter.
please help me find the error..
my logs are here (hopefully)
thanks,
haklinz

Hi,
I'll suggest you to try the following solutions:
http://supportishere.com/test-for-clonetag-in-registry-error-during-a-capture-of-windows-xp/
http://social.technet.microsoft.com/Forums/fr-FR/243f3245-5f7c-4f0b-b55b-ddda27081385/failed-to-run-syspref-test-for-clonetag-in-registry-to-verify-sysprep-completed?forum=mdt
/ Yannick Plavonil
blog: Deploiement Windows
twitter: @yplavonil
facebook:
www.facebook.com/deploiementwindows

I can not export anymore? final cut pro x

i used to be able to export but i can seem to do it anymore (10.0)

You are using 3 year old version of FCPX you must upgrade to the latest version. 10.0 does not work with Mavericks. Did you buy your copy from App Store ?

Can not Capture on Quad

Greetings all. I have a Canon GL2. I am having trouble capturing with it on my Quad. After searching the forum I see that for some reason people are having trouble capturing with Canon products. What's weird is that I can capture on my Powerbook which has the same exact OS and software but not on the Quad. Is there a reason for this? FCP does not recognize the camera in Capture 'mode' but will not start up (when the camera is plugged in via firewire) until the camera is disconnected. What's going on?
Further, imovie doesn't recognize the camera either.
Would a capture card make capturing more stable? This is very frustrating.

Time for the Harpoon solution.
shut down the computer
turn of any external drives
turn off the camera
unplug the computer from the power
unplug the firewire devices from the computer (remove cables from ports)
get up from computer
walk to refrigerator
grab your favorite beverage
enjoy beverage
if 5 minutes are not up - enjoy another beverage
walk back to edit area
plug in firewire devices & computer power
start camera
start computer
launch FCP
attempt capture.
Does it work now?
If yes, enjoy life.
If no, does it capture in iMovie
If yes, you probably need to reinstall quicktime - if running 7.0.4 try downgrading to 7.0.1
If no, you have other issues. Try removing any external firewire drives, swapping cables or cameras.
Good luck.
x

Can not capture. Anymore.

Similar Messages

Maybe you are looking for